36 Results
1/8" - 1-3/4" x .065" Bertolette #315, thin wall tube cut & break, #61520
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bertolette
Model: 315
SERIAL. 315392, MODEL. 315, CAPACITY. 1/8 - 1-3/4" x.065, GRIP FEED. 18" (LONGER WITH MULTI STROKING), PULL APART ATTACHMENT TO MINIMIZE BURR, STRAIGHTENER. 2-PLANE.
1/8" - 2" Modern #2A, tube cut off, rear slides, coolant system, 3 HP, 800 RPM
G-2000 | Toledo, OH
Category: Cut Off Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Modern
Model: 2A
, Model: 2A, Capacity: 1/8" - 2", Spindle Speed: 800 RPM, Equipped W/:, Rear Slides, Coolant system, Horsepower: 3, Machine Type.Clamping Machines Manufacturer.N/A Model.2A Year.N/A Condition.Used.
1/8" - 2" Modern #2E, cut-off machine, rear slides, coolant system, 3 HP, 800 RPM
G-2000 | Toledo, OH
Category: Cut Off Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Modern
Model: 2E
Model.: 2E, Capacity.: 1/8" - 2", Spindle Speed.: 800 RPM, Equipped W/:, Rear Slides, Coolant system, Horsepower.: 3, Machine Type.Tube Machinery, Cut Off Manufacturer.N/A Model.2E Year.N/A Condition.Good.
1/8" - 2-1/8" Modern #2L, tube cut off, 7-1/2 HP, 1980
D & D Industries Inc | Monclova, OH
Category: Cut Off Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Modern
Model: 2L
Year: 1980
MODEL: 2L, SERIAL #: 2308, 1/8"-2-1/8" TUBE CAPACITY, 2" SOLID BAR CAPACITY, 60" MAXIMUM CUT LENGTH, 197-3000 R.P.M. SPINDLE SPEEDS (TYPICAL), ROLLING TYPE POINT OF CUT GUARD, 2 SLIDE MACHINE FRONT AND REAR, 25' AUTOMATIC DESCRAMBLING TUBE RACK, AUTOMATIC LUBRICATION, COOLANT TANK AND PUMP, ELECTRONIC VARIABLE SPINDLE ...more
1/4" - 2" Continental #2A, pipe & tube cut-off and table, electric foot trip, stock stop, 2002
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Continental
Model: 2A
Year: 2002
SERIAL. 25-21944, MODEL. 2A, YEAR NEW. 2002, CAPACITY, OUTSIDE DIAMETER. 1/4" TO 2", MINIMUM DIAMETER WITH SPECIAL TOOLING. 1/4", HEAVIEST WALL. 1/4", DIAMETER OF CUT OFF WHEEL. 7", STROKE OF AIR CYLINDER. 4", STOCK STOP. YES, IN FEED TUBE SUPPORT TABLES MODEL. 426, ELECTRIC FOOT TRIP. YES.
Get email updates for newly added Cut Off Machines
Cut Off Machines (also known as cut-off saws or chop saws) are machines used to make quick, precise cuts through materials like metal, wood, and plastic. Commonly used in construction, metalworking, and manufacturing, these machines use abrasive or toothed blades to cut through materials with high efficiency. Cut off machines enhance productivity by delivering clean, straight cuts, making them ideal for high-volume, repetitive cutting tasks.
7/8" - 2" Continental #2A, pipe cut off, 4" stroke, electric foot trip, stock stop, #72483
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Continental
Model: 2A
SERIAL. 2A-21269, MODEL. 2A, CAPACITY, OUTSIDE DIAMETER. 7/8" TO 2", MINIMUM DIAMETER WITH SPECIAL TOOLING. 1/4", HEAVIEST WALL. 1/4", DIAMETER OF CUT OFF WHEEL. 7", STROKE OF AIR CYLINDER. 4", STOCK STOP. YES, IN FEED TUBE SUPPORT TABLES. YES, ELECTRIC FOOT TRIP. YES.
