1051 - 1100 of 2241 listings
Haas #VF-7, CNC vertical machining center, 84" X, 32" Y, 30" Y, 7500 RPM, 50 Taper, 84" x28"table,S/N 15424
Smith Machinery Co | Ames, IA
Category: Vertical CNC Machining Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Haas
Model: VF-7
Year: 1998
MOTOR ------------------ 208/230V, 3PH, 50/60 HZ, FULL LOAD -------------- 40 AMPS, LARGEST LOAD ----------- 30 AMPS, X-AXIS ----------------- 84 in, Y-AXIS ----------------- 32 in, Z-AXIS ----------------- 30 in, TABLE SIZE ------------- 84 in X 28 in, SPINDLE TAPER ---------- 50, SPINDLE SPEEDS --------- 7,500 RPM ...more
Haas #VF-7/40, CNC vertical machining center, 84" X, 32" Y, 30" Z, 7500 RPM, 24 automatic tool changer, Cat 40, chip auger, programmable coolant, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: VF-7/40
Year: 2011
Haas VF7/40 CNC Mill, Table Size: 84″x28″, X-Axis Travel: 84″, Y-Axis Travel: 32″, Z-Axis Travel: 30″, Spindle Power: 20HP, Spindle Speed: 7,500 RPM, Spindle Taper: CAT 40, Tool Changer: 24 ATC, Dimensions: 214″x102″x128.5″, Weight: 25,600lbs, Haas CNC Control, 4th-Axis ...more
Haas #VF-7/40, CNC Vertical Machining Center, 84" X, 32" Y, 30" Z, 84" x 28" Table, 4-Axis, 7500 RPM, 20 HP, CAT 40, 24 automatic tool changer, 2011
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-7/40
Year: 2011
Make: Haas, Model: VF-7/40, Year: 2011, Machine Location: California, Table Size: 84″x28″, X-Axis Travel: 84″, Y-Axis Travel: 32″, Z-Axis Travel: 30″, Spindle Power: 20HP, Spindle Speed: 7,500 RPM, Spindle Taper: CAT 40, Tool Changer: 24 ATC, Dimensions: ...more
Haas #VF-7/40, Cnc vertical machining center, 4Th Axis Ready Mill
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: VF-7/40
Year: 2011
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Replacement Cost Over $195,000 with Similar ...more
Haas #VF-7/50, vertical machining center, 30+1 side mount tool changer, 84" X, 32" Y, 30" Z, 7500 RPM, #50, 30 HP, 84" x28" tbl., 1000 psi thru spindle coolant, 2012
Machine Tool Bids | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: VF-7/50
Year: 2012
MACHINE, X- Axis Travel: 84", Y-Axis Travel: 32", Z-Axis Travel: 30", Spindle Nose to Table Max: 35", Spindle Nose to Table Min: 5", Table Length: 84", Table width: 28", Max. Weight on Table: 4,000 Lbs, Max. Spindle Bore: 30HP, Max. Spindle RPM: 7,500 RPM, Spindle Taper: CT50.
Get email updates for newly added Vertical CNC Machining Centers
Vertical CNC Machining Centers (also known as vertical milling machines) are CNC machines with a vertically oriented spindle, enabling efficient machining of a wide range of parts. Commonly used in industries like aerospace, automotive, and metal fabrication, these centers provide precision and flexibility for milling, drilling, and tapping operations. Vertical CNC machining centers are ideal for both high-volume production and detailed work, supporting high accuracy and ease of setup.
Haas #VF-7/50, CNC vertical machining center, 31+1 side mount tool changer, 84" X, 32" Y, 30" Z, 7500 RPM, #50, 30 HP, 1000 psi thru spindle coolant, 2012
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-7/50
Year: 2012
X- Axis Travel: 84", Y-Axis Travel: 32", Z-Axis Travel: 30", Spindle Nose to Table Max: 35", Spindle Nose to Table Min: 5", Table Length: 84", Table width: 28", Max. Weight on Table: 4,000 Lbs, Max. Spindle Bore: 30HP, Max. Spindle RPM: 7,500 RPM, Spindle Taper: CT50.
