51 - 83 of 83 listings
40000 lb. Comeq Stamco, recoiler, 60", 20" x 24" drum diameter, 68" drum face, hydraulic strip clamp
Universal Tube & Rollform | Perrysburg, OH
Category: Recoilers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Comeq
UTUBE NUMBER: 3608, MANUFACTURER: COMEQ STAMCO, Maximum Coil Weight: 40,000 Lbs., Drum Diameter: 20″ x 24″, Drum Face: 68″, Gripper Slot: 67″, 49″ to Top of Mandrel, Main Gear Box Ratio: 24:1, Hydraulic Strip Clamp, Hydraulic Push Off, Pneumatic Overarm Separator, 53″ Length, Gear ...more
40000 lb. Loopco Recoiler, 54" wide, 16" diameter Drum, 20" & 22" Pads, 200 HP, hydraulic clamp & expansion, 1974
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
Year: 1974
-40,000# Capacity, -54" Wide, -16" Dia. x 58" Face Drum, -20" Dia. Bolt On Pad, -22" Dia. x 57" Face Spare Drum, -Hydraulic Clamp and Expansion, -12" Dia. Main Shaft, -Hydraulic Pushoff, -Lufkin (2) Speed Gear Box w/10.6:1 and 31.7:1 Ratios, -200 HP DC Motor, 500/2000 RPM, 500 V w/Blower, -Air Operated Holding Brake ...more
40000 lb. Paxson, recoiler, 20" diameter x 64" face drum, 10.5" diameter main shaft, hydraulic pushoff, powered clamp & expansion
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
-Capacity: 40,000 lb. x 60", -20" Dia. x 64" Face Drum, -Powered Clamp & Expansion, -Gripper opens to 0.312", -10.5" Dia. Main Shaft, -Hydraulic Pushoff, -Overarm Separator, -Passline: 34.5" from Floor to Center of Drum, -50 HP DC Motor, 1750 RPM, 550V, with Electric Holding Brake, -Main Gearbox w/40:1 Ratio ...more
40000 lb. Yoder, 64" drum, 20" ID, 125 HP AC motor, ABB drive, 17.42:1 ratio
Met-Pro Machinery Inc | Detroit, MI
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Yoder
, Recoiler, S/N: Y5740-770, 40,000# Capacity, 20" ID x 64" face Drum, Manual grip and expansion, Hydraulic push-off, Floor to center line of Drum: 41.5", OD: 72" (44" radius from CL of Drum to Over Arm Shaft, 50" Separator shaft, 125 HP ABB AC motor, 1783 RPM with ABB Drive ...more
40000 lb. Yoder, Recoiler, 20" ID x 64" face Drum, 50" separator Shaft, 11" shaft, R-L, 125 HP
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Yoder
40,000 Lbs. Capacity, 20" ID x 64" face Drum, Manual grip and expansion, Hydraulic push-off, 50" Separator shaft, 125 HP ABB AC motor, 1783 RPM with ABB Drive, H&S reducer, size 150-D210, 17.42:1, 100 HP rating, 530RPM input, 1.0 service factor, 11" shaft, Mode of operation Right to Left.
Get email updates for newly added Recoilers
Recoilers (also known as coil rewinders) are specialized machines used to rewind processed metal strips or sheets into coils after operations like cutting or slitting. By automating the recoiling process, these systems ensure tight and uniform coils, making the material easier to handle, transport, and store.
40000 lb. Yoder, recoiler, 72" OD, 64" face drum, 20" diameter drum, manual grip & expansion, hydraulic pushoff
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Yoder
Yoder Recoiler, -40,000# x 60" Capacity, -64" Face Drum, -20" Dia. Drum, -Manual Grip and Expansion, -Hydraulic Pushoff, -Floor to Center Line of Drum: 41.5", -O.D. Capacity: 72" (44" Radius from CL of Drum to Overarm Shaft), -50" Long Separator Shaft, -125 HP ABB AC Motor, 1783 RPM with ABB Drive ASC800, -H & S ...more
40000 lb. Comeq Stamco Recoiler, 70" drum face, 67" Gripper Slot, 49" to Top of Mandrel, Hydraulic
National Machinery Exchange | Newark, NJ
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
50000 lb. Herr Voss, Recoiler, w/ Attached Separator & Push-off, 200 HP
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
-60" x 50,000 Lbs, -200 HP GE DC Motor, -Two-Speed Gearbox.
