151 - 200 of 341 listings
16" x 16" LR Systems #SG400, Granulator, 48" O.D. x 76" straight side Hopper, 25 HP, On Portable Base, 1996
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lr Systems
Model: SG400
Year: 1996
Used LR Systems Granulator. Model SG400, Serial #6557, new 1996. Has 16" X 16" throat opening. Driven by an approximately 25 HP motor. Includes motor starter and 5 HP blower for discharge. Also includes oversized hopper for accepting air conveyed scrap bottles, 48" O.D. X 76" straight side. Grinder and oversized ...more
16" x 20" AEC, Nelmor #G1620, granulator, 30 HP, 1755 RPM, 3 rotating & 2 bed knives, refurbished
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Aec
Model: G1620
Model: G1620, Hp: 30, Rpm: 1,755, Voltage: 480/3/60, Amps: 37 FLA, Screen Hole Size: 5/16", Cutting Chamber Width In: 27", Cutting Chamber Height In: 20", Feed Throat Width: 20", Feed Throat Height: 16", Blade Configuration: 3 Rotating Knives - 2 Bed Knives.
JUST ADDED!
16" x 20" Cumberland #1620X, granulator, 20 HP, 3 knife scooped rotor, 2 bed knives, 16.5" cut circle, 3/8" screen, 54" infeed, 460/3/60, 2004
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 1620X
Year: 2004
Used 16" x 20" Cumberland 1620X Granulator, 20 HP Open 3-Knife Slant-Cut Scooped Rotor, 2 Offset Reversible Bed-Knives 16" x 20" Feed Throat 16.5" Cutting Circle Infeed: 54" 3/8" Screen Size Bottom Gravity Discharge High-Inertia Flywheel and Rotor Integrated Rotating End Discs Swing-Down Screen Cradle V-Belt Drive ...more
JUST ADDED!
16" x 24" Granutec #TFG-1624-AM50-10, Granulator, 50 HP, (5) rotor knives, 0.38" screen, auger infeed, 7.5 HP blower & cyclone, 2004
KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Granutec
Model: TFG 1624 AM50 10
Year: 2004
Used Granutec TFG 1624 AM50 10 (2004) Granulator for Sale. This unit has a 16″ x 24″ hopper size opening and a five-knife rotor driven by a 50 HP motor, with a 0.38″ screen. Dual infeed options are provided: the main hopper opening plus an auger infeed for smaller parts. The machine is a unitized ...more
JUST ADDED!
16" x 24" Granutec #TFG1624-50, open rotor granulator, 50 HP, 3 knife open rotor, 2 bed knives
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Granutec
Model: TFG1624-50
Get email updates for newly added Plastic Granulators and Pelletizer Machines
Plastic Granulators and Pelletizer Machines (also known as plastic shredders and pelletizing systems) are used to reduce plastic materials into smaller granules or pellets for reuse or further processing. Commonly used in recycling, manufacturing, and packaging industries, they are ideal for processing plastic waste, film, or extruded products. These machines are essential for efficient material recovery and ensuring consistency in plastic production.
JUST ADDED!
16" x 24" Nelmor #1424, Plastic Granulator, 60 HP, 3 rotor knives, 2 bed knives, 0.38" screen, unitized control panel, 480 V.
KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nelmor
Model: 1424
Used Nelmor 1424 Granulator for Sale. This unit has a 16″ x 24″ throat opening and is driven by a 60 HP motor on 480v power. The cutting chamber is fitted with 3 rotor knives working against 2 bed knives, and it is set up with a 0.38″ screen. It is a unitized control panel and an extended hopper size ...more
16" x 28" Cumberland #16X28, Granulator, 3-Blade Open Rotor, 20 HP, 208 V, 2002
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cumberland
Model: 16X28
Year: 2002
Used Cumberland granulator, model 16X28, 16" x 28" grinding chamber, 3 blade open rotor, 20 hp, 208 volt motor, serial# CA083050-02014, built 2002.
