601 - 700 of 2079 listings
Haas #ST-15, with Barfeed, Auto Tool Presetter, Parts Catcher, Coolant Mist Condenser, Chip Conveyor, 2023, Low Hours
Tight Tolerance Machinery | Peoria, AZ
Category: CNC Lathes and Turning Centers
Seller: Tight Tolerance Machinery
Location: Peoria, AZ
Mfr: Haas
Model: ST-15
Year: 2023
Haas ST-15 CNC Lathe with Barfeeder, NEW: 2023, Max Swing Over Bed.16.5", Max Turning Diameter.12.0", Max Turning Length.16.0", X-Axis Travel.7.88", Z-Axis Travel.16.00", Spindle Motor.20 HP, Spindle Nose.A2-6, Spindle Bore.3.5", Max Bar Capacity.2.5", Spindle Speed.4000 RPM, Rapid Traverse Rate.1200 IPM, Turret ...more
Haas #ST-15Y, CNC Turning Center, 7.88" X, 2" Y, 16" Z, 11" swing over carriage, 11" max. cutting diameter, 8" chuck, 20 HP, 4000 RPM, 12-station tools, 220 Volts, 2017
Lenmark Industries | Langley, BC
Category: CNC Lathes and Turning Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Haas
Model: ST-15Y
Year: 2017
SKU: 152595, Model: ST-15Y, Year: 2017, Condition: Used, S/N: 3107261, Horsepower: 20 hp, Swing Over Ways: 16.5 ", Swing Over Carriage: 11 ", Bore Diameter: 2.5 ", Electrical :, Voltage: 220 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 81.00 (H) x 70.00 (W) x 126.00 (L) inches, Additional ...more
Haas #ST-20, CNC turning center, 21" swing, 8" chuck, 3-jaw, 2" bar, 13" dia., 22.5" lgth, A2-6, 12 turret, rigid tap, tailstock, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-20
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, A2-6 Spindle Nose, 12 Station ...more
JUST ADDED!
Haas #ST-20, CNC Lathe, 21" Swing, 13" diameter x 22.5" L Cutting Size, 8" Chuck, 2.5" Bar, 20 HP, 4000 RPM, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2017
CNC Lathe, used condition. Featuring 8.3 chuck, max part swing 21, bar capacity 2.5, spindle 4,000 RPM, 20 HP motor, and a 3-phase electrical setup. Includes bar feeder, 3 jaw chuck, Royal Collet Chuck, and tailstock., Chuck Size: 8.3, Max Part Swing: 21, Bar Capacity: 2.5, X-Axis Travels: 8.4, Z-Axis Travels: 22.5 ...more
JUST ADDED!
Haas #ST-20, CNC Lathe, 8" Chuck, 21" Swing, 20 HP, 4,000 RPM, 12-Station Turret, Chip Conveyor, 2023
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2023
CNC Lathe, used. s 8.3" chuck, 21" max swing, 22.5" cutting length, 4000 RPM spindle, Haas CNC control, and 8.4" X-axis travel. Includes chip conveyor, parts catcher, hydraulic tailstock., Chuck Size: 8.3, Max Part Swing: 21, Max Cutting Diameter: 13, Max Cutting Length: 22.5, Bar Cap: 2.5, X Axis Travel: 8.4, Z Axis ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
JUST ADDED!
Haas #ST-20, CNC Lathe, 21" Swing, 10" Chuck, 2" Bar, 11.8" Cutting diameter, 22.5" Turning length, 20 HP, 4000 RPM, 12-Station Turret, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2020
Used CNC Lathe, used. s: 2.0 bar capacity, 10 chuck size, 4,000 RPM spindle speed, 20 HP motor, 12-station turret, and more. Haas CNC Control, belt conveyor, lighting, parts catcher, and programmable tailstock., Bar Capacity: 2.0, Chuck Size: 10, Spindle Speed: 4,000 RPM, Spindle Motor: 20 HP, X-Axis Travel: 8.4 ...more
Haas #ST-20, CNC lathe, 21" swing, 2" bar, Samchully 3-jaw chuck, 13" turning diameter, 22.5" turning length, 2012
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haas
Model: ST-20
Year: 2012
Stock #: 141260004, Location: GA, Brand: Haas, Model: ST-20, Year: 2012, Approx. Shipping Weight: 8,500 LBS., Approx. Shipping Dimensions: 12' L x 8' W x 8' H, Skidding Fee: Skidding Unavailable, Loading Fee: Loading Included, Max Turning Diameter: 13", Max Swing Over Bed: 21", Max Turning Length: ...more
JUST ADDED!
Haas #ST-20, CNC Lathe, 21" swing, 13" diameter x 22.6" L max, 2.5" bar, 20 HP, 4k RPM, 3.5" bore, 12 tool, Bar Feeder, Tool Presetter, Parts Catcher, tailstock, 2023
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: ST-20
Year: 2023
Make: Haas, Model: ST-20, Year: 2023, Machine Location: Upon Request, Chuck Size: 8.3″, Max Part Swing: 21″, Max Cutting Diameter: 13″, Max Cutting Length: 22.5″, Bar Cap: 2.5″, X Axis Travel: 8.4″, Z Axis Travel: 22.5″, Spindle Nose: A2-6, Spindle Motor: 20 HP, Spindle Speed: ...more
Haas #ST-20, CNC Lathe, Bar Feeder, Tailstock, 21" swing, 2.5" bar, 4000 RPM, 20 HP, 13" diameter x 22.5" L, 220 V., 3ph, 2017
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: ST-20
Year: 2017
Make: Haas, Model: ST-20, Year: 2017, Machine Location: Upon Request, Chuck Size: 8.3″, Max Part Swing: 21″, Bar Capacity: 2.5″, X-Axis Travels: 8.4″, Z-Axis Travels: 22.5″, Spindle Speed: 4,000 RPM, Spindle Motor: 20 HP, Spindle Nose: A2-6, Max Cutting Diameter: 13″, Max Cutting ...more
Haas #ST-20, CNC lathe, 31.7" swing, 8" chuck, 2" bar, 20 HP, 4000 RPM, chip conveyor, 2013
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20
Year: 2013
2013 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", Max. Turning Diameter. 15", Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Tailstock. Yes, Live Tooling. No, HAAS CNC Control, Chip Conveyor.
Haas #ST-20, 2-Axis CNC Lathe, 31.7" swing, 15" turning diameter, 20.5" machining length, 8" chuck, 2" bar, 20 HP, 4000 RPM, Automatic Tool Presetter, 2013
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2013
Used CNC Lathe for sale. s include 31.75" swing, 20.5" machining length, 2-axis operation, 8.3" chuck size, 2" bar capacity, and 4,000 RPM max speed. HAAS CNC Control, auto tool presetter, and more., 2013 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", # Axis. 2, Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp ...more
Haas #ST-20, CNC lathe with automatic parts loader, 31.7" swing, 8" chuck, 2" bar, 20 HP, 2023
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20
Year: 2023
2023 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", Max. Turning Diameter. 15", Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Tailstock. No.
JUST ADDED!
Haas #ST-20, CNC Lathe, 2-Axis, 31.8" Swing, 20.5" Machining length, 8" Chuck, 2" Bar, 15" Turning diameter, 20 HP, 4000 RPM, 2010
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2010
CNC Lathe in used condition. s include 31.75" swing, 20.5" machining length, 8.3" chuck, and 2" bar capacity. BOT turret, chip conveyor, programmable tailstock, and more., 2010 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", # Axis. 2, Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Turning ...more
JUST ADDED!