50000 lb. Loopco, Recoiler w/Coil Car, 58" coil width, 20" diameter Hydraulic Drum, 24" pads, 100 HP
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Loopco
Width: 58" Mandrel Face, Weight Capacity: 50,000 Lbs., ID Range: 20" Diameter Hydraulic w/ Pads for 24", Motor: 100 HP DC, Line Direction: Right to Left.
50000 lb. Paxson, Recoiler, 72" width, manual expansion & gripper
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Paxson
Manufacturer: Paxson, Width Capacity: 72", Weight Capacity: 50,000 Lbs., Manual expansion, Manual gripper, Includes:, Drive cabinet with drives, Isolation transformer, outboard bearing support, and overarm separator tooling..
50000 lb. Paxson, recoiler, 60" capacity, 20" diameter drum w/ pads, 84" OD, powered clamp & expansion, 48" passline
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
50,000# x 60" Paxson Recoiler, -20" Dia. Drum with 24" Pads, -66" Face Hard Chromed Drum, -84" Max. Coil O.D., -Powered Clamp and Expansion, -Overarm Separator, -Hydraulic Pushoff, -Air powered Holding Brake, -150 HP Main DC Motor, 850/2000 RPM, 500 V (Less SCR Drive), -Main Gear Box w/3.5:1 Ratio (approx.), -D.O. ...more
60000 lb. Kawasaki Mitsubishi, double mandrel carousel recoiling, 54", R to L
National Machinery Exchange | Newark, NJ
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kawasaki
THIS DOUBLE MANDREL CAROUSEL RECOILING SYSTEM ENABLES A PROCESS LINE TO RUN, CONTINUOUSLY AND EFFICIENTLY ALLOWING FOR A FINISHED COIL TO BE WOUND ON THE, FIRST RECOIL MANDREL AND COIL REMOVED AS THE SECOND MANDREL IS POSTIONED TO, RECEIVE THE INCOMING COIL. DOUBLE MANDREL CAROUSEL SYSTEM IS CURRENTLY, INSTALLED ON ...more
60000lb. Paxson, Recoiler, 72" outside dimension, 20-24" ID, LR, 20" diameter drum, 1960
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Year: 1960
-Year: 1960 - (1970's Updated Controls), -Coil Weight: 60,000 lbs., -Coil Size: 20" to 24" ID x 72" OD, -Line Direction: Left to Right, -20" Diameter Drum, -Hydraulic Clamp and Expansion, -Hydraulic Pushoff, -Overarm Separator, -100 HP DC Motor, 650/1950 RPM, 500 V, with Blower, -In Storage.
60000 lb. Pro-Eco, recoiler, 83" drum face, hydraulic clamp & expansion, 24" dia. drum, 1994
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
Year: 1994
Pro Eco Recoiler, -Capacity: 60,000# x 72", -24" Dia. x 83" Face Drum, -Hydraulic Clamp and Expansion, -Hydraulic Pushoff, -Holddown Roll, -Sliding Base, -300 HP DC Drive Motor w/Holding Brake, 650/1950 RPM, -Horsburgh & Scott Gearbox w/12.48:1 Ratio, Rated at 300 HP @ 650/2000 RPM, -Built-In Belt Wrapper, -Line ...more
60000 lb. Red Bud Industries, recoiler, 72" width, 150 HP, 2012
Met-Pro Machinery Inc | Detroit, MI
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Year: 2012
MFG: Red Bud Industries, Model: RC30-80, S/N: RCK11-M0841, Year: 2012, 60,000Lbs Capacity, 72" nominal material width, 150HP Drive Motor, Brad Foote Reducer: 190.1:1, 650/2600RPM, Right to Left mode of operation, The RBI Recoiler's reducer can be altered to speed up the RPM/ FPM. The Bottom Shaft can be removed(1st ...more
60000 lb. Wean, 82" recoiler, 23" dia drum, 80" coil outside dimension
Galaxie Corporation | Wayne, MI
Category: Recoilers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Wean
Wean Order No. 34570, 83"Drum Face, 23" Dia Drum, 80" Coil OD, Hydraulic Expansion & Collapse, Hydraulic Gripper, 3 Segment Drum, Gear Box Ratio: 26.61 : 1, Sliding Base, Hydraulic Push-Off, 250 HP DC Motor, 400 / 1300 RPM, 500 Volt.
