AI-ranked results for 7 stand - closest matches first
14 Stand, Dreistern #P1216-PE101, cantilivered rollformer, 2" shafts, 8-1/2" R/S, #61607
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P1216-PE101
MODEL. P1216-PE101, NUMBER OF STANDS. 14, DIAMETER SHAFTS. 2", ROLL SPACE. 8-1/2", DISTANCE BETWEEN SPINDLE CENTERS. 10", TOP OF BASE TO LOWER SPINDLE CENTER. 10", VERTICAL ADJUSTMENT. 4-1/2" TO 6-1/2", VARIABLE SPEED DRIVE. YES, SHAFT SUPPORTS. YES, CONTROL. E-TRAC WFC-HT AC INVERTER, MOTOR. 15 HP.
10 Stand, Tishken #10MW-2, rollformer press, 2" arbor, 8" roll space, 12" horizontal centers, 5.5"-8.5" vertical adj., coolant, 30 HP
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Tishken
Model: 10MW-2
WEIGHT10,300, SERIAL. 18830-984, YEAR NEW. 1984, MODEL. 10-MW-2, NUMBER OF STANDS. 10, ARBOR DIAMETER. 2", ROLL SPACE. 8", HORIZONTAL SPACING. 12", VERTICAL ADJUSTMENT. 5-1/2" TO 8-1/2", BOTTOM SPINDLE TO BASE. 5", COOLANT. YES, VFD DRIVE. YES, MOTOR. 30 HP.
64 Stand, RLM rollformer, 3" spindle diameter, 20"-24" spindle, gearboxes & outboards stands
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Spindle Diameter: 3”, Roll Space: 20”-24", Vertical Adjustment: 6.5” - 12”, Table to Center of Bottom Spindle: 9 3/4”, (64) Total Stands including., - (51) Stands, top and bottom spindles driven., - (10) Stands, bottom spindle driven, compatible for gear linkage to drive top spindle., - ...more
5 Stand, Lockformer Pittsburgh 20 Ga. Rollformer, 25 FPM
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Lockformer Snap Lock 20 Ga. Rollformer #6807 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
20 Stand, Yoder #M3, rafted roll forming heads, 3 spindle diameter, 18" roll space, equal geared
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M3
TOTAL NUMBER OF STANDS. 20, NUMBER OF RAFTS. 5, STANDS PER RAFT. 4, SPINDLE DIAMETER. 3", ROLL SPACE. 18", HORIZONTAL DISTANCE BETWEEN SPINDLE. 24", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 10", MIN VERTICAL CENTER DISTANCE BTWN SPINDLES. 5-1/2", MAX VERTICAL CENTER DISTANCE BTWN SPINDLES. 9", EQUAL GEARED. YES.
Get email updates for newly added Rollformers
Rollformers (also known as roll forming machines) are used to shape sheet metal or strips into continuous profiles by passing them through a series of rollers. Commonly used in industries like construction, automotive, and manufacturing, they are ideal for producing parts like roofing panels, beams, and tubing. Rollformers are essential for efficiently creating uniform, high-quality metal profiles in large-scale production.
9 Stand, Fisher #MPF-1 Auto, dura fence panel rollforming line, uncoiler, cut-off shear
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: MPF-1
Make: Evalutioner, Co (Ukraine), Product: Fence Metal Panels, Number of Stands: 9, Material Thickness: 0.4mm 0.55mm, Motor: 1.5Kw, Speed: 10 meters per minute, Uncoiler, Coil Weight: 1.5 ton, Material Width: 350mm, Manual Mandrel, Coil Hold Down Arm, Feed Up Motor, Unit Weight: 282kg, 9 - Stand Roll Former, Chain ...more
18 Stand, CMC, rollformer, 32" roll space, 2" dia.shafts, 18" horiz. centers, 40 HP,good
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Cmc
MODEL #: N/A, SERIAL #: N/A, 18 STANDS, 32" OF ROLL SPACE, 2" DIAMETER SHAFTS, 18" HORIZONTAL CENTERS, 3.5" VERTICAL ADJUSTMENT, 6" - 9.5" VERTICAL CENTERS, 7.25" BASE TO CENTER OF LOWER SPINDLES, (2) 9 STAND BASES, MOTOR: 40 HP 230/460/3/60 1185 RPM, 30' LR x 68" FB x 52" TALL, GOOD CONDITION.
