Buy or Sell Your Circular Cold Saw Machine

Cuts with a 16" carbide tipped saw blade, 240V/480V 3 phase, 7-10 seconds per cycle.

One Used 3/16" National Single Stroke Solid Die Cold Header, Serial No 16197, 3/16" Cutoff Diameter, 1" Shank Length, 1 1/2" Cutoff Length, 300 Pieces per Minute, AC Motor and Controls, Weight 4000 Lbs., Located FOB PA Whse.

One Used 1/4" Nakashimada Model H20A DSSD Cold Header, Serial No 800706, New 1980,.237 Maximum Cutoff Diameter (6mm), 2.756 Maximum Cutoff Length (70mm), 2" Maximum Shank Length (50mm), 200 Pieces Per Minute, PKO 2nd Punch, Electrical Equipment and Controls:, AC Motor and Controls, Weight- 7500 Lbs., Overall ...more

5/16″ Maximum Cutoff Diameter, 4-1/2″ Maximum Cutoff Length, 3-1/4″ Maximum Kickout Length, 125 PPM, Electrics: 7-1/2 HP, AC Motor & Controls, Dual plane wire straightener, Comes with: Pallet of spare tooling.

SHALCO GAS FIRED SHELL CORE MACHINE, MODEL U180GL, S/N 3469GR, RIGHT HAND W/ GAS SYSTEM AND CONTROLS, GUN DRILLED HEATER PLATES.

Cutoff Diameter 1/8" Cutoff Length 1-1/4" Shank Length 3/4" Pieces Per Minute 450 Weight 3,500 Lbs., Bushing Cutoff, Split Punch Holders, ***Machine is currently set up to run as a single die single blow header***.

SACMA MODEL# SP660 AL, 5 DIE COLD FORMER, YEAR 2008, HEADING TONS. 500, BLANK LENGTH. 240mm, DIE KICK. 200mm ON THE LENGTH, CUTOFF DIA. 31mm, UNIVERSAL TRANSFER, 80 PPM, 150 hp MOTOR.

SERIAL. 112010001, MODEL. Ct350A NC, YEAR NEW. 2012, BLADE SPEED. 3600 RPM, BLADE DIAMETER. 14", MXIMUM VISE OPENING. 8", CAPACITY ROUNDS. 4-1/2", CAPACITY ROUNDS @ 45 DEGREE. 4-1/2" LEFT OR RIGHT, CAPACITY SQUARE. 4", CAPACITY SQUARE @ 45 DEGRES. 4", CAPACITY RECTANGLES. 3-1/2 X 7-3/4", AUTOMATIC FEED. 0" TO 20" ...more

Tiger 350 AX Miter Automatic Cold Saw, STOCK# 14415J, Model: Tiger 350AX, Serial #: 006039 TTR, Maximum Blade Size: 13-3/4, Capacity @ 90 Round: 4-1/2, Capacity @ 90 Square: 3-3/4, Vise Opening: 7-1/2, Blade Speeds: 15/30/45/90 RPM, Maximum Length of Feed: 24, Motor HP: 3/2.4HP, Electrical: 460V/3PH, Air Vise on Bar ...more

Pre Owned Versakut Model WK-2 Cold Saw, Serial Number: GH 752 752, Saw Blade Diameter 26”, Capacity, Rounds 3¾, Squares 3 ¼, Rectangles 2 ½ X 6”, Cutting Capacity at 90 Degrees 8 ½” H X 25” L, Cutting Capacity at 45 Degrees 8 ½” H X 17” L, Blade ...more

Maximum Cutoff Diameter 5mm Shank Length 40mm Cutoff Length 60mm Pieces per Minute 470 Electrics AC Motor and Controls Weight 14,000, IAC, Bushing Cutoff, PKO 1ST AND 2ND, Relieving Knockout, Supported Pin Knockout, Motorized Feed and Kickout Adjustments, Quick Die Change, Mechanical Wiper, ACVD, LINEAR FEED, Brankamp ...more

Trennjaeger Cold Saw with Promacut Controls for Heavy Structural Steel, *This saw is used, but it is in good working condition guaranteed. It was up and in operation just prior to our removal very recently. Comes with two blades- one unused, and the other on the saw looks and feels unused (very sharp). Machine is not ...more

Cutoff Diameter 1/4" Shank Length 2 3/8" Pieces Per Minute 280 Electrics AC Motor and Controls Weight 7000 Lbs.

