151 - 187 of 187 listings
27" mm, Leistritz #ZSE-27-HP-PH-40D, Twin Screw Pharma Extruder System, 10 barrel, 500 RPM, 40:1 L/D, w/ K-Tron Feeders, 2008
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ZSE-27-HP-PH-40D
Year: 2008
used leistritz zse 27 hp-ph-40d twin screw extruder system pharma grade with k-tron feeders & full package. capacity 200 kgs/hr (440 lbs/hr.). co-rotating, (2) 27 mm diameter side by side screws, 40:1 l/d ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. hastelloy c-276. driven by a ...more
30" mm, APV #PGX-30, Twin Screw Extruder, K-Tron T22 Compounding System, 10:1 L/D, 66 PPH, 161 RPM
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: PGX-30
used apv pgx 30 twin screw extruder with k-tron t22 feeder compact pilot compounding system. 30 kg (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 l/d ratio. electrically heated water cooled barrel. driven by a 4 kw (5.36hp) -440-volt ac drive motor via a gear box. screw speed maximum 161 rpm. frame ...more
30" mm, Werner & Pfleiderer #ZSK 30-W9/2, Twin Screw Extruder, 33:1 L/D, 8 barrel, 500 RPM
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ZSK
used coperion werner & pfleiderer zsk 30-w9/2 twin screw extruder high-speed lab & production compounding system. (2) 30 mm diameter side by side screws, 33.3:1 l/d ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. driven by a 10.4 kw(14hp) -440-volt ac drive motor via a ...more
36" Rosenthal #WM3HUJEAAAPLCC-24, Servo-Driven Sheeter, Integral Unwind, 750 lb, AB Control, 240 V., variable speed, casters
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Rosenthal
Model: WM3HUJEAAAPLCC-24
used- rosenthal model wm3hujeaaaplcc-24, 36" sheeter. integral unwind with 3" air shaft, 6" chucks, brake, and dancer. unwind rated at 750-pound capacity. allen bradley panel view 300 plc control. servo driven. integral variable speed belt run off table. caster mounted. locking feet. 240v. serial# 81227.
40" Werner & Pfleiderer #ZSK-50-MCC, Twin Screw Extruder, w/ Side Feeder, 920-1056 RPM, 34432 hours, 2000
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK-50-MCC
Year: 2000
used coperion werner & pfleiderer zsk 50 mcc twin screw extruder 40mm high-speed compounding system with side feeder, co-rotating, (2) 40 mm diameter side by side screws, 54:1 l/d ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. driven by a 181 kw (242.72hp) - 470 volt dc ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
50" mm Xinda #PSHJ-50, Compounding Extruder Line, Twin Screw Plastic, 500 RPM, 460 V., 3ph, 2007
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: PSHJ-50
Year: 2007
Make: Xinda, Model: PSHJ-50, Year: 2007, Machine Location: Ohio, Model: PSHJ-50, Barrel Diameter: 50mm, L/D Ratio: 40:1, Output Capacity: Approx. 500 kg/hr (material dependent), Screw Speed: Up to 500 RPM, Main Motor: 45 kW, Heater Power: 28 kW, Water Pump Power: 0.55 kW, Power: 460V / 60 Hz / 3-Phase, s:, Parallel ...more
58" mm Coperion #Mega-Compounder, Extrusion System, 34:1 L/d, 900 RPM, 500 HP, water cooled, 5,000 LB/HR, 450 GPM, Gala Underwater Pelletizer, 2002
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: MEGA-COMPOUNDER
Year: 2002
used coperion 58mm mega compounder extrusion system | 500 hp | 5,000 lb/hr | gala underwater pelletizer. 900 rpm screw speed, 34:1 approx. l/d ratio, 10 barrel section additional images flender gearbox directly coupled to 500 hp dc motor & drive hmi touchscreen interface electrically heated, water ...more
