18 Results
Featured
12" width x 12" H x 40" L Linn #HT-1600-GS, gas tight chamber, 1600°C 2880 °F)
Nahuto Technologies | Lyndhurst, OH
Category: Heat Treating Furnaces
Seller: Nahuto Technologies
Location: Lyndhurst, OH
Mfr: Linn
This is an industrial high temperature furnace. It was used to sinter copper powder parts in Nitrogen protective atmosphere at 960 deg C. Insulation is in very good condition suitable for 1600 deg C operation. The heating elements are Molybdenum Disilicide type MD-31. The Temperature Control System has been adapted to ...more
7.8" width x 9.8" D x 5.9" H Yamato #FP303-FP313, high performance furnace, 2102°F, 115/220 V.
LR Environmental Equip Co | Los Angeles, CA
Category: Heat Treating Furnaces
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Yamato
Yamato High Temperature Furnace Model #FP303 & FP313, MUFFLE FURNACE :, I.D. 7.8" X 9.8" X 5.9", Maximum Temperature: 1150 Deg. C (2102 F), Power: Model FP303 - 115V, 21.5 Amps, Model FP313 - 220V, 13.5 Amps, Stock #FP80, High performance muffle furnace with a microprocessor-controlled thermo-regulator ...more
9" x 7" x 26" Johnson #175SLL, oven, 45000 BTU, Partlow analog control, #64249
Yoder Machinery Sales | Holland, OH
Category: Heat Treating Furnaces
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Johnson
SERIAL. 149KA, MODEL. 175SLL, INPUT HEAT CAPACITY. 45,000 BTU/HR, SIZE OF CHAMBER. 9" X 7" X 26", PARTLOW ANANLOG CONTROL. YES.
JUST ADDED!
12" x 8" x 17.5" Sentry #AY, Heat Treat Furnace, Size 5, 2500 Deg., 220V, 3 Ph., 33 KW, 87A
Aucto | San Francisco, CA
Category: Heat Treating Furnaces
Seller: Aucto
Location: Louisville, KY
Mfr: Sentry
THE SENTRY SIZE 5, MODEL AY HEAT TREAT FURNACE IS DESIGNED FOR THERMAL PROCESSING WITH A MAXIMUM OPERATING TEMPERATURE OF 2500 DEGREES. THIS UNIT S HONEYWELL CONTROLS AND HAS AN INTERNAL CHAMBER SIZE OF 12 INCHES WIDE BY 8 INCHES HIGH BY 17.5 INCHES DEEP. ELECTRICAL INCLUDE A REQUIREMENT FOR 220V 3 PHASE POWER, WITH ...more
12" width x 8" H x 17.5" D Sentry Size 5 #AY, heat treat furnace, 2500°F, 220 V., 3-phase, 87 amps.
Machinery Central | Louisville, KY
Category: Heat Treating Furnaces
Seller: Machinery Central
Location: Louisville, KY
, Sentry Size 5, Model AY Heat Treat Furnace. Max temp 2500F, 220V 3 Phase, 33Kw, 87 Amp. Chamber: 12"W x 8"H x 17.5"D with Honeywell controls. Used condition, s/n CB16372. Ideal for precise heating applications., Spec Sheet:, Sentry Size 5, Model AY Heat Treat Furnace, Max temp 2500 degrees, 220v 3 Phase, 33 Kw, 87 ...more
12" width x 9" H x 18" D Lucifer #42-H18, furnace, 1200°F, Honeywell temperature controls, 2006
Hildebrand Machinery Co Inc | York, PA
Category: Heat Treating Furnaces
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Lucifer
Year: 2006
LUCIFER FURNACEPRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,500.00, HMC Stock # 25019, Machine Serial No.: 7394, Machine Model No.: 42-H18, Year: 2006, Maximum Operating Temperature: 1200 Degrees F, Chamber Size: 12" Wide x 9" High x 18" Deep, Power: 5 KW, AMPS: 7, Honeywell Temperature Control ...more
Get email updates for newly added Heat Treating Furnaces
Heat Treating Furnaces (also known as thermal treatment furnaces) are systems designed to heat materials to specific temperatures for processes like annealing, hardening, tempering, and normalizing. Commonly used in industries such as aerospace, automotive, and metalworking, these furnaces enhance material properties like strength, hardness, and ductility. Heat treating furnaces ensure precise temperature control, uniform heating, and consistent results for improved component performance and durability.
