1 - 50 of 86 listings
40/100 GPM @ 25/31' TDH, Nagle #TWO-RS-80-OR, 2" cantilever slurry pump, 5 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagle
Model: TWO-RS-80-OR
SKU: 27065, Model: TWO-RS, Condition: Used, S/N: B7-1071, Horsepower: 5 hp, GPM: 40/100, Head: 25/31 ft., RPM: 1050 rpm, Made In: UNITED STATES, Dimensions: 2.50 (H) x 3.00 (W) x 7.00 (L) inches, Additional :, Size: 2".
135 GPM @ 33' TDH, Nagel #CWO-CS71-OQ, submerisble slurry pump w/10 HP motor, 2.5"
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagel
Model: CWO-CS71-OQ
SKU: 27062, Model: CWO-CS, Condition: Used, S/N: A7-1351, Horsepower: 10 hp, GPM: 135, Head: 33 ft, RPM: 1290 rpm, Electrical :, Voltage: 240/480 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 48.00 (H) x 34.80 (W) x 93.60 (L) inches, Additional :, Size: 2.5", Casing: Split casing design.
135 GPM @ 43' TDH, Nagle #CWO-CS71-OQ, submersible slurry pump with 10 HP motor
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagle
Model: CWO-CS71-OQ
SKU: 27064, Model: CWO-CS, Condition: Used, S/N: B8-1170, Horsepower: 10 hp, GPM: 135, Head: 43 ft., RPM: 1632 rpm, Electrical :, Voltage: 240/480 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 2.80 (H) x 4.00 (W) x 7.50 (L) inches, Additional :, Size: 2.5".
JUST ADDED!
200 GPM @ 80' TDH, Warman #4SA45272RC6077, Slurry Pump, 4" discharge, 24 HP, 1200 RPM, 460 Volts, abrasion resistant, (3 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Warman
Model: 4SA45272RC6077
Model: 4SA45272RC6077Condition: New Surplus4in. DischargeLength: 72in. Pump LegRated @ 200 GPM, 80ft HeadMetal Liners and ImpellersDouble Suction Semi-Open ImpellerCantilever Shaft DesignDual Volute Casing DesignAbrasion ResistantMotor anand Drive24 hp Motor460 Volt1200 RMpDirect-CcoupledWeight: 3,229lbs3 Units ...more
JUST ADDED!
220 GPM @ 80' TDH, Galigher, Slurry Pump, 11" neoprene impeller, 2-1/2" suction x 2" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Galigher
Capacity range: 60 gpm - 220 gpm.20 ft. - 80 ft. head.Rubber (Neoprene) lined.Rubber (Neoprene) impeller. 11 inch Dia.2.5 inch inlet.2 inch discharge.Flanged connections.Standard stuffing box With graphite packing sealing arrangement.Complete with overhead motor base., View Spec Sheet BelowLocation: British Columbia ...more
Get email updates for newly added Slurry Pumps
Slurry Pumps (also known as sludge pumps) are heavy-duty pumps designed to transport mixtures of liquids and solids, such as sand, coal, or ore. Commonly used in industries like mining, construction, and wastewater treatment, they are ideal for handling abrasive, high-viscosity, or corrosive slurries. Slurry pumps are essential for efficient material transport in challenging environments requiring durability and reliability.
300 GPM @ 40' TDH, GPM #SBLH4S15-6T5, heavy duty submersible low head slurry pump, 15 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Gpm
Model: SBLH4S15-6T5
SKU: 108229, Model: SBLH4S15-6T5, Condition: Used, S/N: 3741, Horsepower: 15 hp, GPM: 300, Head: 40 ft., RPM: 1200 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 62.00 (H) x 20.00 (W) x 32.00 (L) inches, Additional :, Discharge: 4", Suction: 6", Power: 15HP (11kW) ...more
JUST ADDED!