60" Davis Standard, Co-Ex Sheet Line, 4.5" Extruder 30:1 L/D 300 HP, 3" Co-Extruder, 58" Die, 60" Roll Stack, Shear, Sheet Saws, AB PLC, 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2001
60” Wide Davis Standard Co-Ex Sheet Line Lines Consists Of The Following Pieces: 4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio ...more
66" Davis Standard, coex sheet line, 4.5" & 2" extruders, 32:1 L/D ratio, 300 HP, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2000
66" Wide Sheet Line Consisting Of The Following Pieces: 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Drive(NEW IN 2016), Vented Barrel With 5.36 HP Vacuum Pump, 6 Zone Air-Cooled Barrel, 10 Die Zones, 600 AMP ...more
70" mm, Coperion Werner & Pfleiderer #ZSK-70-F175E, Twin Screw Extruder, Co-Rotating Compounding System, 23:1 L/D, 6 section, 198 RPM, 1996
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ZSK-70-F175E
Year: 1996
used- coperion werner & pfleiderer zsk 70 f175e twin screw extruder, co-rotating, (2) 70 mm diameter side by side screws, 23:1 l/d ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. driven by a 108 kw-330-volt ac drive motor via a piv gear box. screw speed maximum 198 rpm. frame ...more
90" mm Theysohn #TSK-090, Twin Screw Co-Rotating Compounding Line, 36 L/D, 300 RPM, 500 kg/hr, Underwater Pelletizer
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: TSK-090
used- theysohn tsk 090, 90 mm twin screw co-rotating compounding line. plastic compound and masterbatch, pe, pp 500 kg/h. segmented screw and barrel. 36 ld. underwater pelletizer. pellet water cooler and centrifuge dry system. n: 300/1 min. gearbox reduction.
95" mm Coperion #STS-95, Twin Screw Extruder, water cooled, 300 RPM, 40:1 L/D, Siemens Gearbox, Co-Rotating, 2010
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: STS-95
Year: 2010
used coperion sts 95 twin screw extruder | 95mm | 40:1 l/d | 280 kw dc drive | siemens gearbox | co-rotating compounding line | available aug 2026, (2) 95 mm diameter screws, 40:1 l/d ratio, co-rotating inter-meshing side by side screw design, 10 total barrel sections, (9) heated barrels ...more
100" mm Leistritz #ZSE-100-GLAAX, Co-Rotating Twin Screw Extruder, electric heat, water-cooled, 442 HP, 1600 RPM, 7,515.6 hours, 2002
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-100-GLAAX
Year: 2002
used leistritz zse 100 glaax 100mm co-rotating twin screw extruder, driven by 330 kw (442 hp), 1600 rpm dc motor with scr control. has 300 rpm screw speed, rated at 5000 newton meters per shaft torque capability and electrically heated water cooled vented barrel. has twin screw side feeder. has 7515.6 hours on the ...more
100" mm Buss, kneader, w/ 9:1 L/D barrel, jacketed barrel, 75 HP, w/ underwater pelletizer, spin dryer, 2022
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Year: 2022
used 100mm buss kneader system with hot feed extruder & gala underwater pelletizer | 200 hp | 2,000 lb/hr pvc line, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. includes operator control panel. kneader will discharge into approximately 5.5" o.d. (140mm) hot feed extruder with ...more
140" mm ICMA San Giorgio, Twin Screw Extruder, 36:1 L/D, Co-Rotating, Segmented Screws, Screen Changer & Pelletizer, overhauled