Haas #VF-7B/40, CNC vertical machining center, 84" X, 32" Y, 30" Z, 10000 RPM, 24 automatic tool changer, 30 HP, chip auger, 2004
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-7B/40
Year: 2004
Make: HaaS, Model: VF-7, Year: 2004, Machine Location: California, X Axis: 84″, Y Axis: 32″, Z Axis: 30″, Table Size (L × W): 84″ × 28″, Max Weight On Table: 4,000 lbs, Spindle Taper: CAT40, Spindle Motor HP: 30 HP, Spindle Speed: 10,000 RPM, Tool Changer Capacity: 24 ...more
Haas #VF-7B/40, CNC vertical machining center, 84" x 28" capacity, 24 automatic tool changer, 208/230 V., 2004
HGR24 | Euclid, OH
Category: Vertical CNC Machining Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Haas
Model: VF-7B/40
Year: 2004
Inventory No. 1225-083-0001 Manufacturer Haas Model No. VF-7B/40 Name CNC VMC Arrival Date 12-22-2025 Dimensions L x W x H (inches) Unavailable Capacity 84" X 28" Electrical 3/50/60/208/230 Weight (lb.) 23580 Category CNC Condition Used Available Quantity 1 Serial No. 35384 Make Year 2004 Item 24 Position Tool ...more
Haas #VF-7D/40, CNC vertical machining center, 24 Station automatic tool changer, 4th-Axis brushless drive, programmable coolant nozzle, chip auger
Machinesused.com | Minneapolis, MN
Category: Vertical CNC Machining Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: VF-7D/40
Year: 2004
Haas VF-7D/40 CNC Vertical Machining Center, 24 Station ATC, 4th-Axis Brushless Drive, Programmable Coolant Nozzle, Chip Auger, Stock: 7185Manufacturer: HaasModel: VF-7/40Age: 2004 Machine Control: Haas 32bit CNC, Table Size: 84" x 28", Machine Travels (X/Y/Z): 84" x 32" x 30", Table Capacity: 4,000 lbs, Spindle ...more
Haas #VF-8, CNC vertical machining center, 20 automatic tool changer, 64" X, 40" Y, 30" Z, 7500 RPM, CT40,20 HP, usb upgrade, 4th Axis wired, 1996
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-8
Year: 1996
Make: Haas, Model: VF-8, Year: 1996, Machine Location: Michigan, X-Axis Travel: 64″, Y-Axis Travel: 40″, Z-Axis Travel: 30″, Table Size: 64″ x 36″, Max Table Load: 4,000 LBS, Spindle Speed: 7,500 RPM, Spindle Motor: 20 HP, Spindle Taper: BT 40, Auto Tool Changer: 20 Positions, Electrical ...more
Haas #VF-8, CNC vertical machining center, 20 automatic tool changer, 64" X, 40" Y, 30" Z, 7500 RPM, 20 HP,rigid tap,chip auger, 1999
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-8
Year: 1999
Make: Haas, Model: VF-8, Year: 1999, Machine Location: New Hampshire, Table Size: 64″ x 36″, Max Table Load: 4,000 LBS, X Axis: 64″, Y Axis: 40″, Z Axis: 30″, Spindle Speed: 7,500 RPM, Spindle Motor: 20 HP, Spindle Taper: #40, ATC: 20, Haas CNC Control, Rigid Tapping, Chip Auger ...more
Haas #VF-8, CNC Vertical Machining Center, 3-Axis, 64" X, 40" Y, 30" Z, 36" x 64" Table, 20 HP, 10000 RPM, 20 automatic tool changer, 2006
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-8
Year: 2006
HAAS VF-8 Vertical Machining Center, 2006 model, with a spacious 64"x40"x30" XYZ travel. s 10,000 RPM, 20 HP, 20-tool automatic tool changer, and a large 64"x36" table., 2006 HAAS VF-8, X. 64", Y. 40", Z. 30", Power. 20 hp, RPM. 10,000 RPM, # ATC. 20, Table-W. 36", Table-L. 64", # Axis. 3, Control. CNC (HAAS).
