back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Smith Machinery Co

1287 W Avenue
Ames, IA 50014
Platinum Level Dealer
Surplus Record Dealer Since 2001

About

Smith Machinery Co. buys & sells one piece or entire plants, rebuilds your
equipment in our plant or on your site & wants your surplus equipment.

Products & Services

  • Brakes, Press
  • CNC Machinery
  • Lathes
  • Milling Machinery
  • Presses
  • Saws
  • Shears
  • Welding Equipment

Associations & Affiliations

Smith Machinery Co has 632 listings in 156 categories.

60 Hz Single Phase Transformers

3 Results
Image for 37.5 KVA 240/480 Primary, 120/240 Secondary, Square D, single phase transformer

37.5 KVA 240/480 Primary, 120/240 Secondary, Square D, single phase transformer

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Square D
Image for 45 KVA 240/480 Primary, 120/240 Secondary, Square D /Sorgel, single phase transformer

45 KVA 240/480 Primary, 120/240 Secondary, Square D /Sorgel, single phase transformer

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Square D
Image for 50 KVA 217/508 Secondary 120/240 Secondary, General Electric, single phase transformer

50 KVA 217/508 Secondary 120/240 Secondary, General Electric, single phase transformer

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: General Electric

Abrasive Saws

1 Result
Image for 16-3/8" Allison Campbell, abrasive saw, 20 HP, 3225 RPM, (2) roller conveyors, cutting disk, coolant tray, manual, air vise
Image for Trion #Big Mac, cartridge system air cleaner

Trion #Big Mac, cartridge system air cleaner

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Cleaners
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Trion
Model: BIG MAC
Image for United Air Specialists #MA, crystal-aire air cleaner, s/n 60009062-1293

United Air Specialists #MA, crystal-aire air cleaner, s/n 60009062-1293

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Cleaners
Seller: Smith Machinery Co
City: Ames, IA
Mfr: United Air Specialists
Model: MA
Image for 35 cfm, 200 psi, Zeks #35HSDA100, air dryer, S/N 84070-3, 115 V.

35 cfm, 200 psi, Zeks #35HSDA100, air dryer, S/N 84070-3, 115 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Zeks
Model: 35HSDA100
Image for 400 scfm, 100 psig, Kellogg #400, air dryer, 300 psi air test, 200 psig max. operating, ser.842445

400 scfm, 100 psig, Kellogg #400, air dryer, 300 psi air test, 200 psig max. operating, ser.842445

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Kellogg
Model: 400
Image for Atlas Copco #FD30 CSA/Ul, compressed air dryer, s/n 554729, 2000

Atlas Copco #FD30 CSA/Ul, compressed air dryer, s/n 554729, 2000

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Atlas Copco
Model: FD30 CSA/UL
Year: 2000

Air Compressors, Rotary Screw (Positive Displacement)

8 Results
Image for 95 cfm, 125 psig, Ingersoll-Rand #SSR-EP25SE, 25 HP, serial number: KE1047U95123, pre-owned

95 cfm, 125 psig, Ingersoll-Rand #SSR-EP25SE, 25 HP, serial number: KE1047U95123, pre-owned

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Ingersoll-Rand
Model: SSR-EP25SE
CAPACITY --- 95 CFM. RATED OPWERATING PRESSURE --- 125 PSIG. MAX. DISCHARGE PRESSURE --- 128 PSIG. MAX. MOSULATE ...more
Image for 332 cfm, 125 psig, Ingersoll-Rand #SSR-EP75, 75 HP, air cooled, Intellisys Control, #82725

332 cfm, 125 psig, Ingersoll-Rand #SSR-EP75, 75 HP, air cooled, Intellisys Control, #82725

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Ingersoll-Rand
Model: SSR-EP75
Image for Champion #VR5-8, vertical air compressor, 2-stage, 5 HP, S/N R1588995, #84313

Champion #VR5-8, vertical air compressor, 2-stage, 5 HP, S/N R1588995, #84313

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Champion
Model: VR5-8
Image for Ingersoll-Rand #242-5N, Air Compressor, S/N 30T-603172Z

Ingersoll-Rand #242-5N, Air Compressor, S/N 30T-603172Z

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Ingersoll-Rand
Model: 242-5N

Ingersoll-Rand #2475, air compressor, S/N 1229075Z

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Ingersoll-Rand
Model: 2475

Smith Machinery Co has 3 more listings in Air Compressors, Rotary Screw (Positive Displacement).

Image for 12" x .062" Cooper Weymouth, Air Feeder, 1-1/2" bore, 60 SPM, 12" width, S/N 6-1917

12" x .062" Cooper Weymouth, Air Feeder, 1-1/2" bore, 60 SPM, 12" width, S/N 6-1917

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Feeders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Cooper Weymouth
Image for 12" x .14" Coe Press Equipment #CF-200, air feed, 2" bore dr.cylinder, 100 psi,.140" stock thick, #81905

12" x .14" Coe Press Equipment #CF-200, air feed, 2" bore dr.cylinder, 100 psi,.140" stock thick, #81905

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Feeders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Coe Press Equipment
Image for 12" x 6" Air Feeds #AF-1, Air Feeder, manual pass line adjustment

12" x 6" Air Feeds #AF-1, Air Feeder, manual pass line adjustment

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Feeders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Air Feeds
Image for 12" Cooper Weymouth, 4-Roll Air Feed, S/N 124899