Cutoff Diameter Alloy Steel 5/16" Shank Length 2 1/2" Cutoff Length 3" Pieces per Minute 150 Electrics AC Motor and Controls Weight 25,000 Lbs., Bushing Cutoff, PKO, Brankamp Prokos PK500, transfer fixture, *** Completely Re Built 2003***, ****Excellent Condition as Taken from Service ****.

Maximum Cutoff Diameter 3/8" Shank Length 4" Maximum Cutoff Length 5 1/2" Pieces per Minute 115 Electrics 20 HP 220/440 Volts AC Motor and Controls Weight 26,000 Lbs., Timed PKO.

NATIONAL 56 S-1 2 DIE 3 BLOW COLD HEADER, 1990, SN N41386, Cutoff Diameter 1/2" MILD, Die Kickout 2 1/2", Cutoff Length 3", Pieces per Minute 150, Weight 27,000 KG, O.A. Dimensions 14'7" x 5'5"x 7'4"H, Bushing Cutoff, IAC, PKO, RKO.

CAPACITIES:, STRAIGHT CUT (ROUND) --------------------------- 4 in, (SQUARE) -------------------------- 3.5 in, (RECTANGLE) ----------------------- 4.75 in X 3.15, 45 DEGREE RIGHT (ROUND) ------------------------ 3.15 in, (SQUARE) -------------------------- 2.75 in, (RECTANGLE) ----------------------- 3.35 in X 3.15 ...more

Cutting Capacity: Rectangle 8 1/2" High x 24" Long Sawblade Size 22"- 26" Non Ferrous 146 FPM Mitering 40 Degrees Rotary Table Size 27 1/2" Dimensions ( L x W x H ) 120" x 38" x 89" WEIGHT 4,000 Lbs. Speeds (Pulley Change) Low Speeds Only 16-20-25 V=m/min, Low Speeds Only! Second Speed Change Not Avail. s (1) ...more

, FORGING STATION: 5 STATIONS (INCL. CUTOFF), MAXIMUM CUTOFF DIAMETER: 23mm, MINIMUM CUTOFF LENGTH: 20mm, MAXIMUM CUTOFF LENGTH: 175mm, MAXIMUM KICKOUT LENGTH: 130mm, PRODUCTION (PER MINUTE): 120ppm, PKO: 30mm, FORGING LOAD: 220tons, DIE DIAMETER: 120mm, PUNCH DIAMETER: 100mm, QUILL DIAMETER: 75mm, DIE CENTER ...more

Cutoff Diameter 1/8" Maximum Shank Length 3/4" Maximum Cutoff Length 1 1/4" Pieces Per Minute 450 Electrics AC Motor and Controls Weight 3200 Lbs., Bushing Cutoff, Wire Straightener, Split Punch Blocks.

WATERBURY HI PRO DSSD COLD HEADER, MAXIMUM DIAMETER WIRE 3/16", MAXIMUM SHANK LENGTH 1", MAXIMUM CUTOFF LENGTH 1-1/2", MAXIMUM PRODUCTION 270 PPM, APPROX. FLOOR SPACE 32" X 60", APPROX. WEIGHT 3,750 LBS.

Cutoff Diameter (4mm).156 Cutoff Length (40mm) 1 9/16" Kickout Length (25mm) 1" Pieces Per Minute 440 Electrics AC Motor and Controls Weight 7000 Lbs., PKO, Bushing Cutoff, Wire Straightener, Variable Speed Drive, PD Sensor and Set up Jig.

Cutoff Diameter 8mm 1st Die KO 115mm 2nd Die KO 60mm Pieces Per Minute 50-120 Electrics 15 HP Motor and Controls Weight 22000 Lbs., PKO, DC Vari Drive.

