18 Results
JUST ADDED!
Aloris #CA-1, Turning and Facing Holder, 1/2-1" tool bit capacity, for 14-20" swing lathes
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Aloris
Model: CA-1
ALORIS CA-1 TURNING AND FACING HOLDERUSEDBRAND: ALORISTYPE: CA-1TURNING AND FACING HOLDERLATHE COMPATIBILITY: FITS 14" TO 20" LATHE SWINGTOOL BIT CAPACITY: 1/2 1OVERALL LENGTH (INCH): 4-1/2OVERALL HEIGHT (INCH): 2-1/2DIAGRAM IN PHOTOS FOR BELOW DIMENSIONS:A: 1-11/16 (CENTERLINE HEIGHT)B: 1 (MAX TOOL SIZE)C: 3/4D: ...more
Aloris #CA-1, quick change turning & facing tool holder, 1" max tool bit, 14"-20" swing, 4-1/2" OAL, 2-1/2" high
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CA-1
Spec Sheet:, Aloris CA-1 Turning and Facing Holder, USED, Brand: Aloris, Type: CA-1, Turning and Facing Holder, Lathe Compatibility: Fits 14" to 20" lathe swing, Tool Bit Capacity: 1/2 1, Overall Length (Inch): 4-1/2, Overall Height (Inch): 2-1/2, Diagram in Photos for below dimensions:, A: 1-11/16 (centerline ...more
Aloris #CXA 42 Lathe Tool Post Boring Bar Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA
Spec Sheet:, Aloris CXA 42 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 42, Wedge: 2-1/4, Holder Type: Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height 2 in, Width: 2-1/4, Overall Length (Inch) 3-3/4, Boring Bar Size: 1in.
Aloris #CXA 7 Parting Blade Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA
Spec Sheet:, Aloris CXA 7 Parting Blade Holder, USED, Brand: Aloris, Part Number: CXA 7, Tool Holder, Wedge: 2-1/4, Tool Post Holder Number 7, Tool Post Holder Type Universal Parting Blade Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Maximum Cutting Tool Size ...more
Aloris #CXA 7 Parting Blade Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA
Spec Sheet:, Aloris CXA 7 Parting Blade Holder, USED, Brand: Aloris, Part Number: CXA 7, Tool Holder, Wedge: 2-1/4, Tool Post Holder Number 7, Tool Post Holder Type Universal Parting Blade Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Maximum Cutting Tool Size ...more
Get email updates for newly added Tool Holders
Tool Holders (also known as toolholding devices or machine tool holders) are components used to securely attach cutting tools to the spindle of machining equipment, such as CNC machines or lathes. Commonly used in industries like metalworking, manufacturing, and aerospace, tool holders ensure stability, precision, and proper alignment during machining operations. They are essential for achieving accurate cuts, consistent performance, and high-quality results in various applications.
Aloris #CXA 4 Lathe Tool Post Boring Bar Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA
Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o Bushing (Inch) 1, Boring Bar ...more
Aloris #CXA-1 Lathe Tool Post Holder w/ Kennametal MVJNR-123B
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-1
Spec Sheet:, Aloris CXA 1 Lathe Tool Post Holder w/ Kennametal MVJNR-123B, USED, Brand: Aloris, Part Number: CXA 1, Tool Holder, Wedge: 2-1/4, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2-1/8, Overall Length (Inch) 3-1/2, Maximum Cutting Tool Size (Inch) 3/4, Centerline Height (Inch) ...more
JUST ADDED!