325 GPM @ 410' TDH, Toyo #DBH-100/75-MDHM, High Chrome Slurry Pump, 4" suction x 3" discharge, 100 HP, 575 Volts, 2005, (4 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Toyo
Model: DBH 100/75 MDHM
Year: 2005
Model: DBH 100/75 MDHMYear: 2005Qty: 4Baldor 100 HP Motor 575 Volt 1785 RPMPump Driven withPump Base and Guard Flow: 325 US GPM, 410 ft. HeadMechanical Seals Rotation Counter Clockwise 19.7 in. Diameter ImpellerMax Solid Size.652Location: British Columbia, Canada.
JUST ADDED!
400 GPM @ 375' TDH, Krebs #MM100, MillMAX Slurry Pump, 4" inlet, 3" outlet, 50 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM100
400 GPM @ 375 ft. head (approx.).Model: MM100.Inlet: 4 in.Outlet: 3 in.Driven by 50 HP motor.Fully guarded. Please contact us for more information..
JUST ADDED!
400-1500 GPM, Warman, GP Series Slurry Pump, 4" inlet x 4" discharge, rubber lined, 0-60 psi, size 100, motor base
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Warman
GP Series Size: 100Frame: "C" Rubber Lined Fiber Reinforced Resin Outer Casing 4 in. Dia. Flanged Inlet and Discharge Flow Range: 400 - 1500 GPM 0 - 60 PSI Comes with Overhead Motor Base, View Spec Sheet Below, Located: British Columbia, Canada.
JUST ADDED!
500 GPM @ 110' TDH, ASH Pump Envirotech #A-6-5, Slurry Pump, 47 psi, 4" suction x 3" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Model: A-6-5
Type A-6-5. Size: 4 x 3.150 - 500 gpm.Head up to 110 feet (47 psi.). Comes with overhead motor base., View Spec Sheet Below Shipping information:, Dimensions (L x W x H): 36 in. x 22 in. x 38 in.91 cm x 56 cm x 97 cm. Please contact us for more information..
500 GPM @ 130' TDH, ITT Goulds #JC, Pump, High Chromium, 3" x 6" -18" Size, 16.375" Impeller diameter, 113 psig, 1180 RPM, 2024
West TN Surplus | Halls, TN
Category: Slurry Pumps
Seller: West TN Surplus
Location: Halls, TN
Mfr: Itt
Model: JC
Year: 2024
The 3x6-18 Goulds JC Pump HC600 is a high-quality pump manufactured by ITT Goulds Pumps. This pump is designed to provide reliable and efficient pumping solutions for various industrial and commercial applications. Its durable construction and innovative design make it a popular choice for businesses looking for ...more
JUST ADDED!
600 GPM @ 120' TDH, Toyo #DBH-150/125, Slurry Pump, 6" suction x 5" discharge, 1250 RPM, 15.7" impeller diameter, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Toyo
Model: DBH-150/125
Flow: 600 USGPMSpeed: 1250 RPMHead: 120 ft. Max Soild Size: 1.25 in.Impeller: Steel 15.7 in. Dia.Qty: 2Location: British Columbia, Canada.
770 GPM @ 340' TDH, Goulds #5500, severe duty slurry pump, Carbon Steel, 250 psi @ 70°F, B4 frame, 4x6-29, 27.5" imp diameter
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500
Brand: GOULDS, Condition: USED, "AS-IS", Model: 5500, Size: 4 x 6 - 29, Serial: 445A663, Material: CARBON STEEL, Motor Rating: 770 GPM, 1130 RPM, 1.01 S.G., 340 FT HD, 250 PSI @ 70 DEGREE F MAX ALLOW PRESS, Weight: 6,000 LBS., Category: PUMPS, ERC #: MO-2591, Job #: 065, Additional Notes: IMP DIA: 27.5", B4 FRAME ...more
770 GPM @ 340' TDH, Goulds #5500.B4.4X6-29, severe duty slurry pump, 4" top inlet/outlet, 8" side inlet/outlet
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500.B4.4X6-29
Brand: GOULDS PUMPS, Condition: USED, "AS-IS", Model: 5500.B4.4X6-29, Style: -, Serial: 444A420, Power Rating: 770 GPM, 1180 RPM, 1.01 S.G., 340 FT. HD., 27.5 IMP. DIA., 250 MAX. ALLOW. PRESS. PSI @ 70 DEG. F, Weight: 6500 LBS., Shipping Dimensions: 48" x 105" x 55", Category: PUMPS, ERC #: MO-2976, Job #: 065 ...more
JUST ADDED!