One Used 3/4" J.G. Kayser Model MZH DSSD Cold Header, 20 mm (.787") Maximum Cutoff Diameter, 180 mm (7.087") Maximum Kickout Length, 42 mm (1.635") Maximum Upset Diameter, 40 PPM Maximum Output, many many spare parts and tooling, 12' wide x 16' long., Motor base is 10' wide x 5' long, Weight: 30,000 kg ...more

Cutoff Diameter (600N/mm2) 31mm Die Kickout 240mm Cutoff Length 300mm Punch Knockout 64mm Pieces per Minute 80 Forge Pressure 5000 Kn Electricals 150 Kw AC Motor and Controls Weight 110,000 Kg, Bushing Cutoff, TPKO-all 5 Punches, Straight Across Transfer with IFO Cam and Hydraulic Lift, Adjustments from Operator ...more

Cosmec CM100, 12" Dip Chain Gang Saw, Parts Machine Only.

Cuts with a 16" carbide tipped saw blade, 240V/480V 3 phase, 7-10 seconds per cycle.

Cutoff Diameter 1/8" Shank Length 3/4" Cutoff Length 1-1/4" Pieces Per Minute 250 Electrics 2.2 KW 500V 50 HZ AC Motor & Controls Weight 3,000# Dimensions 2-1/2' X 5'.

Maximum Cutoff Diameter 1/4" Shank Length 1 3/8" Maximum Cutoff Length 2 3/8" Pieces per Minute 265 Electrics AC Motor and Controls Dimensions 8 x 4 1/2 Weight 9000 Lbs., Bushing Cutoff, PKO, Die relief.

Cutoff Diameter 8mm Maximum Shank Length 60mm Maximum Cutoff Length 75mm 1st Die KO 85mm Max Length Fully Tubular Aluminum Rivet 25mm Pieces Per Minute 250 Electrics AC Motor and Controls Weight 10,000 Kg.

Maximum Cutoff Diameter 2.5mm Maximum Cutoff Length 18mm Maximum Shank Length 12mm PKO Stroke 1st Punch 10mm PKO Stroke 2nd Punch 5mm Pieces per Minute 200/250 Weight 1300 Kgs.

Cutoff Diameter 3/16" Shank Length 1" Cutoff Length 1 1/2" Pieces Per Minute 225 Electrics AC Motor 3HP 220/440 Volts, Reeves Vari Drive Weight 3750 Lbs.

Cutoff Diameter 6mm Die Kickout (1st) 52 Die Kickout (2nd) 30 Cutoff Length 40mm Pieces per Minute 50-170 Motor and AC Controls AC Motor and Controls Weight 11,000 Lbs., Wire Straightener.

Maximum Cutoff Diameter 1/4" Maximum Cutoff Length 2 3/8" Maximum Shank Length 1 3/8" Pieces per Minute 150 Electrics 10 HP AC Motor and Controls Weight 9000 Lbs. O.A. Dimensions 4' x 7', Bushing Cutoff, Solid Punch Holder.

Cutoff Diameter 8.5mm Kickout Length 55mm Cutoff Length 55mm Pieces per Minute 200 PKO Stroke 18mm 2nd, 12mm 3rd Weight 12000 Lbs., Bushing Cutoff, PKO, Wiper, RKO, PD Sensor, Trim Capable, Capable Fingerless Transfer.

Maximum Cutoff Diameter 3/8" Maximum Cutoff Length 9 1/2" Maximum Shank Length 8 1/4" Pieces Per Minute 80 Electrics AC Motor and Controls Weight 22,000 Lbs., 10 Roll Plane Pre-Straightener, Automatic Lubrication.

Maximum Cutoff Diameter13mm Maximum Cutoff Length210mm KO Stoke180mm Maximum Production35 PPM ElectricsAC Motor & Controls Approx. Weight28,700 lbs Approx. Floor Size9"L x 13" W x 5" H, Check out our full inventory www.fhmachinery.com.