12" width x 12" H x 24" D Lucifer, dual chamber heat treat / draw furance, 2300°F/1200F
Machinery Central | Louisville, KY
Category: Heat Treating Furnaces
Seller: Machinery Central
Location: Louisville, KY
Mfr: Lucifer
, The Lucifer Furnaces HL82-N24 Industrial Furnace is a dual-chamber unit featuring 2300F (hardening) and 1200F (tempering) maximum temperatures, with chamber dimensions of 12" H x 12" W x 24" D for both sections., Spec Sheet:, 12 x 12 x 24 Lucifer Duel Chamber Heat Treat/Draw Furnace 2300F/1200F, Model Type Dual ...more
12" width x 12" H x 24" D Lucifer #HL82-K24, dual chamber heat treat/draw furnace, 2300°F, Honeywell Control
Machinery Central | Louisville, KY
Category: Heat Treating Furnaces
Seller: Machinery Central
Location: Louisville, KY
Mfr: Lucifer
, Lucifer HL82-K24 dual chamber furnace, 12"x12"x24" chambers, reaching up to 2300F for heat treatment and 1250F for drawing. Honeywell controls, it operates at 480V, 29 Amps, 21.5 KW. Ideal for industrial applications. Used., Spec Sheet:, 12" x 12" x 24" Lucifer HL82-K24 Over/Under Duel Chamber Heat Treat/Draw ...more
JUST ADDED!
12" width x 12" H x 40" L Linn #HT-1600-GS, gas tight chamber, 1600°C 2880 °F)
Nahuto Technologies | Lyndhurst, OH
Category: Heat Treating Furnaces
Seller: Nahuto Technologies
Location: Lyndhurst, OH
Mfr: Linn
This is an industrial high temperature furnace. It was used to sinter copper powder parts in Nitrogen protective atmosphere at 960 deg C. Insulation is in very good condition suitable for 1600 deg C operation. The heating elements are Molybdenum Disilicide type MD-31. The Temperature Control System has been adapted to ...more
91" x 360" 15-Zone High Heat Treat Industrial oven, up to 1800°F, Completely Rebuilt
American Industrial Sales LLC | Berlin, WI
Category: Heat Treating Furnaces
Seller: American Industrial Sales LLC
Location: Berlin, WI
15-ZONED HIGH HEAT TREAT OVEN, COMPLETELY REBUILT IN 2015 AT $250,000 +, - Oven can heat up to 1,800 degrees F, - Dimensions are 7’ 7” (ID) x 30’, - 6’ high door with attached cart on tracks, - All new brick and insulation, - All new ICS controls, - All new control panel with flame relays, - ...more
120" width x 84" H x 68" D CEC drop bottom heat treat furnaces w/common traveling quench tank, 1997 (2 available)
FL Sales Inc | Solon, OH
Category: Heat Treating Furnaces
Seller: FL Sales Inc
Location: Sidney, OH
Mfr: Cec
Year: 1997
2- 1997 CEC drop bottom heat treat furnaces s/n 2636 and 2650 with common traveling quench tank, 2- drop bottom furnaces, controls, work area is 68" x 120" x 84" high, 100" quench tank, 5,000# capacity, 10 second quench, gas fired.
Can-Eng, heat treat 2 furnace utilities, Natural gas, 24 ft3/hr @ 80 psi compressed air
Machinery Network Inc | Encino, CA
Category: Heat Treating Furnaces
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Can-Eng
Solution Furnace Utilities, Max Operating Temperature = 565C, Heat Input = 5,500,000 BTU/h, Natural Gas = 5500 SCFH @ 3-5 PSIG, Power = 460V, 3PH, 60HZ, FLA 625A, Compressed Air = 24 ft3/hr @ 80psi, Dimensions- 43X24X25, Air Quench Utilities, Quench Rate = From 500C to 100C in 4 minutes or less (Tempered Air medium) ...more
Cheston #FR100, induction hardener, parts only, #68791
Yoder Machinery Sales | Holland, OH
Category: Heat Treating Furnaces
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cheston
SELL AS IS FOR COMPONENTS AS PARTS ONLY NO WARRANTY.
