Fabricante: Wdm
Modelo: 403-10-8
Longitud': 8.00
Capacidad en pulgadas o calibres: .41000
Núm. de inventario 86843
En venta por Smith Machinery Co

Distribuidor de Surplus Record desde 2001
Ubicación: Ames, IA
Contacto Jim Smith
Número de teléfono: 515...> Mostrar número de teléfono 515-233-6330
¡Avísele al vendedor que encontró su anuncio en Surplus Record!
Descripción
Specifications
Equipped With
Equipped With
Equipped With
Equipped With
SPECIFICATIONS:
NOMINAL ROLL DIAMETER -------------------- 10"
RATED ROLLING CAP. (MILD STEEL) ---------- 0.41” mild steel plate to 40” diameter x 8' wide
MOTOR ------------------------------------ 10 HP
VOLTAGE ---------------------------------- 230/460/3PH TEFC
APPROXIMATE WEIGHT ----------------------- 14,200 LBS
FEATURES:
• 1045 carbon rolls
• Hydraulic driven roll which provides instant start, stop, and reverse
• NEMA 12 control cabinet with fused control transformer
• Electrics meet NFPA 79 specifications
• 230/460-volt 3 phase 50/60 hertz electrics (specify voltage when ordering)
• Electronic overload protection
• Two roll drive
• SKF spherical roller bearings on all main bearings
• LSHT type hydraulic drive motor with high volumetric and overall efficiency
• Infinitely variable speed from 0-22 FPM
• Safety cable around perimeter of machine
• Beta 4 roving pendant control. Push button control of main functions and 3 digital readouts to show the position of the 3 lower rolls.
• Rolls driven through planetary or spur gear type speed reducers with brake(s)
• Machine sets directly on level floor
• Ability to roll symmetrical steel sections without additional attachments
• Hydraulic operated drop end support
• Cone Attachment
• Hardened and Polished Rolls
• Pinch Roll Trim
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
• Cone Attachment - $2,150
• Heavy Duty Cone Attachment - $4,000
• Hardened Only Rolls - $10,400
• Hardened and Polished Rolls - $18,950
• Pinch Roll Trim - $3,300
• Circular Grooves 3/8, 1/2, 5/8 - $1,000
• Starting Groove - $450
• Side Support Each - $9,050
• Overhead Support 12' Max - $10,000
• Pre 4.2 Control - $12,650
• Auto 4.2 Control - $29,100
DELIVERY:
4-6 Weeks
NOMINAL ROLL DIAMETER -------------------- 10"
RATED ROLLING CAP. (MILD STEEL) ---------- 0.41” mild steel plate to 40” diameter x 8' wide
MOTOR ------------------------------------ 10 HP
VOLTAGE ---------------------------------- 230/460/3PH TEFC
APPROXIMATE WEIGHT ----------------------- 14,200 LBS
FEATURES:
• 1045 carbon rolls
• Hydraulic driven roll which provides instant start, stop, and reverse
• NEMA 12 control cabinet with fused control transformer
• Electrics meet NFPA 79 specifications
• 230/460-volt 3 phase 50/60 hertz electrics (specify voltage when ordering)
• Electronic overload protection
• Two roll drive
• SKF spherical roller bearings on all main bearings
• LSHT type hydraulic drive motor with high volumetric and overall efficiency
• Infinitely variable speed from 0-22 FPM
• Safety cable around perimeter of machine
• Beta 4 roving pendant control. Push button control of main functions and 3 digital readouts to show the position of the 3 lower rolls.
• Rolls driven through planetary or spur gear type speed reducers with brake(s)
• Machine sets directly on level floor
• Ability to roll symmetrical steel sections without additional attachments
• Hydraulic operated drop end support
• Cone Attachment
• Hardened and Polished Rolls
• Pinch Roll Trim
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
• Cone Attachment - $2,150
• Heavy Duty Cone Attachment - $4,000
• Hardened Only Rolls - $10,400
• Hardened and Polished Rolls - $18,950
• Pinch Roll Trim - $3,300
• Circular Grooves 3/8, 1/2, 5/8 - $1,000
• Starting Groove - $450
• Side Support Each - $9,050
• Overhead Support 12' Max - $10,000
• Pre 4.2 Control - $12,650
• Auto 4.2 Control - $29,100
DELIVERY:
4-6 Weeks
Get Your Price from Smith Machinery Co!