Haas #VF-8, 24 side mount tool changer, 24" X, 40" Y, 30" Z, #40, 20 HP, 64" x36" tbl., rigid tap, chip auger, thru spindle coolant, 2001
Greenway & Associates Ltd | Orange City, IA
Category: Vertical CNC Machining Centers
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Haas
Model: VF-8
Year: 2001
, Thru spindle coolant, Manual pulse generator, Brushless servos, High speed machining, Programmable coolant, Quick code, Rigid tapping, Chip auger, Manuals and backup disc.
Haas #VF-8, 64" X, 40" Y, 30" Z, 7500 RPM,Cat 40,20 automatic tool changer, 20 HP,R.T.,prog coolant nozzle,tooling, 1999
A Green Co Inc | Worcester, MA
Category: Vertical CNC Machining Centers
Seller: A Green Co Inc
Location: Worcester, MA
Mfr: Haas
Model: VF-8
Year: 1999
1-(used) Haas Model VF-8 CNC Vertical Machining Center, New 1999., Longitudinal travel (X axis). 64", Cross travel (Y axis). 40", Vertical travel (Z axis). 30", Table working surface. 36" x 64", Min/max distance spindle to table. 4" - 34", Max. table load. 4,000 lb., Spindle taper. CAT-40, Max. spindle speed. 7,500 ...more
Haas #VF-8/40, CNC vertical machining center, 3-Axis, 64" X, 40" Y, 30" Z, 8100 RPM, 24+1 side mount tool changer, Cat 40, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: VF-8/40
Year: 2014
HAAS VF8/40 CNC MillCNC CONTROL Haas CNC# AXIS 3TABLE-L 64″TABLE-W 36″MAX TABLE LOAD CAPACITY 4,000 lbX-AXIS (LONGITUDINAL TRAVEL) 64″Y-AXIS (CROSS TRAVEL) 40″Z-AXIS (VERTICAL TRAVEL) 30″MAX CLEARANCE TABLETOP TO SPINDLE NOSE 34″MIN CLEARANCE TABLETOP TO SPINDLE NOSE 4″FEED ...more
Haas #VF-8/40, CNC vertical machining center, 24+1 automatic tool changer, 64" X, 40" Y, 30" Z, 8100 RPM, #40, 30 HP, rigid tap, 3-Axis, 2014
Great American Eqpt Co | Cincinnati, OH
Category: Vertical CNC Machining Centers
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Haas
Model: VF-8/40
Year: 2014
HAAS VF-8/40 3-AXIS CNC VERTICAL MACHINING CENTER, Model VF-8/40, S/N 1109801, New 2014, Stock# Q12104, Haas CNC Control, 8100 RPM Spindle, Rigid Tapping, 24+1 Station Tool Changer, Tool Touch Probe, Setup for Part Probe (Probe is broken), Programmable Coolant Nozzle, Chip Auger, Tool Holders Included, Coolant ...more
Haas #VF-8/40, CNC Vertical Machining Center, 64" X, 40" Y, 30" Z, 64" x 36" Table, 30 HP, 8100 RPM, CAT40 Taper, 24+1 automatic tool changer, 2014
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-8/40
Year: 2014
Used vertical machining center available. s 64"x36" table, 8100 RPM spindle, CAT 40 taper, 24+1 tool changer, 600 IPM feed rates, and tool touch probe. Includes CNC control, coolant system, chip auger, and tool holders., Table (L x W). 64" x 36", Max Table Load Capacity. 4,000 lb, X-Axis (Longitudinal Travel). 64" ...more
Haas #VF-8/50, vertical machining center, 15" 4th Axis, 64" X, 40" Y, 30" Z, 7500 RPM, 30 HP, 30+1 side mount tool changer
B & B Oilfield Services | Broussard, LA
Category: Vertical CNC Machining Centers
Seller: B & B Oilfield Services
Location: New Iberia, LA
Mfr: Haas
Model: VF-8/50
HAAS VF-8/50, Travels, X Axis 64.0 in, Y Axis 40.0 in, Z Axis 30.0 in, Spindle Nose to Table (~ max) 35.0 in, Spindle Nose to Table (~ min) 5.0 in, Spindle, Max Rating 30.0 hp, Max Speed 7500 rpm, Max Torque 340 ft-lbf @ 700 rpm, Drive System 2-Speed Gearbox, Taper CT 50, Bearing Lubrication Air / Oil Injection ...more