12" Cooper Weymouth, 4-Roll Air Feed, S/N 124899

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Feeders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Cooper Weymouth
Image for 18" x .25" Coe Press Equipment #CF500, Air Feed, 18" stroke, S/N H052815

18" x .25" Coe Press Equipment #CF500, Air Feed, 18" stroke, S/N H052815

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Air Feeders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Coe Press Equipment
Image for 2 Ton, Dayton #2, Arbor Press, 5 -1/2" throat, 8" daylight, mounted on pedestal

2 Ton, Dayton #2, Arbor Press, 5 -1/2" throat, 8" daylight, mounted on pedestal

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arbor Presses
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Dayton
Model: 2
Image for 20 Amps, Airco #2-ADT224A, arc welder

20 Amps, Airco #2-ADT224A, arc welder

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arc Welders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Airco
Model: 2-ADT224A
Image for 33 Amps, Miller #CP-300, Arc Welder, 12.3 KW, WF-017 wire feed, power & gas linses, s/n JD668948

33 Amps, Miller #CP-300, Arc Welder, 12.3 KW, WF-017 wire feed, power & gas linses, s/n JD668948

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arc Welders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Miller
Model: CP-300
Image for 39 Amps, Miller #Mc300VD, AC/DC, 11.9 KW, 200/460 V., ser.JF909910

39 Amps, Miller #Mc300VD, AC/DC, 11.9 KW, 200/460 V., ser.JF909910

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arc Welders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Miller
Model: MC300VD
Image for 39 Amps, Miller #MC300VS, DC Arc Welding Power Source, 11.9KW, Millermatic S-54E feed system, ser.JJ426215

39 Amps, Miller #MC300VS, DC Arc Welding Power Source, 11.9KW, Millermatic S-54E feed system, ser.JJ426215

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arc Welders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Miller
Model: MC300VS
Image for 55 Amps, Craftsman #113.201251, Arc Welder, single phase, 230 V.

55 Amps, Craftsman #113.201251, Arc Welder, single phase, 230 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Arc Welders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Craftsman
Model: 113.201251

Smith Machinery Co has 8 more listings in Arc Welders.

Bar, Pipe and Tube Benders

7 Results
Image for 3/8" Richards Multiform #6H, Hydraulic Bender, 6 ton, 1/4" x 2" bending capacity, S/N F197

3/8" Richards Multiform #6H, Hydraulic Bender, 6 ton, 1/4" x 2" bending capacity, S/N F197

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Richards
Model: 6H

1-1/2" Greenlee #777, hydraulic conduit, #84394

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Greenlee
Model: 777
Image for 1-1/2" DiAcro #8, hydraulic bender, 1000 psi, 6-12 RPM, 3-1/2" bore, 3 HP, 230 V., S/N 1580580261

1-1/2" DiAcro #8, hydraulic bender, 1000 psi, 6-12 RPM, 3-1/2" bore, 3 HP, 230 V., S/N 1580580261

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Diacro
Model: 8
Image for 2" Clark & Lewis #Cl200HD, 2" draw type, s/n 1247

2" Clark & Lewis #Cl200HD, 2" draw type, s/n 1247

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Clark & Lewis
Model: CL200HD
Image for 2" Hossfeld #2 Bender, 1/2" x 4-1/2" heavy flat bars, 5/8" eye bolts

2" Hossfeld #2 Bender, 1/2" x 4-1/2" heavy flat bars, 5/8" eye bolts

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Hossfeld
Model: 2

Smith Machinery Co has 2 more listings in Bar, Pipe and Tube Benders.

Image for Kearney & Trecker #205S-12, 12" x56" table, 28" long., 12" cross, 5 HP, 25-2000 RPM

Kearney & Trecker #205S-12, 12" x56" table, 28" long., 12" cross, 5 HP, 25-2000 RPM

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Kearney & Trecker
Model: 205S-12
Image for Summit #3UH, horizontal mill, 12.75" x60" table, 27.5" long., 9" cross, 10 HP, S/N 7517, 1982

Summit #3UH, horizontal mill, 12.75" x60" table, 27.5" long., 9" cross, 10 HP, S/N 7517, 1982

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Summit
Model: 3UH
Year: 1982
Image for Alliant #1158-5V, vertical milling machine w/DRO, 11" x58" tbl, 5 HP, s/n K5V-1156, pre-owned

Alliant #1158-5V, vertical milling machine w/DRO, 11" x58" tbl, 5 HP, s/n K5V-1156, pre-owned

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Alliant
Model: 1158-5V
WORK TABLE---11" x 58". X AXIS TRAVEL---43". Y AXIS TRAVEL---15 1/2". Z AXIS TRAVEL---19 5/8". QUILL DIAMETER---4.14". QUILL ...more

Alliant #RT2, vertical mill, 9" x42" table, 60-4500 RPM, 5" spindle travel, S/N 0031588

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Alliant
Model: RT2
Image for Bridgeport #Series-I, vertical milling machine, 9" x42" table, 1 -1/2 HP, serial #173239

Bridgeport #Series-I, vertical milling machine, 9" x42" table, 1 -1/2 HP, serial #173239

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Bridgeport
Model: SERIES-I

Bridgeport #Series-I, vertical mill, 9" x 42" table, 2 HP, 60-4500 RPM, 5" spindle travel, S/N 192784

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Bridgeport
Model: SERIES-I

Smith Machinery Co has 11 more listings in Bed and Knee Milling Machines - Vertical.