900 GPM @ 240' TDH, Worthington #M3-183, Slurry Pump, 4" inlet x 3" discharge, hard metal wear plates & impeller, (3 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Worthington
Model: M3
Size: 4 in. x 3 in.Model: M3-183Hard metal wear plates and impeller.Approx. 350 GPM @ 300 ft. head.Approx. 900 GPM @ 240 ft. head.3 units available.
JUST ADDED!
1200 GPM @ 25' TDH, Galigher #4VRA1000, Centrifugal Slurry Pump, 25-30 HP, 6" suction x 4" discharge, 75 psi, rubber lined, 208-230/460 Volts, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Galigher
Model: 4VRA1000
6in x 4in Galigher Centrifugal Pumps, Qty: 2 Units, Make: GaligherModel: 4VRA1000Suction: 6inDischarge: 4inCondition: Used, Reported in Excellent ConditionLiners: Rubber Lined Approx. 400 Hours Since NewFlow Rate: 600-1200 GPMHead: 25ftMax Working Pressure: 75 PSI, View Spec Sheet Below, Drive: Baldor or Toshiba ...more
1400 GPM @ 80' TDH, Lawrence #KA01-06-EE92381, vertical cantilever submersible slurry pump
Deal Makers Machinery | Thousand Oaks, CA
Category: Slurry Pumps
Seller: Deal Makers Machinery
Location: THOUSAND OAKS, CA
Mfr: Lawrence
Model: KA01-06-EE92381
JUST ADDED!
2000 GPM @ 350' TDH, Krebs #MM200, MillMAX Slurry Pump, 8" suction x 6" discharge, 100 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
2000 GPM @ 350 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in.Driven by 100 HP motor.Fully guarded. Please contact us for more information..
JUST ADDED!
2000 GPM @ 375' TDH, Krebs #MM200, Slurry Pump, 8" inlet, 6" outlet
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
Model MM2002000 GPM @ 375 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in. No MotorLocation: Eastern USA.
JUST ADDED!
2000 GPM @ 375' TDH, Krebs #MM200, MillMAX Slurry Pump, 8" suction x 6" discharge, 75 HP, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
Condition: Used2000 GPM @ 375 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in.Driven by 75 HP motor.Fully guarded. Please contact us for more information..
2400 GPM @ 92' TDH, Eliminator #SBLH8S150-6T5, Slurry Pump, 150 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Eliminator
Model: SBLH8S150-6T5
SKU: 142973, Model: SBLH8S150-6T5, Condition: Used, S/N: 2931, Horsepower: 150 hp, GPM: 2400, Head: 92 FT, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 36.00 (H) x 60.00 (W) x 96.00 (L) inches.
JUST ADDED!
2500 GPM @ 240' TDH, Warman #8/6-AH, Slurry Pump, 8" inlet x 6" outlet, 100 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Warman
Model: 8/6 AH
Inlet: 8 in. (200 mm).Outlet: 6 in. (150 mm).Model: 8/6 AH.Max. capacity: 2500 GPM.Max. head: 240 ft.Driven by 100 HP motor.Please contact us for more information..
3784 GPM @ 243' TDH, Warman #5800-600-1200, Submersible Slurry Pump, 33 m @ 1.0 S.P. Submergence, 306 HP, 1192 RPM, 4000 V, 2012
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Warman
Model: 5800-600-1200
Year: 2012
SKU: 114733, Model: 5800-600-1200, Year: 2012, Condition: Used, Horsepower: 306 hp, GPM: 3784, Head: 74m, RPM: 1192 rpm, Electrical :, Voltage: 4000 volts, Phase: 3-phase, Additional :, s:, - Twin-volute design casings., - No external cooling for the motor is required., - Seal is subjected to submergence pressure ...more
JUST ADDED!