Haas #ST-20, CNC Lathe, 31.8" Swing, 20.5" Machining length, 8" Chuck, 2" Bar, 15" Turning diameter, 20 HP, 4000 RPM, 12-Station Turret, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20
Year: 2012
Used CNC Lathe, a new spindle cartridge, X-axis components, and more. s a 31.75" swing, 20.5" machining length, 8.3" chuck, and 4,000 max RPM. Includes probing system, chip conveyor, and 12 station BOT turret., 2012 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp ...more
JUST ADDED!
Haas #ST-20, CNC lathe, 8" chuck, 2" bar, 10" turning diameter, 20" centers, 12 station turret, tailstock, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-20
Year: 2011
Haas ST20 CNC Lathe, Chuck Size: 8″, Bar Capacity: 2″, Turning Diameter: 10″, Spindle Speed: 4,500 RPM, Control: Haas CNC, Distance Between Centers: 20″, Turret: 12 Station, s, Haas CNC Control, Auto Tool Presetter, Tailstock, Haas Barfeed.
Haas #ST-20SS, CNC Lathe, 20.7" swing, 21" max. turning length, 8" chuck, 2" bar, 20 HP, 4000 RPM, 24-station turret, programmable tailstock, parts catcher, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20SS
Year: 2011
Used CNC Lathe available. s 2" bar capacity, 8" chuck, 4,000 RPM spindle, and 20 HP motor. Includes parts catcher, programmable tail stock, and 24-station turret. Max swing 20.75", weight 9,000 lbs., Bar Capacity: 2", Chuck Size: 8", Spindle Speed: 4,000 RPM, Automatic Tool Presetter, Spindle Motor: 20 HP, X Axis ...more
Haas #ST-20SS, 3-Axis CNC Lathe, 31.7" swing, 10" turning diameter, 21" machining length, 8" chuck, 2" bar, 30 HP, 5000 RPM, programmable tailstock, live tooling, 2016
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20SS
Year: 2016
Used CNC Lathe: 31.75" swing, 21" machining length, 2-axis with 8.3" chuck and 2" bar capacity. s 30 hp, 5,000 RPM, HAAS control, bar feeder, live tooling, tool presetter, chip conveyor., 2016 HAAS ST-20SS, Swing. 31.75", Machining Length. 21", # Axis. 3, Chuck Size. 8.3", Bar Capacity. 2", Power. 30 hp, Max RPM. ...more
Haas #ST-20SS, CNC lathe, 31.7" swing, 8" chuck, 2" bar, live tooling, bar feed, 30 HP, 2016
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20SS
Year: 2016
2016 HAAS ST-20SS, Swing. 31.75", Machining Length. 21", Max. Turning Diameter. 10", Distance Between Centers. 21", X-Axis. 9.3", Z-Axis. 21", ATC. 24, Chuck Size. 8.3", Bar Capacity. 2", Power. 30 hp, Max RPM. 6,000 RPM, Tailstock. Yes, Live Tooling. Yes, Dimensions. 143 x 90 x 87, Weight. 10,500 Lbs, ** $159k ...more
Haas #ST-20SS, CNC Lathe, 31.7" swing, 21" machining length, 10" turning diameter, 8" chuck, 30 HP, 5000 RPM, 2011
Silverlight CNC | Barrington, IL
Category: CNC Lathes and Turning Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Haas
Model: ST-20SS
Year: 2011
2011 HAAS ST-20SS CNC Lathe for sale. s include a 31.75" swing, 21" machining length, 8.3" chuck size, and 30 hp power. Max RPM is 5,000. Comes with chuck, presetter, chip conveyor, and tool holders., 2011 HAAS ST-20SS, Swing. 31.75", Machining Length. 21", Chuck Size. 8.3", Bar Capacity. 2", Power. 30 hp, Max RPM. ...more
JUST ADDED!
Haas #ST-20SS, CNC Lathe, 2-Axis, 31.8" Swing, 21" Machining length, 8" Chuck, 2" Bar, 10" Turning diameter, 30 HP, 5000 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20SS
Year: 2011
2011 HAAS ST-20SS CNC Lathe in used condition s a 31.75" swing, 21" machining length, 2 axes, and a powerful 30 hp motor. It includes an 8.3" chuck, presetter, chip conveyor, and tool holders. Max RPM of 5,000. Tailstock included., 2011 HAAS ST-20SS, Swing. 31.75", Machining Length. 21", # Axis. 2, Chuck Size. 8.3" ...more
JUST ADDED!
Haas #ST-20T, CNC Lathe, 2-Axis, 21" Swing, 22.5" Machining length, 8" Chuck, 2.5" Bar, 13" Turning diameter, 20 HP, 4000 RPM, 12-Station Turret, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20T
Year: 2015
2015 HAAS ST-20T, Swing. 21", Machining Length. 22.5", # Axis. 2, Chuck Size. 8", Bar Capacity. 2.5", Power. 20 hp, Max RPM. 4,000 RPM, Turning Dia. 13", Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Control. CNC (HAAS), Haas Control, 8" 3-Jaw Chuck, Programmable Tailstock, Rigid Tap, Chip Conveyor, Internal High ...more
JUST ADDED!
Haas #ST-20T, CNC Lathe w/Bar Feeder, 31.7" Swing, 15" diameter x 21" L Cutting Size, 8" Chuck, 2" Bar, 20 HP, 4000 RPM, 12-Position Turret, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20T
Year: 2017
Used CNC Lathe with HAAS Bar Feeder and advanced s like a 20 hp spindle, 8" jaw hydraulic chuck, and 31.75" swing. Includes Royal collet chuck and more. With 8,350 servo hours., MAX SWING 31.75", MAX CUTTING DIAMETER 15", MAX CUTTING LENGTH 21", CHUCK SIZE 8.3", BAR CAPACITY 2", SPINDLE NOSE A2-6, SPINDLE MOTOR 20 hp ...more
JUST ADDED!
Haas #ST-20T, CNC Lathe, 2-Axis, 31.7" Swing, 21" Machining length, 10" Chuck, 2.5" Bar, 15" Turning diameter, 20 HP, 4 RPM, 1900 Cutting hours, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20T
Year: 2018
CNC Lathe, used, featuring a 31.75" swing, 21" machining length, and 10" chuck. Powered at 20 hp, it has a maximum RPM of 4. tailstock and chip conveyor, it has under 1900 cutting hours., 2018 HAAS ST-20T, Swing. 31.75", Machining Length. 21", # Axis. 2, Chuck Size. 10", Bar Capacity. 2.5", Power. 20 hp, Max RPM. 4 ...more
Haas #ST-20T, cnc lathe, 31.7" swing, 10" chuck, 20 HP, 4k RPM, tailstock, parts catcher, Chip Conv., 12 tool, Bar Feeder, 2017
Clark Machinery Sales LLC | Hunt Valley, MD
Category: CNC Lathes and Turning Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Haas
Model: ST-20T
Year: 2017
2017 HAAS ST-20T, MAX SWING. 31.75", MAX CUTTING DIAMETER. 15", MAX CUTTING LENGTH. 21", CHUCK SIZE. 8.3", BAR CAPACITY. 2", SPINDLE NOSE. A2-6, SPINDLE MOTOR. 20 hp, SPINDLE SPEED. 4,000 RPM, TURRET POSITIONS. 12, TURRET TYPE. BOLT-ON, HAAS CNC CONTROL, HAAS BAR FEEDER, 8" 3-JAW HYDRAULIC CHUCK, ROYAL COLLET CHUCK ...more
JUST ADDED!