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used icma san giorgio 140mm twin screw extruder | 36:1 l/d | co-rotating | segmented screws | screen changer & pelletizer. segmented screws. reinforced gearbox & motor. electric panel overhauled in 2015, touch control added. incl. screen changer and dry pelletizing unit. previously used on ...more
APV Baker Perkins Twin Screw Extruder, type MP50/25D, 25:1 L/D, 2017
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Baker
Year: 2017
used- apv baker perkins twin screw extruder, type mp50/25d. 50 mm dia. twin screws. 25:1 l/d. co-rotating. electrically heated, water cooled. max screw speed 500 rpm via a gearbox by a 55.2 kw (74hp)-3/50/400v ac motor. max output capacity 150 kgs (330 lbs) per hour. complete with feeding system, die head, control ...more
Black Clawson, Davis Standard #4.5-EXTR-B, extruder, 30:1 L/D ratio, 2.5", 2009
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Black Clawson
Model: 4.5-EXTR-B
Year: 2009
Make: Black Clawson Davis Standard, Model: 4.5 Extruder, Year: 2009, Machine Location: Upon Request, Extruder #1: 2.5″, 30:1 L/D Ratio, Process Tension Ranges *1: Low Range 5 – 50 Lbs. / High Range 50 – 150 Lbs., Extruder #2: 2.5″, 30:1 L/D Ratio, Hand of Machine Except Winder/Drive Side *4: ...more
Buss #MKS-30, laboratory Ko-Kneader extruder, 1.18" diameter x 17" length, 1997
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Buss
Model: MKS-30
Year: 1997
used- buss model mks 30 laboratory ko-kneader extruder, serial# 97-1030 (1997). 30mm diameter x approximate 17" long single screw. throughput rates up to 30kg per hour. 3 zone barrel electrically heated, water cooled. water cooled feed throat with hopper. driven by a 10 hp, 3/60/230/460 volt, 1740 rpm ac motor with ...more
Cincinnati Milacron Horizontal Sheet Line Downstream, 66" width x 12" diameter rolls, 4.55 FPM, w/ gantry cranes & conveyor, 5500 hours, 2012
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Year: 2012
Used 66" Wide Cincinnati Milacron Horizontal Sheet Line Downstream, New In 2012 66" Wide x 12" Diameter Rolls Hydraulic Roll Pressure 4.55 FPM Line Speed Rolls Individually Driven By.5 HP 1760 RPM Baldor Vector Duty Motors Through 1206:1 Gearboxes 66" Wide X 8" Diameter Rubber Pull Rolls, 4.55 FPM, Driven By 1 HP 1750 ...more
Crown Single Screw Extruder, 2.5" diameter, 36:1 L/D Ratio, Rebuilt To Specification In 2015
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Crown
Year: 2015
Make: Crown, Model: 2.5" Single Screw Extruder, Year: 2015, Machine Location: Upon Request, Expected Rate: 10-200 Kgs/hr., Extruder : 2.5” Dia., 36:1 L/D Ratio, Barrel Centerline: 40″, Horsepower: 75HP, Drive: AC, Screw RPM: 140, Max PSI: 10,000, # of Barrel Zones: 5, Cooling: Closed Loop Cooling System ...more
Entex #TP-WE-150/600-M1, planetary roller extruder, 75KW, Allen Bradley Panelview Plus 1500 Touchscreen control panel, 2014
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Entex
Model: TP-WE 150/600-M1
Year: 2014
Entex Planetary Roller Extruder, Model TP-WE 150/600-M1, 75KW, New in 2014 Knodler Direct Drive Motor/Gearbox Sytem: 75KW Screw/Central Spindle Speed: 50rpm Allen Bradley Panelview Plus 1500 Touchscreen Control Panel 480/3/60 Two Station Feed System with Schenck Process Feeders, Model MechaTron GRLS27 Parts Included: ...more
Everplast #EMS-65, extrusion line with melt pump & autoloader, 65mm, 28:1 L/D, 30 HP, air cooled, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Everplast
Model: EMS-65
Year: 2019