3800 GPM @ 240' TDH, Metso #HM200, Slurry Pump, metal lined, 8" suction x 6" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Metso
Model: HM 200
3800 GPM @ 240 ft. head (approx.).Metal lined.Model: HM 200.Inlet: 8 in. (200 mm).Outlet: 6 in. (150 mm).Bare pump only..
JUST ADDED!
ASH Pump Envirotech, Centrifugal Slurry Pump, 2" suction x 2" discharge, 1-1/4" shaft
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: A-S-H - Envirotech
ASH 2in x 2in Slurry Pump, Make: A-S-H - EnvirotechType: Centrifugal Slurry PumpCondition: Used ConditionSize: 2in x 2inSuction Inlet: 2in Dia. Mounting Holes: 4.5in Center to CenterDischarge Outlet: 2in Dia.Shaft: 1.25in Dia., Overall Dimensions:, Length: 27inWidth: 16inHeight: 20in, Location: Savona, British ...more
JUST ADDED!
ASH Pump Envirotech #D-6-5, Slurry Pump, 14" suction x 12" discharge, rubber lined, new rubber impeller
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: A-S-H Pump Envirotech
Model: D-6-5
Manufacturer: A-S-H Pump EnvirotechPump Type: D-6-5Style: ASH Slurry PumpLiners: Rubber LinedImpeller: New Rubber ImpellerSuction: 14in DiameterDischarge: 12in DiameterOverhead Motor Mount, Location: Western Canada.
JUST ADDED!
ASH Pump Envirotech, Rubber-Line Slurry Pump, 4" suction x 3" discharge, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Inlet: 4 in.Outlet: 3 in.Rubber lined.With OHMB.Quantity: 2.(1 pump includes guard).Location: Central, USA.Contact for more information., View more Slurry Pumps.
JUST ADDED!
ASH Pump Envirotech, SRH Slurry Pump, 5" suction x 4" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Completed with: OHMBGuardMech SealLocation: Western USA.
JUST ADDED!
ASH Pump Envirotech, SRC Centriseal Slurry Pump, 2-1/2" suction x 2" discharge, 7.5 HP, 575 V., 1755 RPM
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Suction: 2.5 in. Discharge: 2 in.Rubber LinedWater Pump Packing Overhead Motor BasePump Type: 2.5x2 SRC Centriseal Motor and Drive Reliance 7.5 HP Motor 575 Volt 1755 RPMLocation: British Columbia, Canada.
Ash Pump with 100 HP (74 kW) motor, Type B-6-6, (3 available) units
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ash
Type B-6-6 Ash Pumps with 100 HP (74 kW) motor, - Three units available..
JUST ADDED!
Denver, Slurry Pump, 15 HP, 1760 RPM, 550 V., 3PH, 1760 RPM, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Denver
Electric Motor15 HP550 Volt60 Hz3 PhaseRPM: 1760Frame: 284U2 Units AvailableLocation: British Columbia, Canada.
JUST ADDED!
Dynapro #HDSP-10X8-27, Centrifugal Slurry Pump, 27" diameter impeller, 10" suction x 8" discharge, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Dynapro
Model: HDSP 10X8-27
Dynapro 10in x 8in HDSP Slurry Pump, Make: DynaproModel: HDSP 10X8-27Type: Centrifugal Slurry PumpCondition: Used ConditionSize: 10x8Suction Inlet: 10in Dia.Discharge Outlet: 8in Dia.Impeller: 27in Dia., Location: Eastern Canada.
FLSmidth #Krebs-RM250 millMAX Slurry Pump, stored indoors, rebuilt
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth
Model: KREBS-RM250
FLSmidth Krebs RM250 millMAX Slurry Pump-Rebuilt pump in good condition, - Bare pump, - Stored indoors, - Immediately available, millMAX Design which includes:, -Increased wear life, -Lower power consumption, -Increased mill throughput, -More consistent hydrocyclone separations, -Reduced cost-per-ton pumped, -Great ...more
JUST ADDED!