Haas #ST-20T, CNC Lathe, 31.8" Swing, 21" Machining length, 10" Chuck, 2" Bar, 15" Turning diameter, 20 HP, 4 RPM, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20T
Year: 2012
Used CNC Lathe. s include 31.75" swing, 21" machining length, and 15" turning diameter. a Renishaw probe, tool setter, tailstock, and chip conveyor., 2012 HAAS ST-20T, Swing. 31.75", Machining Length. 21", Chuck Size. 10", Bar Capacity. 2", Power. 20 hp, Max RPM. 4 RPM, Turning Dia. 15", Tailstock. Yes, Control. CNC ...more
JUST ADDED!
Haas #ST-20Y, CNC Lathe, 8" Chuck, 21" Swing, 20 HP, 4,000 RPM, Y-Axis, Live Tooling, Chip Conveyor, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20Y
Year: 2020
Used CNC Lathe in good condition offers 31.75" swing, 21" machining length, and 20 hp power. s live tooling, 4,000 RPM max, 8.3" chuck, 2" bar capacity, and chip conveyor., 2020 HAAS ST-20Y, Swing. 31.75", Machining Length. 21", # Axis. 3, Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Turning ...more
JUST ADDED!
Haas #ST-20Y, 4-Axis CNC Lathe, 31.7" swing, 12" turning diameter, 21" machining length, 8" chuck, 2" bar, 20 HP, 4000 RPM, Y-axis, bar feeder, 2021
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-20Y
Year: 2021
2021 HAAS ST-20Y CNC lathe with bar feeder available. s a swing of 31.75", 21" machining length, 4-axis, 8.3" chuck size, 2" bar capacity, 20 hp, max 4,000 RPM, and live tooling., 2021 HAAS ST-20Y, Swing. 31.75", Machining Length. 21", # Axis. 4, Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM ...more
Haas #ST-20Y, CNC lathe, 31.7" swing, 8" chuck, 2.5" bar, 12" dia., 21" lgth, 12 turret, A2-6, 4000 RPM, 20 HP, rigid tap, 2013
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-20Y
Year: 2013
2013 Haas ST-20Y w/ Live Tooling C-Axis, Y-Axis, Live Holders, Tailstock, Bar Feeder & More, Haas ST-20Y CNC Lathe w/ Y-Axis, Live Tooling, & Bar Feeder, New: 2013, 3-Jaw Hydraulic Chuck: 8.3", Bar Capacity: 2.5", Spindle Bore: 3.5", X-Axis Travel: 9.3", Z-Axis Travel: 21", Turret: 12 Station VDI/BOT, Spindle: ...more
Haas #ST-20Y, CNC lathe, 31.7" swing, 8" chuck, 2.5" bar, A2-6, 24 turret, 20 HP, 4000 RPM, rigid tap, 2019
Champion Machinery Inc | Fort Mill, SC
Category: CNC Lathes and Turning Centers
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Haas
Model: ST-20Y
Year: 2019
, Chuck Size 8", Max Diameter Bar Capacity 2.5", Max Swing Over Front Apron / Cross Slide 31.75" / 20.75", Max Machining Length 21", Spindle Motor 20 HP AC, Spindle Speed 4000 RPM, Spindle Nose A2-6, Tools 24, Milling Speed 6000 RPM, X-Axis Travel 9.3", Z-Axis Travel 21", Y-Axis Travel +/- 2.0", Machine Dimensions (L ...more
Haas #ST-20Y, CNC lathe, robot inbox, 2021
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: ST-20Y
Year: 2021
Manufacturer Haas, Model ST-20Y, Year 2021, Condition Used.
JUST ADDED!
Haas #ST-20Y, CNC lathe, robot inbox, 2021
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: ST-20Y
Year: 2021
Manufacturer HaasModel ST-20YYear 2021Condition Used.
Haas #ST-25, CNC lathe, 20.7" swing, 10" chuck, 3" bar, 31" centers, 15" dia., 21" lgth, 2-Axis, tool presetter, parts catcher, 2021
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-25
Year: 2021
EXTREMELY LOW HOURS ON THIS 2021 HAAS ST-25. Used CNC Lathe s include 20.75" swing, 21" machining length, 10" chuck, and 3" bar capacity. Delivers 30hp with a max RPM of 3400 and 15" turning diameter. No tailstock. Ideal for precision machining., 2021 HAAS ST-25, Tool Pre-setter, Parts Catcher, Chip conveyor, Bar ...more
JUST ADDED!
Haas #ST-25, CNC Lathe, 8.4" X, 22.5" Z, 21" max. part swing, 11.75" max. cutting diameter, 22.5" max. cutting length, 3.5" spindle bore, 30 HP, 3400 RPM, 12-station turret, 2017
Trader Machinery Inc | Concord, ON
Category: CNC Lathes and Turning Centers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-25
Year: 2017
21"11.75"22.5"3"8.4"22.5"945 ipm945 ipm4100 lbf5100 lbfA2-630 Hp3,400 rpm300.0 ft-lbf @ 500 rpm3.5"12 station4"55 Gal.9,000 lbs.
JUST ADDED!
Haas #ST-25, CNC Lathe, 2-Axis, 31.7" Swing, 22.5" Machining length, 10" Chuck, 3" Bar, 30 HP, 3400 RPM, tailstock, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-25
Year: 2014
Used CNC Lathe s 31.7" swing, 22.5" machining length, and 10" chuck size. 30 hp, max RPM of 3,400, a 3" bar capacity, 15.5 turning diameter, 2-axis, and a tailstock., 2014 HAAS ST-25, Swing. 31.7", Machining Length. 22.5", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM, Turning Dia. ...more
JUST ADDED!
Haas #ST-25, CNC Lathe, 2-Axis, 31.7" Swing, 21" Machining length, 10" Chuck, 3" Bar, 15.5" Turning diameter, 30 HP, 3400 RPM, 2021
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-25
Year: 2021
Used CNC Lathe, 2-axis, 31.7" swing, 21" machining length, 10" chuck, 3" bar capacity, 30 hp, 3,400 RPM max. tool pre-setter, parts catcher, chip conveyor, and bar feeder with liners., 2021 HAAS ST-25, Swing. 31.7", Machining Length. 21", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM ...more
Haas #ST-25Y, CNC lathe with robot, 20.7" swing, 21" centers, 10" chuck, 3" bar, 15" turning diameter, 2022
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haas
Model: ST-25Y
Year: 2022
Stock #: 133250018, Brand: Haas, Model: ST-25Y, Year: 2022, Loading Fee: Rigging Required, Chuck Size: 10", Bar Capacity: 3", Swing: 20.75", Turning Diameter: 15", Spindle Speed: 3,400 RPM, Control: Haas CNC, Distance Between Centers: 21", Turret: 24 Station, Chip Removal: Chip Conveyor, 5000 RPM ...more
Haas #ST-25Y, CNC turning center, 31.7" swing, 10" chuck, 3" bar, live tooling, automatic door, 2018
Hindley Machine Tool Sales LLC | Grand Rapids, MI
Category: CNC Lathes and Turning Centers
Seller: Hindley Machine Tool Sales LLC
Location: Grand Rapids, MI
Mfr: Haas
Model: ST-25Y
Year: 2018
Manufacturer: HAAS Model: ST-25Y Year: 2018 Stock #: 221 Status: For Sale Serial #: 3109742 Country: United States On Our Floor in Grand Rapids, Michigan., Specificaitons:, 8.4" X-Axis Travel, 22.5" Z-Axis Travel, 11.75" Max. Turning Dia., 21" Max. Turning Length, 31.75" Max. Swing, 24 Station Turret, 3400rpm Max. ...more
Haas #ST-25Y, 3-Axis CNC Lathe, 31.7" swing, 21" machining length, 12" turning diameter, 10" chuck, 3" bar, 30 HP, 3400 RPM, tailstock, live tooling, 2022
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-25Y
Year: 2022
HAAS ST-25Y CNC Lathe (2022) 30 hp, 31.75" swing, 21" machining length, and 3,400 RPM. s live tooling, tailstock, 10" chuck, 3" bar capacity, high-pressure coolant, and parts catcher., 2022 HAAS ST-25Y, Swing. 31.75", Machining Length. 21", # Axis. 3, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 ...more
Haas #ST-25Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 12" dia., 21" lgth, 30 HP, 3400 RPM, 3-Axis, tailstock, live tool, 2022
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-25Y
Year: 2022
, SWING 31.75", MACHINING LENGTH 21", CHUCK SIZE 10", BAR CAPACITY 3", POWER 30 hp, MAX RPM 3,400 RPM, TURNING DIA 12", TAILSTOCK No, LIVE TOOLING Yes, CONTROL CNC.