10 Stand, Dahlstrom, cantilever rollformer, 1.25" spindle diameter, 3.5" rollspace, 6.5" horizontal centers, 3.5"-4.5" adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Dahlstrom
UTUBE NUMBER: 3567, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 350-10, SERIAL NUMBER: 315, Number of Stands: 10, Line Direction: Right to Left, Spindle Diameter: 1-1/4″, Roll Space: 3-1/2″, Horizontal Center: 6-1/2″, Adjustment: 3-1/2″ – 4-1/2″, Base Top to Center Lower Spindles: ...more
10 Stand, Rollform Design, rollformer, 1" shaft diameter, 4.75" roll space, 1/4" keyway
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Rollform Design
UTUBE NUMBER: 1699, MANUFACTURER: ROLLFORM DESIGN, Number of Stands: 10, Line Direction: Right to Left, Roll Shaft Diameter: 1", Roll Space: 4-3/4", Horizontal Centers: 4", Vertical Centers: 2-1/2", Base to Center Lower Shaft: 5-3/4", Shaft Keyway Size: 1/4", Stock Guide, 3 HP Motor ...more
13 Stand, Ardcor #S-F, rollformer, 5-1/2" roll space, 1-1/2" spindle diameter, 15 HP, 1962, #65705
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: S-F
Year: 1962
SERIAL. 520, MODEL. S-F, VERTICAL CENTER. 4.187", VERTICAL ADJ. 3", HORIZONTAL CENTER. 5.5", ROLL SPACE. 10", SPINDLE DIAMETER. 1-1/2", SPINDLE KEYWAY.250" X.125", BASE TO BOTTOM SPINDLE. 5-3/4", GERING. EQUAL, BASE. 14 STAND BASE, FLOW. RIGHT TO LEFT, MOTOR. VARI SPEED 15 HORSEPOWER.
12 Stand, Bradbury Rollforming Line, 4" arbor, 30" roll space, 80 FPM, 110' overall, 60" outside dimension, RL, 1977
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Bradbury
Year: 1977
, Manufacturer: Bradbury, Material Thickness: 12 Ga to 16 Ga (per tooling sets), Maximum Material Width: 25”, Roll Space: 30”, Number Of Stands: 12, Arbor Diameter: 4”, Vertical Adjustment: 7” to 13.5”, Horizontal Center Distance: 28”, Line Speed: 80 FPM, Overall Line Length: ...more
Featured
22 Stand, Tekfab, rollformer, 24" capacity
U.S. Asset Exchange Llc | Grand Rapids, MI
Category: Rollformers
Seller: U.S. Asset Exchange Llc
Location: Grand Rapids, MI
Mfr: Tekfab
Year: 2023
2.5” shaft diameter, 22 passes, can be configured to 16., 24” roll space can also be configured to 22”, 18” horizontal centers., 6” – 11” vertical centers., 8.125” (base to CL bottom shaft)., 11 single output pinion boxes (each pinion drives two stations)., 11 idler gear ...more
20 Stand, RS Contour #CRTM-1.5-20S, rollformer, 1.5" spindle diameter, 10" roll space, 6" horizontal centers, 4" verti adj., 40-120 FPM, AMS MP300
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Contour
Model: CRTM-1.5-20S
SERIAL 85-039, MODEL CRTM 1.5 20S, STANDS 20, SPINDLE DIAMETER 1.5", ROLL SPACE 10", HORIZONTAL CENTERS 6", VERTICAL 4", GEARING EQUAL 1:1, SPEED 40 TO 120 FPM, DIRECTION LEFT TO RIGHT, MOTOR 15 HP, CONTROLS AMS MP300.
12 Stand, Ardcor #SF, Roll Former, R-L, 1-1/2" spindle diameter, 5-1/2" roll space, 10" horizontal center, 5-1/4" vertical adj.
