51 - 90 of 90 listings
Metal Table Saw, 20" blade
Power Zone Equipment | Center, CO
Category: Table Saws
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Metal Table Saw
Brand/Model: Metal Table saw - : Used table saw, electric motor, 20in. Blade, piece cracked out of table top RPM.
Nanxing #MJK1132F1, sliding table saw, w/ prog rip fence, 2026
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nanxing
Model: MJK1132F1
Year: 2026
NANXING MJK1132F1 Sliding Table Saw w/Motorized Raise/Lower/Tilt & Programmable Rip FenceUp, down, and tilting of the main saw and scoring saw blades are controlled electrically by simply pressing buttons. The rip fence enables movement to the required position by inputting a number on a user-friendly touchscreen ...more
North Tech #NT-CS18L, up-cut table saw, 18" blade, 26" x27" table, 1" arbor, 10 HP, fence, 2012
Yoder Machinery Sales | Holland, OH
Category: Table Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: North Tech
Model: NT-CS18L
Year: 2012
SERIAL.10113, MODEL. NT-CS18L, YEAR NEW. 2012, DIAMETER OF BLADE. 18", ARBOR. 1", AREA OF TABLE. 26" X 27", DADO DIAMETER. 8", CUT ENEVOLPE. 1" X 13" X 12" X 4", MAXIMUM THICKNESS. 5", BLADE TO GUIDE EDGE. 14", CYCLES PER MINUTE. 45, PASSLINE HEIGHT. 34", BLADE GUARD. YES, HOLD DOWN STYLE. T CLAMP, FENCE. YES, MOTOR ...more
Northfield #4, Standard Saw, 3600 RPM arbor, 36" x 44" table, 32" capacity, new
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Model: 4
Northfield #4 Standard Saw rmation: Northfield Tilting Arbor Variety Saws are available in four different models, each of which is designed for a variety of uses Each model can accommodate saw blades from 14" to 18" The saw arbor can be tilted from 0 degrees to 45 degrees through a conveniently located hand wheel A ...more
Oliver #10040.001, Professional Table Saw, 10" blade, 5/8" arbor, w/ 36" rails, 1.75 HP, 4500 RPM, New
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10040.001
Oliver Model 10040.001 10" Professional Table Saw w/36" rails : Single Phase, 1.75HP Blade Diameter: 10" Arbor Diameter: 5/8" Blade Tilt: Left Arbor Speed: 4,500 RPM Maximum Depth of Cut at 90: 3-1/8" Maximum Depth of Cut at 45: 2-1/4" Maximum Width of Dado: 13/16" Maximum Cut to Right of Blade: 36" Maximum Cut to ...more
Get email updates for newly added Table Saws
Table Saws (also known as bench saws) are stationary cutting tools with a circular blade mounted beneath a flat work surface, allowing materials like wood, plastic, or metal to be cut precisely. Commonly used in woodworking, construction, and fabrication, they are ideal for tasks such as rip cuts, crosscuts, and bevels. Table saws are essential for achieving accurate, efficient cutting in a wide range of applications.