JUST ADDED!
Haas #ST-25Y, CNC Lathe, 10" Chuck, 3,400 RPM, Y-Axis, Live Milling, 12-Station Turret, Parts Loader, 2022
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-25Y
Year: 2022
CNC Lathe in used condition. s include 10" hydraulic chuck, 3,400 RPM spindle, 6,000 RPM live milling, Y-axis, and a 12-position turret. Enhanced with an auto door, chip conveyor, and automatic parts loader system., Chuck Size 10" 3-Jaw Hydraulic, Maximum Swing Over Cross Slide 21", Maximum Machining Diameter 11.75" ...more
JUST ADDED!
Haas #ST-28, 2-Axis CNC Lathe, 21" swing, 12" chuck, 4" bar, 40 HP, 3200 RPM, Haas CNC control, tailstock, 2024
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-28
Year: 2024
CNC Lathe in used condition. s include 21" swing, 2-axis, 12" chuck, 4" bar capacity, 40 hp, and max 3,200 RPM., 2024 HAAS ST-28, Swing. 21", # Axis. 2, Chuck Size. 12", Bar Capacity. 4", Power. 40 hp, Max RPM. 3,200 RPM, Tailstock. Yes, Control. CNC (HAAS).
JUST ADDED!
Haas #ST-28Y, multi-axis CNC turning center, Haas NextGen Control, 21" swing, 4" bar, 12" chuck, live tooling, 2025
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-28Y
Year: 2025
Haas ST28Y Multi-Axis CNC Turning Center (subject to buyer verification):CapacitiesMax Part Swing: 21.0 in 533 mmMax Cutting Diameter (with BMT65 turret) : 11.75 inMax Cutting Length (varies with workholding) : 22.5 inBar Capacity: 4.00 inTravelsX Axis: 9.40 inY Axis: ± 2.0 inZ Axis: 22.50 inSpindleSpindle ...more
JUST ADDED!
Haas #ST-30, CNC lathe, 21" swing, 32.5" centers, 10" chuck, 3" bar, tool presetter, chip conveyor, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-30
Year: 2014
2014 HAAS ST30, Swing. 21", Machining Length. 32.5", Max. Turning Diameter. 15", Distance Between Centers. 32.5", X-Axis. 9.4", Z-Axis. 32.5", Rapid Traverse X-Axis. 945 ipm, Rapid Traverse Z-Axis. 945 ipm, Spindle Taper. A2-6, Chuck Size. 10", Bar Capacity. 3", Spindle Bore. 3.5 in, Spindle Nose. A2-6, Power. 30 hp ...more
Haas #ST-30, CNC lathe, 21" swing, 10" chuck, 3-jaw, 3" bar, 32.5" centers, 21" dia., 26" lgth, 30 HP, 3400 RPM, dual Steady Rest, tool presetter, tailstock, 2020
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-30
Year: 2020
2020 Haas ST30 CNC Lathe - Excellent Condition, low hours!, 10" Hydraulic Chuck, 21" Swing, 32.5" Centers, 3" Bar Cap, Programmable Hydraulic Tailstock, Dual Steady Rest, Tool Presetter, Haas ST-30 Lathe, w/ Dual Steady Rest, Tool Presetter, & Tailstock, New: 2020, Excellent Condition Low Hours, Clean and Loaded ...more
JUST ADDED!
Haas #ST-30, CNC Lathe, 2-Axis, 21" Swing, 32.5" Machining length, 10" Chuck, 3" Bar, 21" Turning diameter, 30 HP, 3400 RPM, 12-Station Turret, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2020
2020 HAAS ST-30 CNC Lathe. s 21" swing, 32.5" machining length, 10" chuck, 30 hp, 3,400 RPM, and 12-station BOT turret. dual steady rest, automatic tool pre-setter, programmable tailstock, HAAS Connect, and chip conveyor., 2020 HAAS ST-30, Swing. 21", Machining Length. 32.5", # Axis. 2, Chuck Size. 10", Bar Capacity. ...more
Haas #ST-30, CNC Turning Center, 21" Swing, 32.5" Centers, 3" Bar, 15"/13.75" diameter x 32.5" L Cut capacity, 30 HP, 3400 RPM, 12-Position Turret, 2018
Prestige Equipment Corp | Melville, NY
Category: CNC Lathes and Turning Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Haas
Model: ST-30
Year: 2018
CAPACITIES:, Maximum Part Swing: 21.0", Maximum Cutting Dia. w/BOT Turret: 15.0", Maximum Cutting Dia. w/BMT65 Turret: 13.75", Maximum Cutting Length: 32.5", Distance Between Centers: 32.5", Bar Capacity: 3.0", X-Axis Travel: 9.40", Z-Axis Travel: 32.5", Rapids, X & Z Axes: 945 IPM, Spindle Speed, Maximum: 3400 ...more
JUST ADDED!
Haas #ST-30, CNC turning center, 21" swing, 3" bar, 15" dia., 32.5" lgth, 12 turret, A2-6, 3200 RPM, 30 HP, rigid tap, 2014
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-30
Year: 2014
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 12 Station Automatic Turret ...more
JUST ADDED!
Haas #ST-30, CNC Turning Center, 21.8" swing, 21" diameter x 26" L max, 3" bar, Live Mill, 3.5" bore, 30 HP, 12 Station Turret, 3400 RPM, tailstock, Chip Conv., Tool Preset, Bar Feed, 2011
Machinesused.com | Minneapolis, MN
Category: CNC Lathes and Turning Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: ST-30
Year: 2011
Used Haas ST-30 CNC lathe with live milling and bar feed. High-torque turning, multitasking capability, and proven reliability for production machining environments., Control:: Haas CNC Control w/ Coldfire Processor, Chuck Size:: 10", Swing Over Bed:: 31.75", Swing Over Saddle:: 20.75", Max Turning Diameter:: 21", Max ...more
Haas #ST-30, CNC turning center, 31" swing, 10" chuck, 3" bar, 21" diameter, 26" length, A2-6, 12 turret, rigid tap, tailstock, 2014
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-30
Year: 2014
Haas ST-30 CNC Lathe, Haas ST-30 CNC Turning Center, New: 2014, Bar Capacity: 3.0", Chuck Size: 10", Spindle Speed: 3400 RPM, Spindle Motor: 30 HP, X-Axis Travel: 12.5", Z-Axis Travel: 26", Rapid Rates: 945 IPM, Turret: 12 Station, Max Turning Dia: 21", Max Turning Length: 26", Max Swing: 31", Spindle Nose: A2-6, Haas ...more
JUST ADDED!