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ardcor
Model: SF
ARDCOR 12 STAND ROLL FORMER MODEL SF, SERIAL # 5134-A, 1964, Line Direction: Right to Left, Entry Guide, Number of Stands: 12, Roll Space: 5-1/2", Horizontal Centers: 10", Vertical Adjustment: 4" - 5-1/4", Spindle Diameter: 1-1/2", Spindle Ratio.Equal, Drive HSG Reduction Ratio.12:1, Base Coolant System, Main Drive ...more
16 Stand, Bradbury #315-B, rollformer, 2.5" x 24", #2709
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Bradbury
Model: 315-B
UTUBE NUMBER: 2709, MANUFACTURER: BRADBURY, MODEL NUMBER: 315-B, SERIAL NUMBER: 32646, YEAR: 1997, Line Direction: Left to Right, Driven Stands: 16, Spindle Diameter: 2-1/2", Roll Space: 24", Vertical Adjustment: 4" – 5-1/2", Horizontal Centers: 9", Center Line of Lower Spindle to Base: 4", Entry Guide ...more
10 Stand, Tishken #28-HW-3, rollformer, 3" spindle diameter, 30" rollspace, 14" horizontal centers, 6.5"-8.5" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 28-HW-3
UTUBE NUMBER: 4065, MANUFACTURER: TISHKEN, MODEL NUMBER: 28-HW-3, SERIAL NUMBER: 17872-681, Number of Stands: 10, Line Direction: Left to Right, Spindle Diameter: 3″, Roll Space: 30″, Horizontal Centers: 14″, Vertical Adjustment: 6-1/2″ – 8-1/2″, Base Top to Center Lower Spindle: ...more
16 Stand, Tishken #16-HMW-1-3/4, rollformer, 1-3/4" spindle diameter, 12" roll space, L to R, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 16-HMW-1-3/4
SERIAL. 14685-473, MODEL. 16-HMW-1-3/4, NUMBER OF STANDS. 16, SPINDLE DIAMETER. 1/3/4", ROLL SPACE. 12", HORIZONTAL SPINDLE CENTER. 9", SPEEDS. 50 FPM, VERTICAL DISTANCE BETWEEN CENTER. 4-1/2" to 5-3/4", GEARS RUN IN OIL. YES, DIRECTION. LEFT TO RIGHT, MOTOR. 15 HORSEPOWER.
12 Stand, Dahlstrom #360-12OB, rollformer, 1-1/2" spindle diameter, 10" roll space, 8" horizontal center, 4"-5" vertical adj., #13854J
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Dahlstrom
Model: 360-12OB
DAHLSTROM 12 STAND ROLLFORMER, STOCK# 13854J, S/N 330, MDL#360-12 OB, NUMBER OF STANDS 12, SPINDLE DIA 1-1/2", ROLL SPACE 10", HORIZONTAL CENTER 8", VERTICAL ADJ 4" - 5", BASE TO CENTER LINE OF LOWER SPINDLE 4-1/2", 10 HP MOTOR, START/STOP, RUN/JOG BUTTONS, NEW AC DRIVE.
18 Stand, Tishken #18-MLW-1-1/2, Rollformer, 6" Roll Space, Air-Clutch, 20 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 18-MLW-1-1/2
SERIAL. 11878-65, MODEL. 18-MLW-1-1/2, NUMBER OF STANDS. 18, ROLLSPACE. 6", DIAMETER OF ARBORS. 1-1/2", CENTER DISTANCE BETWEEN STANDS. 8", ARBOR ADJUSTMENT. 4 TO 5, BASE TO CENTER OF LOWER ARBOR. 4", EQUAL GEARED., MAXIMUM HEIGTH THAT CAN BE ROLLED. 1-1/2", AIR CLUTCH. YES, COOLANT. YES, MOTOR, HORSEPOWER. 20.
20 Stand, Tishken Rollformer, 12" W, 24 Ga., 10000 lb. Capacity, Servomatic IV Feed, 15-1/2" Shut Height, 40 Ton, 3" Stroke, 45 SPM, AMS Control
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
, Width: 12", Stands: 20, Spindle Diameter: 2", Gauge range: 24 Gauge, Product: Access Door Back Panel, Includes:, Mandrel Uncoiler, -36" wide Mandrel Uncoiler, -10,000 Lbs. Weight Capacity, Servomatic IV Press Feed Unit, 40 Ton x 3" Rousselle Straight Side Press, -Model 4S56, -Shut Height: 15-1/2", -Tonnage: 40 ...more
9 Stand, Lockformer #Cleatformer, rollformer, 20-22 gauge, Snap Lock, 25 FPM, S/N 5030
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Model: CLEATFORMER
LOCKFORMER CLEATFORMER - (3 IN 1) ROLLFORMER # 7447 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
14 Stand, Contour #CR-A-M-1.5-20/24R, rollformer, 1-1/2" arbor, 10" roll space, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
Model: CR-A-M-1.5-20/24R
SERIAL. FA076, MODEL. CR-A-M-1.5-20/24R, STANDS. 14, ARBOR DIAMETER. 1-1/2", VERTICAL ADJUSTMENT. 4 TO 5-1/2", ROLLSPACE. 10" MAXIMUM, HORIZONTAL SPACING. 8", GEAR RATIO. EQUAL 1:1, LOWER SPINDLE TO BASE. 6.5", SPEED. 0 TO 240 FPM, MOTOR HORSEPOWER. 15.