Image for 4" x 12" Jet Belt Disc Grinder

4" x 12" Jet Belt Disc Grinder

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Grinders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Jet
Image for 104" width x 180" H x 456" L Therma-Tron-X, in-line dry-off oven, FM gas train 208 MBTU, 700 CFM, 25 HP, 4" S.P

104" width x 180" H x 456" L Therma-Tron-X, in-line dry-off oven, FM gas train 208 MBTU, 700 CFM, 25 HP, 4" S.P

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Ovens
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Therma-Tron-X
Image for 300" width x 960" L x 146" H Therma-Tron-X, In-line powder cure oven

300" width x 960" L x 146" H Therma-Tron-X, In-line powder cure oven

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Ovens
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Therma-Tron-X

Belt Sanders

6 Results
Image for 2" x 44" Powermatic, on/off switch, direct drive, 1/2 HP, 1725 RPM, 115 V., 2005

2" x 44" Powermatic, on/off switch, direct drive, 1/2 HP, 1725 RPM, 115 V., 2005

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Sanders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Powermatic
Year: 2005
Image for 4" x 16" Porter Cable #04, belt sander, S/N 532

4" x 16" Porter Cable #04, belt sander, S/N 532

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Sanders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Porter Cable
Model: 04
Image for 6" Oliver, belt sander, horizontal with large table

6" Oliver, belt sander, horizontal with large table

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Sanders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Oliver
Image for 36" Timesavers #237-1B, Speedbelt sander, 20-60 FPM, 30 HP, 6" steel drum, S/N 10660, 1980

36" Timesavers #237-1B, Speedbelt sander, 20-60 FPM, 30 HP, 6" steel drum, S/N 10660, 1980

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Sanders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Timesavers
Model: 237-1B
Year: 1980
Image for 37" Timesavers #137-1-HDM, wide belt sander, 0"-8" material thickness, 37" x 60" belt size, 2900 SFM, S/N 17162, 1985

37" Timesavers #137-1-HDM, wide belt sander, 0"-8" material thickness, 37" x 60" belt size, 2900 SFM, S/N 17162, 1985

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Belt Sanders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Timesavers
Model: -137-1-HDM
Year: 1985

Smith Machinery Co has 1 more listing in Belt Sanders.

Bending and Curving Rolls

1 Result
Image for 18" gauge x 24" Acrotech #1824, air/hydraulic press roll, 16 FPM, 3-1/2" diameter steel roll, 1 HP

18" gauge x 24" Acrotech #1824, air/hydraulic press roll, 16 FPM, 3-1/2" diameter steel roll, 1 HP

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Acrotech
Model: 1824

Bevelling Machines

1 Result
Image for No. TKF-153 Trumpf, Bevelling Machine, 0.6" max length of bevel, stand & tool case, S/N 783554

No. TKF-153 Trumpf, Bevelling Machine, 0.6" max length of bevel, stand & tool case, S/N 783554

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Trumpf
Model: TKF-153
Image for 250 Gallon Plastic Totes with cage (17 available)

250 Gallon Plastic Totes with cage (17 available)

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Bins
Seller: Smith Machinery Co
City: Ames, IA

Booth and Cabinet Blast Cleaning and Shot Peening

1 Result
Image for Cascade #550-2800, Iowa Eng., deburring, cleaning, 550 lb.cap.part., 28" work, 1996

Cascade #550-2800, Iowa Eng., deburring, cleaning, 550 lb.cap.part., 28" work, 1996

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Cascade
Model: 550-2800
Year: 1996
Image for Deimco #MD1600, 48" W x 48" H opening, 1600 cfm @ 4.0" wc, 2.08:1 air/filter ratio, #80948

Deimco #MD1600, 48" W x 48" H opening, 1600 cfm @ 4.0" wc, 2.08:1 air/filter ratio, #80948

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Deimco
Model: MD1600
Inv #: 80948 . (1) PREOWNED DEIMCO POWDER PAINT BOOTH.
Image for Iontech manual booth, in-line, 4 walk in operator stations

Iontech manual booth, in-line, 4 walk in operator stations

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Iontech
Image for Iontech powder booth, in-line automatic, 25 Parker-Ionics automatic guns, 2 manuals guns

Iontech powder booth, in-line automatic, 25 Parker-Ionics automatic guns, 2 manuals guns

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Iontech
Image for Nordson #Versa-Spray II, manual spray gun with control, 60-100 psi air input, 20 psi, 3 gauge control, 240 V.

Nordson #Versa-Spray II, manual spray gun with control, 60-100 psi air input, 20 psi, 3 gauge control, 240 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Nordson
Model: VERSA-SPRAY
Image for Nordson, Sure Coat manual spray gun with control, 80-90 psi, 5 psi gun air, 60-100 psi, 115 V.

Nordson, Sure Coat manual spray gun with control, 80-90 psi, 5 psi gun air, 60-100 psi, 115 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Nordson

Smith Machinery Co has 2 more listings in Booths, Paint and Powder.