Haas #VF-8D, vertical machining center, w/Chip Auger, 64" X, 40" Y, 30" Z, 64" x 36" Table, 20 HP, 30000 RPM, 40 Taper, 24+1 automatic tool changer, 2005
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-8D
Year: 2005
Make: Haas, Model: VF-8, Year: 2005, Machine Location: Alabama, Table Size: 64″ x 36″, Table Load Capacity: 4,000 LBS, X Axis Travel: 64″, Y Axis Travel: 40″, Z Axis Travel: 30″, Spindle Taper: 40, Spindle Speed: 30,000 RPM, Spindle Motor: 20 HP, ATC: 24+1, Haas CNC Control, 24 Station ...more
Haas #VF-9, CNC vertical machining center, 4-Axis drive, 2001
Digital Shovel Holdings Inc | Scarborough, ON
Category: Vertical CNC Machining Centers
Seller: Digital Shovel Holdings Inc
Location: Toronto, ON
Mfr: Haas
Model: VF-9
Year: 2001
2001 Haas VF 9 Vertical CNC Mill. 4-Axis Drive, 3 built in with optional bed mounted 3rd party 4th Axis. Machine has drive for the 4th axis, however we never used it as it didn't fit our application. Functional and Operating - Selling as is. Currently used in the production line for milling glass polyester type ...more
Haas #VF-9, vertical machining center
MBI Worldwide LLC | Vernon Rockville, CT
Category: Vertical CNC Machining Centers
Seller: MBI Worldwide LLC
Location: Vernon Rockville, CT
Mfr: Haas
Model: VF-9
Haas #VF-9/40, vertical machining center, 84" X, 40" Y, 30" Z, 10000 RPM, 24 automatic tool changer,thru spindle coolant,Renishaw,low hours, 2007
Sterling Machinery Ventures | Commerce Twp., MI
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Ventures
Location: Commerce Twp., MI
Mfr: Haas
Model: VF-9/40
Year: 2007
HAAS VF-9/40 VERTICAL MACHINING CENTER, NEW 2007, LOW HOURS, CATALOG :, Table size: 84" x 36", Table capacity: 4,000 pounds, X-axis travel: 84", Y-axis travel: 40", Z-axis travel: 30", Rapid traverse rate (x/y/z): 600 ipm, Spindle taper: CAT 40, Spindle speed: 10,000 rpm, Main motor: 30 HP 2-Speed Geared Head, Spindle ...more
Haas #VF-9/40, CNC Vertical Machining Center, 5-Axis, 84" X, 40" Y, 30" Z, 36" x 84" Table, 30 HP, 8100 RPM, 25 automatic tool changer, 2015
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-9/40
Year: 2015
2015 HAAS VF-9/40, X. 84", Y. 40", Z. 30", Power. 30 hp, RPM. 8,100 RPM, # ATC. 25, Table-W. 36", Table-L. 84", # Axis. 5, Control. CNC (HAAS), 8" Extended Z-Axis Travel, High Speed Machining, 300 PSI Through Spindle Coolant, Haas TR-310 5th Axis, Internal High Voltage Transformer, Auxiliary Coolant Filter.
Haas #VF-9/40, with TR-310 5th Axis, 300 psi thru spindle coolant, HSM, 8" extended Z, Hi-Volt Trans, Aux. Coolant Filter, 2015
Tight Tolerance Machinery | Peoria, AZ
Category: Vertical CNC Machining Centers
Seller: Tight Tolerance Machinery
Location: Peoria, AZ
Mfr: Haas
Model: VF-9/40
Year: 2015
Haas VF-9/40 with TR-310 5th Axis Trunnion Table, NEW: 2015, Table Size.84" x 36", Maximum Weight on Table.4,000 LBS, Spindle Nose to Table.4" - 34", X-Axis Travel.84", Y-Axis Travel.40", Z-Axis Travel.30", Spindle Taper.CAT-40, Spindle Motor.30 HP, Spindle Speed.8,100 RPM, Max Cutting.500 IPM, Rapids (X,Y,Z).600 IPM ...more
JUST ADDED!