16" x 29" Nelmor #G16295PL, granulator, 40 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G16295PL
Used 16" x 29" Nelmor Granulator, Model G16295PL, 40 Hp 80" Infeed Height 3 Knife Closed Rotor, 2 Bed Knives Screen Size: 7/16" Dual 20 HP Lincoln Electric Type KM AC Motors 230-460/3/60, 49.6A/24.8A - *EACH* Frame 256T Currently Has Gravity Discharge Has Starter Control Panel For Main Motor Approximate Dimensions: ...more
16" x 29" Nelmor #G16295PL, granulator, 40 HP, 80" infeed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G16295PL
Used 16" x 29" Nelmor Granulator, Model G16295PL, 40 HP 80" Infeed Height 3 Knife Closed Rotor, 2 Bed Knives Screen Size: 7/16" Dual 20 HP Lincoln Electric ODP AC Motors 230-460/3/60, 49.6A/24/8A - *EACH* 1750 RPM Frame 256T Currently Has Gravity Discharge Has Starter Control Panel For Main Motor Approximate ...more
16" x 40" Cumberland #1640X, granulator, 30 HP, 3 knife open rotor, 2 bed knives, hydraulic hopper tilt, 2007
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 1640X
Year: 2007
Used 16" X 40" Cumberland 1640X Granulator, 30 HP, New In 2007 Three Knife Open Rotor, 2 Bed Knives 3/8" Screens 16.54" Cutting Circle 30 HP Motor, 1775 RPM, 575V 437 RPM Rotor Speed Hard Faced Rotor And Cutting Chamber Rotating End Disks Hydraulic Hopper Tilt Approximate Dimensions: 80" Lx 72" W x 88" H Approximate ...more
16" x 40" Cumberland #1640X, granulator, 3 rotor knives, 2 bed knives, 50 HP, 5/16" screen, 480 V., 3 Phase, 2007
KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cumberland
Model: 1640X
Year: 2007
Used Cumberland 1640X (2007) Granulator / Shredder for Sale. This unit has a 16″ x 40″ H throat opening, (3) rotor knives working against (2) bed knives, and a 50 HP drive. It is fitted with a 5/16″ screen and includes 2 extra screens, plus extra knives. A hydraulic lift is provided for easier screen ...more
17" x 12" Cumberland #1212X, material granulator, 10 HP, 3 rotating & 2 bed knives, 2017
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Cumberland
Model: 1212X
Year: 2017
Model: 1212X, Hp: 10, Processing Capacity: 500 lb./hr, Rpm: 1,755, Cutting Chamber Width In: 12", Cutting Chamber Height In: 12", Voltage: 460/3/60Hz, Amps: 11.6 FLA, Feed Throat Size: 17" x 12", Blade Configuration: 3 rotating knives and 2 bed knives, Rotor Style: Open, Discharge: Side and metal collection bin.
17" x 14" Nelmor #AG88M, plastic granulator, 1 HP, auger feed, 1997, #52682
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Nelmor
Model: AG88M
Year: 1997
SERIAL. 97E00443, MODEL. AG88M, ID. 05402W, YEAR NEW. 1997, HOPPER OPENING. 17" X 14", AUGER FEED. YES, MOTOR. 1 HORSEPOWER.
17" x 36" Conair #Viper-17-Series, granulator, tangential feed, 3 blade open rotor, 5/16" screen, 40 HP, 6" blower discharge, 2020
KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Conair
Model: VIPER 17 SERIES
Year: 2020
Used Conair Viper 17 Series (2020) Granulator / Shredder for Sale. This unit has a 17″ x 36″ opening with tangential feed and a (3) blade open rotor working against single bevel fixed bed knives. It is fitted with a 5/16″ screen and driven by a 40 HP motor, with operation handled through a unitized ...more
17"/23" x 43" Cumberland #43, granulator, closed rotor or open rotor, 3 to 5 fly knives, 2 bed knives, 100 -200 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 43
• Manufacturer: Cumberland, • Model: 43, • Equipment Type: Granulator, • Condition: Used, • Cutting Width: 43", • Bed Knives: 2.
JUST ADDED!
17" x 43" Cumberland #43, plastic granulator, 3-knife solid rotor, 43" knives, 200 HP, 220/440 V., feed hopper, Sterling cyclone & blower
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cumberland
Model: 43
Year: 1900
Make: Cumberland, Model: 43, Year: 1900, Machine Location: Canada, Model 43 Granulator, – 17 x 43″ Feed Opening, – 3 Knife Solid Rotor, – 200 HP 3/60/220/440 Volt Motor, – 43″ Knives, – Feed Hopper – Base – Hinged Swing Away Sides, – Sterling Cyclone – ...more
18" x 15" Foremost #HD-6, Plastic Granulator/Grinder, 400 lbs./hr. capacity, 15 HP, 440 V.
