1 - 50 of 98 listings
1 Spindle, Cam-wood #BR-25X, horizontal boring machine, single spindle, 2 HP - 3450 RPM, 3-phase, 5" horizontal spindle travel, 3" thickness, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-25X
Year: 2026
CAM-WOOD BR 25 Horizontal Drills & : -- Single Spindle, 2 HP - 3450 RPM 3-phase motor, adjustable vertically and front to back. -- 5" Horizontal spindle travel (drilling depth) w/foot pedal control. -- 3-1/2" Vertical table adjustment. -- Pneumatic hold-down clamp for up to 3" thickness. -- 12" x 10" Table size. ...more
2 Spindle, Doucet #Airbor-T-1000, Vertical Boring Machine, 12" width x 16" L Table, 1 diameter Spindles, 0.5" Spring Collet, 6" Vertical Travel, 2300 RPM, 1990
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Doucet
Model: AIRBOR T-1000
Year: 1990
DOUCET - Airbor T-1000: Vertical Boring Machine ● Main body: 12" Wide x 16" long hardwood table. ● 2-Spindle carriage: 6" Vertical travel. ● 1-1/2" Dia. spindles with: 1/2" Spring collet; (2) in total. ● 1 HP Drive group; air/oil feed; air-operated controls; foot control. ● Capacity per Drive ...more
1 Spindle, Kreg #DK-1100-FE, pocket hole boring machine, single spindle, 1.5 HP, 40" table top, 3/8" diameter step bit, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kreg
Model: DK-1100-FE
Year: 2026
Electric Single Spindle Pocket Drill. : -- Capacity: Materials from 1/2"- to 1 1/2"-thick. -- 1.5 HP direct drive electric motor (also available 1.5 HP direct drive pneumatic motor); 40" table top working height; 1 Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation. The bit is ...more
1 Spindle, Kreg #DK-1100-T, pocket hole boring machine, single spindle, 1.25 HP, 8-1/2" tabletop, 3/8" diameter step bit, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kreg
Model: DK-1100-T
Year: 2026
Pneumatic Single Spindle Tabletop continuous operation drill;: -- 1.25 HP direct drive pneumatic motor; 8" tabletop working height; 1 Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation; the bit is supported all the way to the workpiece by a hardened steel drill guide that ...more
1 Spindle, Sicotte #J-20-5, Horizontal Boring Machine, 12" x 60" Steel Table, 2" diameter Spindle w/0.5" Jacob Chuck, (3) 1 HP, 3500 RPM
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sicotte
Model: J 20-5
SICOTTE - J 20-5: Horizontal Boring Machine12" x 60" Steel table with: 2-1/2" Manual up-and-down adjustment. -- (3) Drive groups: with 1 HP - 3,500 RPM drive motor each; timing belt & pulley drive. -- (1) Spindles: 2" Dia. with: JACOBSCHUCK Chuck; 0 - 1/2" capacity. -- Spindle feed powered by: 3 HP Hydraulic pump; ...more
Get email updates for newly added Woodworking Boring Machines
Woodworking boring machines are built for drilling accurate, repeatable holes, perfect for cabinetry, furniture, and millwork. They come in single-spindle models for individual holes and multi-spindle versions to drill multiple holes in one go. Adjustable tables and pneumatic clamping add flexibility, making these machines versatile for different woodworking projects.