Oliver #10040.002, Professional Table Saw, 10" blade, 5/8" arbor, w/ 52" rails, 1.75 HP, 4500 RPM, New
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10040.002
Oliver Model 10040.002 10" Professional Table Saw w/52" Rail : Single Phase, 1.75HP Blade Diameter: 10" Arbor Diameter: 5/8" Blade Tilt: Left Arbor Speed: 4,500 RPM Maximum Depth of Cut at 90: 3-1/8" Maximum Depth of Cut at 45: 2-1/4" Maximum Width of Dado: 13/16" Maximum Cut to Right of Blade: 52" Maximum Cut to Left ...more
Oliver #4045, Table Saw, 12" blade, 48" x 52" cast iron table, 0°-45° tilting arbor w/ digital read out, 5 HP @ 3450 RPM, 220 Volt, 2026
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Oliver
Model: 4045
Year: 2026
OLIVER 4045 1-Phase 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.: -- 12" Blade capacity and 0 - 45 tilting arbor with digital read-out. -- 5 HP Motor at 3,450 RPM. -- Complete ...more
Oliver #4065.002, Table Saw, 52" Rail, 14" blade, 1" arbor, 3800 RPM, New
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 4065.002
Rail Length w/Side Table w/52" Rail Blade Diameter 14" Arbor Diameter 1" Blade Tilt Left Arbor Speed 3,800 RPM Maximum Depth of Cut at 90 5-1/8" Maximum Depth of Cut at 45 3-5/8" Maximum Width of Dado 11/16" Dado Diameter (Optional) 12" Max Dado Size: 12" Maximum Cut to Right of Blade 52" Rail Maximum Cut to Left of ...more
Oliver 4016, Table Saw, 5 HP, poly V-belt drive system, 2026, new
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Oliver
Year: 2026
OLIVER 4016 10" Table Saw, 5 HP, 3-Ph w/36" Rail : -- 5 HP motor; poly V-belt drive system with belts that run smoother and with less vibration, giving you the highest quality cut available. -- Top it all off with with OLIVER'S Optimus square tube fence and a digital blade angle readout system and you've got a ...more
Oliver 4045-5HP, Table Saw, 12" blade capacity, 45 degree blade tilt, 5 HP, 3450 RPM, 52" rip fence, 48" x 52" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Oliver
Year: 2026
OLIVER 4045 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.: -- 12" Blade capacity and 0 - 45 tilting arbor with digital read-out. -- 7.5 HP Motor at 3,450 RPM. -- Complete with: 52" ...more
Paoloni #P260, Sliding Table Saw, 6 HP, 230 V., 3ph, 12" blade, 51" rip fence, 1998
Wheeler Machinery Sales | Pomona, CA
Category: Table Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Paoloni
Model: P260
Year: 1998
1998 PAOLONI P260 Sliding Table Saw #7959 #1, -102 aluminum sliding table, -6HP main motor 230v 3phase electrics, -Tilting arbor with tilt scale in handwheel, -Cross cut fence with 2 flip stops, -12 blade capacity, -Scoring unit with lever adjustments, -Manual rip fence with 51 capacity with extension table, -Electric ...more
Powermatic #3000B, table saw, 7.5HP, 3Ph, 230/460V, 50" RIP, Accu-Fence, brand new
Nevins Machinery Concepts Inc | South Easton, MA
Category: Table Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 3000B
Style (Type) Cabinet, Blade Diameter (In.) 14, Arbor Diameter (In.) 1, Arbor Speed (RPM) 4500, Maximum Depth of Cut at 90 Degrees (In.) 5-1/8, Maximum Depth of Cut at 45 Degrees (In.) 3-1/2, Maximum Diameter of Dado (In.) 8, Maximum Width of Dado (In.) 13/16, Table in Front of Saw Blade at Maximum Depth of Cut (In.) ...more
JUST ADDED!
Powermatic #66, Cabinet Table Saw w/ Woodworking Shop Package, Accu-Fence system, Excalibur sliding table, 20" planer, MiniMax T-124 woodturning copy lathe, Powermatic 26 wood shaper
Heavy Wall Consulting | Long Beach, CA
Category: Table Saws
Seller: Heavy Wall Consulting
Location: Long Beach, CA
Mfr: Powermatic
Model: 66
Selling a complete, professional-grade woodworking and cabinet-making workshop as a single package deal. This lot is ideal for setting up a commercial shop, upgrading a home woodshop, or reselling., Included is a lineup of heavy-duty stationary machinery, precision Festool track saw and routing systems, and a complete ...more
Powermatic #66, table saw, 10" blade, 3 HP, Powermatric PF-41 feeder, fence & cart
Smith Machinery Co | Ames, IA
Category: Table Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Powermatic
Model: 66
MAXIMUM MOTOR SIZE ------------------------ 3 HP, TABLE SIZE W/ EXTENSIONS ------------------ 37-1/2 in X 28 in, TABLE SIZE W/O EXTENSIONS ----------------- 21-1/2 in X 28 in, RIP FENCE --------------------------------- 41.5 in X 4 in X 2.5 in, ARBOR DIAMETER ---------------------------- 5/8 in, MAXIMUM SPEED FOR SAW ...more
Powermatic #66, Tilting Arbor Table Saw, 28" x 38" table, 5/8" Arbor diameter, 10" Blade diameter, 4k RPM, 25" Rip Capacity, 3 HP, w/ saw fence, AS IS
Norman Machine Tool Ltd | Baltimore, MD
Category: Table Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Powermatic
Model: 66
Powermatic 10″ Tilting Arbor Table Saw, Inventory # 7471, Model: Model 66, S/n: 8466139, Table: 28″ x 38″, Diameter of Arbor: 5/8″, Diameter of Saw Blade: 10″, Max. Depth of Cut @ 90°: 3 1/8″, Max. Depth of Cut @ 45°: 2 1/8″, Speed: 4,000 RPM, Table Height: 34″ ...more
Powermatic #66, Tilting Arbor Table Saw, 10" blade, 5/8" arbor, 11000 SFM, 5 HP, 48" Fence, Dust Collector, Portable
Machinesused.com | Minneapolis, MN
Category: Table Saws
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Powermatic
Model: 66
The Powermatic 66 table saw is one of the most iconic and respected cabinet saws ever built for professional woodworking applications. Known for its massive cast-iron construction, smooth operation, and exceptional accuracy, the PM66 has long been a staple in industrial shops, cabinet manufacturing, schools, and ...more
JUST ADDED!
