29 Results
Cam-Wood #RS-612X, Radial Arm Saw, 2 HP, 3-1/8" cut depth, 10-12" diameter blade, 27" trimming width x 16-1/2" crosscut, 1" diameter spindle, 25-1/2" x 31-1/2" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-612X
Year: 2026
CAM-WOOD RS-612X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 2 HP Single-phase motor; 3-1/8" cutting depth with 10-12" dia. blade; 27" max. trimming width x 16-1/2" max. crosscut; 1" dia. spindle. : -- Magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head ...more
Cam-Wood #RS-640X, radial arm saw, sturdy cast iron frame, 4 HP, 4-1/8" cutting depth, 14" diameter blade; 43" max trimming width x 24" max crosscut, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-640X
Year: 2026
CAM-WOOD RS-640X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 4 HP motor; 4-1/8" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. : -- Laser Light, magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ...more
Cam-Wood #RS-660X, radial arm saw, 4 HP Motor; 4-1/8" cutting depth, 16" diameter blade, 45" max trimming width x 35" max crosscu, 0-180 degree saw head rotation, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-660X
Year: 2026
CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.: -- 4.5 HP Motor; 5-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0 - 180 Saw head rotation with positive locks on rotating ...more
18" Delta Rockwell #18-AS, Radial Arm Saw, 7.5 HP, 3ph, 230/460 V.
RT Machine | Hughesville, PA
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Delta Rockwell
Model: 18-AS
Delta Rockwell Model 18-AS Radial Arm Saw Maximum Blade Diameter 18" Motor 7.5HP; 3PH; 230/460 Volt Turret Arm Design Allows the Saw Blade to Pivot from the Middle of the Arm Serial No. FK-4606 This Machine is part of a total plant liquidation, Please call for.
Dewalt #35-Series, Radial Arm Saw, 7.5 HP, 22" diameter Blade, 52" L arm, 1" x 3-1/8" saw arbor, 7" thick capacity @ 90 deg, 26" crosscut, 40" rip capacity
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: 35 SERIES
DEWALT - 35 Series Super Duty,.22" Radial Arm Saw: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: -- VFD brake ($ 1,500).
Get email updates for newly added Radial Arm Saws
Radial Arm Saws (also known as overhead saws) are versatile cutting tools with a circular blade mounted on a horizontal arm, allowing for adjustable, precise cuts in wood, metal, or plastic. Commonly used in woodworking, construction, and fabrication, they are ideal for tasks such as crosscuts, rip cuts, and bevels. Radial arm saws are essential for achieving accurate, repeatable cuts in a variety of applications.
Dewalt #GA, Heavy Duty Radial Arm Saw, 5 HP, 16" diameter Blade, 1" x 3-1/8" saw arbor, 4" thickness capacity, 21" crosscut capacity
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: GA
DEWALT - GA: 16" Radial Arm Saw -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90; 12" crosscut cap.; cutting 1" board with standard length arm. -- Complete with: -- Blade guard; magnetic starter; stand; carriage return mechanism. -- Optional: -- VFD Brake (.$ 1,500). -- Photo not ...more
Dewalt #GE, 20" heavy duty radial arm saw, 7.5 HP TEFC motor, 1" x 3-1/8" arbor
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: GE
DEWALT - GE: 20" Radial Arm Saw -- 7-1/2 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor. -- 6" Thickness cap. @ 90; 21" max. crosscut cap. cutting: 2" Board; 42" rip cap. with: standard length arm; 2" dado capacity. Complete with: -- Blade guard; magnetic starter; stand; carriage return mechanism. Includes ...more
Dewalt #GE, radial arm saw with stand
G-2000 | Toledo, OH
Category: Radial Arm Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Dewalt
Model: GE
Machine Type.Brakes, Box & Pan (incld Finger) Manufacturer.DEWALT Model.GE Year.N/A Condition.Used.
Dewalt #Model-G1, Radial Arm Saw
Carolina Machinery Sales | Monroe, NC
Category: Radial Arm Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dewalt
Model: MODEL-G1
Dewalt Radial Arm Saw.
Dewalt, radial arm saw
Carolina Machinery Sales | Monroe, NC
Category: Radial Arm Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dewalt
Dewalt Radial Arm Saw.