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Foremost
Model: HD-6
Foremost plastic granulator/ grinder. Unit is model HD-6 with carbon steel contact parts, complete with 15 HP motor drive, 440 volt. Unit s 18" diameter x 15" wide grinding chamber, with inlet at 14" front to back, 15" left to right. Mill designed for use with sizing screens, not included. This HD series mill is ...more
JUST ADDED!
18" x 20" AEC #1820, industrial plastic granulator grinder, 50 HP, 460 V., 3-phase
Metal Logics Inc | Seymour, IN
Seller: Metal Logics Inc
Location: Seymour, IN
Mfr: Aec
Model: 1820
AEC 50HP Plastic Granulator Grinder 1820 18" x 20" 460V 3PH Industrial AEC Industrial Plastic Granulator Grinder, Model: 1820, Serial #: CI036250-12002, 50 HP, Voltage: 460, Phase: 3, Frequency: 60 Hz, Largest Motor Rating: 56.9 Amps, Cutting Chamber: Approximately 18" x 20", Rotor Type: Tangential, Rotor Knives: 3 ...more
18" x 24" Conair #CW1824, granulator, 3-knife open rotor, 25 HP, 460 V. motor, sound enclosure, 2007, #40880, 2007
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Conair
Model: CW1824
Year: 2007
Used Conair granulator, model CW1824, 18" x 24" feed opening, 3 knife open rotor, 25 hp, 460 volt motor, with sound enclosure, serial# 491-100708.1, built 2007.
18" x 24" Polymer Systems #1824PST, granulator, 40 HP, 3 knife open rotor
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polymer Systems
Model: 1824PST
Used 18" x 24" Polymer Systems Granulator, Model 1824PST Tangential Feed Cutting Chamber, 3 Knife Open Rotor, Double Angle Cut, 16" Cutting Circle, 40 HP Baldor Motor 2,100 LBS/HR Listed Average Throughput, 7/16" Screen, 3 HP Blower Discharge, 64" Infeed Height S/N: 604702, 460 Volt MISSING PIPING BETWEEN AIR-VEYOR ...more
18" x 31" Rapid #CK1831, granulator (2 available)
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CK-1831
Used 18" x 31" Conair Granulator, Model CK1831, 40 HP 5 Knife Open Rotor, 2 Bed Knives 60" Infeed Height 32" Wide Pull Rolls, 80" Pull Rull Infeed Height Approx. Rotor Speed: 543 RPM Pneumatic Hopper Tilt Belt Driven By 40 HP WEG Motor, 324/6T, Belt Ratio Approx. 3.26:1 Motor RPM: 1770 460/3/60, 65 FLA AC Tech MC ...more
18" x 31" Rapid #CK1831, granulator, 50 HP motor
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CK1831
Used 18" x 31" Conair Granulator, Model CK1831, 40 HP 5 Knife Open Rotor, 2 Bed Knives 60" Infeed Height 32" Wide Pull Rolls, 80" Pull Rull Infeed Height Approx. Rotor Speed: 543 RPM Pneumatic Hopper Tilt Belt Driven By 40 HP WEG Motor, 324/6T, Belt Ratio Approx. 3.26:1 Motor RPM: 1770 460/3/60, 63 FLA AC Tech MC ...more
JUST ADDED!
18" x 36" Rapid #CW1836, Pull Roll Granulator, 5 knife open rotor, 2 bed knives, 75 HP, 460 V., air discharge, pneumatic clamp, control cabinet, 2019
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rapid
Model: CW1836
Year: 2019
Used 18" x 36" Rapid Pull Roll Granulator. Model CW1836, serial #RA-501.242260.20, new 2019. Has 5-knife open rotor, 2 bed knife. Driven by a 75hp motor, 460/3/60. Includes direct drive pull rolls with pneumatic nip, electric chamber assist, swing cradle for easy clean out, air-veyor discharge, and stand alone panel. ...more
18" x 36" Rapid #CW1836, Pull Roll Granulator, 75 HP, 5 Fly Knife Open Rotor, Direct Drive Pull Rolls, Air-Veyor Discharge, 2019
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rapid
Model: CW1836
Year: 2019
Used 18" x 36" Rapid Pull Roll Granulator, Model CW1836, 75hp, New in 2019 5 Fly Knife Open Rotor, 2 Bed Knife 75hp Motor Air-Veyor Discharge Direct Drive Pull Rolls with Pneumatic Nip Electric Chamber Assist Swing Craddle for Easy Clean Out Stand Alone Control Panel 460/3/60- 103 Amps Serial Number: RA-501.242260.20.1.