1 Spindle, Unique #71, Pocket Hole Boring Machine, produce screw holes w/unlimited spacing, push button Control, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unique
Model: 71
Year: 2026
UNIQUE 71 Pocket Hole Boring Machine -- The UNIQUE "71" is a Single Spindle Pocket Drill capable of producing screw holes with unlimited spacing. -- The heavy-duty industrial construction has proven to give years of service with minimal maintenance. -- Push button control. -- Brand New with Warranty!NOT IN STOCK - ...more
Ritter #R-220-T, Pocket Hole Boring Mach, 1 HP spindle, 1" spindle centers, 6100 RPM, 24" x 30" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Model: R-220-T
Year: 2026
RITTER R220T Double Spindle Counterbore Tub: -- 1.5 HP Spindle Drive Motor, TEFC. -- 1"; Spindle Centers. -- 14 Degree Double Spindle -- Manual Controls, 110 V, TEFC. -- Foot Actuated Boring Cycle. -- Tooling included. -- 14 Degree Double Spindle. -- 1"; Spindle Centers. -- 6,100 RPM Spindle Speed. -- Ball Bearing ...more
2 Spindle, Cemco #MVB-54, Vertical Boring Machine, 54" x 15" table, 2 universal spindles, (3) 2 HP-1725 RPM, 6" vertical stroke
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cemco
Model: MVB-54
CEMCO MBV 54 Vertical Boring Machine54" x 15" Cast iron table with wooden top,:(2) Universal spindles with movable spindle supports,(3) 2 HP - 1,725 RPM direct drive spindle motors,36" Stationary table height; 6" Max. vertical stroke, spindles advance hydraulically at 0 - 30 strokes/Min;Foot pedal actuated w/single ...more
2 Spindle, Sicotte #T-1050, Woodworking Horizontal Boring Machine, 12" x 16" wooden table, 2 diameter spindles, 1/2" capacity Jacobs chuck, 1 HP motor, 3450 RPM, 230 V.
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sicotte
Model: T 1050
SICOTTE - T 1050,.Horizontal Boring Machine 2-Spindle Horizontal Borer.: -- 1 HP Motor, timing belt drives with motor starter. -- (2) Horizontal spindles, 2" dia. with Jacobs® Chuck, 0 - 1/2" capacity, turning at 3,450 RPM.s: -- 4" Boring head stroke with air/oil system and adjustable feed speed. -- Spindle mount ...more
2 Spindle, Unique #73, Pocket Hole Boring Machine, produce screw holes w/unlimited spacing, push button Control, 2 drill w/ counter bore, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unique
Model: 73
Year: 2026
UNIQUE 73 Pocket Boring MachineThe UNIQUE "73" Drill Tub is a pocket drill capable of producing screw holes with unlimited spacing. -- Heavy-duty industrial construction has proven to give years of service with minimal maintenance. Push button control. -- Double spindle boring tub, 2 drills with counterbore.NOT IN ...more
2 Spindle, Woodtech #GH-2, horizontal boring machine, 1"-9" drill centers, 12" L x 24" W table
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Woodtech
Model: GH-2
, Model GH-2, 3 Hp, 230/460 volt three phase drive motor Belt drive to spindle arbor design, (2) Spindle drill head with adjustable centers, Min drill centers 1", Max drill centers 9", Spindle speed 3000 rpm, Machine weight 650 lbs, Vertical table adjustment 4", 24" wide x 12" long machine work table, Pneumatic stock ...more
3 Spindle, Kreg #DK-3100, pocket hole boring machine, 1.5 HP, 39-1/2" tabletop, 2-pocket hole, 3/8" diameter step bit, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kreg
Model: DK-3100
Year: 2026
KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation. Drill spindles in ...more
JUST ADDED!
4 spindle, A.e.s #FN-2450, boring machine, 4 head, 220 V. (2 available)
RT Machine | Hughesville, PA
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: A.e.s
Model: FN-2450
The FN 2450 is a 4 head hinge and handle slot drilling machine used for drilling 4 hinge holes, reference holes, and handle slots simultaneously on wooden materials with precise pneumatic motion. 4 cup bits, 35mm 8 screw reference bits, 2mm 2 bits for handle slots 4 pneumatic vertical clamps Airgun Electrical: 220V ...more
1 Spindle, Cam-wood #BR-50X, horizontal boring machine, 3 HP, 0" - 4 spindle stroke, 7/16" - 14-thread screw shank, 1/2" max bit capacity, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-50X
Year: 2026