Los compradores que vieron este anuncio también vieron:
¡RECIÉN AGREGADO!
Dobladora de placa Bertsch de 8' x 1/2", rodillo de pinza inicial mecánico, 3 rodillos, extremo de caída manual
Categoría: Initial and Double Pinch Plate Bending...
Vendedor: Equilibrium Machinery
Ubicación: Waukesha, WI
Fabricante: Bertsch
Roladoras mecánicas de placa Bertsch 8′ x 1/2″, Pinzamiento inicial de 3 rodillos, Capacidad 8′ x 1/2″, Extremo de caída manual.
8' x 5/16" Lemas #TR-200/8, rodillo doblador hidráulico de 3 rodillos de pinza inicial, diámetro del rodillo 7.87", 16 FPM, accionamiento de 5 HP, doblado de cono, 480 V., nuevo
Categoría: Initial and Double Pinch Plate Bending...
Vendedor: Smith Machinery Co
Ubicación: Ames, IA
Fabricante: Lemas
Modelo: TR-200/8
Especificaciones, Equipado con, Equipado con ESPECIFICACIONES:, * Capacidades en acero dulce con resistencia a la cedencia de 36,000 PSI: 8' x 5/16" * Diámetro de todos los rodillos: 7.87" * Velocidad de laminado - aproximadamente 16' por minuto * Potencia total conectada del motor @ 480 volts – motor de accionamiento ...más
Heller #MSMS-2530X7 de 8' x 1/4", rodillo de presión inicial, ajuste de rodillo motorizado, 2002
Categoría: Initial and Double Pinch Plate Bending...
Vendedor: Mid Atlantic Machinery
Ubicación: Harrisburg, PA
Fabricante: Heller
Modelo: MSMS-2530X7
Año: 2002
Especificaciones, Capacidad: 8 ft. x 1/4'' -7 mmEquipado con, Ajuste motorizado de rodillo traseroAjuste manual de rodillo delantero.
8' x 1/4" Beloit Hendley & Whittemore #8-G, rodillo tipo inicial para volteo de placas, accesorio para volteo angular, extremo de caída manual, 10 HP
Categoría: Initial and Double Pinch Plate Bending...
Vendedor: Mohawk Machinery Inc
Ubicación: Cincinnati, OH
Fabricante: Hendley & Whittemore
Modelo: 8-G
8' X 1/4 BELOIT HENDLEY & WHITTEMORE 8-G RODILLO CURVADOR DE PLACA TIPO INICIAL CON ACCESORIO PARA CURVAR ÁNGULOS - Extremo abatible manual - Ajuste motorizado del rodillo trasero - Rodillos para ángulos y tubos - Capacidad para patas hacia adentro y hacia afuera de 2-1/2 x 2-1/2 x 1/4 - Motor de 10 HP, 8 x 1/4 BELOIT ...más
8' x 1" Bertsch, Rodillo doblador de placas de presión inicial de 3 rodillos
Categoría: Initial and Double Pinch Plate Bending...
Vendedor: G-2000
Ubicación: Toledo, OH
Fabricante: Bertsch
SERIAL..................: M-10197, MODELO...................: #18, CAPACIDAD................: 1", LONGITUD DE LOS RODILLOS..........: 120", DIÁMETRO DE LOS RODILLOS.......: 17", APERTURA MÁXIMA.............: 5.25", EXTREMO DE DESCARGA NEUMÁTICA............: SÍ, ACCIONAMIENTO DEL MOTOR PRINCIPAL........: 40, MOTORES DE ...más