Hedinair, 4-zone non-ferrous heat treating annealing oven & small batch oven, 600°C, 2013
National Machinery Exchange | Newark, NJ
Category: Heat Treating Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hedinair
Year: 2013
4-ZONE HEDINAIR NON-FERROUS HEAT TREAT ANNEALING OVEN & SMALL BATCH OVEN, MANUFACTURER - HEDINAIR, YEAR - 2013, NUMBER OF ZONES - 4, TYPE - FORCED CIRCULATION, ELECTRICALLY HEATED OVEN, DELIVERY MECHANISM - BOGIE CART, TEMPERATURE RANGE - 50-600 DEGREES CELSIUS, RATING - 320KW HEATING, WORKING DIMENSIONS - 952MM H ...more
Hisen #TM001-M-AK0001, Induction Heat Treat Machine, 300 KW, 480 V., 2015
Revelation Machinery | Chicago, IL
Category: Heat Treating Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Hisen
Year: 2015
Make: Hisen, Model: TM001-M-AK0001, Year: 2015, Machine Location: Upon Request, Output Power: Max 300KW, Power Source: 480V 50Hz, Frequency: 300 khz +/-10%, Cooling: Forced air cooling, Rectifier: Full wave rectifier, Voltage adjustment: by S.C.R., HV Transformer: 10-15kV 25A, Stroke 400mm (Hydraulic)., CT Movable ...more
Infrared #ITIBO-26KVA-SF-02, Oven 26 KVA - Like New, 2008
Peterson Machinery Sales | Casa Grande, AZ
Category: Heat Treating Furnaces
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Infrared
Year: 2008
Max Temperature: 1200 deg F.
JUST ADDED!
Lucifer #HL82-K24, Dual Chamber Heat Treat/Draw Furnace, 2300/1250 Deg., 480V, 21.5 KW, 12x12x24"
Aucto | San Francisco, CA
Category: Heat Treating Furnaces
Seller: Aucto
Location: Louisville, KY
Mfr: Lucifer
THE LUCIFER HL82-K24 IS AN OVER/UNDER DUAL CHAMBER HEAT TREAT/DRAW FURNACE. THIS EQUIPMENT IS DESIGNED FOR HEAT TREAT PROCESSES UP TO 2300 DEGREES AND DRAW PROCESSES UP TO 1250 DEGREES. EACH CHAMBER S DIMENSIONS OF 12"H X 12"W X 24"D. OPERATIONAL CONTROL IS MANAGED BY HONEYWELL CONTROLS. THE UNIT IS ...more
Lucifer #HDL-8012-D, Dual-Chamber Electric Heat-Treating Oven Furnace, 2300°F
Norman Machine Tool Ltd | Baltimore, MD
Category: Heat Treating Furnaces
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Lucifier
Lucifer 2,300° F Dual-Chamber Electric Heat-Treating Oven Furnace, HDL-8012-D, Inventory # 9954-C, Model: HDL-8012-D, S/N: 4641, Max. Temperature:, Upper Chamber (Hardening): Max. 2,300° F, Lower Chamber (Tempering): Max. 1,200° F, Chamber Size:, Upper Chamber (Hardening): 13 1/2″ W x 12″ D x ...more
SAFED heat treat production line, treatments of quenching & tempering or Nitrurizing/Carbonitrursing/Carburizing + tempering, 1997
Hariton Machinery Co Inc | Bridgeport, CT
Category: Heat Treating Furnaces
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Safed
Year: 1997
Treatments of Quenching and Tempering and/or, Nitrurizing/Carbonitrursing/Carburizing + Tempering, for small carbon steel parts, composed by:, Loading system Skako, with tilter + vibrating chutes, High temerpature furnace SAFED TG80/36TiG, muffle type, gas heated, CE compliant, Atmosphere regulation by nitrogen + ...more