Haas #VF-0, CNC vertical machining center, 20 automatic tool changer, 20" X, 16" Y, 20" Z, 7500 RPM, #40, 15 HP, 26" x14" tbl., HRT160 4-Axis, 1997
Machine Tool Bids | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: VF-0
Year: 1997
JUST ADDED!
Haas #VF-10/40, vertical machining center, 20+1 automatic tool changer, 120" X, 32" Y, 30" Z, 7500 RPM, #40, 20 HP, 120" x28" tbl., 1998
G-2000 | Toledo, OH
Category: Vertical CNC Machining Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Haas
Model: VF-10/40
Year: 1998
MODEL.: VF-10/40, YEAR NEW.: 1998, TRAVELS:, X AXIS.: 120", Y AXIS.: 32", Z AXIS.: 30", SPINDLE:, SPINLE HP.: 20, SPINDLE NOSE TO TABLE MAX.: 34", SPINDLE NOSE TO TABLE MIN.: 4", SPINDLE RPM.: 7500, MAX TORQUE.: 90 FT LB @ 2000 RPM, TAPER.: 40, TABLE:, LENGTH.: 120", WIDTH.: 28", MAX WEIGHT ON TABLE.: 4,000 LBS, TOOL ...more
JUST ADDED!
Haas #VF-11, CNC vertical machining center, 120" X, 40" Y, 30" Z, CT40, 40 automatic tool changer, 10000 RPM, Probing, thru spindle coolant, 10k RPM, 120" x28", Coldfire cnc, 2009
Machinesused.com | Minneapolis, MN
Category: Vertical CNC Machining Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: VF-11
Year: 2009
The Haas VF11 is a heavyduty, largeframe CNC vertical machining center designed for machining oversized workpieces that require long travels, high rigidity, and reliable spindle performance. With one of the largest XYZ travel envelopes in the Haas VF Series, the VF11 is ideal for aerospace components, large plates ...more
JUST ADDED!
Haas #VF-11/40, CNC vertical machining center, 3-Axis, wired for 4th Axis, 120" X, 40" Y, 30" Z, 12000 RPM, 25 automatic tool changer, 2018
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: VF-11/40
Year: 2018
2018 HAAS VF-11/40, X Axis Travel. 120", Y Axis Travel. 40", Z Axis Travel. 30", Spindle Motor. 30 hp, Spindle Speed. 12,000 RPM, ATC Capacity. 25, Spindle Taper. 40, # Axis. 3, Table-W. 28", Table-L. 120", HAAS CNC Control, Wired for 4th Axis, Through Spindle Coolant, Wireless Intuitive Probing (WIPS), High Speed ...more
JUST ADDED!