9 Stand, GMC #PL-18HEM, rollformer, 21 FPM, 4 HP, 220V., new
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: PL-18HEM
Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency., ISO 9001 certified, 4HP Heavy Duty AC ...more
12 Stand, Custom #FS1-6412-18, rollformer, 1-1/4" arbor, MP300, 8" horiz centers, 4" vertical centers, pinch rolls entry & exit from straight, 1993
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: FS1-6412-18
Year: 1993
MODEL: FS1-6412-18, S/N:931703, NEW: 1993, 12 STANDS, MP 300 CONTROL SYSTEMS, 1 3/4" ARBORS, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, 705 HP DRIVE, 3 OVER 3 DRIVEN STRAIGHTENER, PINCH ROLLS ENTRY AND EXIT FROM STRAIGHTENER, LFV FLYING AIR CUT-OFF, LISTING ID#25538.
8 Stand, Engel #800, duplex rollformer, 20-26 gauge, 90 FPM, #A6547
Sterling Machinery Exchange | South El Monte, CA
Category: Rollformers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Engel
Model: 800
Capacity 20-26 gauge Depth of Pocket / Size For Slip 1-1/16" Depth of Pocket / Size For Drive 1-1/8" Speed 90 feet per minute Motor / Voltage 5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM. Dimensions (L x W x H) 48" x 24" x 42" Stands 8 Stands.
20 Stand, RLM #RLM-FPE-3, rollformer, 3" spindle diameter, 20" roll space, 24" horizontal centers, 6-1/2"-12" vertical adj., 2025
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Model: RLM-FPE-3
Year: 2025
Rebuilt 20 Stand RLM Rollformer offers a 3" spindle diameter, 20" roll space, and 24" horizontal centers. a 50 HP motor and complete mechanical parts, this model is ideal for your rollforming needs., Rebuilt in 2026, NOTE: This is a 20 Stand Machine. We can build a machine with additional stands - P.O.R., 20 Stand - ...more
8 Stand, Dahlstrom #500-10-OB, rollformer, 2.5" arbor, 12" roll space, 18" horizontal centers, 5.5"-9.5" vertical adj., adj entry guides
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Dahlstrom
Model: 500-10-OB
SERIAL. 1006, MODEL. 500-10 STANDS / PASSES. 8, ARBOR SHAFT DIAMETER. 2.5" ROLLSPACE. 12" HORIZONTAL CENTERS. 18" VERTICAL CENTERS. 5-1/2" TO 9-1/2" BASE TO LOWER SPINDLE SPINDLE. 8-1/8", DIRECTION OF TRAVEL. RIGHT -> LEFT, SIDE PASSES BETWEEN STANDS. YES ENTRY GUIDES. YES, ADJUSTABLE, MOTOR. 10 HP.
