1 - 50 of 87 listings
Featured
Wood-Mizer #TVS15-USA, Vertical Scragg Mill, 2 bandsaws, 2014, (2 available)
Machinery Scene | Toledo, WA
Category: Sawmills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Wood-Mizer
Model: TVS15-USA
Year: 2014
2 SCRAGG SYSTEMS AVAILABLE, USED INSIDE OF BUILDING AND CURRENTLY OPERATING, INFEED AND OUT-FEED AVAILABLE., TVSEC15-USA, YEAR:2014, ADDITIONAL PHOTOS AND INFORMATION AVAILABLE, PRICE INCLUDES DISMANTLING AND LOADING..
Featured
Wood-Landia #200X, Single-Pass Log Ripper/Scragg Mill, 105 KVA, 200 amps, 380/460 Volts, 50/60 Hz, 3PH
Machinery Scene | Toledo, WA
Category: Sawmills
Seller: Machinery Scene
Location: Toledo, WA
Model: 200X
LOG RIPPER -200X, Single Pass Scragg/Scraggers, FT-KR-83, Power required : 200A/105KVA, 3 phase, 460V/60Hz, 380/50Hz., Weight: 5,300 LBS., Made By Woodlandia, Ontario, Canada., Included: Controller, In-feed and out-feed, fan, Low Usage, Currently operating in a building- Videos available., Additional photos and ...more
Adco West #Canter Sawmill, refurbished, with Keyknife chipping heads including power
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Adco
Model: CANTER
AdcoWest Sawmill Canter, - REFURBISHED, - Keyknife chipping heads including power, - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer, No wiring, switches, set works, or controls included but electric motors present are included., Feed through system as engineered by AdcoWest and operated ...more
Armstrong #Lh-4, Bandsaw Grinder Sharpener
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: LH-4
#4 LH Armstrong bandsaw grinder with Digicam. The customer has the Digicam software disk for the grinder.
Baker #BBR-0 Band Resaw
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BBR-0
Baker Band Resaw, Return conveyer, 480 volt 3 phase, 6" x 12" capacity.
Baker #Mini-Scragg, Scragg Mill, 6" diameter x 96" L log, 1" or 1.25" x 14' 2" L blade capacity, (2) 20 HP main, 5 HP feed, 65 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: MINI-SCRAGG
Year: 2026
BAKER Mini-Scragg Saw Mill Accepts logs up to 16" diameter to 8' 0" (96") long and blades adjust to preset width from 3-1/2" to 12" and will accept edge slabs up to 14" across.: -- (2) Main Drive 20 HP "TEFC" motors and a 5 HP variable speed hydraulic feedworks motor; 0 - 65 FPM feed speed. -- Blade capacity: 1" ...more
Baker Resaw Tailing Belt
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Brand new.never used.still on the original pallet.
Get email updates for newly added Sawmills
Wood sawmills are designed for efficient log processing and timber cutting, perfect for lumber production and custom milling tasks. They include models like canter sawmills for initial log breakdown, band resaws for detailed board cuts, and scragg mills for high-speed multi-cut operations.
Big Jake Scragg Mill
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Big Jake
Big Jack Scragg Mill.
JUST ADDED!
Brewer, Complete Scragg Mill & Pallet Cut Stock Line
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewer
Complete Brewer Scragg Mill and Pallet Cut Stock Line, System is still under power and available for inspection. Line is complete and includes:, - Log Deck, - Merchandising Slasher Saw, - Operator Cab, - Log Deck to Scragg, - Brewer Sharp Chain Scragg Mill #1, - Brewer Sharp Chain Scragg Mill #2, - Brewer 3-Head ...more
Cantek #HR11P, Horizontal Resaw, Voltage 230/480/3
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cantek
Model: HR11P
Year: 2021
Cantek Horizontal Resaw, Great Condition, Very Low Hours, Voltage 230/480/3.
Cleereman #36, circular sawmill, 100 HP electric engine, left hand
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleereman
Model: 36
Cleereman #36 Circular Sawmill, 100 HP Electric Engine, Left Hand.
Cleereman #36, Proportional Carriage, 3-headblock, right hand, (2 available) flippers
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cleereman
Model: 36
CLEEREMAN MODEL 36 Proportional Carriage: -- Right hand, 3-headblock, headblock spacing of 6'3" between 1 and 2; 2'-10" to 4'-10" between 2 and 3; 3rd headblock is movable with about 2' of stroke cable hook-up one end and cable ratchet on the other end. -- Pantograph, hydraulic power package; bottom ...more
Cleereman #36 Air Setworks
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleereman
Model: 36
Cleereman Model 36 Air Setworks.