Haas #VF-11/50, CNC vertical machining center, 4-Axis, 120" X, 40" Y, 30" Z, 7500 RPM, 30 automatic tool changer, 1000 psi coolant thru spindle, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: VF-11/50
Year: 2014
Haas VF11/50 CNC Mill, Table size: 120″ x 40″, X Travel: 120″, Y Travel: 40″, Z Travel: 30″, Power: 30 hp, RPM: 7,500 RPM, # ATC: 30, Taper: CT 50, Table-W: 28″, Table-L: 120″, # Axis: 4, Haas CNC COntrol, HRT450 4th Axis Rotary Table, High Pressure 1000 PSI Coolant Through ...more
Haas #VF-12/40, CNC vertical machining center, 30 automatic tool changer, 150" X, 32" Y, 30" Z, 15000 RPM, HSK-63A, 30 HP, 150" x28" tbl., Next Gen, 2023
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: VF-12/40
Year: 2023
Haas VF12/40machine TRAVEL X AXIS 150″TRAVEL Y AXIS 32″TRAVEL Z AXIS 30″SPINDLE POWER 30 hpSPINDLE SPEED RPM 15,000 RPMTOOL CHANGER CAPACITY 30 toolsSPINDLE TAPER HSK-63ATABLE-W 150″TABLE-L 28″# AXIS 3CONTROL CNC (Haas (Next Gen))DIMENSIONS 343″L x 110″W x 134″HWEIGHT ...more
Haas #VF-12/50, CNC vertical machining center with HRT-450 4th Axis rotary table, 150" X, 32" Y, 30" Z, 7500 RPM, 30+1 side mount tool changer, 2014
Equipment Hub | Decatur, GA
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haas
Model: VF-12/50
Year: 2014
Stock #: 143250010, Location: Houston, TX, Brand: Haas, Model: VF-12/50, Year: 2014, Approx. Shipping Weight: 40,000 LBS., Approx. Shipping Dimensions: Main Machine: 360"L x 110"W x 130"H Additional Components: 96"L x 96"W x 36"H, Skidding Fee: Skidding Unavailable, Loading Fee: Loading ...more
Haas #VF-12/50, vertical machining center, #50, HRT 450 4-Axis rotary table, 1000 psi thru spindle coolant
Thoroughbred Machinery Co. | Houston, TX
Category: Vertical CNC Machining Centers
Seller: Thoroughbred Machinery Co.
Location: Houston, TX
Mfr: Haas
Model: VF-12/50
JUST ADDED!
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 20" X, 16" Y, 20" Z, 8100 RPM, #40, 4-Axis rotary table, 2015
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2015
Haas 4th Axis Rotary, The Haas VF-1 Vertical Machining Center (2015) is a compact, high-performance CNC solution for precision milling, drilling, tapping, and boring. Ideal for automotive, aerospace, and manufacturing, it s rigid tapping for superior thread quality. Its small footprint makes it perfect for job shops ...more
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, rigid tap, 2015
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2015
Low hrs| Probe, Used Haas VF-2 Vertical Machining Center 2015 with CNC Haas Control. Ideal for industries like aerospace, medical, and automotive. Perfect for high-speed milling, drilling, tapping, and precision machining. Ideal for high-volume production with fast tool changes and high-tolerance parts., X-Axis ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, 4-Axis rotary table, rigid tap, 2016
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2016
Haas 4th Axis Rotary, Enhance shop productivity with this Haas VF-2 Vertical Machining Center (2016). Featuring a reliable 40-taper spindle and user-friendly Haas control, it delivers precision milling for prototyping and production. Ideal for aluminum, steel, titanium, and plastics, it excels in aerospace ...more
Haas #VF-2, vertical machining center, 36" X, 14" Y, 20" Z, 8100 RPM, 30 HP, 20 automatic tool changer, 4th & thru spindle coolant Ready, probe, auger, rigid tap, 14" x 36" table, 2013
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Vertical CNC Machining Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Haas
Model: VF-2
Year: 2013
2013 HAAS VF-2, TABLE LENGTH. 36", TABLE WIDTH. 14", X-AXIS TRAVEL. 30", Y-AXIS TRAVEL. 16", Z-AXIS TRAVEL. 20", SPINDLE SPEED. 8,100 RPM, SPINDLE MOTOR. 30 hp, SPINDLE TAPER. CAT 40, TOOL CAPACITY (ATC). 20, RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS), THROUGH-SPINDLE COOLANT READY, 4TH AXIS DRIVE & WIRING ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, Probing, 2-Speed Gear Box, 24 automatic tool changer, 4th Axis Drive, High Speed Machining
Machinesused.com | Minneapolis, MN
Category: Vertical CNC Machining Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: VF-2
Year: 2009
The Haas VF2 CNC Vertical Machining Center is one of the most widely trusted and versatile VMCs in modern machining environments. Known for its rigid construction, userfriendly Haas control, and reliable performance, the VF2 is an ideal solution for job shops, contract manufacturers, and production facilities ...more
JUST ADDED!