18" x 37" Cumberland #1837, Granulator, 5-Knife Rotor, 18.5" width Knives, 100 HP, 1780 RPM, 460 V, Gravity Discharge, On Leg Base
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: 1837
Used Cumberland Model 1837 granulator. Has 18" X 37" feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), each knife being Approx. 18.5" wide, 2 bed knife., Belt driven by a 100 HP 460 volt only 1780 rpm motor. and gravity discharge. All mounted on leg base, swing out chamber door on downstroke ...more
Cumberland #37B, Industrial Plastic Granulator, 18" x 37" feed, 100 HP, 460 V.
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cumberland
Model: 37B
used-cumberland model 18x37 granulator with 18" x 37" feed throat, designed for film granulation. s a 5-knife steep angle step adjustable rotor with 10 knife segments and (2) bed knives. belt driven by a 100 hp, 460 volt, 1780 rpm motor with gravity discharge. a 6" diameter x 37" wide knurled and grooved offset feed ...more
18" x 37" Cumberland #37B, granulator, 3 fly & 2 bed knives, heavy duty double roller bearings
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 37B
##Per Factory Literature:, Motor:** 200HP 1780RPM 3/60/460 Volts, **Capacity:**, Maximum Throughput:, 1700-2500 lbs./hr Per Factory, **Feed Throat:**, Feed Opening Size: 18" x 37" (457mm x 940 mm), **Cutting Chamber:**, Bed Knives: 2 or 3, Rotor Knives: 8, Rotor: Solid, Internal Surfaces: Machined for Easy Cleaning ...more
18" x 37" Cumberland #37H, hog granulator, 100 HP, 15 fly knives, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 37H
Used 18" x 37" Cumberland Granulator, Model 37H Hog Style Rotor 15 Fly Knives, 2 Bed Knives 3/4" Screen 100 HP AC Motor NEW FLY KNIVES NEW BED KNIVES DOES NOT INCLUDE STARTER PANEL - NEW PANEL CAN BE QUOTED Approximate Dimensions: TBD.
18" x 37" Cumberland #37H, hog style rotor, 100 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 37H
Cumberland Model 37H granulator with an 18" x 37" cutting chamber, 100 HP motor, and hog-style rotor., • Manufacturer: Cumberland Engineering / ACS Group, • Model: 37H, • Equipment Type: Granulator, • Condition: Used, • Cutting Chamber: 18" x 37", • Motor: 100 HP, • Rotor Type: Hog ...more
18" x 37" Cumberland #37H, hog granulator, 100 HP, 15 fly knives, 2 bed knives, 82" feed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 37H
Used 18" x 37" Cumberland Granulator, Model 37H, 100 HP Hog Style Rotor, 15 Fly Knives, 2 Bed Knives 16" Cutting Circle, 8" Airveyor Discharge 82" Feed Height S/N 250400-81-002 Approximate Dimensions: 96" L x 72" W x 98" H ROTOR TURNS FREELY NO NAMEPLATE ON MOTOR PROJECT MACHINE - NEEDS WORK - SOLD AS-IS.
18" x 42" Gloucester #CMG-G1842, granulator, 100 HP, 3-knive open rotor, 2 bed knives, TEFC enclosure, 2004
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
Model: G1842
Year: 2004
Used 18" x 42" Gloucester CMG G1842 Granulator, 100 HP, New In 2004 18" x 42" Feed Throat In-feed Height: 68" 5 Knife Open Rotor 2 Bed Knives 1/2" Screen 100HP, WEG Severe Duty, M05J-9686EM, Frame 404/5T 460/3/60, 114A (131.1 SFA) 1775 RPM TEFC Enclosure Control Panel with Blower Circuit and Main Motor Soft Start ...more
Zerma #GSH-500/1000, Granulator, 75 kW, 19.5" diameter x 39" L, Open Rotor, 400-600 kg/hr, 2012
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Zerma
Model: GSH-500/1000
Year: 2012
used- zerma model gsh 500/1000 granulator. 19.5" dia. x 39" st. side (500 mm dia x 1000 mm st. side). open rotor. rotor is belt driven by a 75 kw (112.5 hp). approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). includes control panel. new 2012. overall dimensions: 65" (1995 mm) x 73" (2255 mm) x 89" ...more
JUST ADDED!