Haas #ST-30, CNC turning center, 31" swing, 21" turning diameter, 26" turning length, 12 station turret, collet chuck, 3400 RPM, programmbale hydraulic tailstock, automatic door, 2020
Perfection Industrial Sales | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Industrial Sales
Location: Columbus, OH
Mfr: Haas
Model: ST-30
Year: 2020
Haas ST-30, 21" Max Turning Dia, 26" Max Turning Length, 31" Max Swing, 12.5"X, 26"Z, 12-Station Turret, Collet Chuck, 3400 RPM, Approx. 3,064 Spindle Hours, Programmable Hydraulic Tailstock, Automatic Door, Chip Conveyor, High Pressure Coolant System, Haas Control, 2020.
JUST ADDED!
Haas #ST-30, CNC turning center, 31" swing, 21" turning diameter, 26" turning length, 12 station turret, Royal Master QG-80 collet chuck, 3400 RPM, programmbale hydraulic tailstock, automatic door, 2020
Perfection Industrial Sales | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Industrial Sales
Location: Columbus, OH
Mfr: Haas
Model: ST-30
Year: 2020
Haas ST-30, 21" Max Turning Dia, 26" Max Turning Length, 31" Max Swing, 12.5"X, 26"Z, 12-Station Turret, ROYAL Master QG-80 Collet Chuck, 3400 RPM, Programmable Hydraulic Tailstock, Automatic Door, Chip Conveyor, High Pressure Coolant System, Haas Control, Approx. 2,982 Spindle Hours, 2020.
Haas #ST-30, CNC Lathe, 10" Chuck, 3" Bar Capacity, 31.5" Swing, 3400 RPM, 26" Turning diameter, Haas CNC Control, 2012
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Haas
Model: ST-30
Year: 2012
31.5” X 26” CNC Lathe with Haas CNC Control, Automatic Tool Presetter, Bolt-On Style Turret, Belt-Type Chip Conveyor and Rigid Tapping., Chuck Size: 10”, Bar Capacity: 3.0”, Swing: 31.5”, Turning Diameter: 26”, Spindle Speed: 3400 RPM, Center Distance: 26”, Turret: 12 ...more
JUST ADDED!
Haas #ST-30, 2-Axis CNC Lathe, 31.7" swing, 21" turning diameter, 26" machining length, 10" chuck, 3" bar, 30 HP, 3400 RPM, tailstock, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2018
Used CNC Lathe, used but in good condition. s include 31.75" swing, 26" machining length, 10" chuck size, 3" bar capacity, 30 hp power, max RPM of 3,400, 21" turning diameter, and a tailstock., 2018 HAAS ST-30, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. ...more
Haas #ST-30, 2-Axis CNC Lathe, 31.7" swing, 21" turning diameter, 26" machining length, 10" chuck, 3" bar, 30 HP, 3400 RPM, tailstock, 2010
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2010
CNC lathe in used condition. s a 31.75" swing, 26" machining length, 10" chuck, and 30 hp power. Operating at 3400 RPM, it includes a hydraulic chuck, chip conveyor, tool pre-setter, and coolant system. Tailstock and 2-axis design included., 2010 HAAS ST-30, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. ...more
JUST ADDED!
Haas #ST-30, CNC Lathe, 21" turning diameter, 26" machining length, 31.7" swing, 10" chuck, 30 HP, 3400 RPM, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2014
2014 HAAS ST-30, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM, Turning Dia. 21", Tailstock. Yes, Live Tooling. No, Control. CNC (HAAS), Machine does not come with collet system. Comes with a 10" chuck..
JUST ADDED!
Haas #ST-30, CNC Lathe, 31.8" Swing, 32.5" Centers, 26" Machining length, 10" Chuck, 3" Bar, 21" Turning diameter, 30 HP, 3400 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2011
Used CNC Lathe for sale. s: 31.75" swing, 26" machining length, 10" chuck, 3" bar capacity, 30 hp, 3,400 RPM max, 21" turning diameter, live tooling, tailstock, bar feeder, tool setter, and chip conveyor. 284 spindle hours., Distance Between Centers 32.5", # of Turrets 1, Hole Thru 3.5 in.
JUST ADDED!
Haas #ST-30, CNC Lathe, 31.8" Swing, 26" Machining length, 10" Chuck, 3" Bar, 21" Turning diameter, 30 HP, 3400 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2011
Used CNC Lathe featuring a 31.75" swing, 26" machining length, and 21" turning diameter. a 10" chuck, 3" bar capacity, 30 hp power, and max RPM of 3,400., 2011 HAAS ST-30, Swing. 31.75", Machining Length. 26", Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM, Turning Dia. 21", Control. CNC (HAAS).
JUST ADDED!
Haas #ST-30, CNC Lathe, 2-Axis, 31.8" Swing, 26" Machining length, 10" Chuck, 3" Bar, 21" Turning diameter, 30 HP, 3400 RPM, 2021
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30
Year: 2021
Used CNC Lathe, used. s: 31.75" swing, 26" machining length, 2-axis, 10" chuck, 3" bar capacity, 30 hp power, max 3,400 RPM, 21" turning diameter., 2021 HAAS ST-30, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM, Turning Dia. 21", Control. CNC (HAAS).
Haas #ST-30M, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 32.5" centers, 21" dia., 26" lgth, 3400 RPM, 30 HP, tailstock, live tooling, 2011
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-30M
Year: 2011
The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability., 2011 HAAS ST-30, Bar Feeder, Live Tool Holders, Tail Stock, Tool Setter, Chip Conveyor, Shows 284 Spindle hours, Swing. 31.75", Machining Length. 26", # ...more
JUST ADDED!
Haas #ST-30SS, CNC Lathe, 2-Axis, 31.7" Swing, 26" Machining length, 10" Chuck, 3" Bar, 16" Turning diameter, 30 HP, 6000 RPM, 2016
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30SS
Year: 2016
Used CNC Lathe featuring a 31.75" swing, 26" machining length, and 30 hp power. HAAS CNC control, C-axis live tooling, hydraulic tailstock, and high-pressure coolant., Spindle Nose A2-6, Spindle Bore 3.5", Tools 24, Milling Speed 6000 RPM, Rapid Traverse Rates (X & Y / Z) 472 / 1200 IPM, X-Axis Travel 12.5" ...more
Haas #ST-30SSY, CNC Lathe, 31.7" swing, 16" turning diameter, 23" machining length, 10" chuck, 3" bar, 30 HP, 4300 RPM, live tooling, mist collector, 2016
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-30SSY
Year: 2016
CNC Lathe, used. s a 31.75" swing, 23" machining length, 10" chuck, 30 hp power, and 4,500 RPM. Includes parts catcher, tool setter, and mist collector. live tooling and a belt-style chip conveyor., 2016 HAAS ST-30SSY, Swing. 31.75", Machining Length. 23", Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. ...more
JUST ADDED!