Haas #VF-2, vertical machining center, 30" X, 16" Y, 20" Z, 12000 RPM, 36" x14" table, 30 automatic tool changer, WIPS, Rigid Tapping, Chip Auger, 2022
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2022
Make: HAAS, Model: VF2, Year: 2022, Machine Location: Upon Request, X-Axis Travel: 30″, Y-Axis Travel: 16″, Z-Axis Travel: 20″, Table Size: 36.0″ x 14.0″, Max Table Load: 3,000 lbs, Spindle Speed: 12,00 RPM., Spindle Power: 30 hp, Spindle Taper: CT40, Rapid Traverse Rates: 1,000 ipm, Max ...more
JUST ADDED!
Haas #VF-2B, CNC vertical machining center, 30" X, 16" Y, 20" Z, 10000 RPM, 20 HP, 20 automatic tool changer, Chip Conv., thru spindle coolant, 2007
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2B
Year: 2007
Make: Haas, Model: VF-2, Year: 2007, Machine Location: Tennessee, X-Axis Travels: 30″, Y-Axis Travels: 16″, Z-Axis Travels: 20″, Table Size: 36″ x 14″, Max Table Load: 3,000lbs, Spindle Nose to Table: 4″ – 24″, Spindle Taper: CAT 40, Spindle Speed: 10,000 RPM, Spindle ...more
JUST ADDED!
Haas #VF-2B, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 7500 RPM, 20 HP, 14" x36" tbl., thru spindle coolant, 2005
PM Machines | Santa Ana, CA
Category: Vertical CNC Machining Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: VF-2B
Year: 2005
2005 HAAS VF-2B, X. 30", Y. 16", Z. 20", Power. 20 hp, RPM. 7,500 RPM, # ATC. 24, Table-W. 14", Table-L. 36", Dimensions. 90" x 86" x 95", Weight. 8,000, Thru Spindle Coolant, Wire for 4th Axis.
JUST ADDED!
Haas #VF-2B, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 10000 RPM, #40, 20 HP, 14" x36" tbl., Renishaw probe, rigid tap, thru spindle coolant, 2011
PM Machines | Santa Ana, CA
Category: Vertical CNC Machining Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: VF-2B
Year: 2011
2011 HAAS VF-2B, X. 30", Y. 16", Z. 20", Power. 20 hp, RPM. 10,000 RPM, # ATC. 24, Taper. CT-40, Table-W. 14", Table-L. 36", Dimensions. 90" x 86" x 95", Weight. 8,000, High Intensity Lighting, Programmable Coolant Nozzle, Rigid Tapping, WIPS-R Intuitive Renishaw Probing.
Haas #VF-2D, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 10000 RPM, #40, 20 HP, 36" x14" tbl., 2008
MD Equipment Services LLC | Crooked River, OR
Category: Vertical CNC Machining Centers
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Haas
Model: VF-2D
Year: 2008
Vertical Machining Center, Manufacturer: Haas Automation, Inc., Model No.: VF-2D, Date of Mfg.: 4/2008, Electrics: 208-230 Volt, 3 Phase, 50-60 Hertz, 40 Amps FLA, Main Motor: 20 HP Vector Dual Drive, Hours (January 7, 2026):,.Servo Time: 6,967,.Motion Time: 9,021,.Spindle Time: 9,734, s:,.Haas CNC Control,.Table ...more
Haas #VF-2D, 4 Axis CNC vertical machining center, 30,000 RPM, 20 automatic tool changer, 20 HP, probe, 671 cut hours, 2008
Inter-Plant Sales | Hugo, MN
Category: Vertical CNC Machining Centers
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Haas
Model: VF-2D
Year: 2008
JUST ADDED!
