Montgomery Peterson Inc
Enfield, CT 06083-1087
Surplus Record Dealer Since 2025
Contact
Neal Peterson
7 listings in 3 categories
Horizontal Band Saws
1 Result
10" x 10" Marvel-Phoenix #PA10, Horizontal Automatic Bandsaw, 480-3-60 Power
Category: Horizontal Band Saws
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Marvel
Model: PA10
Used Marvel Phoenix PA10 Horizontal Automatic Bandsaw, Wired 480-3-60 Power, 10"x10" Capacity Hydraulic Dual Down Feed, Combination Carbide & Power Guides, Power Chip Brush 3" Remnant Length, Hydraulic Vises Head Feed & Bar Feed, Mechanical Band Tension, This machine was used lightly the last 5 years & is ...more
Atra Ace #WA-3500, 2" x 3" hole capacity, 350/650 RPM, Rebuilt
Category: Portable Drills
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Ace
Model: WA-3500
Automatic Feed Drill - 350/650 rpm 220-240V, 2" x 3" hole capacity. "One-Touch" Shank, Completely REBUILT by Nitto-Kohki, All worn parts were replaced with new parts.
Vertical Band Saws
5 Results
10" x 10" Marvel #V10A, Vertical Bandsaw, 208 V., 3 phase, Rebuilt
Category: Vertical Band Saws
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Marvel
Model: V10A
This saw will be completely rebuilt., We brought it in house Stripped the sheet metal and sent everything out for cleaning., We will go through it and replace worn and bad parts as needed. All bearings and operator switches, will be replaced., This saw will take 8-12 weeks from order to complete., It is in the ...more
18" x 20" Marvel #81A/9, metal-cutting, vertical bandsaw, rebuilt
Category: Vertical Band Saws
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Marvel
Model: 81A/9
SERIAL. E-375488-I, MODEL. 81A/9, FEED.RIGHT TO LEFT, CAPACITY NOMINAL 90°. 18" X 20" CAPACITY AT 45° (LEFT). 18" X 11.5", CAPACITY AT 45° (RIGHT). 18" X 13.5" BLADE SPEEDS. 60 TO 200 FPM (VARIABLE) POWER FEED TO HEAD. 0# TO 300# DUAL HYDRAULIC VISES. YES HEAD TILTS 45 DEGREES. RIGHT AND LEFT HYDRAULIC ...more
18" x 22" Amada / Amada/marvel #VT4555, vertical bandsaw, new
Category: Vertical Band Saws
Seller: Montgomery Peterson Inc
Location: Oshkosh, WI
Mfr: Amada/marvel
Model: VT4555
Year: 2025
This machine is 6-8 weeks out. You must state voltage on your po., FOB: Oshkosh, WI, Twenty complimentary blades and one 5-gallon complimentary pail of blade lubricant (Eberle EP1000)..
18" x 22" Marvel #8-Mark-I, vertical bandsaw
Category: Vertical Band Saws
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Marvel
Model: 8-MARK-I
This saw was taken as a trade-in against a purchase of a New VT4555 Amada saw. It was used in operation until the new saw arrived., This saw is being sold in "as-is" condition., 18" x 22" capacity, Tilts 45° left and right and has one vise set.
18" x 22" Marvel #8-Mark-II, vertical bandsaw, rebuilt (2 available)
Category: Vertical Band Saws
Seller: Montgomery Peterson Inc
Location: WINDSOR LOCKS, CT
Mfr: Marvel
Model: 8-MARK-II
This machine has been stripped of all sheet metal panels and dipped to strip all dirt and paint. The machine was pressure washed to remove all residual dirt and grease. We removed the column and the carriage to allow replacement of all carriage bearings, guides & pressure blocks. We have checked both band wheels ...more