Furukawa #SPF-2Stage, High Pressure Slurry Pump, 2-1/2" suction x 2" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Furukawa
Model: SPF 2 STAGE
Used Furukawa Slurry Pump.Model: SPF 2 Stage.2.5 in x 2 in.High Pressure.1 complete pump available..
Galigher Style Series 1000, vertical slurry pump, totally sealed bearings, bottom box & top plate coated in vulcanized rubber, new
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 1000
- Galigher Style pumps interchangeable with Series 1000, - Totally sealed bearings, - Bottom box and top plate coated in vulcanized rubber, - Semi-open impeller coated with abrasion-resistant polyurethane, - 4140 steel shaft, Belt guards, - Supplied with one coat primer and two coats machine enamel, - Motors, sheaves ...more
Galigher Style Series 5000, vertical slurry sump pump, natural rubber wear parts, heavy duty bearing assembly, new
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 5000
- Galigher style vertical sump pump, - Interchangeable with original Galigher pumps, - 5,000 series heavy duty pumps, - Natural rubber wear parts, - Heavy duty bearing assembly and mechanical components, - Belt guard and motor baseplate, - Discharge pipe, - Pulley, motor, and belts available separately, - Made in ...more
Goulds #5500, 8 x 10 slurry pump, 400 HP, 1785 RPM, 460 V.
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500
Brand: GOULDS, Condition: USED, AS-IS, Model: 5500 8X10, Type: -, Serial: -, Power Rating: 400 HP, 1776 RPM, 449T FRAME, SIZE: 8 X 10, Weight: APPROXIMATELY 9,000 LBS., Category: PUMPS, Shipping Dimensions: 50" x 102" x 81", ERC #: MO-4954, Job #: 116, Additional Notes: MAY NEED TO REPLACE ELECTRIC MOTOR.
Krebs #D6B-12-838 Cyclone, (8 available) units
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Krebs
Model: D6B-12-838
3 units available, SPARE PARTS (Additional Cost):, - 4 each - Inlet Head Liners, - 4 each - Liner Top Cover Plate, - 4 each - Cylinder Liner, - 4 each - Skirt - Urethane, - 4 each - Apex Insert, - 4 each - Urethane Skirt, - 10 each - Inlet Adapter, - 10 each - O Flow Adapter, - 3 each - Inlet FLGD Adapter, - 4 each - ...more
JUST ADDED!
Krebs #MM150, Slurry Pump
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM150
MM 150No MotorMotor MountLocation: Eastern USA.
JUST ADDED!
Krebs #MM200HH, Centrifugal Slurry Pump, 8" suction x 6" discharge, metal lined
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200HH-HIGH HEAD
Krebs 8in x 6in MM200 Centrifugal Slurry Pump, Make: KrebsModel: MM200HH - High HeadType: Centrifugal Slurry PumpSize: 8x6Condition: Unused Surplus ConditionSuction Inlet: 8in Dia.Discharge Outlet: 6in Dia.Liners: MetalImpeller Construction: MetalFrame: MMC, Location: Western Canada.
JUST ADDED!
Krebs #MM250C4, Centrifugal Slurry Pump, 10" suction x 8" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM250 (MILLMAX MM250C4)
10in x 8in Krebs MM250 Centrifugal Slurry Pump, Make: KrebsModel: MM250 (millMAX MM250C4)Type: Centrifugal Slurry PumpCondition: Unused SurplusSuction: 10in Dia.Discharge: 8in Dia. Power Frame: MMC, Location: Western Canada.
JUST ADDED!
Krebs #RM250-B53U12293, SlurryMax Slurry Pump, 10" suction x 8" discharge, rubber impeller, 250 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: RM250-B53U12293
Krebs SlurryMax RM250 10x8 Slurry Pump, Make: KrebsModel: RM250-B53U12293Type: SlurryMax Slurry PumpCondition: UnusedSuction: 10in (250mm)Discharge: 8in (200mm)Impeller: Rubber 5-Vane Closed ImpellerDrive: 250HP Max (Not Included)Power Frame: MMB, Location: Western Canada.