Boring Mills, Horizontal, Table Type

2 Results
Image for 4" Summit #HTM4W/TNC124, S/N 51-LB-034S, 48" X 64" table, 50 Taper, 16-16000 RPM, Heidenhain TNC124 CNC Control

4" Summit #HTM4W/TNC124, S/N 51-LB-034S, 48" X 64" table, 50 Taper, 16-16000 RPM, Heidenhain TNC124 CNC Control

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Summit
Model: HTM4W/TNC124
TABLE SIZE --- 48" X 64". SPINDLE SIZE --- 4". SPINDLE TAPER --- 50. MOTOR --- 220V, 3PH. ...more

Brazing and Sintering Furnaces

1 Result
Image for 18" width x 67" H x 18" L J.L. Becker, continuous, mesh belt, 300-2200Degrees Fahrenheit , 13" conv, 480 V., #83784

Burn Off and Paint Stripping Furnaces

1 Result
Image for 33" width x 12" H x 93" L Spray-Con #OV-30, inferred oven, 32" x10' belt, 18 heaters, #81608

33" width x 12" H x 93" L Spray-Con #OV-30, inferred oven, 32" x10' belt, 18 heaters, #81608

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Spray-Con

C Frame Hydraulic Press Machines (Gap Frame)

9 Results
Image for 1 Ton, Denison #A, hydraulic press, 8" stroke, serial #1254

1 Ton, Denison #A, hydraulic press, 8" stroke, serial #1254

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Denison
Model: A
Image for 2 Ton, Denison #MC02R, Multipress, 6" stroke, 12" daylight, serial #2435, 1948

2 Ton, Denison #MC02R, Multipress, 6" stroke, 12" daylight, serial #2435, 1948

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Denison
Model: MC02R
Year: 1948
Image for 4 Ton, Denison #DF4C01C18A59S01, Multipress, 6" stroke, 3 HP, serial #6624--v7

4 Ton, Denison #DF4C01C18A59S01, Multipress, 6" stroke, 3 HP, serial #6624--v7

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Denison
Model: DF4C01C18A59S01
Image for 5 Ton, Denison C-frame hydraulic press, 19" throat, 20" daylight, 10 HP, 1770 RPM, s/n 8950, 1952

5 Ton, Denison C-frame hydraulic press, 19" throat, 20" daylight, 10 HP, 1770 RPM, s/n 8950, 1952

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Denison
Year: 1952
Image for 5 Ton, Heim #HPY5054, hydraulic, 1/16" - 1-1/2" keyway cut., 19" thr., 12" work height, 20" x 31" table, 45 SPM, s/n 1Y884, 2000

Smith Machinery Co has 4 more listings in C Frame Hydraulic Press Machines (Gap Frame).

Image for 24" width x 39" H" x 55" D Despatch #RS-1, 450 deg. F, 4-1/2" exhaust outlet, 11 KW heater

24" width x 39" H" x 55" D Despatch #RS-1, 450 deg. F, 4-1/2" exhaust outlet, 11 KW heater

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Despatch
Model: RS-1
Image for 27" width x 37" H x 21" D Blue M, heat oven, 550 deg. F, 1 phase, 230 V.

27" width x 37" H x 21" D Blue M, heat oven, 550 deg. F, 1 phase, 230 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Blue M
Image for 84" width x 64" H x 98" D Despatch #V-39HD, gas, 650 deg. F, s/n, 61739

84" width x 64" H x 98" D Despatch #V-39HD, gas, 650 deg. F, s/n, 61739

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Despatch
Model: V-39HD
Image for Vulcan #ET1010-T / ET1010-B, double convection ovens, 208 V., 60 Hz, 9 Amp., 24 KW

Vulcan #ET1010-T / ET1010-B, double convection ovens, 208 V., 60 Hz, 9 Amp., 24 KW

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Vulcan
Model: ET1010-T

Carbide, Friction and Cold Saws

16 Results
Image for 4" Eisele #VMS-350-PV, cold saw, 6-3/4" x 4" flat 90 Degrees , 13-3/4" blade diameter

4" Eisele #VMS-350-PV, cold saw, 6-3/4" x 4" flat 90 Degrees , 13-3/4" blade diameter

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Eisele
Model: VMS-350-PV
Image for 4" Pedrazzoli #350, super brown, metal cold saw

4" Pedrazzoli #350, super brown, metal cold saw

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Pedrazzoli
Model: 350
Image for 4" Uni-hydro #IMET-Perfect-300, manual cut off saw, S/N YJM105

4" Uni-hydro #IMET-Perfect-300, manual cut off saw, S/N YJM105

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Uni-Hydro
Model: IMET-PERFECT-300
Image for 4-3/4" Doringer #D-350, double miter circular cold saw, S/N 27446/27448, 2018

4-3/4" Doringer #D-350, double miter circular cold saw, S/N 27446/27448, 2018

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Doringer
Model: D-350
Year: 2018

Smith Machinery Co has 11 more listings in Carbide, Friction and Cold Saws.

Centrifugal Pumps and Boiler Feed Pumps

3 Results
Image for 30 GPM, Grundfos #CRT4, 3 HP motor

30 GPM, Grundfos #CRT4, 3 HP motor

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Grundfos
Model: CRT4
Image for 200 GPM @ 46' TDH, Armstrong #3X3X8-4380, vertical in-line pump, 5 HP, Bronze fitted, S/N 1018324033

200 GPM @ 46' TDH, Armstrong #3X3X8-4380, vertical in-line pump, 5 HP, Bronze fitted, S/N 1018324033

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Armstrong
Model: 3X3X8-4380
Image for 3400 GPM @ 160 TDH, Summit #SN03A, self-priming centrifugal pump, S/N 01208491