Haas #ST-30SSY, CNC Turning Center, 12.5" X, 26" Z, 23" turning length, 18" turning diameter, 31.7" max. swing, 10" chuck, 30 HP, 4800 RPM, 12-station live tooling, 220 Volt, 2013
Naab Sales Corporation | Blaine, MN
Category: CNC Lathes and Turning Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Haas
Model: ST-30SSY
Year: 2013
Here We Have:, Haas ST-30SSY CNC Turning Center W/ Live Tooling Y Axis, Make: Haas, Model: ST-30SSY, Serial Number: 3095856, New in: 2013, Bar Capacity: 3″, Chuck Size: 10″, Spindle Speed: 4800 RPM, Spindle Motor: 30 HP, X Axis Travel: 12.5″, Z Axis Travel: 26″, Turret Tools: 24 Station, Rapid ...more
JUST ADDED!
Haas #ST-30Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 18" dia., 23" lgth, 5-Axis, sub spindle, live tool, 2023
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-30Y
Year: 2023
The Haas ST-30Y is a high-performance Y-axis CNC turning center designed for medium-sized parts, offering enhanced capabilities for milling, drilling, and tapping. It s a 30 hp vector drive spindle, 10" chuck (3.0" bar capacity), and a 12-station BMT65 turret, offering exceptional value for versatile "done-in-one" ...more
JUST ADDED!
Haas #ST-30Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 18" dia., 23" lgth, A2-6, 12 turret, Y-Axis, tailstock, 2019
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: ST-30Y
Year: 2019
Y-Axis| 4 Live Tools| Low Hours, This Haas ST-30Y 2019 CNC Lathe is a high-performance turning center built for done-in-one machining. It combines turning, milling, drilling, and tapping for complex part production in a single setup. Ideal for automotive, aerospace, and industrial manufacturing, it supports ...more
JUST ADDED!
Haas #ST-30Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 18" dia., 23" lgth, A2-6, 12 turret, Y-Axis, tailstock, 2019
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: ST-30Y
Year: 2019
This Haas ST-30Y 2019 CNC Lathe is a high-performance turning center built for done-in-one machining. It combines turning, milling, drilling, and tapping for complex part production in a single setup. Ideal for automotive, aerospace, and industrial manufacturing, it supports high-volume automated production ...more
JUST ADDED!
Haas #ST-35, CNC Lathe, 2-Axis, 31.7" Swing, 26" Machining length, 12" Chuck, 4" Bar, 21" Turning diameter, 40 HP, 3200 RPM, 12-Positon Turret, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-35
Year: 2014
Used CNC Lathe s 31.75" swing, 26" machining length, and 40 hp power. Haas CNC Control, 15" hydraulic chuck, 12-position turret, programmable tailstock, and chip conveyor., 2014 HAAS ST-35, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 12", Bar Capacity. 4", Power. 40 hp, Max RPM. 3,200 RPM, Turning ...more
JUST ADDED!
Haas #ST-35, CNC Lathe, 2-Axis, 31.7" Swing, 26" Machining length, 12" Chuck, 4" Bar, 21" Turning diameter, 40 HP, 2400 RPM, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-35
Year: 2017
2017 HAAS ST-35 CNC Lathe in used condition s a 31.75" swing, 26" machining length, 12" hydraulic chuck, and delivers 40 hp. Includes parts catcher, programmable tailstock, coolant system, and 2-speed gearbox., 2017 HAAS ST-35, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 12", Bar Capacity. 4", Power. ...more
JUST ADDED!
Haas #ST-35, CNC Lathe, 2-Axis, 31.8" Swing, 26" Machining length, 12" Chuck, 4" Bar, 21" Turning diameter, 40 HP, 3000 RPM, 2024
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-35
Year: 2024
CNC Lathe, used condition. s: 31.75" swing, 26" machining length, 2-axis, 12" chuck, 4" bar capacity, 40 hp, 3000 RPM. Includes Haas Mist Condenser, Auto Tool Presetter, Coolant Skimmer, Chip Conveyor., 2024 HAAS ST-35, Swing. 31.75", Machining Length. 26", # Axis. 2, Chuck Size. 12", Bar Capacity. 4", Power. 40 hp ...more
Haas #ST-35, 2" Axis CNC lathe turning center, 32" swing, 3-jaw 15" chuck, 4" bar, 2014
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: ST-35
Year: 2014
15" Haas ST-35 2-Axis CNC Lathe Turning Center, New 2014 15" 3-jaw chuck, 32" swing x 26" length, Swing 31.75", Machining Length 26", # Axis 2, X Travel 9.4", Z Travel 32.5", Chuck Size 15", Bar Capacity 4", Power 40 hp, Max RPM 3,200 RPM, Turning Dia 21", Tailstock yes, Dimensions 171x90x92, Weight 14300 lbs. ...more
JUST ADDED!
Haas #ST-35, CNC Lathe, 15" Chuck, 40 HP, 3200 RPM, 4" Bar, 12-Station Turret, Tailstock, 2014
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Prospect Heights, IL
Mfr: Haas
Model: ST-35
Year: 2014
THE 2014 HAAS ST-35 IS A 2-AXIS CNC LATHE TURNING CENTER DESIGNED FOR HEAVY-DUTY APPLICATIONS. IT S A 15-INCH 3-JAW CHUCK AND AN A2-8 SPINDLE NOSE, POWERED BY A 40 HP MOTOR PROVIDING A MAXIMUM SPEED OF 3,200 RPM AND 425 FT-LBF OF TORQUE AT 325 RPM. THE MACHINE OFFERS A 31.75-INCH SWING OVER THE FRONT APRON, A 21-INCH ...more
Haas #ST-35Y, CNC Lathe, 21" swing over carriage, 32.5" between centers, 4" bore, 40 HP, 220 Volts, 2022
Lenmark Industries | Langley, BC
Category: CNC Lathes and Turning Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Haas
Model: ST-35Y
Year: 2022
SKU: 151288, Model: ST-35Y, Year: 2022, Condition: Used, S/N: 3125979, Horsepower: 40 hp, Distance Between Centres: 32.5 ", Swing Over Carriage: 21 ", Bore Diameter: 4 ", Electrical :, Voltage: 220 volts, Phase: 3-phase, Dimensions: 92.00 (H) x 90.00 (W) x 171.00 (L) inches, Additional :, Date of ...more
JUST ADDED!
Haas #ST-35Y, CNC Lathe, 4-Axis, 31.8" Swing, 23" Machining length, 12" Chuck, 4" Bar, 18" Turning diameter, 40 HP, 3200 RPM, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-35Y
Year: 2020
Used CNC Lathe. s include 31.75" swing, 18" turning dia, 23" length, 12" chuck, 4-axis, 40 hp, 3,200 RPM, live tooling, C/Y-Axis, 4000 RPM turret, 1GB memory, Ethernet, HAAS Connect, and more., Distance Between Centers 23", Turret 12 Station.
JUST ADDED!
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 3-jaw, 4" bar, 44" centers, 12 turret, A2-8, 2400 RPM, 55 HP, chip conveyor, tailstock, 2021
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2021
Very Low Hours! Under Power!, Boost your production with this Haas ST40 Turning Center (2021), built for heavy-duty metal turning and large-part machining. Ideal for aerospace, automotive, and oil & gas industries, it delivers high-torque performance for efficient material removal and precision results. Perfect ...more
JUST ADDED!
