10 Results
MEC 75 HP Hammermill
Carolina Machinery Sales | Monroe, NC
Category: Hammermills for Wood Processing
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mec
75 HP Hammermill.
Montgomery hammermill, 100 HP, includes: outfeed conveyor and infeed hopper
Carolina Machinery Sales | Monroe, NC
Category: Hammermills for Wood Processing
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Montgomery
Montgomery 100 HP Hammer Mill, Includes: Outfeed conveyor and Infeed Hopper.
Schutte #280.100, Hammermill, (2) 125 HP Motors - new 480v and used 575v
Carolina Machinery Sales | Monroe, NC
Category: Hammermills for Wood Processing
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Schutte
Model: 280.100
Schutte model 280.100 Hammer Mill, Includes: 125 HP Motor - 480v, Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed), Includes: Stand.
Schutte-Buffalo #WA16L, vertical hammermill
Ex-Factory | Charlotte, NC
Category: Hammermills for Wood Processing
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte-Buffalo
Model: WA16L
SCHUTTE BUFFALO - Model WA16L,. HammermillModel# WA16L, 3500 RPM, with filtration system and multiple grates for destruction sizes. -- It also includes Electrical panel. -- This system is apart and palletized. All you have to do is pick it up and transport it to you. -- System was in perfect working order when it was ...more
Schutte-Buffalo-Astec #AHM-20, Hammermill, Carbon Steel, (2) 48" diameter x 24" width Rotors, (14) 2.75" width x 4" x 0.31" thick Swinging Hammers, 600 HP, 460 V
Aaron Equipment Co | Schaumburg, IL
Category: Hammermills for Wood Processing
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Schutte-Buffalo-Astec
Model: AHM-20
used- schutte-buffalo-astec hammermill, model ahm-20, carbon steel. approximate (2) 48" diameter x 24" wide rotors. 2-3/4"w x 4"l x 5/16" thick swinging hammers, approximately 7 rows of (14 hammers) 2 sections, 3/16" screen. 15"w x 60" long top feed with hopper, 60-1/2"l x 11"t bottom discharge. driven by a 600 hp ...more
Get email updates for newly added Hammermills for Wood Processing
Hammermills are machines used to grind wood materials into smaller particles, such as chips, mulch, or sawdust, for further use. These machines crush and shred wood efficiently while preserving quality, making them ideal for recycling scrap wood or producing materials like pellets and animal bedding. Hammermills are essential for efficient, large-scale wood processing and waste management.
Schutte-Buffalo-Astec #AHM-20, Carbon Steel, (2) 48" diameter x 24" width Rotors, (14) 2.75" width x 4" x 0.31" thick Swinging Hammers, 600 HP, 460 V
Aaron Equipment Co | Schaumburg, IL
Category: Hammermills for Wood Processing
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Schutte-Buffalo-Astec
Model: AHM-20
used- schutte-buffalo-astec carbon steel hammermill, model ahm-20. approximate (2) 48" diameter x 24" wide rotors. 2-3/4" wide x 4" long x 5/16" thick swinging hammers, approximate 7 rows of (14 hammers) 2 sections, 3/16" screen. 15" wide x 60" long top feed with hopper, 60-1/2" long x 11" tall bottom discharge. ...more
Williams #220-HP, Wood Hammermill, 220 HP, 26" x 12" Input Opening, 4" Main Shaft, 3/8" thick swing hammer, 1991
Ex-Factory | Charlotte, NC
Category: Hammermills for Wood Processing
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Williams
Model: 220 HP
Year: 1991
WILLIAMS - Hammer Mill: Half-round Type Configurations: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26"; x 12"; Input Opening. -- Powered Input Pull Rolls -- 4"; Main Shaft with Swing Hammers, approx. 3/8"; thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access ...more
Williams #Hammer-Hog, 24" x36" inlet, 8" x36" outlet, 150 HP, fan on outlet
Carolina Machinery Sales | Monroe, NC
Category: Hammermills for Wood Processing
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Williams
Model: HAMMER-HOG
24” x 36” inlet, 8” x 36” outlet, 150 HP motor, fan on outlet.
Williams, Hammermill, 18" x 30" Capacity
Alan Ross Machinery Corp | Zion, IL
Category: Hammermills for Wood Processing
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Williams
18" x 30" Feed Opening, Frame, 18" x 32" Rotor.
West Salem Machinery #500HP, hammermill / shredder
Ex-Factory | Charlotte, NC
Category: Hammermills for Wood Processing
Seller: Ex-Factory
Location: Charlotte, NC
Model: 500HP
WSM - Power Hog Industrial Hammermill: 500 HP NO MOTORSelling a Heavy-Duty WEST SALEM MACHINERY (WSM) Power Hog Hammermill designed for: Industrial wood grinding; recycling; construction debris processing. This unit s: Massive 4-foot feed opening; can be powered a 300 - 500 HP electric motor; capable of shredding: ...more
