5 Results
horizontal machining center #2-Saw, Lumber Trimmer, Left-hand, push button setworks, 16' length capacity, 8" thick cut capacity
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hmc
Model: 2-SAW
HMC 2-Saw Trimmer Model ET-10,;Complete with the following s: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
HMC #AC44, Sawmill, 36 inch diameter blade, 1985
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: AC44
Year: 1985
HMC Corporation Sawmill, Has a 36 inch diameter blade.
HMC #HD-40, Carriage
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: HD-40
HMC Model HD-40 Carriage Drive, 50 HP Hydraulic Unit.
horizontal machining center Sawmill
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
This mill is ready to be removed from the current location., - 4 Roll Cases 24″ 2 center 6.5 Diameter 45′ 56′ 62′ 70′HMC All motor controls included, - 7 Lumber Decks Flat Chains 10′ 12′ 16′ 20′ 24′ 40′ 82′ 5 Chains WIDC All motor controls ...more
horizontal machining center 3 Head Block Carriage, 5x10 Cab with controls
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
HMC Carriage, 5x10 Cab with controls, System is already removed from service and ready to load., Notes from seller:, Carriage is 17'1" longKnee spacing is 63" from 1 to 2, 78" from 2 to 3, 1 to 3 is 141 1/4", Carriage frame is 76 1/2 " wide, Track centers are 62", Track rails are worn out. We used the old track ...more
Get email updates for newly added Sawmills
Wood sawmills are designed for efficient log processing and timber cutting, perfect for lumber production and custom milling tasks. They include models like canter sawmills for initial log breakdown, band resaws for detailed board cuts, and scragg mills for high-speed multi-cut operations.