Powermatic #66, Tilting Arbor Table Saw, 10" blade, 28" x 38" table, 5/8" arbor, 3-1/8" depth of cut @ 90°, 25" rip, 4000 RPM, 3 HP, 230 V., 1 Ph.
Norman Machine Tool Ltd | Baltimore, MD
Category: Table Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Powermatic
Model: NO. 66
Powermatic 10″ Tilting Arbor Table Saw, Model No. 66 – SALE PENDING 09/16/2026, Inventory # 9848, Model: No. 66, S/N: 98661984, Table: 28″ x 38″, Diameter of Arbor: 5/8″, Diameter of Saw Blade: 10″, Max. Depth of Cut:, @ 90°: 3 1/8″, @ 45°: 2 1/8″, Speed: 4,000 ...more
Samco #Formula-S1, Sliding Table Saw, 10' Saws, 12" Blade, 600 V, 1999
Machine Tool Bids | Chicago, IL
Category: Table Saws
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Samco
Model: FORMULA S1
Year: 1999
Used 1999 Samco Formula S1. Machine Tool Bids offers plenty of 10' Woodworking Panel Saws and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Samco Formula S1 or any of our machines., MACHINE, Panel Saw: 10, Sliding Table Saw: 10', Blade: 12", Voltage: ...more
Sawstop #10, Industrial Table Saw, 10"
Carolina Machinery Sales | Monroe, NC
Category: Table Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sawstop
Model: 10
Sawstop 10" Table Saw.
JUST ADDED!
Sawstop #ICS53230, industrial cabinet saw, 10" blade, 34" x 84" capacity, 5 HP, 4000 RPM
HGR24 | Euclid, OH
Category: Table Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Sawstop
Model: ICS53230
5 HP, 12 AMPS, 4000 RPM.
JUST ADDED!
Sawstop #ICS53230, industrial cabinet saw, 10" blade, 34" x 84" capacity, 5 HP, 4000 RPM, AS IS
HGR24 | Euclid, OH
Category: Table Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Sawstop
Model: ICS53230
MISSING A LEG, 5 HP, 12 AMPS, 4000 RPM.
JUST ADDED!
SawStop #ICS53480, Industrial Cabinet Table Saw, 10" blade, 5 HP, 30" x 44" table, T-slot miter gauge, 480 V., 3 Ph.
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sawstop
Model: ICS53480
Main Motor: 5 HP, 480v, 3ph Blade Diameter: 10" Table Size: 30" x 44" T-Slot Miter Gauge Manual Hand-Cranks for Blade Height & Tilt Serial #: 1243801755.
JUST ADDED!
Sawstop #ICS73480, industrial cabinet saw, 10" blade capacity, 7.5 HP, 3450 RPM, 480 V., 3 Ph.