Cleereman Sawmill Carriage, PawTawJohn setworks and 3D scanner
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleereman
Cleereman Carriage, PawTawJohn setworks and 3D scanner, Three headblock model LPC-42, Four position dogs in/out and bottom dog turning, Spare cylinders for all positions, Spare top and bottom dogs, 30 hp hydraulics.
CMC Sawmill With Vertical Edger, Green Chain, Conveyors, 2000
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cmc
Year: 2000
CMC Sawmill, Vertical Edger, Green Chain, Conveyors.
Comact #DDM6, Canter sawmill line, double length infeed, 27000 logs/24 hours, 360 FPM (2x6), 500 FPM 2x4
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Comact
Model: DDM6
***Photos coming***, Compact DDM6 Profile Canter Line, Double Length Infeed, Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4, Infeed belt conveyor, V flight scanning conveyor without the scanner and optimization system, One pass small log processor, Outfeed belt conveyor #1 ...more
Cooks #AC36, Portable Band Sawmill, hydraulic, log turners, squaring arms, 36" x 30' capacity, 2009, AS IS
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooks
Model: AC36
Year: 2009
2009 Cooks AC36 Sawmill, Fully Hydraulic, Log Turners/Clamps, Squaring Arms, Tapers, Rollers, Capacity - 36" x 30' long, No Motor.
JUST ADDED!
Cooks #AC3684, 84 HP Perkins Diesel 26 foot cut capability
Neal Forest Products | Belington, WV
Category: Sawmills
Seller: Neal Forest Products
Location: Plum Branch, SC
Mfr: Cooks
Model: AC3684
Year: 2007
Cook’s AC-36 Fully Hydraulic Sawmill – 84HP Perkins Diesel, Heavy-duty production sawmill built for serious output. This Cook’s AC-36 is a fully hydraulic, high-performance band mill powered by a reliable 84HP Perkins diesel engine, delivering the torque and efficiency needed for all-day cutting. ...more
Cooper End Dog Scragg Sawmill, complete mill, (2) Infeed Decks, cut off saw, debarker
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooper
Complete mill that needs to be removed from the current location. Seller will not split up the operation., (2) Infeed Decks:, - (2) 3-Strand Infeed Deck 24' Long, - H82 Chain, - 3-7/16" Shaft, - (2) 10 HP Drives, - 3-Strand infeed deck 60' Long, Cut Off Saw:, - 54" Saw, - 20 HP Motor, - Hourglass rollers, - ...more
Cooper End Dog Scragg Mill, 16', 2010
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooper
Year: 2010
Cooper 16' End Dog Scragg Mill, (2) 150 HP Motors, 56" Sawblades, Linear bearings for shifting saws, 6'-16' Capacity, Off-bearing conveyor, Board separator on outfeed, Electrical panel, Operator cab with controls, System has been dismantled and removed from service. It is ready to load.
Corinth #AL36, Sawmill With Log Turner, 100 HP 3 Phase Motor, Helle Log Turner, infeed table
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corinth
Model: AL36
100 HP 3 Phase Motor, Helle Log Turner, Infeed Table, Outfeed Table, 25HP Chip Blower.
Corley #44-40, Tong Dog Carriage, 4-heads, 5 HP, 18' long carriage
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corley
Model: 44-40
Corley 44-40 Tong Dog Carriage, 4-heads, 5 HP motor, 18 foot long carrage, Set works optional (not functional and Corley does not offer spares needed).
Corley, Sawmill & Carriage, 4-strand log deck, log turner, 3 HB carriage
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corley
Corley 4-strand log deck, Corley 3 HB Carriage with lineal positioning, Brand new (1-year ago) Lewis controls with scanning/setworks, Weight strain 6' band mill headrig, Corley log turner, Corley SMA280 shotgun carriage, Outfeed roll case with stops for cant transfer.
Cornell 42" Gang Edger, 150 HP
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cornell
Cornell 42" Gang Edger, 150 HP Motor (3 years old), (12) Gang Saws (6 new), (7) Moveable Saws (2 new), (24) Various size collars.
Cornell, Scragg Mill, 75 HP, 15' infeed rolls, outfeed w/ flippers, 3 strand deck
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cornell
Cornell Scragg Mill, 75 HP motors, 15′ infeed positioning rolls, Outfeed with flippers, cab, 16 presets, sharp chain, 3 strand log deck, large hydraulic pack, hydraulic feed works and off bearing belts, Heavy built, high production machine, low usage, On trailer and ready to go.