14 Stand, ASC panel roll forming line with pre-cutoff & measuring system, 6'-42' long
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Asc
, Material: Galvanized, Galvalume, Pre-Painted, Thickness:.012” to.040”, 37” Between Housings, 2-3/4” Shaft, 3-1/2” OD, **Tooling for Roofing, Siding, Corrugated Materials (See pics), Includes:, - 36" Single-End Expanding Mandrel Uncoiler for 20” to 24” ID Coils, - ...more
16 Stand, Van Huffel, 1.5" dia arbor, 30 HP, 210 FPM, rollformer, 6" dia arbor roll space, #10499
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Van Huffel
Roll Diameter1.5 inchesNumber of Stands16 Diameter of Arbor1.5 inchesPower30 horsepower, NUMBER OF STANDS. 16, ARBOR DIAMETER. 1.5", ROLL SPACE. 6", VERTICAL ADJUSTMENT. 4” to 6”, HORIZONTAL CENTERS. 9”, SIDE PASS ROLLS. 16 (1 BETWEEN EACH STAND), BASE TO LOWER CENTER. ...more
20 Stand, Dahlstrom #450-22OB, rollformer, 2" shaft diameter, 4.5"-5.75"vertical, 24" roll space, 10" horiz centers, 30-90 FPM
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dahlstrom
Model: 450-22OB
Dahlstrom Rollformer, -Model: 450-22 OB, -Stands: 20 on a 22 Stand Base, -Shaft Diameter: 2.00", -Vertical Adjustment: 4.50" - 5.75", -Roll Space: 24", -Horizontal Centers: 10", -Base to Center of Bottom Shaft: 5.50", -Floor to Top of Base: 34", -Speed Range: 30 - 90 FPM, -Electrics: 440 V/3 PH/60 HZ, -Operators ...more
28/30 Stand, Dreistern #P915-P1815, rafted type U joint drive rollformer, 1986, #61598
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P9SP-1815
Year: 1986
SERIAL. 86-2-62, NEW. 1986, MODEL. P915-P1815, NUMBER OF STANDS. 28 ON 30 STAND BASE, SHAFT DIAMETER. 1-1/2", ROLL SPACE. 12", VERTICAL ADJUSTMENT. 3" TO 5-1/4", BASE TOP TO LOWER SPINDLE CENTER. 4-1/2", RAFTED. YES, UNIVERSAL JOINT DRIVE. YES, EQUAL AND UNEQUAL GEAR BOXES. YES, VARIABLE SPEED DRIVE CONTROL. T B WOODS ...more
16 Stand, Metalform, 3" roll shaft diameter, 36" roll space, 30" horiz centers, 40HP, #53285
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Metalform
NUMBER OF BASES. 2, NUMBER OF STANDS ON EACH BASE. 8, SIZE OF EACH BASE. 4'7"H - 21'L - 5'2"W, ROLL SPACE. 36", ROLL SHAFT DIAMETER. 3", HORIZONTAL CENTER DISTANCE. 30", VERTICAL CENTER DISTANCE. 7-1/2" - 10-1/2" RANGE, BASE TOP TO BOTTOM SPINDLE CENTER. 8", ELECTRICAL CONTROLS. YES, BUTTON CONTROLS. 4 ...more
14 Stand, Dahlstrom #450-14-0B, rollformer, 1-3/4" roll shaft, 8" roll space, air clutch, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dahlstrom
Model: 450-14-0B
SERIAL. 385, MODEL. 450-14-0B, NUMBER OF STANDS. 14, ROLL SHAFT DIAMETER. 1-3/4", NOMINAL ROLL SPACE. 8", HORIZONTAL CENTER DISTANCE. 10", VERTICAL CENTER DISTANCE. 4" TO 5-1/2", BASE TOP TO BOTTOM SPINDLE CENTER. 6", BASE HEIGHT. 34", SPEED RANGE. 40 TO 120 FPM, AIR CLUTCH. YES, MOTOR DRIVE MOTOR. 10, TOOLING ON ...more
JUST ADDED!
9 Stand, GMC #PL-18HEM, Hemming forming machine, 3/8" hemming width, 21 FPM, 18 gauge
Manufacturing Solutions | Santa Ana, CA
Category: Rollformers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: PL-18HEM
HVAC MACHINE TOOLS24GA to 18GA 3/8"9 stations with 9 pairs of rolls on each side21 FPM4HP, 220V, 3 Phase, 15 Amp60" x 25" x 40"685 Lbs..