HGR24 | Euclid, OH
Category: Table Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Sawstop
Model: ICS73480
9 A, 7.5 HP, 3450 RPM, MADE IN TAIWAN.
SawStop, Compact Table Saw, 15A, 120 V., 60Hz, 10", new
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sawstop
Compact Table Saw 15A,120V,60Hz The SawStop Compact Table Saw s SawStop's patented safety system with the mobility you need to work from anywhere at home or on the job site. With a 10" blade and durable construction, you'll have the power and accuracy you need. SawStop's patented Safety System stops on ...more
SCM #SI-350-E, sliding table saw, programmable, motorized blade adjustments, powered rip fence positioning, 2003
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: SI-350-E
Year: 2003
SCMI - SI 350 E: Sliding Table Saw with Motorized Blade adjustments and powered Rip Fence positioning -- 3,200 mm (126") Stroke length; anodized aluminum 14-1/4" wide sliding table; 2-position table locks for easy panel loading in any position. -- 45 Tilting; 1" dia. main saw arbor; 350 mm (13-3/4") blade dia. cap. -- ...more
SCM #SI-350-E, sliding table saw with programmable fence, powered tilt/height adjustment, 2003
Equipment Hub | Decatur, GA
Category: Table Saws
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Scm
Model: SI-350-E
Year: 2003
Stock #: 190260002, Location: Decatur, GA, Brand: SCM, Model: SI 350 E, Serial #: AB/159493, Year: 2003, Approx. Shipping Weight: 3,000 Lbs., Approx. Shipping Dimensions: 14' L x 8'6" W x 5' H, Skidding Fee: Skidding Unavailable, Cutting Length(Stroke): 126", Max Saw Blade Diameter: ...more
SCM #SI-400-E, programmable sliding table saw, motorized adj., 2007
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: SI-400-E
Year: 2007
CMI - SI 400 E: Sliding Table Panel Saw with motorized adjustmentsSliding Table Panel Saw with Motorized Blade adjustments and powered Rip Fence positioning. -- 3,200 mm (126") Stroke length; anodized aluminum: 14-1/4" Wide sliding table; 2-position table locks for easy panel loading in any position. -- 45 Tilting - ...more
JUST ADDED!
SCM #SI300-Nova, Sliding Table Saw, 10' sliding table, 12" main blade, 3.9" cutting height, TigerStop rip fence, 600 Volt, 2007
Brighton Woodworking Machinery | Uxbridge, ON
Category: Table Saws
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Scm
Model: SI300-NOVA
Year: 2007
The 2007 SCM SI300 Nova is a used 10ft sliding table saw ideal for precision woodworking. Noted for its very good condition, the machine comes a TigerStop motorized rip fence to ensure accurate cuts and enhanced productivity. Its sliding table boasts a substantial travel stroke of 3200 mm, allowing for the handling of ...more
JUST ADDED!
SCM #SI400-Nova, Sliding Table Saw, 10.5' sliding table, 51" rip capacity, 15.75" saw blade diameter, 5" cut @ 90°, adjustable split scoring blade, 10 HP, 600 Volts, 3PH, 2015
Brighton Woodworking Machinery | Uxbridge, ON
Category: Table Saws
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Scm
Model: SI400-NOVA
Year: 2015
The 2015 SCM SI400 Nova is a robust, professional-grade sliding table saw designed for precision cutting in woodworking applications. Featuring a 10-foot sliding table, it is ideal for handling large panels and solid wood. The saw excels in cutting depth, with a maximum of 5 inches at a 90-degree angle and 2-3/4 ...more
SCM #minimax-sc-2c, Circular Saw w/ Tilting Blade, 2022
Lenmark Industries | Langley, BC
Category: Table Saws
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Scm
Model: MINIMAX-SC-2C
Year: 2022
SKU: 152121, Model: minimax sc 2c, Year: 2022, Condition: Used, S/N: KK00034635, Horsepower: 3.4 hp, Table Size: 1020 x 325 mm, Blade Diameter: 315 mm, Voltage: 220 volts, Phase: Single-phase, Saw Type: Sliding Saw, Dimensions: 35.00 (H) x 36.00 (W) x 75.00 (L) inches, Additional :, Max. sawblade diameter: 315 mm // ...more
12" SCMI #Mini-Max, Table Saw, 7.5 HP, 230 V., 3ph
Carolina Machinery Sales | Monroe, NC
Category: Table Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: MINI-MAX
SCMI Minimax Table Saw, 12”. 7.5 hp. 230 volt 3ph, Cabinet saw.
16" SCMI #S-40, Sliding Table Saw, 12 HP, 230 V., 3ph, 12' 6" range
Carolina Machinery Sales | Monroe, NC
Category: Table Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: S-40
SCMI F 40 Sliding Table, Manufacturer's (to be confirmed), 12 hp 230 volt 3 ph, 16” blade capacity, Power up/ down and power fence movement., 12′-6” slide ability, In great condition everything works! No problems.