Edmiston, 4 Head Block Circular Sawmill, Running daily, 1987
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Edmiston
Year: 1987
Edmiston 4 Head Block Circular Sawmill, Good Running Condition, Used Occassionally.
Edmiston Complete Sawmill - Debarker, Edger, Chipper
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Edmiston
Complete sawmill that is used daily., Infeed deck to debarker, Morbark debarker with bark conveyor, Infeed deck to mill, Edmiston Sawmill: 4 HB Carriage, operator cab, drop conveyor for slabs, Edmiston Edger, Greenchain with rooftop, Precision 48" Chipper with infeed, All electrical, controls and hydraulics included.
Frick Sawmill (Parts Machine)
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Frick
Parts machine, log turner, hydraulic power pack, other parts.
Frick Portable Sawmill
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Frick
Frick Sawmill, 4 Head Block, Mounted on a drop deck trailer. Everything folds up for transport., Includes: Cummins motor.
Helle End Dog Scragg Mill, Sawcab, Vertical Edger, Power Panel, 4-Strand, 20' Infeed Log Deck
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Helle
Helle Scragg Mill, End Dogging Carriage, Sawcab, Helle Vertical Edger, Helle Power Panel, Infeed Log Deck: 4-Strand, 20', Sawdust Drag Chain: 30', Rooftop Conveyor: 4-Strand, 20', Misc decks, rollers, All electrical and controls.
horizontal machining center #2-Saw, Lumber Trimmer, Left-hand, push button setworks, 16' length capacity, 8" thick cut capacity
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hmc
Model: 2-SAW
HMC 2-Saw Trimmer Model ET-10,;Complete with the following s: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
HMC #AC44, Sawmill, 36 inch diameter blade, 1985
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: AC44
Year: 1985
HMC Corporation Sawmill, Has a 36 inch diameter blade.
HMC #HD-40, Carriage
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: HD-40
HMC Model HD-40 Carriage Drive, 50 HP Hydraulic Unit.
horizontal machining center Sawmill
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
This mill is ready to be removed from the current location., - 4 Roll Cases 24″ 2 center 6.5 Diameter 45′ 56′ 62′ 70′HMC All motor controls included, - 7 Lumber Decks Flat Chains 10′ 12′ 16′ 20′ 24′ 40′ 82′ 5 Chains WIDC All motor controls ...more
horizontal machining center 3 Head Block Carriage, 5x10 Cab with controls
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
HMC Carriage, 5x10 Cab with controls, System is already removed from service and ready to load., Notes from seller:, Carriage is 17'1" longKnee spacing is 63" from 1 to 2, 78" from 2 to 3, 1 to 3 is 141 1/4", Carriage frame is 76 1/2 " wide, Track centers are 62", Track rails are worn out. We used the old track ...more
Hurdle #3-HB, Complete Sawmill
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hurdle
Model: 3-HB
Year: 2017
Hurdle 3-Head Block Magnum LT Tong Dog Carriage, Top Saw, 40" Knee openings, 29" Dog Opening, Variable Tapering, Extra Heavy Duty Tong Dogs, 555 Series Feed, Heavy Duty Chain Log Turner, Top Saw, Verticle Edger with Laser Lights, HD Package, Sawyer's Cab, 3 Strand 20' Log Deck, Cant Turners (1 per Headblock) ...more
IMW #240SS, Dual Head Guide Resurfacer, 2-cutter wheel on one spindle, fully enclosed, 120V
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Imw
Model: 240SS
2 Cutter Wheels on One Spindle, Fully Enclosed, Easy Changeover for Different Saw Guides, 120V.
Jackson & Newman, complete shaving mill, knife grinders, shaker screen, cut-off saw, more
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jackson & Newman
Complete operation with land, (3) Jackson 8-knife shaving mills, Newman 32-knife shaving mill, Knife Grinders, Shaker Screen, Cut Off Saw, Briquette System, Drum Dryer with Burner and Blower, Complete electrical and control, (2) Verville VP300 Baggers with bins, Shrink wrapper, Truck Scales.