Used 65mm Everplast Extrusion Line Consisting Of The Following: 65mm Everplast EMS-65 Single Screw Extruder, 28:1 L/D, 30 HP 3 Barrel Zones, 3 Downstream Zones, Air Cooled Centerline Height: 1050mm (41.34") Screw Speed: 60 RPM 4" x 24" Everplast ETB-05 Belt Puller, 2 HP Approx. 764 LBF Pulling Force Approx. 164 FPM ...more
Farrel Continuous Compounding Line, Mixer, Extruder, Strand Pelletizer, 1985
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Farrel
Year: 1985
used- farrel continuous compounding line, consisting of: farrel continuous mixer, model 6 fcm-um, built 1985. farrel 10" dump extruder, 9 to 1 l/d ratio, with hydraulic ram stuffer on feed throat, 10" diameter feed screw, variable lead w/ blocks. driven by a 300hp motor. farrel model 65a gear reducer, sn 2189-1 ...more
Farrel Continuous Compounding Line, FCM-UM Mixer, Hot Melt Extruder, Gala Underwater Pelletizer
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Farrel
used- farrel continuous compounding line, consisting of: farrel model 6 fcm-um continuous mixer, serial#65a2189-2. driven by a 600hp westinghouse motor. farrel 10" hot melt extruder. screen changer. gala underwater pelletizer system. gala spin dryer with dewater system. acrison feed system w/ 6 additive feeders. heat ...more
Battenfeld, Gloucester, horizontal sheet line, 56" wide, Proface touch screen, 480 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barrel, Model 3.5TM III-30, S/N 87089, New In 1987 54" Wide EDI R75 Sheet Die, Includes Extra Die Lips 56" Wide X ...more
Hartig extruder, 30:1 L/D pelletizer, used
Alan Ross Machinery Corp | Zion, IL
Category: Extruders and Extrusion Lines
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hartig
150 HP Motor, 480 Volts, Non-Vented Extruder, Air Cooled, 150 HP Motor, 480 Volts, DC Drive w/ Screen Changer, 4 1/2" Screw & Barrel Diameter, 11' Long Screw.
Koellmann #UNEX-8.13, gearbox for Welex extruder, 8.71:1 gearbox ratio, 500 HP @ 1750 RPM
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Koellmann
Model: UNEX-8.13
Koellmann UNEX 8.13 Gearbox For Welex Extruder 8.71:1 Gearbox Ratio Rated To 500 HP Input RPM 1750 Output RPM 200 S/N 29713400 Mechanically Driven Oil Pump With Heat Exchanger.
Lantai #SHJ-38, twin screw extruder, water cooled, 40:1 L/D, 40 HP, side feeder, 38mm, 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Lantai
Model: SHJ-38
Year: 2001
Used 38mm Lantai Model SHJ-38 Twin Screw Extruder, Water Cooled, L/D 40:1, 40 HP, With Side Feeder, 2001 9 Barrel Zones, Vents In Zone 4 & 8 Infeed Height: 50" @ Side Feed, 55" @ 4" x 4" Circular Top Feed Max Screw Speed: 600 RPM Total Heating Power: 18 kW Approx. 40 HP Nanjing, Type 200L-4 Continuous Duty AC ...more
Leistritz #ZSE27-MAXX-40D, Lab Sheet Line, 29.8 kW, 1200 RPM, 320 hours, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE 27 MAXX-40D
Year: 2018
used-leistritz lab sheet line, includes the following- leistritz extruder, model zse27 maxx-40d. 29.8 kw main drive, 1200 rpm screw speed. 320 hours. (4) schenck feeders. (2) aec chilling units. (1) sterlco unit. (1) water trough. calendaring web handling stack system (roll stack os2):web alignment (pull roll 2 nip ...more
Leistritz, Side Feeder, 92 mm, 11" L x 6" width Feed Section, 39.75" Centerline, 3 kW
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Used 92MM Leistritz Side Feeder 11" L x 6" W Feed Section 3 KW(4HP) AC Motor With AC Tech Inverter Drive 39.75" Centerline(Base Will Accept Adjusting Screws, Not Included) Approximate Dimensions: 50" L x 22" W x 60" H.