Krebs Millmax #GM200-C33U, Slurry Pump
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Krebs Millmax
Model: GM200-C33U
SKU: 108228, Model: GM200-C33U, Condition: Used, Dimensions: 54.00 (H) x 42.00 (W) x 68.00 (L) inches.
Linatex Slurry Pumps, 10 x 10 in
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Linatex
10x10 Linatex Slurry Pumps, - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves.
Metso #HM150-LHC-D, 6" x 4" slurry pump, 25 HP motor & frame, 1175 RPM, 460 V.
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Metso
Model: HM150-LHC-D
Brand: METSO, Condition: USED, "AS-IS", Model: HM150 LHC-D, Type: SLURRY, Serial: 200332-013-2, 590341, RJ-061307-2, Power Rating: 25 HP, 1175 RPM, 460 VOLT, 30.2 AMP, 60 HZ, 3 PHASE, Weight: 2,600 LBS. APPROXIMATELY, Category: PUMPS, ERC #: RX-3633, Job #: 047, Additional Notes: 6" INLET, 4" OUTLET. SHIPPING ...more
JUST ADDED!
Metso #HM200 housing, 8x6, 400 Stainless Steel material, PDCH2035
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Metso
Model: HM200
Brand: METSO, Condition: USED, AS-IS, Model: HM200, Serial: PDCH2035, Type: -, Power Rating: -, Weight: 814 LBS., Category: PUMPS, Shipping Dimensions: 48" x 40" x 24", ERC #: MO-4951, Job #: 116, Additional Notes: 8x6 HOUSING, 400 SS SERIES MATERIAL.
Metso #MM400-FHC-S-C5, slurry pump, 500 HP, 1188 RPM, 460 V., 555 amps, 15" inlet, 13" outlet
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Metso
Model: MM400-FHC-S-C5
Brand: METSO, Condition: USED, "AS-IS", Cat: MM400 FHC-S C5, Type: -, Serial: 302127071.0101, Power Rating: INLET: 15", OUTLET: 13" MOTOR: 500 HP, 1188 RPM, 460 V, 555 A, 5808B FRAME, Weight: APPROX. 15000 LBS, Category: PUMPS, Shipping Dimensions: 116" x 80" x 60", ERC #: MO-4797, Job #: 109, Additional Notes: ...more
JUST ADDED!
Metso Outotec #MR350, Centrifugal Slurry Pump, 14" suction x 12" discharge, 422 HP, 400 Volts, 50 Hz., 2022, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Metso
Model: MR350
Year: 2022
Metso 14in x 12in MR350 Slurry Pump, Quantity: (2) Units Available, Make: Metso OutotecModel: MR350Type: Centrifugal Slurry PumpYear: 2022Condition: Unused, Surplus ConditionSize: 14x12Suction Inlet: 14in Dia. (350mm)Discharge Outlet: 12in Dia. (300mm), Drive: ABB Electric Motor Power Output: 315kW (422HP)Voltage: 400 ...more
Metso #SRL-8x6 CHR Slurry Pump With Hastelloy, Denver type pump, 8" x6", new
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: SRL-8X6
8 x 6 CHR Metso SRL With Hastelloy Slurry Pump, - New in the crate, - Denver-style pump, - 8" x 6 ", - Model: SRL, - Includes corrosion-resistant nickel alloy Hastelloy, - Motor available separately, - Bare pump immediately ready to ship.
JUST ADDED!
Metso Thomas, Simplicity Slurry Pump, 1300 HP CAT engine, 16" pump inlet, Dredge style, metal lined
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Metso
Metso Thomas Simplicity Slurry Pump. Size: 16 in. Dredge style. Bare pump.Metal lined.Previously driven by 1300 hp CAT engine (not included).Reported to be in good condition., Please contact us for more information..