Ligna #8X40, Gang Edger, 40" width x 8" high opening, (5) blades, 125 HP, stacked air cylinder setworks w/ independent shifting on (3 available) blades
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ligna
Model: 8X40
LIGNA 8X40 Multi-Blade Edger/Gang Saw. 40" Wide by 8" high opening. : -- Bottom saw edger with (5) blades. Powered by a 125 HP TEFC motor. -- s stacked air cylinder setworks with independent shifting on (3) blades. -- Infeed table with pop-up chains and fence, outfeed rollcase. -- Includes: Powered infeed and outfeed ...more
Mar #5-TON, Log Trailer Loader, 5 Ton, 15 HP crane drive
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mar
Model: 5-TON
Log Truck Trailer LoaderComplete with the following major components and s: -- 5-Ton capacity cable lifting Crane. -- 15 HP Crane drive. -- Catwalk.NOTES: ● Dismantled as shown in later photos and ready to load. ● Loading is included in the price. ● LTL Load: Approx. 20' x 8' deck space; 10,000 ...more
Mater Mater Sawmill Right Hand, 14' 3-block carriage, log turner, hydraulic powered 20' log deck, 1964
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mater
Year: 1964
1964 RIGHT HAND MATER CIRCLE SAWMILL, - 290 Cummings diesel power with clutch engagement, - 14 foot 3 block carriage, - Ireland 8 husk with blower and off barrier belt, - spiral roll case Frick edger with blower hydraulic driven, - Ingersoll Rand 3 cylinder air compressor with new switches and electric motor, - log ...more
Mcdonough #62-in., Bandmill Wheel, 62" bottom wheel
Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mcdonough
Model: 62 IN.
MCDONOUGH Bandmill 62″ Bottom Wheel.
Meadows Portable Sawmill, Computer setworks, 225 HP Detroit Diesel
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Meadows
Meadows sawmill, New parts from MFG: Saw Arbor, Live belt conveyor, misc parts, Computer setworks, 225 HP Detroit Diesel.
Mighty Mite #E921W, sawmill
Liberty Machine Works | Preston, ID
Category: Sawmills
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Mighty
Model: E921W
Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All ...more
Morbark portable circle sawmill, electric vertical gang edger, 42" opening 4 knee carriage
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Morbark
Canadian Morbark Sawmill PLUS, Electric Vertical Gang Edger, Keyknife Headrig Slabber, 42" opening 4 knee carriage, (4) new Headrig blades 60", Modern Set Works, New tires.
Morgan Scragg Mill, 20' scragg deck with electric drive
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Morgan
Morgan Scragg Deck, 3′ x 21′6” scragg deck, Heavy 4 x 8 tubing frame, Avg 48” tall, Motor and drive, Heavy built, low usage, ready to load.
Morgan Scragg Mill, 40" blades, 50 hp motors, 5 hp hydraulic pack, hydraulic setworks, live deck controls
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Morgan
Morgan Scragg Mill, 40” blades, 50 hp motors, 5 hp hydraulic pack, Hydraulic setworks, live deck controls, hydraulic feed and off bearing belts, Will cut max 15” diameter and has dogs every 9′, Very low hours with all original belts, etc., 20′ and 33′ scragg decks available.
Newman #KM16, trimsaw, 5 heads, waste conveyor
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: KM16
Newman KM16 Trim Saw, 5-Heads, Waste Conveyor.
Newman #KM16, Trimsaw, 90% rebuilt with new main shaft, bearings, chains, aluminum slides, sprockets etc.
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: KM16
Newman KM16 Trim Saw, Has been 90% rebuilt with new main shaft, bearings, chains, aluminum slides, sprockets etc., Has electrical box with starters, 10 hp motors, Off bearing and waste conveyors, Comes with 21′ incline waste conveyor.
Oliver Sawmill, New Carriage Wheels & Battery
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Oliver
Oliver Sawmill, New Carriage Wheels, New battery.
Optimatic #Ts-06, Automatic Tooth Straightener, 80mm - 300mm for saw width, .7mm to 2.7mm saw thickness
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Optimatic
Model: TS-06
Optimatic TS-06 Tooth Straightener, Manufacturer :, Every Tooth - Every Run - Every Time, Introducing the TS06 automatic bandsaw tooth straightener., This latest Filing Room innovation from OPTIMATIC is designed to work in place of the backfeed on a bandsaw sharpener. The TS06 is timed from the feed of the bandsaw ...more
Pendu Sharp Chain Scragg Mill, Infeed System, Operator Cab, All controls and electrical
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Pendu
Selling as a complete package:, Pendu Sharp Chain Scragg, (2) 100 HP Motors with soft starts, Infeed System, Log turner, Operator Cab, All controls and electrical, (2) Log Decks: 3-Strand and 4-Strand, Pendu bark conveyor: 30'4" Long with 180 degree tail section, 17" flights 2" high, flights spaced 18-3/4" apart ...more