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 4" bar, 44" centers, 12 turret, A2-8, 17" X, 44" Z, 2017, like new
KSM St Mary's Corp | Saint Marys, OH
Category: CNC Lathes and Turning Centers
Seller: KSM St Mary's Corp
Location: St.Marys, OH
Mfr: Haas
Model: ST-40
Year: 2017
Used 2017 Haas ST-40 with only 3573:09:09 hours of runtime., Max swing: 34.5'', Max turning Diameter: 25.5", Center Distance: 44", Chuck Size: 15", Bar capacity: 4", X Axis travel: 17", Z Axis travel: 44", Rapid Traverse(x/y): 710 IPM, Spindle nose: A2-8, Spindle Speed: 2400 rpm, Spindle motor: 40 HP, Weight: 25500 ...more
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 4" bar, 44" centers, A2-8, 2400 RPM, 55 HP, 2021
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2021
Used Haas ST-40. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Haas CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today., Max ...more
Haas #ST-40, CNC Lathe, 34.5" Swing, 44" Centers, 15" Chuck, 4" Bar, 25.5" Turn diameter, 40 HP, 2400 RPM, 4200 hours, 2019
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2019
Used 2019 Haas ST-40. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Haas ST-40 or any of our machines., MACHINE, Max Swing: 34.5", Max Turn Diameter: 25.5", Center Distance: 44", Chuck Size: 15" ...more
Haas #ST-40, CNC Lathe, 34.5" Swing, 44" Centers, 15" Chuck, 4" Bar, 25.5" Turn diameter, 55 HP, 2400 RPM, 1200 hours, 2021
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2021
Used 2021 Haas ST-40. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Haas ST-40 or any of our machines., MACHINE, Max Swing: 34.5", Max Turn Diameter: 25.5", Center Distance: 44", Chuck Size: 15" ...more
Haas #ST-40, 34.5" swing, 15" chuck, 4" bar, 44" centers, A2-8, 2400 RPM, 40 HP, 2019
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2019
Used Haas ST-40. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Haas CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today., Max ...more
Haas #ST-40, CNC lathe, 34.5" swing, 4" bar, 15" chuck, Jorgensen belt type chip conveyor, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-40
Year: 2014
Haas ST40 Lathes CNC, size 15″ Chuck, Swing 34.5″, Turning Dia 25.5″, Machining Length 44.02″, Turret Stations: 12, Bar Capacity 4″, Power 55 hp, Max RPM 2,400 RPM, Chuck Size 15″, X Axis 17″, Z Axis 44″, Rapids on X 710 in/min, Rapids on Z 320 in/min, Haas CNC Control ...more
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 4" bar, 25.5" dia., 44" lgth, 40 HP, 2400 RPM, 2021
JYC Machinery | Aventura, FL
Category: CNC Lathes and Turning Centers
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Haas
Model: ST-40
Year: 2021
, LOW HOURS MACHINE, Options, Standard Program Memory, 1 GB, 2400-rpm Spindle …., 95-Gallon Coolant Tank., 12-Station Bolt-On Tool Turret Bolt-On Toolholder Kit, 1.25", 15" Hydraulic Chuck, A2-8., Early Power-Failure Detection Module., Ethernet Interface., Extended Tool Pocket., HaasConnect: Remote monitoring ...more
Haas #ST-40, CNC turning center, 34.5" swing, 15" chuck, 4" bar, 25.5" cutting diameter, 44" cutting length, 2017
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Haas
Model: ST-40
Year: 2017
25.5” X 44” CNC Turning Center with Haas CNC Control, 2-Speed Gearbox, Extra Performance Option (55 HP), 3-Jaw Byson Hydraulic Chuck, Programmable Tailstock, Tool Presetter, Chip Conveyor, Extended Tool Pocket, Remote Jog Handle, Rigid Tapping and USB Port., Max. Swing: 34.5”, Max. Cutting Diameter: ...more
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 4" bar, live tooling, 40 HP, 2400 RPM, 2013
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-40
Year: 2013
2013 HAAS ST-40, Swing. 34.5", Machining Length. 1,118 mm, Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 2,400 RPM, Tailstock. No, Live Tooling. Yes.
JUST ADDED!
Haas #ST-40, 2-Axis CNC Lathe, 35.5" swing, 30" turning diameter, 44" machining length, 15" chuck, 4" bar, 40 HP, 2400 RPM, 12-station turret, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-40
Year: 2012
Used CNC Lathe available. s 35.5" swing over bed, 30" max cutting diameter, and 44" length. Includes HAAS CNC control, 15" hydraulic chuck, 12-station turret, and more., SWING OVER BED 35.5", MAXIMUM CUTTING DIAMETER 30", MAXIMUM CUTTING LENGTH 44", SPINDLE SPEEDS 2,400 RPM, SPINDLE MOTOR 40 HP, X-AXIS TRAVEL 20" ...more
JUST ADDED!
Haas #ST-40, CNC Lathe, 35.5" Swing, 15" Chuck, 4" Bar, 30" diameter x 44" L Cutting Size, 55 HP, 2400 RPM, 12-Tool capacity, 2022
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-40
Year: 2022
Used CNC Lathe, Haas CNC control, 15" chuck, 55 HP spindle motor, 1 GB memory, and programmable servo tailstock. Dimensions: 216"x95"x110". Perfect for precision work with max cutting capabilities. Run time: 9,912 hrs., Chuck Size: 15, Max. Part Swing: 35.50, Max. Cutting Diameter: 30, Max. Cutting Length: 44, Bar ...more
JUST ADDED!
Haas #ST-40, CNC lathe, 35.5" swing, 15" chuck, 4" bar, programmable servo tailstock, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-40
Year: 2022
HAAS ST40 CNC Lathe, Chuck Size: 15″, Max. Part Swing: 35.50″, Max. Cutting Diameter: 30″, Max. Cutting Length: 44″, Bar Capacity: 4″, X-Axis: 20″, Z-Axis: 44″, Spindle Nose: A2-8, Spindle Motor: 55 HP, Spindle Bore: 4.62″, Tool Capacity: 12, Spindle Speed: 2,400 RPM ...more
Haas #ST-40, CNC turning center, 35.5" swing, 15" chuck, 3-jaw, 4" bar, 30" dia., 44" lgth, C-Axis, live tool, rigid tap, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-40
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 3,282 Hours Run Time ...more
Haas #ST-40, CNC Lathe, 35.5" swing, 30" diameter x 44" L max, 55 HP, 12 tool, 2400 RPM, 4.62" bore, 15" chuck, VPS, Chip Conv., tailstock, 9912 run hours, 2022
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2022
Make: Haas, Model: ST-40, Year: 2022, Machine Location: Illinois, Chuck Size: 15″, Max. Part Swing: 35.50″, Max. Cutting Diameter: 30″, Max. Cutting Length: 44″, Bar Capacity: 4″, X-Axis: 20″, Z-Axis: 44″, Spindle Nose: A2-8, Spindle Motor: 55 HP, Spindle Bore: 4.62″ ...more
JUST ADDED!