Aloris #CXA-4, Boring Bar Holder, 3/4" or 1" bar capacity, for 13-18" swing lathes
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Aloris
Model: CXA-4
The Aloris Cxa 4 is a lathe tool post boring bar holder designed for use with a 2-1/4 inch wedge-type tool post. This holder is compatible with lathes featuring a swing between 13 and 18 inches. Technical include an overall height of 2 inches and an overall length of 3-1/2 inches. The unit accommodates boring bars ...more
Aloris #CXA-4 Boring Bar Holder w/ Accupro DA100 Collet Chuck
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-4
Spec Sheet:, Aloris CXA 4 Boring Bar Holder w/ Accupro DA100 Collet Chuck, USED, Brand: Aloris, Part Number: CXA 4, Boring Bar Tool Holder, Bore: 1, Bushing not included, Wedge: 2-1/4, Diagram in Photos for dimensions:, A: 1; B: 2; D: 1; D1: 3/4, Comes With:, Accupro DA100 Collet Chuck, 1 OD, 7-1/2 OAL.
Aloris #CXA-4 Lathe Tool Post Boring Bar Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-4
Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o ...more
Aloris #CXA-4 Lathe Tool Post Boring Bar Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-4
Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o ...more
Aloris #CXA-4 Boring Bar Tool Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-4
Spec Sheet:, Aloris CXA 4 Boring Bar Tool Holder, USED, Brand: Aloris, Part Number: CXA 4, Boring Bar Tool Holder, Bore: 1, Bushing included, Wedge: 2-1/4, Diagram in Photos for dimensions:, A: 1; B: 2; D: 1; D1: 3/4.
JUST ADDED!
Aloris #CXA-6, Multiple Tool Holder, 3/8-5/8" bit range, for 13-18" swing lathes
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Aloris
Model: CXA-6
The Aloris Cxa 6 is a multiple tool holder designed for use with a 2-1/4 inch wedge-type tool post. This tool holder is engineered for lathes with a swing ranging from 13 to 18 inches. Technical include an overall height of 2-1/8 inches and a centerline height of 1-5/16 inches. The unit accommodates a tool bit range ...more
Aloris #CXA-6 Lathe Tool Post Holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: CXA-6
Spec Sheet:, Aloris CXA 6 Lathe Tool Post Holder, USED, Brand: Aloris, Part Number: CXA 6, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Multiple Tool Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2-1/8, Maximum Cutting Tool Size (Inch) 5/8, Centerline Height (Inch) 1-5/16, Series ...more
Aloris #DA, quick change tool post w/ holders, 5 piece set
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: DA
Spec Sheet:, Aloris DA Quick-Change Tool Post w/ Holders 5 Piece Set, USED, 5 pieces in all, Brand: Aloris, DA Quick-Change Tool Post, Comes With:, 1 DA1 Tool Holder, 1 DA2 Tool Holder, 1 DA4 Boring Bar Holder, 1 DA7 Blade Holder.
Aloris #DA-55, morse taper holder #5MT w/ Collis 60654 5x4MT Sleeve
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: DA-55
, Aloris DA 55 Morse Taper Holder #5MT, includes Collis 60654 5x4MT Sleeve. Used, dimensions: 5-1/2" L x 3-1/4" W, 1-5/8" centerline. Reliable tooling choice for precision setups., Spec Sheet:, Aloris DA 55 Morse Taper Holder #5MT w/ Collis 60654 5x4MT Sleeve, USED, Brand: Aloris, Part Number: DA55, Morse Taper Holder ...more
Aloris #DA4Q-3000, boring bar holder, Kennametal KM63-NCM-EF flange mount
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aloris
Model: DA4Q-3000
, Aloris DA4Q 3000 boring bar holder, used. Measures H:4.5", W:4.375", L:6"-9". Bore: 3", Wedge: 3.5". Includes Kennametal KM63-NCM-EF flange mount. Ideal for tooling applications., Spec Sheet:, Aloris DA4Q 3000 Boring Bar Holder w/ Kennametal KM63-NCM-EF FLANGE MOUNT, USED, Brand: Aloris, Part Number: DA4Q 3000 ...more
Aloris tool holders, (11) quick change parting tool holders (some with blades)
Smith Machinery Co | Ames, IA
Category: Tool Holders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Aloris
* (11) QUICK CHANGE PARTING TOOL HOLDERS (SOME WITH BLADES).