CAM-WOOD BR-50 Universal Boring Machines & : -- 3 HP Pneumatic Universal Boring Machine, all adjustments an index plate for accurate and convenient reading, workplace clamping. -- Vertical Base travel, 24". Horizontal Base travel 12". -- 0" - 4" Spindle stroke, 7/16" - 14-thread screw shank, 1/2" max. bit ...more
5 Spindle, J & P Machines #6V2HD2GC, Boring-Feed Through Machine, 100 PSI, 32 mm centers, PLC Control, 2 HP, 3600 RPM Motors
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: J & P Machines
Model: 6V2HD2GC
Year: 2020
J & P MACHINES 6V2HD2GC BORING MACH. (FEED THRU, DRAWER PARTS) -- Drawer part Boring Machine is ideal for small to medium size production: Drills approx. 15 parts/minute; 12" min. working length; 28" max. working length; 2" min. working width; 28" max. working width; hopper loading/belt feeding magazine for ...more
5 Spindle, Sicotte #J-3-H-7, Vertical Boring Machine, 24" x 84" table, (5) 1.5 HP, 1.5" diameter, 8" table feed, foot pedal actuation
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sicotte
Model: J 3 H-7
SICOTTE - J 3H-7,.Vertical Boring Machine24" x 84" Table size. : -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring collet 1/2" capacity. -- (2) Spring loaded holddowns.s: -- 0" - 8" Vertical table feed, hydraulically operated; variable feed and ...more
Safety Speed Mfg #SPM-301HD, Pocket Hole Boring Mach, 5 amp/18000 RPM spindle, 3/8" ER20 Collet, 0.7 HP - 25000 RPM, 1/4" collet, 220 CFM vacuum, 30CFM 80 psi, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Model: SPM-301HD
Year: 2026
SAFETY SPEED SPM-301HD Screw Pocket MachineThe SPM-301HD showcases an all-new heavy-duty, direct drive continuous electric spindle motor for those jobs that just keep on coming.Just like your CNC spindle, this motor runs continuously with little maintenance required.Unlike others of its kind, the SPM-301HD s the ...more
JUST ADDED!
6 Spindle, Hettich #BlueMax-Mini-Type3, 2.05" x 0.217" hinge cup drilling, 2.15 HP, pneumatic stroke, 230 Volt, 1PH, 2018
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Boring Machines
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Hettich
Model: BLUEMAX-MINI-TYPE3
Year: 2018
*REDUCED PRICE* Hettich BlueMax Mini, type 3, 1.6 kW / 230 V / 60 Hz / 1 phase. New, in box. Available.Compare at @ over $7,000 CA$. See Hettich website listing <here>.
6 Spindle, Northtech #NT-HBSS280, Horizontal Boring Machine, 2 HP, 1/2" chuck, 4200 RPM, 5-1/2" stroke, new
RT Machine | Hughesville, PA
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-HBSS280
Northtech Model NT-HBSS280 Horizontal Boring Machine The NT-HBSS280 is a heavy duty horizontal boring machine. The multiple boring head configuration is adjustable for varying hole layout for customer flexibility. Rugged cast iron base for a solid footing and decades of performance. Pneumatic hold downs and drill ...more
JUST ADDED!
7 Spindle, Maggi #GT-800, CNC boring and grooving machine, 31.5" Y capacity, 3400 RPM, 12" touch screen, 220 V., 3-phase, 2022
ACT Machinery | Fullerton, CA
Category: Woodworking Boring Machines
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Maggi
Model: GT-800
Year: 2022
, Type of CNC Control, Touch Screen 12" with USB Port, Maximum Panel Dimension, Max. panel dims: Y - 800 mm (31.5"), X - Unlimited, Z - 50 mm (2"), Minimum Panel Dimensions, Min. panel dims: Y - 100 mm (3.93"), X - 250 mm (9.84"), Z - 10 mm, Vertical Spindles, (7) Vertical spindles (4 in X ...more
8 Spindle, Maggi #GT800, CNC Boring & Grooving Center, 8 RPM spindles, 31.5" boring, 220 V., 3 phase, 12" touch screen, 2022
iBid Machinery | Roswell, GA
Category: Woodworking Boring Machines
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Maggi
Model: GT800
Year: 2022
Product : Used 2022 Maggi GT800 CNC Boring and Grooving Center located in California, Machine Location State: North Carolina, Machine Location City: Lincolnton, Year: 2022, Make: Maggi, Model: GT800, Serial No: 1732100001, Phase/Voltage: 3 PH/ 220 V, Condition: Like New, Any Known Issues: None - Like New, In ...more
11 Spindle, Homag Weeke #BST500, CNC Boring Machine, 2000
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Homag Weeke
Model: BST500
Year: 2000
Homag BST 500.