Shopfox #W1811, 10" sliding table saw, 2021
iBid Machinery | Roswell, GA
Category: Table Saws
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Shopfox
Model: W1811
Year: 2021
Product : 2021 Shopfox W1811 10" Sliding Table Saw, Machine Location State: Ohio, Machine Location City: Mansfield, Year: 2021, Make: Shop Fox, Model: W1811, Serial No: 21120130, Phase/Voltage: 1 PH See plate in photos for confirmation, Condition: Very Good Used Condition, Any Known Issues: No, In Production: ...more
Silver #SF-45A, sliding table saw, 10', 8.5 HP, locks for easy panel loading in any position, 2010
Brighton Woodworking Machinery | Uxbridge, ON
Category: Table Saws
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Silver
Model: SF-45A
Year: 2010
2010 Silver SF-45A Used sliding table sawFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing information.Click ...more
Steel City #35635, industrial cabinet table saw, 7.5 HP, heavy duty trunnions, Open Box, Unused/Never powered
10 Blade Pro Machinery Llc | Fontana, CA
Category: Table Saws
Seller: 10 Blade Pro Machinery Llc
Location: Fontana, CA
Mfr: Steel City
Model: 35635
✅ Freight-Damaged Unit, Dent in the metal base. Does not effect machine function, Core, Blade Size: 12” Motor: 7.5 HP, industrial TEFC motor Voltage: 230V Phase: 1‑phase (factory configuration) Arbor Size: 1” Arbor Speed: ~4,200 RPM Cutting Height: ~4” at 90° (12” blade advantage) Blade ...more
JUST ADDED!
Tannewitz #U, Heavy Duty Table Saw, 16" blade, 16" rip capacity
S and R Machines | Bristol, CT
Category: Table Saws
Seller: S and R Machines
Location: Bristol, CT
Mfr: Tannewitz
Model: U
The Tannewitz #U 16" H.D. Table Saw is a manual, electric-powered table saw with a blade diameter of 16 inches. It is specifically designed for woodworking tasks, with a rip capacity of 16 inches. The model U is known for its durability and precision, making it a reliable tool for professional woodworking projects. ...more
Tannewitz #XJ, table saw, 16" blade, 5 HP, 3600 RPM, 42" x 45" table, tilting arbor
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Tannewitz
Model: XJ
TANNEWITZ - XJ: Table Saw with Tilting Arbor -- 5 HP - 3,600 RPM Fan cooled motor; 1" right tilting arbor; 42" x 45" table size. -- Base formed from: Hot rolled steel; 5/16" thickness; welded into: (1) Solid unit; 10" dia. handwheels for easy & smooth adjustment of tilting; raising & lowering of arbor. -- Saw ...more
Saw Stop #ICS53480, Table Saw, 5 HP, 10" blade, unused, 2019
Carolina Machinery Sales | Monroe, NC
Category: Table Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: ICS53480
Year: 2019
Model ICS53480, Blade 10 in (254 mm), Motor 5 HP, Electrical 480 V, 3-phase, Certification CSA, Fence system T-Glide Industrial Series II, P/N TGI2-FA, (separately boxed), Safety system SawStop skin-detection blade brake, Net weight 249 kg (549 lb), Gross weight 299 kg (659 lb), Volume 33.87 cu ft, Condition: New ...more
Robland #Z-320, sliding table saw, 126" crosscut capacity, 16" blade, 7.5 HP, 5000 RPM
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: Z-320
ROBLAND Z 320 Sliding Table Saw: -- 126" Crosscut capacity with swing arm support and scoring capability. 16" Max. saw blade with a 3-3/4" max scoring blade. -- 7.5 HP Main saw motor, 0.75 HP scoring motor, (3) blade speeds of 3,000, 4,000 & 5,000 RPM. -- 60-1/4" x 27-1/2" Main table and a 15-3/4" x 125-3/4" ...more
Moving Gantry Table Saw, 35" x 23-3/4" table, 9-1/2" under rail, 8" blade, 8000 RPM, automatic lube system, PC controller
Machinery Works Inc | Belgium, WI
Category: Table Saws
Seller: Machinery Works Inc
Location: Belgium, WI
Year: 2018
Manufacturer N/A Model N/A Condition Used Stock Number 3508 Table Size 35" x 23-3/4" Under Rail 9-1/2" Blade Size 8" Max. RPM 8,000 RPM Travels 51" x 41" x 19".