3400 GPM @ 160 TDH, Summit #SN03A, self-priming centrifugal pump, S/N 01208491

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Summit
Model: SN03A
Image for 12" x 12" Chip Wringer, 0.785" cu.ft. chip pan, 0.631 bushels

12" x 12" Chip Wringer, 0.785" cu.ft. chip pan, 0.631 bushels

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Chip Wringers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Chip Wringer
Image for 36" x 24" Mayfran chip wringer, 500 L/hr., stand, ser.689-0605-1

36" x 24" Mayfran chip wringer, 500 L/hr., stand, ser.689-0605-1

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Chip Wringers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Mayfran

Circular Saws

1 Result
Image for 3" Soco #MC-350-AC, twin head, circular cold saw, 14" diameter blade, 2 HP, 44-88 RPM, 59" left head, 12" diameter HSS blade

3" Soco #MC-350-AC, twin head, circular cold saw, 14" diameter blade, 2 HP, 44-88 RPM, 59" left head, 12" diameter HSS blade

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Circular Saws
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Soco
Model: MC-350-AC
Image for 1.77" Bema #G45CND, CNC, Bema CN2000, 9" max.bend radius, 133" max.length, #77197

1.77" Bema #G45CND, CNC, Bema CN2000, 9" max.bend radius, 133" max.length, #77197

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Bema
Model: G45CND
Image for Peddinghaus #BPL-1000/5D, 100 ton, 2" stroke, 21" throat, 39-3/8" beam, Fagor 8025 CNC Control

Peddinghaus #BPL-1000/5D, 100 ton, 2" stroke, 21" throat, 39-3/8" beam, Fagor 8025 CNC Control

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Peddinghaus
Model: BPL-1000/5D
Image for Peddinghaus #Ocean-Avenger-II, CNC beam drill line with flipper & 40' conveyor, 13.5 HP

Peddinghaus #Ocean-Avenger-II, CNC beam drill line with flipper & 40' conveyor, 13.5 HP

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Peddinghaus
Model: OCEAN-AVENGER-II

CNC Lasers

3 Results
Image for Amada #FO3015, Co2 laser, 4000 watt, 5' x10', 120" X, 61" Y, 7.5" Z, S/N 07510636, 2004

Amada #FO3015, Co2 laser, 4000 watt, 5' x10', 120" X, 61" Y, 7.5" Z, S/N 07510636, 2004

Smith Machinery Co, Ames, IA | Jim Smith |
Category: CNC Lasers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amada
Model: FO3015
Year: 2004
Image for Cincinnati #CL-707, CNC laser center, 3500 watt, S/N 54225, 2008, #84806

Cincinnati #CL-707, CNC laser center, 3500 watt, S/N 54225, 2008, #84806

Smith Machinery Co, Ames, IA | Jim Smith |
Category: CNC Lasers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Cincinnati
Model: CL-707
Year: 2008
Image for Han-Kwang #PL3015, CO2 Laser, 4000 watt, 5' x 10', dual shuttle, S/N PL-117, 2010

Han-Kwang #PL3015, CO2 Laser, 4000 watt, 5' x 10', dual shuttle, S/N PL-117, 2010

Smith Machinery Co, Ames, IA | Jim Smith |
Category: CNC Lasers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Han-Kwang
Model: PL3015
Year: 2010
CUTTING CAPACITY --- 4,000 WATTS. CUTTING TABLE SIZE --- 5' X 10', DUAL SHUTTLE. HOURS --- 37,785. VOLTAGE ...more

CNC Lathes and Turning Centers

21 Results
Image for Amera-Seiki #GR-2L, Fanuc O-T, 18"/11" swg, 8" chuck, 6 station turret, 9-14" dia. turning, 2001

Amera-Seiki #GR-2L, Fanuc O-T, 18"/11" swg, 8" chuck, 6 station turret, 9-14" dia. turning, 2001

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amera-Seiki
Model: GR-2L
Year: 2001
Image for Amera-Seiki #T-308, Fanuc Oi-TB, 12 station turret, 23" swing, 10" chuck, 2-1/2" bore, 2004

Amera-Seiki #T-308, Fanuc Oi-TB, 12 station turret, 23" swing, 10" chuck, 2-1/2" bore, 2004

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amera-Seiki
Model: T-308
Year: 2004

Amera-Seiki #TC310MC, lathe

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amera-Seiki
Model: TC310MC
Image for Daewoo Doosan #Proturn-CS-X4000, 4000" mm swing, 710mm max turn, 600mm turn length, 28-2000 RPM, S/N A251002, 1994

Daewoo Doosan #Proturn-CS-X4000, 4000" mm swing, 710mm max turn, 600mm turn length, 28-2000 RPM, S/N A251002, 1994

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Daewoo Doosan
Model: PROTURN-CS-X4000
Year: 1994
Image for Emco #EmcoTurn-465, CNC lathe, 2.5" bar, FMB barfeeder, #81797

Emco #EmcoTurn-465, CNC lathe, 2.5" bar, FMB barfeeder, #81797

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Emco
Model: EMCOTURN-465

Smith Machinery Co has 16 more listings in CNC Lathes and Turning Centers.