12 Spindle, Novy #1872V, Multi Spindle Vertical Boring Machine, 18" x 72' Table Hardwood, 0"-6" table stroke, 5" center to center, 0"-1/2" chuck, (2) 2 HP motor
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Novy
Model: 1872V
NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machine: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard ...more
13 Spindle, King Canada #KC-1300BM, Line Boring Machine, 0.375" Collet, 1.25" Spindle Centers, 2.5" depth of stroke, 5.5" stock thickness, 31.5" x 15.75" Table, 3500 RPM, 1.5 HP, 110 V
Lenmark Industries | Langley, BC
Category: Woodworking Boring Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: King Canada
Model: KC-1300BM
SKU: 60921, Model: KC-1300BM, Condition: New, Horsepower: 1.5 hp, # of Spindles: 13, Made In: TAIWAN, Dimensions: 67.00 (H) x 28.50 (W) x 76.00 (L) inches, Additional :, Collet Size: 3/8" (10 mm), Spindle Centres: 32 mm (1-1/4"), Spindle Speed: 3,500 RPM, Table Size: 31-1/2" x 15-3/4", Maximum ...more
14 Spindle, Cemco #SCB-120, Multi Spindle Boring Machine, 4"-10" stroke adjustable, 1991
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cemco
Model: SCB-120
Year: 1991
(14) spindles with 1-1/2 hp motors on each. On/off switch for each motor., chucks adjust to grip up to 1/2” bit, stroke adjustable from 4” to 10”, 121” x 39-1/2” table with (4) hold downs, Adjustable speed hydraulic feed, 230 volt 3 phase.
14 Spindle, Cemco Drill Press, 1.5 HP 1800 RPM, 121" x 30.5" Table, (4) Spring loaded hold downs
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cemco
Cemco SVB 120 Boring Machine, 113" x 22" Boring area, (14) 1.5 HP 1800 RPM motors driving (14) spindles, 121" x 30.5" Table size, (4) Spring loaded hold downs.
19 Spindle, Holz-Her #1619, Boring Machine, 2800 RPM, 2 HP, 19-1/2" x 38" Table, 220 V., 1986
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: 1619
Year: 1986
HOLZ-HER - 1619,.Boring Machine (Construction & Line Boring) -- :(19) Spindles on 32 mm centers; bores vertically from top and horizontally from the rear; repositions via manual air shock assisted tilting.2 HP Motor with: 2,800 RPM Gear driven boring head. -- s:4-Position turret style depth stop for boring depth ...more
21 Spindle, Cam-wood #BR-0042BX, 2-head line boring machine, 5-1/2" - 23-1/2" between rows, 3" max drilling depth, (2) 2 HP - 3400 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-0042BX
Year: 2026
CAM-WOOD BR-OO42BX DOUBLE ROW LINE BORERHeavy Double Head Line Borer with (2) 21-spindle heads; 32 mm spindle spacing.: -- Drilling from the bottom up and with 5-1/2" - 23-1/2" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up ...more
21 Spindle, Cam-wood #BR-2132X, construction/line boring machine, 0" - 3" adjustable drilling depth, 2 HP - 3400 RPM, 37-1/2" x 31-1/2" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-2132X
Year: 2026
CAM-WOOD BR-2132 Boring Machine21-Spindle boring head on 32 mm centers with position indicator.s & : -- Stops in 0 & 90 with pneumatically assisted positioning in vertical & horizontal. -- 0" - 3" Adjustable drilling depth with speed control. -- Head height fine adjustment with mechanical digital readout. ...more
21 Spindle, Cantek #HS-21T, line boring multi drilling machne, 32mm between center, 3" drilling depth
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Boring Machines
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Cantek
Model: HS-21T
Cantek HS-21T Used Line Boring Multi Drilling Machine. 2.5 HPFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
21 Spindle, Cantek #JB21P, line boring machine, pneumatic stroke, 2 HP, 2021
Lenmark Industries | Langley, BC
Category: Woodworking Boring Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cantek
Model: JB21P
Year: 2021
SKU: 139796, Model: JB21P, Year: 2021, Condition: Used, S/N: 21011019, Horsepower: 2 hp, # of Spindles: 21, Distance Between Spindles: 1.26", Electrical :, Voltage: 230 volts, Phase: Single-phase, Dimensions: 69.00 (H) x 33.00 (W) x 43.00 (L) inches, Additional :, Table size: 43 5/16" x 15 3/4", Table ...more