Dewalt radial arm saw
G-2000 | Toledo, OH
Category: Radial Arm Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Dewalt
Machine Type.Woodworking Sanders Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
King Canada #KC-12RAS, 12' ' Radial Arm Saw, 12" blade diameter, 5/8" blade arbor, 2 HP, new
Lenmark Industries | Langley, BC
Category: Radial Arm Saws
Seller: Lenmark Industries
Location: Langley, BC
Mfr: King Canada
Model: KC-12RAS
SKU: 60531, Model: KC-12RAS, Condition: New, Horsepower: 2 hp, Blade Diameter: 12, Saw Type: Radial Arm Saws, Made In: TAIWAN, Dimensions: 39.00 (H) x 40.00 (W) x 48.00 (L) inches, Additional :, Blade Arbor (w/ 1" Bushing): 5/8", Maximum Depth of Cut (10"/12"): 2" / 3", Maximum Depth of ...more
Maggi #Big-800CE, Radial Arm Saw, 4 Hp, 2800 RPM, 230 V., 3ph, 16" blade, 1" arbor, 73.23" x 45.08" table, New
RT Machine | Hughesville, PA
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Maggi
Model: BIG-800CE
4 HP, 2800 RPM motor 230 volt 3 phase 16 Blade diameter capacity (Not included) 1 Arbor diameter 73.23 x 45.08 Table size 27.75 Max crosscut length on 3/4 thick material (90 deg) 0 to 40.5 Rip capacity 4.9 Max depth of cut 19.68 Max cut length at 45 deg on right side 12.20 Max cut length at 45 deg on left side Dust ...more
Maggi #JUNIOR-640-CE, Radial Arm Saw, 4 HP, 2800 RPM, 15.75" blade, New
RT Machine | Hughesville, PA
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Maggi
Model: JUNIOR-640-CE
Maggi Model Junior 640 Radial Arm Saw Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage ...more
Omga #Radial-900-7, Radial Arm Saw, 7 HP, 35-1/2" crosscut capacity, 5-7/8 max thickness, 43-5/16 rip, 18" diameter blade w/ 1" bore, 2" max dado, 3400 RPM arbor speed, 1998
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL 900-7
Year: 1998
OMGA 900/7 FM RADIAL ARM SAW : -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90; 24-15/16" @ 45; 5-7/8" max. thickness cap. at 90, 4-3/16" at 45; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed.s: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages ...more
Omga #RADIAL-1250-7, radial arm saw, 7 HP, 43.897" crosscut, 6-7/8" thickness, 20" diameter blade with 1" bore, 1-3/4" max dado, 3400 RPM arbor speed, 180 degree swivel, 45 degree saw head tilt, 202**
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-1250-7
Year: 2026
OMGA Radial 1250-7 Radial Arm Saw -- : 7 HP Saw motor, 43.897" crosscut cap. at 90; 6-7/8" thickness cap. at 90, 4-7/8" at 45; 59" rip cap.; 20" dia. blade with 1" bore; 1-3/4" max. dado cap.; 3,400 RPM Arbor Speed. -- s: Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) ...more
Omga #RADIAL-600-P3S, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-600-P3S
Year: 2026
OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180 Swivel of entire saw carriage for mitered crosscuts. -- 45 Saw head tilt for compound miter ...more
Omga #RADIAL-900-7, radial arm saw, 7 HP, 35-1/2" crosscut, 24-15/16" max thickness, 4-3/16" rip, 18" diameter blade with 1" bore, 3400 RPM arbor speed, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-900-7
Year: 2026
OMGA RADIAL ARM SAW 900-7 -- : -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90; 24-15/16" @ 45; 5-7/8" max. thickness cap. at 90, 4-3/16" at 45; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- s: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages ...more
Omga #RN-450, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, electro-magnetic brake, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-450
Year: 2026
OMGA RN 450 Radial Arm Saw: -- 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90 thickness cap., 2-1/2" at 45; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. : -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & ...more
JUST ADDED!