Morlin #2400, Morlin, 24 gauge, 35 FPM, floor stand w/ wheels
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Morlin
Model: 2400
S:, All forming head components are precision crafted using case hardened steel and needle bearings throughoutExclusive tuck-away power cord for easy portabilityFloor stand with wheels, MODEL: 2400, SERIAL#: EGL-4-00223, CAPACITY: 24-to-28-gauge material, SPEED: 35 fpm, MOTOR: 1/3 H.P., 115 Single phase, 5.4 AMPS, 60 ...more
22/24 Stand, Tishken #24HW-S-3-1/2, Accelerator rollformer, 2-1/2" shaft diameter, 1999
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 24HW-S-3-1/2
Year: 1999
, SERIAL. 21939-299, YEAR NEW. 1999, MODEL. 24-HW-S-3-1/2, NUMBER OF STANDS. 22 (ON 24 STAND BASE), ARBOR SHARFT DIAMETER. 3-1/2", ROLL SPACE. 21", HORIZONTAL CENTERS. 14", VERTICAL ADJUSTMENT. 6-1/2" TO 8-3/8", LOWER SPINDLE TO BASE., GEARING. EQUAL, DIRECTION OF TRAVEL. LEFT TO RIGHT, FLOOR TO PASS LINE. 46" ...more
Yoder #M3, outboard stands (2 available)
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Yoder
Model: M3
UTUBE NUMBER: 2532, MANUFACTURER: YODER, MODEL NUMBER: M3, SERIAL NUMBER:, YEAR:, (2) Yoder M3 Outboard Stands, Bottom Shaft to Base: 10", Minimum Vertical Center: 7", Maximum Vertical Center: 13-1/4", Bore: 3", OVERALL DIMENSIONS:, APPROXIMATE WEIGHT:, LOCATION: Universal Warehouse, Perryburg, Ohio ...more
16 stand, ASC #R-Panel, Rollforming Line, 36" width, 200 FPM, w/ reel, coil car, & cut off, Beck S-II programmable Control
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Asc
Model: R-PANEL
YODER BROTHERS MACHINERY LOT #21176, UNCOILER & COIL CAR:, CAPACITY. 20,000 LBS, COIL WIDTH. 48", POWER DRIVEN. YES, HYDRAULIC EXPANSION. YES, POWERED COIL CAR. YES, ASC ROLLFORMER:, TOOLED FOR. R-PANEL, JOB # / SERIAL. 11441, MODEL. CAS-4-50-16, NUMBER OF STANDS. 16, ARBOR DIAMETER. 4", TOOLING ROLLSPACE. 50" ...more
10 Stand, Fisher #SL-1, snap lock roll former
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: SL-1
Main Technical Data:, Dimensions: Main Technical Data:, Dimensions: 1600x850x1000mm, Weight: 400 kg, Motor Power: 1.5kw, Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz, Forming Stands: 10, Forming Steel Thickness: 0.4-0.7mm, Forming Aluminum Thickness: 0.7-1.0mm, Lock Height: 26mm or 31mm, Tolerance: +-1mm, Roller ...more
23 Stand, Ardcor rollformer, 2.5" x 48", #3364
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Ardcor
Model: 3364
UTUBE NUMBER: 3364, MANUFACTURER: ARDCOR, MODEL NUMBER: F15-2-1/2-48, SERIAL NUMBER: 83-088, YEAR: 1983, Line Direction: Right to Left, Number of Passes: 24, Spindle Diameter: 2-1/2", Roll Space: 48", Horizontal Center: 16", Vertical Adjustment: 5" – 9", Base Top to Center Lower Spindle: 6-1/2", Spindle Key ...more
15 Stand, B & K, Roll Former, R-L, 1-1/4" spindle diameter, 11" roll space, 12" horizontal center, 5" vertical adj., 150 FPM
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: B & K
, Number of Stands: 15, Line Direction: Right to Left, Spindle Diameter: 1-1/4", Roll Space: 11", Horizontal Center: 12", Vertical Adjustment: 3-1/2" - 5", Base to Center Lower Spindles: 3-1/2", Base Working Surface: 26-1/2", Base Coolant Trough: 31-1/2", Strip Pass Line: 38", Line Speed: 150 FPM.