19-7/8" x 19-7/8" Conair Wortex #2028-HD, Plastic Granulator, 3 fly/2 bed knives, conveyor, control panel, 50 HP
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Conair Wortex
Model: 2028-HD
Used Conair Wortex Granulator, 50HP, Conveyor included, Complete with control panel, Well maintained, Hopper opening dimensions 19'' 7/8 x 19'' 7/8, 3 fly 2 bed knives.
JUST ADDED!
19-7/8" x 21-1/8" Conair Wortex, Plastic Granulator, 3 fly/2 bed knives, blower, control panel, 50 HP
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Conair Wortex
Used Conair Wortex Granulator, Blower included, 50 HP, 3 fly, 2 bed knives, Complete with control panel, Well maintained, Hopper opening dimensions 19'' 7/8 x 21'' 1/8, This machine was working without any problems, but it had a cylinder issue with the part that raises the hopper..
20" x 20" Conair Wortex #HD2020, granulator, 30 HP Lincoln Motor, 3 Fly Knives, 2 Bed Knives, Tangential Cutting Chamber
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: HD2020
20" X 20" Conair Wortex HD2020 Granulator, 30 HP 3 Fly Knives, 2 Bed Knives 30 HP Lincoln Motor Tangential Cutting Chamber Starter Panel Includes 5 HP Blower, Cyclone & Stand.
20" x 28" Zerma #GSC-500, granulator, 5 rotor knives, 57 HP, 0 hours, 2017
KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Zerma
Model: GSC 500
Year: 2017
Used Zerma GSC 500 (2017) Granulator / Shredder for Sale. This unit has a 20″ x 28″ throat opening, a five-knife rotor, and a 57 HP drive. Listed with 0 hours of use. a cyclone material evacuation system with bag house, soundproof enclosure, amp feedback on the controller, blower (no cyclone), and a ...more
JUST ADDED!
20" x 30" Granutec #TFG2030, Granulator, 2,500 lbs/hr, open type rotor, discharge conveyor, 230/460 V.
Rycat Machinery | Elmhurst, IL
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Granutec
Model: TFG2030
Max Throughput 2500 lbs./hr, Feed Opening/Throat Size 20" x 30", Rotor Open type, Model # TFG2030, Voltage 230/460V, Shipping Weight 7500.0 lbs., GRANUTEC TFG2030.
Desislava Industrial #500/800, Granulator, 20" x 31" Chamber, 20 HP, 460 V., 5-row open rotors
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 500/800
used desislava granulator model 500/800 is an industrial-grade granulator designed for efficient size reduction of plastic waste materials. powered by a 20 hp electric motor, this unit operates on 3/60/460 volt, providing robust performance for recycling processes. the machine s a 20" x 31" chamber opening (500 mm x ...more
20" x 50" Cumberland #5018, granulator, 300 HP, 18 knife hog style rotor, 2 bed knives, belt driven
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 5018
The Cumberland 5018 Granulator is a robust, high-capacity granulation system designed for efficient size reduction of plastic scrap and other similar materials. With a wide 50" cutting chamber and rugged construction, this unit is well-suited for post-industrial recycling applications involving film, injection-molded ...more
20" x 50" Cumberland #50Gran, granulator, 150 HP, 1780 RPM, Fr.445T, TEFC
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50GRAN
Used 20" x 50" Cumberland 50Gran Granulator, 150 HP, Model 3KN Infeed Height: 68" (No Hopper) 33" Clearance Gravity Discharge 3 Knife Open Rotor Design 2 Bed Knives1/4" Screen Size 150 HP North American Electric Crusher Series Motor, Cat. No.: PE445T-150-4C 460/3/60, 171A 1780 RPM, Frame 445T, TEFC Includes ABB ...more
20" x 50" Cumberland #50H, granulator, 100 HP, 18 fly knives, 2 bed knives, hog rotor
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50H
Used 20" x 50" Cumberland 50H Granulator 18 Knife Solid Hog Rotor, 2 Bed Knives 100 HP AC Motor New Fly Knives And Bed Knives New In-Feed Hopper Built From Existing 50H Hopper Flange New Control Panel Consisting Of New Cabinet New WEG Soft Start New Wiring New Blower Contactor(Buyer To Specify Size) New Timer For ...more
20" x 50" Cumberland #50H, granulator, 18 knife hog style rotor, 150 HP, 1986
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: 50H
Year: 1986
Used Cumberland Model 5018H Granulator, 20" x 50" throat opening with 18 knife hog style rotor, Rotor is belt driven by 150 hp motor, 460 volt, 1175 rpm TEFC motor, 16"od motor sheeve, 26"od rotor sheeve, (2) bed knives (4 pieces) with (1) in the raised position, 160mm rotor bearings with air purge, Cutting chamber ...more
22" x 20" FBE Corp. #SR-1517, Granulator, 1.5 kW, 1730 RPM, 230/460 V.