7” Capacity Cold Saw with Mitsubishi PLC Controller, Job Monitoring (Cycle Time, Job Duration, Part Count and AMP Load Setting), Material Library with US Steel Grades, Bar Feeder with Roller Bed & Material Grip Feed Carriage, Mist Exhaust System and Chip Conveyor., Capacity: 90°, Round Min - Max: ...more

Kalamazoo Machine Tool 14″ Manual Cold Saw, C 315/350, Inventory # 7848, Model: C 315/350, Made in Italy, For tubes, pipes, light structurals. Hinge type machines are ly not considered prouduction machines, but may be used in production under carefully considered applications, Max. Blade Size: 14″ (Ships ...more

One Used 5/16" Waterbury Farrel Model #11 Single Stroke Open Die Hand Feed Re-Header, 5/16" Maximum Wire Diameter, 5 1/2" Open Die Cavity, Note this machine does not have a feed box. It was designed to hand feed special long parts and double end parts with upgraded electrics and motor/clutch drive to accommodate hand ...more

LPC 110/400 TRENNJAEGER HYDRAULIC LONGITUDINAL, MITRE CIRCULAR COLD SAW, Serial No H 1752, Model LPC 110/400, LPC 110/400 TRENNJAEGER HYDRAULIC LONGITUDINAL, MITRE CIRCULAR COLD SAW, Serial No H 1752, Model LPC 110/400, MITRE Angle Cutting, Horizontal & Vertical Clamping, CATALOG :, Tube Stock Capacity @ 14" Saw ...more

Maximum Wire Diameter 1/8" Maximum Shank Length 5/8" Maximum Cutoff Length 1 1/4" Pieces Per Minute 100 Electrics AC Motor and Controls Weight 1800 Lbs.

3/8" ASAHI OKUMA MDL# AOT 10B 2 DIE 2 BLOW COLD HEADER, MAXIMUM CUTOFF DIAMETER (100,000 PSI) (.393") - 10MM, MAXIMUM KICKOUT LENGTH ( 3") - 76.2MM, MINIMUM KICKOUT LENGTH (.590") - 15MM, MAXIMUM CUTOTFF LENGTH ( 3.149") - 80MM, PIECES PER MINUTE - 200, ELECTRICS - AC MOTOR AND CONTROLS 200 VOLTS 3 PHASE, WEIGHT - ...more

9/16" NATIONAL #89 TWO-DIE THREE PUNCH COLD HEADER, CUT-OFF DIAM. 14 MM., MAX. SHAFT LENGTH UNDER HEAD. 125 MM, MAX. LENGTH CUT-OFF 150 MM, MAX. P.P.M. 100, MOTOR HP 50, PUNCH KICK OUT IN SECOND AND THIRD PUNCH, PUNCH KICK-OUT, CLOSED BUSHING CUT-OFF, RELIEVING KICK OUT, TRIMMING IN LAST STATION.

TY-SA-MAN MACHINE CO. _UNKNOWN_, 60" BLADE CAPACITY, 50 H.P. MAIN MOTOR, VERTICAL HEAD TRAVEL, 66" CROSS RAIL TRAVEL, 22" UNDER BLADE WITH HEAD UP, CONTROLS WERE UPDATED, FOR SHIPPING CAN BRING UNIT DOWN TO 10' 4", 60" DIAMOND BLADE INCLUDED, APPROXIMATELY 22" CUTTING CAPACITY, Tysaman saws are now owned by ...more

NUMBER OF DIES - 6, CUTOFF DIAMETER - 33MM, LENGTH UNDER HEAD - 50-250MM, CUTOFF LENGTH 20-300MM, CUTOFF KNIFE LENGTH - 105MM DIA. X 34MM, CUTOFF QUILL LENGTH - 100MM DIA. X 150MM, PUNCH DIA LENGHT - 110MM DIA X 300MM, DIE DIA LENGTH - 150MM DIA X 350MM, CENTER DISTANCE - 168MM, P.K.O STROKE - 50 (62) MM, K.O. STROKE ...more