21 Spindle, Maggi #System-21, Boring Machine, 32mm centers, 2014
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Maggi
Model: SYSTEM-21
Year: 2014
Maggi System 21 Boring Machine, Manufacturer′s, Construction/Line Borer Adjustable 21-spindle boring head; 32 mm centers with position indicator.: -- Stops in 0° & 90° with: Pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with: Patented setting device. -- ...more
21 Spindle, Maggi #System-21-Prestige, construction/line boring machine, 0" - 2-1/2" adjustable drilling depth, 2 HP - 2800 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Maggi
Model: SYSTEM-21-PRESTIGE
Year: 2026
MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.: -- Stops in 0 and 90 with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with ...more
21 Spindle, Maggi #System-21-Prestige, construction / line boring, 21 spindle boring head, 32mm centers w/ ppostition indicator, 2016
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Maggi
Model: SYSTEM-21-PRESTIGE
Year: 2016
MAGGI - System 21 Prestige: Construction/Line Borer Adjustable 21-spindle boring head on: 32 mm Centers with position indicator. -- Stops in 0 & 90 with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with: Patented setting device. -- (2) Patented material clamps with: ...more
21 Spindle, Mesa #M21, Boring Machine, 32 mm Centers, 2.75" drill depth, 31.5" max Work width, 34" x 20" table, 2 HP, 2800 RPM, 1999
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mesa
Model: M21
Year: 1999
ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed ...more
21 Spindle, Vitap #ALFA-21, construction/line boring machine, 2-3/4" max drilling depth, 2.5 HP - 2800 RPM, 34" x 20" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Vitap
Model: ALFA-21
Year: 2026
VITAP ALFA 21 CONSTRUCTION/LINE BORER21-Spindle boring head on 32 mm centers. -- : drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed ...more
21 Spindle, Vitap #LINEA-42, 2-Head Line Boring Mach., 2 HP, 3000mm L x 950mm width Drills panels, 1992
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Vitap
Model: LINEA 42
Year: 1992
VITAP LINEA 42 Line Boring System: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks ...more
Weeke #BST-500, Automatic Boring Machine, TOPDRILL-BST-500 Control, 21 spindle
RT Machine | Hughesville, PA
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Model: BST-500
Numerical Control Type: Power Control Software: TOPDRILL BST 500 Two through-feed motorized conveyor belts Two horizontal drilling units/supports (with Digital quota/axes display) One drilling head for each horizontal unit (1 x Kw 1.5) 21 spindles for each horizontal drilling head Max. Working Width: 2500mm Min. ...more
23 Spindle, Conquest #1-23H, Vertical/Horizontal Boring Mach., 2 HP, 3450 RPM, Pnuematic holddowns & foot pedal, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Conquest
Model: 1-23H
Year: 2005
CONQUEST 1-23H Horizontal 32 mm Boring Machine;: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- : Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit ...more
23 Spindle, Gannomat #COMBI-110, Constr. & Line Boring Mach., (23) Spindle Hd., 2 HP, 31-1/2" width, 3" drilling stroke, 1985
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: COMBI 110
Year: 1985
GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45 for angle drilling. -- Holddown clamp assembly tilts 90 for ...more
23 Spindle, Gomad #WW23, Construction & Line Boring Machine, 1.26" spindle centers, 1989
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gomad
Model: WW 23
Year: 1989
GOMAD WW 23 23-Spindle Construction & Line Boring Machine: -- Bores vertically from bottom & horizontally from rear. -- Spindle centers 32 mm (1.26").: -- (3) Pneumatic hold-down clamps. -- Foot pedal control.