CNC Plasma Cutting Systems (Flame Cutters)

8 Results
Image for Amada turret laser, #84441

Amada turret laser, #84441

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amada
Image for Dynatorch #XLR8, plasma cutting, 5' x 10', Thermal Dynamic Ultra Cut, 2015

Dynatorch #XLR8, plasma cutting, 5' x 10', Thermal Dynamic Ultra Cut, 2015

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Dynatorch
Model: XLR8
Year: 2015
Image for Hypertherm #MAX40CS, Plasma Cutting System, 30/26/13 Amp, 208/240/480V, 7/16" mild steel capacity

Hypertherm #MAX40CS, Plasma Cutting System, 30/26/13 Amp, 208/240/480V, 7/16" mild steel capacity

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Hypertherm
Model: MAX-40CS
Image for Hypertherm #MAX100, heavy duty air plasma cutting system, 1-1/4" cutting capacity, 230 V., #84499

Hypertherm #MAX100, heavy duty air plasma cutting system, 1-1/4" cutting capacity, 230 V., #84499

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Hypertherm
Model: MAX100
Image for Solar #118-002, Plasma Cutting System, input 230 V., 3 Phase, 42 Amp, 60Hz, 926 KVA, output 100 V., 40 Amp, 40% duty cycle

Smith Machinery Co has 3 more listings in CNC Plasma Cutting Systems (Flame Cutters).

CNC Press Brakes

1 Result
Image for Amada #HDS130NT, hydraulic press brake, 15.3' overall, 106.3" between housing, S/N 13300228, 2005

Amada #HDS130NT, hydraulic press brake, 15.3' overall, 106.3" between housing, S/N 13300228, 2005

Smith Machinery Co, Ames, IA | Jim Smith |
Category: CNC Press Brakes
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Amada
Model: HDS130NT
Year: 2005
Image for 9" Haas #8RT, rotary table & controller, 40'/lbs, torque, 90:1 gear ratio, 9" tbl, #74205

9" Haas #8RT, rotary table & controller, 40'/lbs, torque, 90:1 gear ratio, 9" tbl, #74205

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Haas
Model: 8RT
Image for 12" Haas #HRT310, 6 T-Slots @ 60 Degrees , 3-1/4" spindle bore

12" Haas #HRT310, 6 T-Slots @ 60 Degrees , 3-1/4" spindle bore

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Haas
Model: HRT310
Inv #: 82792. (1) PREOWNED HAAS ROTARY TABLE, MODEL HRT310 . S/N 312576.
Image for Komo #VR508, CNC Router, 208/240 V., S/N I850096, 1996

Komo #VR508, CNC Router, 208/240 V., S/N I850096, 1996

Smith Machinery Co, Ames, IA | Jim Smith |
Category: CNC Routers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Komo
Model: VR-508
Year: 1996

CNC Turret Lathes

2 Results
Image for Diedesheim #V60-11, vertical turret lathe, 24" chk, 6 position turret, Dynapath 9000/Bendix Control, S/N 22122, 1989

Diedesheim #V60-11, vertical turret lathe, 24" chk, 6 position turret, Dynapath 9000/Bendix Control, S/N 22122, 1989

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Diedesheim
Model: V60-11
Year: 1989
Image for Logan #2555V, turret lathe

Logan #2555V, turret lathe

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Logan
Model: 2555V

CNC Turret Punch Press Machine

2 Results
Image for 20 Ton, Weidemann #Motorum-2048, turrent punch with load/unload, 50" x 80" sheet, 50" throat, 30 station turret, Fanuc 161 Control

20 Ton, Weidemann #Motorum-2048, turrent punch with load/unload, 50" x 80" sheet, 50" throat, 30 station turret, Fanuc 161 Control

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Weidemann
Model: MOTORUM-2048
Image for 25 Ton, Finn-Power #A5-25SB, Sinumerik 840, 100x50", 3 automatic index, 20 station, 7-1/2" str, 8274 hours, 2000

25 Ton, Finn-Power #A5-25SB, Sinumerik 840, 100x50", 3 automatic index, 20 station, 7-1/2" str, 8274 hours, 2000

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Finn-Power
Model: A5-25SB
Year: 2000

CNC Vertical Bed Mills

10 Results
Image for Chevalier #FM-33K Falcon, Dynapath Delta Autocon control, s/n #KC84A008, #83123

Chevalier #FM-33K Falcon, Dynapath Delta Autocon control, s/n #KC84A008, #83123

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Chevalier
Model: FM- 33K
Image for Fryer #MC-30, CNC Vertical Milling Machine, 32" X, 18" Y, 26" Z, 2400 RPM, 10 HP

Fryer #MC-30, CNC Vertical Milling Machine, 32" X, 18" Y, 26" Z, 2400 RPM, 10 HP

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Fryer
Model: MC-30
Image for Hurco #Hawk-30/SSM, 3-axis, 52" x 11" table, 35" X, 18" Y, 20" Z, Ultimax SSM control, ser.H30s-95015128A

Hurco #Hawk-30/SSM, 3-axis, 52" x 11" table, 35" X, 18" Y, 20" Z, Ultimax SSM control, ser.H30s-95015128A

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Hurco
Model: HAWK-30/SSM
Image for Lagun #FTV-2S, 10" x50" table, 2 HP, 5/8" T-Slot, 16" X, 18" Y, 16" Z, R-8, 50-4250 RPM, s/n 28783

Lagun #FTV-2S, 10" x50" table, 2 HP, 5/8" T-Slot, 16" X, 18" Y, 16" Z, R-8, 50-4250 RPM, s/n 28783

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Lagun
Model: FTV-2S
Image for Lagun #Lagunmatic-250, CNC mill, 10" x44" table, #40 taper, 490-4200 RPM, Lagunmatic 1000 Dinapth Delta CNC Control, coolant, S/N 36102

Lagun #Lagunmatic-250, CNC mill, 10" x44" table, #40 taper, 490-4200 RPM, Lagunmatic 1000 Dinapth Delta CNC Control, coolant, S/N 36102

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Lagun
Model: LAGUNMATIC-250

Smith Machinery Co has 5 more listings in CNC Vertical Bed Mills.