70000 lb. Red Bud, recoiler & coil car, 20" diameter x 79.5" face drum, hydraulic grip & expansion, power holddown roll, 2007
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Red Bud
Year: 2007
70,000# x 72" Red Bud Recoiler and Coil Car, Model: RC 39-80, 20" Dia. x 79.5" Face Drum, Pads For 24" I.D., Hydraulic Grip & Expand, 250 Hp DC Motor (Less Controls), With Parker 400 HP Rated Solid State Drive, Brad Foote Reducer Rated At 300 Hp, 91.19:1 Ratio, Powered Holddown Roll, Sliding Base, Outboard Support ...more
80000 lb. Pro-Eco, Recoiler, 78" width, 24" - 30" ID, 150/500 FPM, 300 HP
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Pro-Eco
Max Width: 78", Weight Capacity: 80,000 Lbs., Line Direction: Right to Left, ID Range: 24" - 30" 300 H.P. DC Motor, 2 Speed Gearbox -150 FPM Maximum Speed Low Gear -500 FPM Maximum Speed High Gear, *gears are in excellent condition.
80000 lb. Pro-Eco recoiler, 78" width, 24"-30" ID, 300 HP 2 speed gearbox
National Machinery Exchange | Newark, NJ
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pro-Eco
WEIGHT CAPACITY: 80,000 LBS, WIDTH: 78", ID RANGE: 24" - 30", 300 H.P. DC Motor, 2 SPEED GEARBOX, 150 FPM MAXIMUM SPEED LOW GEAR, 500 FPM MAXIMUM SPEED HIGH GEAR.
80000 lb. Production Machinery #8480, Recoiler, 84" width, 20" - 24" ID, L-R
VX Machinery | Sylvania, OH
Category: Recoilers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Production Machinery
, Manufacturer: Yoder, Coil Capacity: 80,000 Lbs, Coil Width: 84” (2133 mm), Coil O.D.: 80” (2032 mm), Diameter Of Mandrel: 23” (584 mm), Coil I.D.: 24” (610 mm), Hydraulic Expansion And Collapse: Yes, Hydraulic Gripper: Yes, Over Arm Separator: Yes, 3 Segment Drum: Yes, Gearbox Information: ...more
80000 lb. Voest Alpine, recoiler, 76" W, 24" diameter drum, hydraulic gripper & expansion, 1998
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Voest
Year: 1998
-Coil Weight: 80,000 Lbs., -Drum Face Width: 76", -Drum Dia.: 24", -Dual Direction Gripper for Over and Under Winding, -Hydraulic Gripper and Expansion, -Hydraulic Sliding Base, -Hydraulic Pushoff, -Nuttall Reducer W/28.607:1 Ratio, -500 HP DC Motor, 650/1950 RPM, 500 V, -Less Solid State Drive, -Top Hanging Outboard ...more
80000 lb. Yoder, recoiler, 84" width, 80" OD, 24" ID, hydraulic expansion & collapse, hydraulic gripper
G-2000 | Toledo, OH
Category: Recoilers
Seller: G-2000
Location: Toledo, OH
Mfr: Yoder
SERIAL.:, COIL CAPACITY.: 80,000 LBS, COIL WIDTH.: 84", COIL O.D.: 80", DIAMETER OF MANDREL.: 23", COIL I.D.: 24", HYDRAULIC EXPANSION AND COLLAPSE.: YES, HYDRAULIC GRIPPER.: YES, OVER ARM SEPERATOR.: YES, 3 SEGMENT DRUM.: YES, GEARBOX INFORMATION:, HORSBURGH & SCOTT, SIZE.: 175-D&6.5, RATIO.: 60.78, RATIO.: ...more
ADS, Motorized Recoiler, 15" diameter x 16" wide drum, 5 HP DC motor, 108.81:1 gearbox ratio, 180 Volt
International Rolling Mills | Pawtucket, RI
Category: Recoilers
Seller: International Rolling Mills
Location: Pawtucket, RI
Mfr: Ads
This ADS heavy-duty motorized recoiler (coiler) is designed for efficient strip coiling and take-up in a wide range of metal processing applications. Commonly used in rolling mills, slitters, and coil processing systems, this unit functions as a take-up reel for rewinding processed strip into tight, uniform coils ...more
Motorized Recoiler, 2.18" diameter x 15" wide shaft, 5 HP DC motor, 35:1 gearbox ratio, 180 Volt
International Rolling Mills | Pawtucket, RI
Category: Recoilers
Seller: International Rolling Mills
Location: Pawtucket, RI
Mfr: Custom