23 Spindle, Interwood #B3223, Boring Machine, (2) 1.5kw, 220/380v, 3ph motors, (2) banks of (23) drills, 32mm drill spacing, (8) spring hold downs, 1987
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Interwood
Model: B3223
Year: 1987
Interwood B3223 Boring Machine, 23-Spindles, Manufacturer (to be confirmed):, (2) 1.5kw, 220/380v, 3ph motors, (2) banks of (23) drills, 32mm drill spacing, (8) spring hold downs, (2) pneumatic locators, 50-1/2 inch x 30 inch table, Pneumatic operation / foot pedal.
23 Spindle, Laguna #BM23E-2, 2-Head Line Boring Mach., (2) 3 HP, 2800 RPM, 2006
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Laguna
Model: BM23E-2
Year: 2006
LAGUNA BM23E-2. Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the ...more
46 Spindle, Maggi #System-46, Double Row Line Boring Machine, 2 rows of 23 spindles, 1.5 HP, 2800 RPM, 4" stroke, 230 V, 60 Hz, 3-Ph., 2024
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Maggi
Model: SYSTEM 46
Year: 2024
MAGGI - SYSTEM 46: Double Row Line Borer(2) 23-Spindle heads on 32 mm centers; drills from bottom up. -- (2) 1-1/2 HP - 2,800 RPM motors; 5" min. & 25-19/32" max. working width between heads; 4" drilling stroke; drills vertically from bottom so chips fall out of holes. -- Heavy overhead material holddown system ...more
23 Spindle, Maggi #SYSTEM-23, construction/line boring machine, 0" - 2-1/2" adjustable drilling depth, 2 HP - 2800 RPM, 38" x 16" table 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Maggi
Model: SYSTEM-23
Year: 2026
MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centers: -- Stops in 0 & 90 with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety. -- ...more
23 Spindle, Maggi #System-23, construction line borer, 38" x 16" table, 2 HP, 2-1/2" drilling stroke, 2011
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Maggi
Model: SYSTEM-23
Year: 2011
MAGGI SYSTEM 23 Construction Line BorerConstruction Boring Machine that drills vertically from bottom and horizontally from rear.: -- 23-Spindle head on 32 mm centers. -- Table size: 38" x 16". -- Max. working width: 25". -- Drilling stroke: 2-1/2". -- Main motor: 2 HP. -- Adjustable drilling depth with patented ...more
23 Spindle, Ritter #R-123, Single-Row Line Boring Machine, w/60" Back Fence, 32 mm Between Spindles, 13" Throat depth, 230 V, 1994, 1994
Equipment Hub | Decatur, GA
Category: Woodworking Boring Machines
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Ritter
Model: R-123
Year: 1994
Stock #: 190250056, Location: Decatur, GA, Brand: Ritter, Model: R-123, Serial #: 280, Year: 1994, Approx. Shipping Weight: 450 Lbs., Approx. Shipping Dimensions: 6' L x 4' W x 7' H, Skidding Fee: $150, Number of Spindles: 23, Distance Between Spindles: 32MM, Throat Depth: 13", Electrical: 230V / 3PH ...more
23 Spindle, Ritter #R-46VH, construction boring machine, 3 HP, 6 fence/4 table stops, 1994
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ritter
Model: R-46VH
Year: 1994
This machine has been cleaned, repaired and checked over, ready for a new home!, (2) 3HP motors, 460V, 3Ph, 6 pneumatic stops for use in horizontal or vertical drilling, 72" precision machined back fence, 6 fence stops, 4 table stops, (2) 23-spindle drilling heads, one horizontal, one vertical, 3-position turret dept ...more
25 Spindle, Detel #M2H, 2 Head Boring Machine
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Detel
Model: M2H
Detel M-2H Boring Machine, (2) 25-Spindle Boring Heads.
25 Spindle, Gannomat #Mentor-25, boring mach, 34.4" through feed width, pneumatic holddown clamps, 1999
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: MENTOR-25
Year: 1999
GANNOMAT MENTOR 25 Construction & Line Hole Boring Machine --25-SpindleConstruction hole and Line hole32 mm Boring Machine. --: -- 2 HP - 3,400 Motor, 31" (768 mm) max. working width up to 34.4" (900 mm) through feed width. -- Adjustable drilling stroke up to 3-7/8", line drilling up to 11-3/4" from edge. -- ...more