Haas #ST-40, CNC turning center, 35.5" swing, 18" chuck, 3-jaw, 7" bar, 30" dia., 44" lgth, 7.5" big bore, A2-8, 12 turret, rigid tap, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-40
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Replacement Cost Over $199,000 with Similar Options ...more
Haas #ST-40, Big Bore CNC Lathe, 18" Chuck, 30" max cutting diameter, 6.5" Bar, 7.5" Bore, 2400 RPM, 40 HP, SMW Autoblok, 2013
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: ST-40
Year: 2013
Make: Haas, Model: ST-40, Year: 2013, Machine Location: California, X-Axis Travel: 17″, Z-Axis Travel: 44″, Max Cutting Diameter: 30″, Max Cutting Length: 44″, Max Part Swing: 35.5″, Chuck Size: 18.5″ SMW Autoblok 470-191-3-BB-N, Chuck Bore: 7.5″, Bar Capacity: 6.5″ ...more
Haas #ST-40L, CNC lathe, 34.5" swing, 15" chuck, 4" bar, 25.5" dia., 80" lgth, 40 HP, 2400 RPM, tailstock, 2012
JYC Machinery | Aventura, FL
Category: CNC Lathes and Turning Centers
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Haas
Model: ST-40L
Year: 2012
, ar Capacity: 4", Spindle Speed: 2,400 RPM, Max Turning Length: 80", Max Swing: 34.5", Spindle Motor: 55 HP, Turret Tools: 12 Station, Rapid Rate X Axis: 710 IPM, Rapid Rate Z Axis: 320 IPM, X Axis Travel: 17", Z Axis Travel: 80", Chip Conveyor, Tailstock, Imperial Metric Swing 34.5" 876.3 mm Machining Length ...more
JUST ADDED!
Haas #ST-40L, CNC Lathe, 2020
iGAM | Detroit, MI
Category: CNC Lathes and Turning Centers
Seller: iGAM
Location: Detroit, MI
Mfr: Haas
Model: ST-40L
Year: 2020
This listing is for a 2020 Haas ST-40L CNC Lathe., Options included:, 12-state hydrid Bot/vdt tool turret, 4000-rpm live tooling with C Axis, 6000 Rpm speed upgrad for live tooling, Automatic tool pressetter, Chip conveyor, (4) HA40m-SK20X-ice - haas live VDi40 x-axis 90deg/sk20, (2) HA40m - Sk20Z-ice haas live Vdi40 ...more
JUST ADDED!
Haas #ST-40T, 2-Axis CNC Lathe, 34.5" swing, 25.5" turning diameter, 44" machining length, 15" chuck, 4" bar, 40 HP, 2400 RPM, tailstock, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-40T
Year: 2014
Used CNC Lathe: 34.5" swing, 44" machining length, 2-axis, 15" chuck, 4" bar capacity, 40 hp, max 2,400 RPM, 25.5" turning dia. Includes tailstock, chip conveyor, tool setter, remote jog handle, and 15" three jaw chuck., 2014 HAAS ST-40T, Swing. 34.5", Machining Length. 44", # Axis. 2, Chuck Size. 15", Bar Capacity. ...more
JUST ADDED!
Haas #ST-40T, CNC lathe, 34.5" swing, 15" chuck, 3-jaw, 4" bar, 25.5" dia., tailstock, chip conveyor, 2014
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-40T
Year: 2014
2014 Haas ST-40T CNC Lathe, model MM 7612389, used but operational. Max RPM 2400 with 40 hp power and 15" chuck. s a 34.5" swing, 44" machining length, and chip conveyor. tailstock, tool setter, and remote jog handle., 2014 HAAS ST-40T, Tail Stock, Chip Conveyor, Tool setter, Remote Jog Handle, 15" Three Jaw Chuck ...more
JUST ADDED!
Haas #ST-45, 2-Axis CNC Lathe, 34.5" swing, 25.5" turning diameter, 44" machining length, 18" chuck, 6.5" bar, 40 HP, 1400 RPM, high-pressure coolant, 2023
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: ST-45
Year: 2023
Used CNC Lathe with 18" 3-Jaw Samchully Hydraulic Chuck, HAAS NextGen Control, and 2-speed gearbox. 6.5" bar capacity, programmable tailstock, high-pressure coolant, and more. Feed cutting time: 465 hours; mostly cut carbon steel., MAX SWING 876.3 mm, MAX CUTTING DIAMETER 647.7 mm, MAX CUTTING LENGTH 1,117.6 mm ...more
JUST ADDED!
Haas #ST-45, lathe, 34.5" swing, 25.5" diameter x 44" L max, 18" chuck, 7" bore, 40 HP, 1400 RPM, 12 tool, NextGen Control, 1000 psi coolant, 6.5" Bar, Prog. Tlstk, Chip Conv., 450 cut hours, 2023
Clark Machinery Sales LLC | Hunt Valley, MD
Category: CNC Lathes and Turning Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Haas
Model: ST-45
Year: 2023
2023 HAAS ST-45, MAX SWING. 34.5", MAX CUTTING DIAMETER. 25.5", MAX CUTTING LENGTH. 44", X-AXIS TRAVEL. 17", Z-AXIS TRAVEL. 44", CHUCK SIZE. 18", BAR CAPACITY. 65", SPINDLE BORE. 7", SPINDLE NOSE. A2-11, SPINDLE MOTOR. 40 hp, SPINDLE SPEED. 1,400 RPM, RAPID TRAVERSE RATE X-AXIS. 710 in/min., RAPID TRAVERSE RATE ...more
JUST ADDED!
Haas #ST-45, CNC lathe, Haas NextGen Control, 34.5" swing, Samchully 3-jaw hydraulic 18" chuck, 6.5" bar, 2023
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-45
Year: 2023
HAAS ST45 CNC Lathe, MAX SWING 34.5″, MAX CUTTING DIAMETER 25.5″, MAX CUTTING LENGTH 44″, X-AXIS TRAVEL 17″, Z-AXIS TRAVEL 44″, CHUCK SIZE 18″, BAR CAPACITY 65″, SPINDLE BORE 7″, SPINDLE NOSE A2-11, SPINDLE MOTOR 40 hp, SPINDLE SPEED 1,400 RPM, RAPID TRAVERSE RATE X-AXIS ...more
Haas #ST-45, CNC lathe, 34.5" swing, 44" machining length, 25.5" turn diameter, 40 HP, 1400 RPM, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-45
Year: 2014
2014 HAAS ST-45, Swing. 34.5", Machining Length. 44", Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 1,400 RPM, Tailstock. No, Live Tooling. Yes, HAAS CNC Control, Chip Conveyor.
Haas #ST-45, CNC lathe, 34.5" swing, 44" machining length, 25.5" turning diameter, chip conveyor, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-45
Year: 2014
2014 HAAS ST-45, Swing. 34.5", Machining Length. 44", Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 1,400 RPM, Tailstock. No, Live Tooling. No, HAAS CNC Control, Chip Conveyor.
Haas #ST-45L, 20" chuck, 80" centers, 7" bore, steady rest, 2014
Sterling Machinery Ventures | Commerce Twp., MI
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Ventures
Location: Commerce Twp., MI
Mfr: Haas
Model: ST-45L
Year: 2014
HAAS ST-45L CNC TURNING CENTER, NEW: 2014, S/N 3098255, CATALOG :, SWING OVER APRON: 34.5", SWING OVER CROSS SLIDE: 25.5", MAXIMUM CUTTING LENGTH: 80", MAXIMUM CUTTING DIAMETER: 25.5", SPINDLE BORE: 7", HAAS CNC CONTROL, 20" 4-JAW CHUCK, HYDRAULIC STEADY REST, TAILSTOCK.
JUST ADDED!
Haas #ST-55, CNC lathe turning center, Haas NextGen Control, 34.5" swing, 12.5" bar, 26" pneumatic chucks, 2023
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: ST-55
Year: 2023
Haas ST55 CNC Lathe Turning Center, Control Haas Next Generation CNC Control, Max Swing Over Bed 34.5″, Max Swng Over Saddle 25.5″, Max Turning Diameter 25.5″, Max Turning Length 80″, Max Bar Capacity 12.5″, Hole Thru Spindle 12.5″, Spindle Nose A1-20 Front and Rear Headstock ...more