This heavy-duty motorized recoiler (coiler) is designed for efficient strip coiling and take-up in a wide range of metal processing applications. Commonly used with rolling mills, slitters, and coil processing lines, this unit functions as a take-up reel for rewinding metal strip into tight, uniform coils while ...more
Fata Hunter Machine Concepts, hydraulic recoiler, 20-1/2" mandrel width, 7.5 HP, #55211
Yoder Machinery Sales | Holland, OH
Category: Recoilers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Fata Hunter
# 20214 045 601, RECOILER DRUM(MANDREL). 20" X 17" DIAMETER, FLOOR TO CENTERLINE. 36", ALUMINUM CLEANING RECOILER, HYDRAULIC PUSH OFF, HYDRAULIC OVERARM, OVERALL DIMENSION. 112" LONG X 80" WIDE X 90" HIGH, HYDRAULIC UNIT. 15 HP 230/460/3/60, OVERALL DIMENSIONS. 60"WIDE X 68" LONG X 96" HIGH, REETZ SERIAL. 2003079 ...more
Littell #424-7PD, 24" width, .078" thickness
S & G Press & Machinery Sales | Shelby Township, MI
Category: Recoilers
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Littell
Coil Width 24 Coil Thickness.078, Preliminary, Littell Powered Straightener, Model# 424-7PD, Serial #: 870832-82, 24" Max Coil Width,.078" Capacity at Full Width, 7 Roll Powered Straightener, Entry Pinch Rolls, Edge Guides, Jog / Forward / Reverse, Loop Control.
JUST ADDED!
Pro-Eco, 84" x 24" outside dimension, 150 HP DC, 400 FPM, Hydraulic Exp., Sliding Base, Overarm Sep, Spare 300 HP DC Motor
American Steel Products Co | Toledo, OH
Category: Recoilers
Seller: American Steel Products Co
Location: Toledo, OH
Mfr: Pro-Eco
Ruesch Recoiler, left to right, 30" face, 16" ID, 72" OD, 7.59:1, manual expansion, 40 HP, 500V.
Met-Pro Machinery Inc | Detroit, MI
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
Ruesch, recoiler drums, 6" & 8" diameters (3 available)
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Recoiler Drums, (3) Drums available, Were previously used on a Ruesch Slitting Line, -Drum #1: 6" Dia. x 22.5" Face, Solid Drum, 2.5" Dia. Spindle Hole w/0.750" x 0.250" keyway, -Drum #2: 6" Dia. x 20" Face, Solid Drum, 3" Dia. Spindle Hole w/0.750" x 0.250" keyway, -Drum #3: 8" Dia. x 15" Face, Manual Expansion, 2.5" ...more
Stamco Recoiler Drum, 72" Wide x 16" diameter, 1980' s
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
Stamco Recoiler Drum, -72" Face Width x 16" Dia., -Designed for Powered Clamp and Expansion, -Dual Direction Gripper, for over and under wind, -Designed for use with Outboard Support Arm, -Complete Drum and Shaft Assembly, -In Storage: Toledo, OH., Note: 2 Drums available., Price Listed below is for "Each" Drum.
Ruesch, 16" diameter x 30" face width, recoiler drum, manual expansion, manual gripper
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Ruesch Recoiler Drum, -16" Dia. x 30" Face Width, -Manual Expansion, -Manual Gripper (Gripper Bar Missing), -Designed for use with approx. 6" Dia. Shaft, -In storage: Toledo, OH.
Ruesch, 16" diameter x 40" face width, recoiler drum, manual expansion, manual gripper
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Ruesch Recoiler Drum, -16" Dia. x 40" Face Width, -Bolt on Pads for 20" Dia. (with Halo Fixture), -Manual Expansion, -Manual Gripper, -Designed for use with approx. 7" Dia. Shaft, -Line Direction: Left to Right, -In storage: Toledo, OH.
Ruesch, 16" diameter x 28" face width, recoiler drum, manual expansion
D & H Machinery Inc | Toledo, OH
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Ruesch Recoiler Drum, -16" Dia. x 28" Face Width, -Manual Expansion, -Material Slot, No Gripper, -Designed for use with approx. 4" Dia. Shaft, -In storage: Toledo, OH.