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Fbe Corp.
Model: SR-1517
22" X 20" OPENING, 1730 RPM.
22" x 21" Milacron #MBG-18, Plastic Granulator, 7.5 HP, 73" infeed H, 460 V., 3-Ph., 60 Hz, 2006
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: MBG-18
Year: 2006
Used 22" x 21" Milacron MBG-18 Granulator, 7.5 HP 3 Knife Open Rotor, 2 Bed Knives Infeed Height: 73" Screen Size: 1/4" 460/3/60, 12A Belt-Driven Rotor Serial Number: 4183A01/06-30 New In 2006 Approximate Dimensions: 63" L x 60" W x 72" H, 1,820 LBS.
22" x 24" Rotogran #WO-2224, granulator, 40 HP, Nema 3 Starter Control, 3 knife open rotor, 2 bed knives, 2000
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rotogran
Model: WO2224
Year: 2000
Used 22" x 24" Rotogran Granulator, Model WO2224, 40 HP, New in 2000 3 Knife Open Rotor, 2 Bed Knives, 1/2" Screen, 2" Air-Veyor Discharge Nema 3 Starter Control, 77" Infeed Height, 40HP, 1775 RPM 230/460V U.S Electrical Motor Model R908 Serial Number: FG222240011118WO 1,600 - 2,400 LLBS/HR New In 2000 KNIVES HAVE ...more
22" x 38" Sem Nemor #G2238, granulator, 100 HP, 5 knife solid rotor, 1 HP hydraulic assist
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Sem Nemor
Model: G2238
SEM Nelmor G2238 used granulator for sale In-feed: Rear In-feed with Air Transport Inlet Cutting Chamber: 22 x 38 with 1 HP hydraulic assist Rotor: 5 Knife Solid Bed Knives: D2 Tool Steel, 2 Positions (4 pcs) Screen: 1/2 (2 pc) Manual Hydraulic drop-down cradle Base: 97 x 76 Common Plate Discharge: 10 OD Airveyor ...more
Nelmor #G2244, plastic granulator, 22" x 44" opening, (3) rotor blades, (2) bed knife sets, 5 HP blower
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nelmor
Model: G2244
NELMORE - G2244: GranulatorOpening: 22" x 44".(3) Rotor Blades.(2) Bed Knife Set: (2) Blades per set.Tangential Feed: Opti-Angle Cutter configuration.GAYLORD Dumper.Infeed Conveyor with: Speed Control.5 HP Blower.Cyclone.
Nelmor #RG2257, Granulator, 22" x 57" Feed, 150 HP, 5-knife rotor, Clam Shell Chamber, 10" Airveyor Discharge, OEM Controls, 460 V., 3000 PPH
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nelmor
Model: RG2257
used- nelmor model rg2257 granulator. 22" x 57" feed throat. 5 knife (15 pcs) open rotor with 2 bed knife positions (6 pcs). top in-feed. 150 hp 460-volt 1785 rpm bador super-e motor. 10" od airveyor discharge. clam shell split chamber is powered by 3 hp hydraulic pump. drop down airveyor is hydraulically operated by ...more
23" x 29" Nelmor, plastic granulator, 30 HP, Rotor is in very good shape
Mullin Machinery | Farmingdale, NJ
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Nelmor
Product, Nelmor Model G12295P1 Plastic Granulator, Total Hp- 30- (2) 15hp Motors, Opening- 12 x 29″, Blades are in need of sharpening- normal wear., Rotor is in very good shape, Weight- 3000 lbs.
23" x 43" Cumberland #43S, granulator, dual flywheels, 100 HP, mounted on stand, with controls
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 43S
43" Wide Cutting Chamber, 3 Fly Knives & 2 Bed Knives, Approximate 23" x 43" Throat Opening, Dual Flywheels, 100 hp 460 volt, Mounted On Stand, With Controls.