10 Stand, B & K / MV, rollforming line, 10" roll space, 12" horizontal centers, 4" -5" vertical adj., 1.25" spindle diameter, 38" passline, 150 FPM
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
UTUBE NUMBER: 3086, MANUFACTURER: B&K/MV, Number of Stands: 10, Line Direction: Right to Left, Roll Space: 10″, Horizontal Centers: 12″, Vertical Adjustment: 4″ – 5″, Base to Center Lower Spindle: 4″, Spindle Diameter: 1-1/4″, Base Working Surface: 26-1/2″, Base ...more
15 Stand, RDF, rollformer, 1-1/2" x 10", 20 HP, 100 FPM, coolant pump, push button console
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Rdf
UTUBE NUMBER: 2535, MANUFACTURER: RDF, MODEL NUMBER:, SERIAL NUMBER:, YEAR:, Number of Stands: 15, Line Direction: Right to Left, Roll Shaft Diameter: 1-1/2", Roll Space: 10", Horizontal Centers: 12", Vertical Centers: 4-1/2" – 6-1/2", Base to Lower Shaft: 6", Line Speed: 100 FPM, Max. ...more
10 Stand, B & K, Roll Former, R-L, 1-1/4" spindle diameter, 10" roll space, 12" horizontal center, 5" vertical adj., 150 FPM
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: B & K
, Number of Stands: 10, Line Direction: Right to Left, Roll Space: 10", Horizontal Centers: 12", Vertical Adjustment: 4" - 5", Base to Center Lower Spindle: 4", Spindle Diameter: 1-1/4", Base working Surface: 26-1/2", Base Coolant Trough: 31-1/2", Pass Line: 38", Line Speed: 150 FPM, Pushbutton Motor Starter & ...more
10 Stand, Dahlstrom #360-1, rollformer, 1.5" spindle diameter, 14.5" roll space, 8" horizontal centers, 4"-5" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Dahlstrom
Model: 360-1
UTUBE NUMBER: 4224, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 360-1, SERIAL NUMBER: 343, Number of Stands: 10, Line Direction: Right – Left, Spindle Diameter: 1-1/2, Roll Space: 14-1/2, Horizontal Center: 8, Vertical Adjustment: 4 5, Base Top to Center Lower Spindles: 4-1/2, Spindle Key Size: 1/4, Gearing Ratio: ...more
14 Stand, Tishken #14-HXM-3-1/2, heavy duty rollformer, 3-1/2" arbor diameter, 24" roll space, 40 HP
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 14-HXM-3-1/2
MODEL. 14-HXW-3-1/2, NUMBER OF PASSES. 14 (8 & 6), ARBOR DIAMETER. 3-1/2", MAX ROLL SPACE. 24", VERTICAL ADJUSTMENT. 8" TO 11", HORIZONTAL CENTERS. 18", BASE TO BOTTOM SHAFT. 10", DIRECTION OF TRAVEL. R TO L, ENTRY EDGE GUIDES. YES, EXIT STRAIGHTENING HEAD. YES, CONTROL STATION. YES, MOTOR. 40 HP.
9 Stand, Dahlstrom, 2" dia.spindle, 30" roll space, air clutch, 30 HP, used, #7840
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dahlstrom
Spindles: 9, Spindle Diameter: 2, Roll Space: 30, Horizontal Centers: 24, Vertical adjustment: 5.5 - 9, Top of Base to Center of Bottom Spindle: 8 1/4, (1) Extra Spindle Box & Shafts, Air Clutch, Main Drive Motor (30 HP), Push Button Controls, AMS #MP-300 Series Length Console Control, Approximate Dimensions: 21 L ...more
12 Stand, Bradbury #425, purlin duplex rollformer, 3-1/2" spindle diameter, 50 HP, 200 FPM
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Bradbury
Model: 425
Manufacturer: Bradbury, Model No: 425, Spindle diameter: 3-1/2", Vertical Adjust: 6-14", Horizontal Centers: 22", Roll Space : 30", Drive Motor:: 50HP, Max Speed: 200 fpm, Number of Stands: 12 and 12 (Duplex), C Web 6", 8", 10" x 2.5" Flange, Z Web: 6", 8", 10", 12" x 2.5" Flange.
9 Stand, Proma #1-3/4DH-02, duplex rollformer, 1.75"spdl diameter, 18"-152" roll space, 1986
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Proma
Model: 1-3/4DH-02
Year: 1986
MODEL #: 1 3/4DH-02, SERIAL #: 472-DEVILB, 1-3/4" SPINDLE DIAMETER, 1/4" x 1/8" SPINDLE KEYWAY, 6-5/8" BASE TO SPINDLE BOTTOM, 18" - 152" ROLLSPACE, 8" HORIZONTAL CENTERS, 4-1/2" -5-1/2" VERTICAL CENTERS, 1:1.5 SPINDLE GEAR RATIO, 3:1 DRIVING HOUSING REDUCTION RATIO, 10 HP MOTOR, GOOD CONDITION.
JUST ADDED!
10 Stand, Flagler #L-2520-OB-R, rollformers, 2.5" vertical center distance, 4" horizontal center distance, 6" roll space
Machinery Network Inc | Encino, CA
Category: Rollformers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flagler
Model: L-2520-OB-R
Stations 10, Vertical Center Distance 2.5", Horizontal Center Distance 4", Roll Space 6", Main Drive 7.5 Hp, Line Speed 100 fpm Inverter Drive, Spindles: Hardened & Ground, Shoulder Type w/ Thrust Bearings, Spindle Size (bearings) 1", Spindle Size (at roller dies) 1", Bearing Type Torrington HJ, 110" long x 36" ...more