Omga #RN-600-CND, Radial Arm Saw, 14" blade diameter, 35" x 31" table, 23-5/8" to 24" crosscut, 4-1/2" max. depth of cut @ 90°, 4 HP, 3200 RPM, 575 Volt, 3PH, 1998
Brighton Woodworking Machinery | Uxbridge, ON
Category: Radial Arm Saws
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Omga
Model: RN-600-CND
Year: 1998
The Omga RN 600 CND (14-inch) radial arm saw is a heavy-duty, industrial-grade machine known for its precision and reliability in professional woodworking environments.Why This Machine?- Precision Engineering: s a saw carriage sliding on 8 bearings with integrated dust scrapers, ensuring the steel tracks remain clean ...more
Omga #RN-700, radial arm saw, 5 HP, 27-1/2" crosscut capacity, 8 bearings with dust scrapers, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-700
Year: 2026
OMGA RN-700 RADIAL ARM SAW & s: -- 5 HP, 27-1/2" Crosscut cap. @ 90; 19-7/16" @ 45. -- Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the positions of the main angles ...more
Omga #RN-900, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-900
Year: 2026
OMGA RADIAL ARM SAW MODEL 900 Series RN Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180 Swivel of entire saw carriage for making mitered crosscuts. -- 45 Saw head tilt for compound miter cuts. ...more
The Original Saw Co. #3531-03, Radial Arm Saw, 5 HP, 14" blade size, standard arm, 1" x 2-3/16" arbor
SOMINN Machinery Sales | Dodge Center, MN
Category: Radial Arm Saws
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: The Original Saw
Model: 3531-03
ORIGINAL (USED) MODEL 3531 03 RADIAL ARM SAW, - 5 HP, - 3 PHASE, - 50/60 HZ, - 208 / 230 / 460 VOLTS, - 14" BLADE SIZE, - STANDARD ARM, - 1" x 2 3/16" ARBOR, - 758 MM MAX. OUT RIP, - 406 MM MAX. CROSS CUT 1" STOCK, - 276 MM MAX. MITER 45 DEG. 1" STOCK, - 104 MM MAX. DEPTH OF CUT, - 44MM MAX. ...more
Original #3512-03, radial arm saw, 3 HP, 12" diameter blade, 1" x 2-3/16" saw arbor, 3-1/16" thickness, 24-1/4" crosscut with 1" stock, 21-1/4" with 3" stock, 16" max miter cut, 34-15/16" rip, 2026, **
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3512-03
Year: 2026
ORIGINAL 3512-03 RADIAL ARM SAW (Contractor Series)The Contractor Duty Series is an industrial rated machine that has the versatility to crosscut, bevel cut, miter cut, and swivel to a rip position to cut down panels precisely and accurately. These machines are well suited for cutting off up to 3"; material, as well ...more
Original #3546, radial arm saw, 5 HP, 16" diameter blade, 1" x 2-3/16" saw arbor, 4-15/16" thickness, 24" crosscut, 5-1/2" max miter cut, 42-1/2" x 31-1/4" MDF table, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3546
Year: 2026
ORIGINAL 3546 RADIAL ARM SAW (Heavy Duty Series)The Heavy Duty Series is a very precise machine made for the rigors of every day industrial use. Straight, miter, bevel and compound bevel cutting in a heavy gauge steel powder coated frame & legs. : 5 HP TEFC Saw motor; 16" dia. blade; 1" x 2-3/16" saw arbor; ...more
Original #3558, radial arm saw, 7.5 HP, 20" diameter blade, 1" x 3-1/8" saw arbor, 6-1/4" thickness, 32" crosscut, 21-5/8" max miter cut, 48-3/4" rip, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3558
Year: 2026
ORIGINAL 3558 RADIAL ARM SAW (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy-duty cast and ductile iron for vibration-free operation. : -- 7.5 HP TEFC Saw ...more
Original Saw #3559, Radial Arm Saw, 22.5" Super Duty, 7.5 HP, 3ph, TEFC, new
RT Machine | Hughesville, PA
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Model: 3559
7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 50/60 HZ 8" depth of cut Automatic blade braking system through Variable Frequency Drive (VFD) Manual chain cross feed Manual hand crank for refined carriage control Adjustable crosscut stop Base column lock E-Stop Standard lower elevation on front of frame ...more
Original #3579-20L, Radial Arm Saw, 20" blade, 1" x 3-1/8" saw arbor, 7" thickness @ 90°, 32" crosscut, 21-5/8" miter cut @ 45°, 208/230/460 V., 2026
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3579-20L
Year: 2026
ORIGINAL 3579-20L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. ...more
Original #3579-22L, Radial Arm Saw, 7.5 HP, 22.5" diameter Blade, 8" Thickness Capacity, 460 V., 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3579-22L
Year: 2026
ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass ...more
