For Sale by Smith Machinery Co
Description
| Center Height | 7 inches |
| Swing Over Bed | 14 inches |
| Swing Over Cross Slide | 8.34 inches |
| Distance Between Centers | 40 inches |
| Spindle Nose | D1-4 |
| Spindle Bore Diameter | 1.5 inches |
| Type of Spindle Nose | MT. #5 |
| Taper of Center | MT. #3 |
| Spindle Speeds | 36-2,000 RPM |
| Cross Slide Travel | 8 inches |
| Compound Rest Travel | 3.5 inches |
| Max. Size Cutting Tool | 3/4" x 3/4" |
| Spindle Diameter | 1.4375 inches |
| Spindle Travel | 4 inches |
| Taper of Center | MT. #3 |
| Bed Length | 54 inches |
| Bed Width | 9 inches |
| Width of Gap | 8 inches |
| Weight | 1540 pounds |
Equipped With
Equipped With
* Taiwanese Inverter 3 HP Spindle Motor
* Precision Ground Gears and Spindle in Headstock
* Spindle Mounted with Precision Taper Roller Bearings
* Enclosed Gearbox and Feedscrew w/ Built in Safety Over-Load Friction Clutch
* 36-2,200 RPM Infinite Speed (Hi & Low 2 Speed Range)
* D1-4 Camlock Spindle Nose with 1-1/2" Spindle Bore
* “Toshiba” Vector-Type 5HP Frequency Inverter
* Accepts 1 or 3-phase 220V Power Supply
* New and Enhance Design PC Board
* 9” Bed Width with Hardened and Ground Bedway
EQUIPPED WITH:
* One 6” Three Jaw Chuck
* 4-Way Tool Post
* One 8” Four Jaw Chuck
* One 10” Face Plate
* One Steady Rest (0.78”-2.15”)
* Built-In Coolant System
* One Follow Rest (0.78”-1.97”)
* Full Length Splash Guard
* Halogen Work Light
* Foot Brake
* Tool Box w/ Tools
* Micrometer Stop
* Chuck Guard with Emergency Stop
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
1. “Aloris” Tool Post & 4 Holders (#2—BS)………………………………………. $ 1,100.00
2. “Aloris” Tool Post & 6 Holders (#2 set)…………………………………….…… $ 1,500.00
3. Micrometer Stop…………………………………………………………………. $ 280.00
4. Four Position Carriage Stop……………………………………………………… $ 500.00
5. 5C Collets Closer (Lever-Type)…………………………………………………. $ 1,600.00
6. Installation Fee for Collet Closer ……………………………… ……………Net $ 110.00
7. Taper Turning Attachment………………………………………………………. $ 1,250.00
8. Installation Fee for Taper Turning Attachment………………………………Net $ 220.00
9. “Newall” DP700 NMS 800, 2-Axis D.R.O. (8” x 40” Travel)………………… $ 3,250.00
10. “Newall” E70 Constant Surface Speed D.R.O.………………………………….. $ 5,550.00
11. Installation Fee for D.R.O.…………………………………………………... Net $ 390.00
12. Upgrade to 440V (3-phase) Inverter Drive…………………………………...Net $ 550.00
Ø Special Package Price Includes:
E-Lathe 1440V equipped with “Newall” NMS800 2-axis Digital Readout & Pre-Installation at ACER Warehouse.: $18,250.00
DELIVERY:IMMEDIATE, SUBJECT TO PRIOR SALE
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
14" x 40" Sharp #1440V, Toolroom Engine Lathe, 1-1/2" bore, 8.6" socs, 6" chuck, D1-4 camlock, 3 HP, 30-2200 RPM, digital read out, 2020
14" x 40" GMC #GML-1440VTT, precision engine lathe, 8.25" swing over cross slide, 1.5" bore, D1-4, 30-2000 RPM, 3 HP, 220 V., variable speed, taper attachment, new
14" x 40" Jet #1440-3PGH, lathe, 10" 3-jaw chuck, 3" bore, tailstock, 7.5 HP, 220/440 V.
14" x 40" Sharp #1440-F, engine lathe, 8.625" swing over cross slide, 1.5" bore, 1800 RPM, inch/metric threading, chuck, tailstock, digital read out