Haas #VF-2D, vertical machining center, 2003
ESS Industrial | Woodruff, SC
Category: Vertical CNC Machining Centers
Seller: ESS Industrial
Location: Woodruff, SC
Mfr: Haas
Model: VF-2D
Year: 2003
, Travels (X, Y, Z): 30" x 16" x 20" (762 x 406 x 508 mm), Table Size: 36" x 14" (914 x 356 mm), Spindle Speed: 7,500 RPM to 10,000 RPM, Spindle Motor: 20 HP (14.9 kW) Vector Drive, Spindle Taper: CAT 40, Tool Changer: 20 or 24+1 Side-Mount Tool Changer, Rapid Traverse (X, Y, Z): 710 IPM to 1,000 IPM, Max Table Load: ...more
JUST ADDED!
Haas #VF-2SS, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 12000 RPM, #40, 40 HP, 36" x14" tbl., rigid tap, 2007
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: VF-2SS
Year: 2007
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, Rigid Tapping, Coolant System ...more
JUST ADDED!
Haas #VF-2SS, vertical machining center, 30" X, 16" Y, 20" Z, 12000 RPM, 30 HP, 24 automatic tool changer, 36" x14" table, Rigid Tapping, 2014
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2SS
Year: 2014
Make: Haas, Model: VF-2ss, Year: 2014, Machine Location: Texas, Table Size: 36″ x 14″, Table Load Capacity: 1,500 LBS, X Axis Travel: 30″, Y Axis Travel: 16″, Z Axis Travel: 20″, Spindle Taper: CAT 40, Spindle Speed: 12,000 RPM, Spindle Motor: 30 HP, ATC: 24+1, Haas CNC Control, Wireless ...more
JUST ADDED!
Haas #VF-2SS, vertical machining center, 30" X, 16" Y, 20" Z, 12000 RPM, 30 HP, 24 automatic tool changer, 36" x14" table, Rigid Tapping, 4th Axis Ready, 2015
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2SS
Year: 2015
Make: Haas, Model: VF-2ss, Year: 2015, Machine Location: Texas, Table Size: 36″ x 14″, Table Load Capacity: 1,500 LBS, X Axis Travel: 30″, Y Axis Travel: 16″, Z Axis Travel: 20″, Spindle Taper: CAT 40, Spindle Speed: 12,000 RPM, Spindle Motor: 30 HP, ATC: 24+1, Haas CNC Control, Wireless ...more
JUST ADDED!
Haas #VF-2SS, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 12000 RPM, #40, 30 HP, 14" x36" tbl., TRT160 5-Axis Trunnion$, WIPS, 300 psi thru spindle coolant, 2025
PM Machines | Santa Ana, CA
Category: Vertical CNC Machining Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: VF-2SS
Year: 2025
2025 HAAS VF-2SS, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 12,000 RPM, # ATC. 24, Taper. 40, Table-W. 14", Table-L. 36", 300 PSI TSC, 4th Axis Ready, 5th Axis Ready, WIPS, Chip Auger, DWO and TCPC, Programmable Coolant, HSM, Toolholders and Cart, Worholding, TRT160 5th Axis Trunnion.
Haas #VF-2SS, CNC vertical machining center, 24 side mount tool changer, 30" X, 16" Y, 20" Z, #40, 40 HP, rigid tap, 36" x14" tbl., 2010
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: VF-2SS
Year: 2010
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 20,938 Hours Cutting Time ...more
JUST ADDED!
Haas #VF-2SS, vertical machining center, 30" X, 16" Y, 20" Z, 30 HP, 15000 RPM, 30 automatic tool changer, 300 psi thru spindle coolant, probe, rigid tap, 2309 cut hours, 2019
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Vertical CNC Machining Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Haas
Model: VF-2SS
Year: 2019
2019 HAAS VF-2SS, TABLE LENGTH. 36", TABLE WIDTH. 14", X-AXIS TRAVEL. 30", Y-AXIS TRAVEL. 16", Z-AXIS TRAVEL. 20", SPINDLE SPEED. 15,000 RPM, SPINDLE MOTOR. 30 hp, SPINDLE TAPER. CAT 40, TOOL CAPACITY (ATC). 30, HAAS NEXTGEN CONTROL, 15,000 RPM SPINDLE (CAT40), THROUGH-SPINDLE COOLANT (300 PSI), RENISHAW WIRELESS ...more