Kevin Dunn and Jim Hay Sinclair and Rush, extruder
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Used 2.5” NRM PM III Extruder, 24:1 L/D, 40 HP AC Motor Single Screw, Air Cooled, Non-Vented, 4 Barrel Zones, 4 Die Zones Feed Throat: 3.5" x 3.5", Water Cooled 40 HP Baldor Reliance Inverter-Duty AC Motor, Model: IDM411OT, S/N: C1505270957 460/3/60, 47A 1775 RPM, Max RPM: 3900 Frame: 324T NRM Gearbox, Gear ...more
PTI #Trident-6500, sheet extrusion line, 6.5", 500 HP
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Pti
Model: TRIDENT-6500
used- pti trident sheet extrusion line, model 6500. 6.5" screw diameter. 36:1 l/d. 500 hp, 1800 rpm main drive. with flender gearbox; pti model h6018 sheet takeoff system; revolution roll stand; edi 54" w dies; sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of ...more
Reiser Vemag #Robot-500, Extruder, Vacuum Fill, Double Screw, 0.01-66 lbs., 450 portion/min, 5.4 HP, 8.9 CFM, 29 gallon hopper
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Vemag
Model: ROBOT-500
Year: 1900
Make: Reiser Vemag, Model: Robot 500, Year: 1900, Machine Location: Florida, Used Reiser Vemag R 500 Extruder – Vacuum Filler with Double Screw:, – Filling rate: depending on feed element up to 2,500 kg/h, – Portion weight: 5 – 30,000 g, can be set in increments of 0.1 g or 1 g, – ...more
Wayne, lab strand pelletizing downstream equipment, 30" L x 16" width x 24" Deep strand cooling tank
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wayne Extrusion
Wayne Strand Pelletizing Downstream Equipment 30" L x 16" W x 24" Deep Strand Cooling Tank Integrated Compressed Air Powered Air-Knife, S/N 8142 2" Wide Pelletizer, 1.5HP DC Motor, 230/1/60 24" Diameter Sweco Classifier, 2 Decks, 1/4 HP, 230/1/60 Previously Running Fluoropolymers(Teflon) Approximate Dimensions: Water ...more
Dr. Collin #E20T, Laboratory Blown Film Line, 20 mm sngl screw Extruder with Winder, 25:1 L/D ratio, electric heat, air cooled, 1.1 kW, 2-1/2" die, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: E20T
Year: 2014
used dr. collin laboratory blown film line consisting of: (1) dr. collin 20 mm single screw extruder, type e20t. approximate 25 to 1 l/d ratio. (2) zone non-vented barrel electrically heated, air cooled. feed throat with hopper. driven by a 1.1kw, 3/50/400-volt motor. approximate 2-1/2" diameter blown film die, (1) ...more
JUST ADDED!
Pure Loop #EVO-302-E, plastic reclaim extrusion line w/ shredder, 3-1/8" extruder, 268 HP, Erema filter, 2018
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: EVO-302-E
Year: 2018
Pure Loop Reclaim System With Integrated Shredder-Extruder Combination Model EVO 302 E Estimated Output Per The Manufacturer: 800-1,000 LBS/HR PA 6.0 Pa6.6 800-1,000 LBS/HR PET Infeed Belt Conveyor With Double Layer Metal Detector Twin Screw Volumetric Feeder For Powder Shredder With 29" X 35" Cutting Chamber, 29.45" ...more
Plastic Process Equipment, Auxiliary Line Package, matched OEM set
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Year: 1900
Make: Plast5ic Process Equipment, Inc, Model: FX-100460, MFT0754C (x2), TAL-15UFX, DH-120USD, Year: 1900, Machine Location: Utah, Equipment Overview, This auxiliary line package from Plastic Process Equipment Inc. consists of five integrated components for supporting plastic injection molding or extrusion production ...more