Image for 800 lb. Rowe #815, Coil Cradle, 15" width, 36" outside dimension, 1/2 HP, S/N 15248

800 lb. Rowe #815, Coil Cradle, 15" width, 36" outside dimension, 1/2 HP, S/N 15248

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Rowe
Model: 815
Image for 2000 lb. Littell #412-C20, Coil Craddle, 0.125" x 12", 12" width, 48" outside dimension, 28" x 80" base size, 3 HP

2000 lb. Littell #412-C20, Coil Craddle, 0.125" x 12", 12" width, 48" outside dimension, 28" x 80" base size, 3 HP

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Littell
Model: 412-C20
Image for 2000 lb. Rowe #2020J, Coil Cradle, 10" width, 40" outside dimension, 35-100 FPM, S/N 20243

2000 lb. Rowe #2020J, Coil Cradle, 10" width, 40" outside dimension, 35-100 FPM, S/N 20243

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Rowe
Model: 2020J
Image for 2500 lb. Cooper Weymouth #C2612, coil cradle, S/N 540

2500 lb. Cooper Weymouth #C2612, coil cradle, S/N 540

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Cooper Weymouth
Model: C2612
Image for 3000 lb. Rowe #A-15/3J, combination Cradle/straightener, 15" width, 3 HP, 0.025-0.080 thickness, S/N 23849

3000 lb. Rowe #A-15/3J, combination Cradle/straightener, 15" width, 3 HP, 0.025-0.080 thickness, S/N 23849

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Rowe
Model: A-15/3J

Smith Machinery Co has 4 more listings in Coil Cradles and Straighteners.

Image for 40" x 54" Piqua #Series-40, down-acting hydraulic vertical baler, #84431

40" x 54" Piqua #Series-40, down-acting hydraulic vertical baler, #84431

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Crushers
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Piqua
Model: SERIES-40

Cutoff Saws

2 Results
Image for 10" Phoenix #PA10, automatic saw, S/N: DPA100127, 1993

10" Phoenix #PA10, automatic saw, S/N: DPA100127, 1993

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Cutoff Saws
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Phoenix
Model: PA10
Year: 1993
Image for 10" Saturne #M-1, cold cut-off saw, 12' 6" table length, 24" travel, 60" shuttle travel, 5" jaw opening, hydraulic shuttle, ser.2767

10" Saturne #M-1, cold cut-off saw, 12' 6" table length, 24" travel, 60" shuttle travel, 5" jaw opening, hydraulic shuttle, ser.2767

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Cutoff Saws
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Saturne
Model: M-1
Image for Press Brake Die, 1-1/2" width x 3-3/4" height x 147" length, press brake acute punch, #84509

Press Brake Die, 1-1/2" width x 3-3/4" height x 147" length, press brake acute punch, #84509

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Model: PRESS BRAKE DIE
Image for Press Brake Die, 1-1/2" width x 4-1/4" H x 122" L, #84508

Press Brake Die, 1-1/2" width x 4-1/4" H x 122" L, #84508

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Model: PRESS BRAKE DIE
Image for Press Brake Die, 1-1/4" width x 2" height x 122" length, 7/8" v-opening, #84511

Press Brake Die, 1-1/4" width x 2" height x 122" length, 7/8" v-opening, #84511

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Model: PRESS BRAKE DIE
Image for Press Brake Die, 1-1/8" width x 3" H x 146" L, 1/4" v-opening, #84516

Press Brake Die, 1-1/8" width x 3" H x 146" L, 1/4" v-opening, #84516

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Model: PRESS BRAKE DIE
Image for Press Brake Die, 1-3/4" width x 2-1/4" H x 120" L, 5/8" v-opening, press brake acute die, #84512

Press Brake Die, 1-3/4" width x 2-1/4" H x 120" L, 5/8" v-opening, press brake acute die, #84512

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Model: PRESS BRAKE DIE

Smith Machinery Co has 8 more listings in Dies For Press Brakes.

Direct Fired Heaters

1 Result
Image for Reznor Electric gas heater

Reznor Electric gas heater

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Reznor

Double Pinch Plate Rolling Machines

4 Results
Image for 3' x 16" gauge Niagara, initial pinch roll, (3) 37" rolls, grooves machined for rolling rod 5/8", 1/2", 3/8"
Image for 6' x 3/16" Roundo AB #1P140/6, 5.51" diameter roll, 3 HP, S/N 2141, 1990

6' x 3/16" Roundo AB #1P140/6, 5.51" diameter roll, 3 HP, S/N 2141, 1990

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Roundo
Model: 1P140/6
Year: 1990
Image for 6' x 1/4" Webb #R3L, 3 roll powered plate bending roll, 7.5 HP, 6.5" diameter top roll, 1750/1455 RPM, S/N 451, 1946

6' x 1/4" Webb #R3L, 3 roll powered plate bending roll, 7.5 HP, 6.5" diameter top roll, 1750/1455 RPM, S/N 451, 1946

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Webb
Model: R3L
Year: 1946
Image for 8' x 10" gauge Webb #R3L, initial pinch plate bending roll, 7" roll diameter, S/N 233, 1948

8' x 10" gauge Webb #R3L, initial pinch plate bending roll, 7" roll diameter, S/N 233, 1948

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Webb
Model: R3L
Year: 1948
Image for Jungner #450CNC, 1400/2800 RPM, 18" long., 11" cross, 9" vert.travel, 2 HP, s/n #88-019-02

Jungner #450CNC, 1400/2800 RPM, 18" long., 11" cross, 9" vert.travel, 2 HP, s/n #88-019-02

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Drill Grinders
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Jungner
Model: 450CNC
Image for Sugino #ES6-4-2406U, Self Drill Head, Hydro-Speed Regulators

Sugino #ES6-4-2406U, Self Drill Head, Hydro-Speed Regulators

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Drill Heads
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Sugino
Model: ES6-4-2406U
Image for Sugino #ES6-4-2406U, self feeder drill head, Hydro-Speed regulator, 85 psi, 650 RPM, 2 HP, 4-poles

Sugino #ES6-4-2406U, self feeder drill head, Hydro-Speed regulator, 85 psi, 650 RPM, 2 HP, 4-poles

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Drill Heads
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Sugino
Model: ES6-4-2406U

Drill Heads, Quill and Way Type

1 Result
Image for Sugino #ES6-4-2406U, Drill Head, 5.91" ram stroke, 2 HP, Hydro-Speed regulators

Sugino #ES6-4-2406U, Drill Head, 5.91" ram stroke, 2 HP, Hydro-Speed regulators

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Sugino
Model: ES6-4-2406U

Dumpers and Drum Dumpers

1 Result

Dumping Scrap Hopper, with forklift pockets

Smith Machinery Co, Ames, IA | Jim Smith |
Seller: Smith Machinery Co
City: Ames, IA
Image for 1200 cfm Donaldson #DF-2DF4, 4 cartridges, 5 HP, 2450 RPM, 35" x 40 x 95" H, s/n IG-097356

1200 cfm Donaldson #DF-2DF4, 4 cartridges, 5 HP, 2450 RPM, 35" x 40 x 95" H, s/n IG-097356

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Dust Collectors
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Donaldson
Model: DF-2DF4
Image for 3000 cfm Torit, 36 filters, 270 sq.ft. filter area, 10 HP, 72" L x 60" W x 240" H, 230/460 V.

3000 cfm Torit, 36 filters, 270 sq.ft. filter area, 10 HP, 72" L x 60" W x 240" H, 230/460 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Dust Collectors
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Torit
Image for 6000 cfm Act #ACT-3-12, dust collector, 12 filters, 3048 squaring ft. filter area, 15 HP, 230/460 V., S/N 15035

6000 cfm Act #ACT-3-12, dust collector, 12 filters, 3048 squaring ft. filter area, 15 HP, 230/460 V., S/N 15035

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Dust Collectors
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Act
Model: ACT-3-12
Image for Daltec #IE9HD-CCW-TH-AAR.9HP72, dust collector, 5' x 5' overall, 4" system, 3500 RPM, 7.5 HP, S/N 92-3795, #84396

Daltec #IE9HD-CCW-TH-AAR.9HP72, dust collector, 5' x 5' overall, 4" system, 3500 RPM, 7.5 HP, S/N 92-3795, #84396

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Dust Collectors
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Daltec
Model: IE9HD-CCW-TH-AAR.9HP72
Image for Smog Hog #2VF56B34F5329DP, smog/dust collector, 60 Hz, 1.5 HP, 1 Phase, 3450 RPM, 115/208-230 V.

Smog Hog #2VF56B34F5329DP, smog/dust collector, 60 Hz, 1.5 HP, 1 Phase, 3450 RPM, 115/208-230 V.

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Dust Collectors
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Smog Hog
Model: 2VF56B34F5329DP

Smith Machinery Co has 1 more listing in Dust Collectors.

Engine Lathes

18 Results
Image for 13" x 30" Cincinnati, Tray Top Lathe, toolpost, coolant, taper attachment, 8" 3-Jaw chuck, 1200 RPM, removable chip pan, threading dial
Image for 13" x 40" Willis #Microcut-PR-1340, 7-1/2" SPCS, 1-3/8" thru hole, 104-2000 RPM

13" x 40" Willis #Microcut-PR-1340, 7-1/2" SPCS, 1-3/8" thru hole, 104-2000 RPM

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Engine Lathes
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Willis
Model: MICROCUT-PR-1340
Image for 14" x 27-1/2" Yam #700, precision, 8" chk, 1800 RPM, Steady Rest, 1-9/16" spdl.hole, 1983, #82648

14" x 27-1/2" Yam #700, precision, 8" chk, 1800 RPM, Steady Rest, 1-9/16" spdl.hole, 1983, #82648

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Engine Lathes
Seller: Smith Machinery Co
City: Ames, IA
Mfr: Yam
Model: 700
Year: 1983
Image for 14" x 40" South Bend, geared head, 14" swing, 1" spindle hole, taper attach., tailstock, ser.MA2429A1

14" x 40" South Bend, geared head, 14" swing, 1" spindle hole, taper attach., tailstock, ser.MA2429A1

Smith Machinery Co, Ames, IA | Jim Smith |
Category: Engine Lathes
Seller: Smith Machinery Co
City: Ames, IA
Mfr: South Bend