7/8" Winton #CTL-23PA, 1000" max cut length, 12 IPS max feed, CNC, microprocessor Control, 2015
Liberty Machinery Co | Lincolnshire, IL
Category: Cut Off Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Winton
Model: CTL-23PA
Year: 2015
New - 2015, Serial No. 950, Tube Diameter Capacity - Maximum (Round).7/8" in steel x 0.59" wall, Cut Length:, - Maximum.999.99", - Minimum.3.0" using pull-apart & 1.50" with partial cut, Feed Rate - Maximum.12" per second (5 Speeds), Pneumatic Supply Required.80 psi shop air, Number of Controlled Axes.1 ...more
1-1/4" - 2-1/8" Modern #2LD, automatic cutoff machine, feed rolls, double cross slides, circulating oil system
Mid Atlantic Machinery | Harrisburg, PA
Category: Cut Off Machines
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Modern
Model: 2LD
This used Modern Automatic Cutoff Machine is ready to help your business increase productivity at a far lower cost than buying a new machine. Read on for and photos, and contact us today to request a quote on this high-quality used machine., Model: 2LD1-1/4” – 2-1/8” Capacity16 Spindle Speeds – ...more
1-1/2" Pines Dynacut #15, Bijur lube system, end cropping, rebuilt controls, PLC, 1964
G-2000 | Toledo, OH
Category: Cut Off Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Pines
Model: 15
Year: 1964
, Maximum Tube Diameter: 1-1/2″ (38.1mm), Minimum Tube Diameter: 1/8″ (3.175mm), Maximum Wall Thickness:.065″ (1.65mm), Maximum Cut Length: 60″ (Standard Tools), Minimum Cut Length: 2-1/2″ (Standard Tools), Production Rate, Gross: 6,200 Pcs. Per Hour, Run Out w/Target 2′ W x ...more
2" Modern #2K, Automatic Tube Cut Off
G-2000 | Toledo, OH
Category: Cut Off Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Modern
Model: 2K
SERIAL.: 2138, MODEL.: 2K, CAPACITY.: 1/8" - 2", SPINDLE SPEEDS.: (16) 197-3030, SOLID BAR.: 2", PASS LINE.: 39", REAR SLIDE.: YES, STOCK STOP.: YES, Machine Type.Tube Machinery, Cut Off Manufacturer.MODERN Model.2K Year.N/A Condition.Used.
2" Modern #2K, cut-off machine, 1/8"-2" cap., 20' auto barfeeder, PLC controls, 1994, #5569
Presses for Industry | Detroit, MI
Category: Cut Off Machines
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Modern
Model: 2K
Year: 1994
STANDARD CATALOG :, 2-K, 1/8"- 2" CAPACITY, 16 SPINDLE SPEEDS (197-3030 ), 2" MAX. SOLID BAR, 39" TUBE PASS LINE, EQUIPMENT AND S, REAR SLIDE, STOCK STOP, ALLEN BRADLEY CONTROLS, OPERATOR GUARDING, BIJUR AUTO LUBE, 20' MODERN LONG BAR AUTO FEED SYSTEM, - MECHANICAL INCLINE HOPPER STYLE, - DESIGNED FOR LARGE AND ...more
2" -4.5" Thermatool, tube cut-off machine, 250 FPM, hydraulic accelerator hydraulic clutch, encoder
Aaron Equipment Co | Schaumburg, IL
Category: Cut Off Machines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Thermatool
Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter:.235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die., Category Machine Tools Subcategory Machine Tools.
2-1/8" Modern #2LD, cut-off machine, AB PLC, 27' barfeed, 196-3027 RPM, coolant, 1987, #9400
Greenway & Associates Ltd | Orange City, IA
Category: Cut Off Machines
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Modern
Model: 2LD
Year: 1987
875,.503,.629, 1,.630 10mm,.754,.434,.635.691,.625, 1.520 Allen Bradley PLC Coolant system 27 modern bar feed, Allen Bradley PLC, Coolant system, 27' modern bar feed (bar feed for parts).
2.25" Modern #2LD, conventional cut-off lathe, 15 HP, 1/4"- 2-1/4" capacity, roll steady rest, 1996
Aleco Machinery Sales | Milwaukee, WI
Category: Cut Off Machines
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Modern
Model: 2LD
Year: 1996
Pre Owned 1996 Modern Model 2LD Conventional Cutoff Lathe, Serial Number:, Capacity 1/4” tp 2 1/4” OD, Main Motor Horsepower 15, 1800 RPM, Spindle Speeds 196 - 3027, Air Hyd Cylinder, 15 HP Variable Speed Drive, 3rd Cross Slide, Roll Steady Rest, Swing Position, One Second Index Time, 16 Spindle Speeds ...more
2-1/4" Modern #2LD, conventional cut off lathe, 10 HP, 1 second index time, 16 spindle speeds, removable chip pan, 1996
Aleco Machinery Sales | Milwaukee, WI
Category: Cut Off Machines
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Modern
Model: 2LD
Year: 1996
Listing : Pre Owned 1996 Modern Model 2LD Conventional Cutoff Lathe Serial Number: Capacity 1/4” tp 2 1/4” OD Main Motor Horsepower 10 Spindle Speeds 196 - 3027 One Second Index Time 16 Spindle Speeds Removable Chip Pan No Thrust Main Spindle Bearings Approximate Overall Dimensions ”L X ” W X ...more
2-3/4" Hautu #RC30F, CNC double cut off, push button console, E-stop station, accelerator, electrical controls
G-2000 | Toledo, OH
Category: Cut Off Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Hautu
Model: RC30F
, Maximum Tube O.D.: 2-3/4" (69.8 mm), Minimum Tube O.D:.625" (15.8 mm), Maximum Wall Thickness:.065" (1.65 mm), Minimum Wall Thickness:.032" (.812 mm), Push Button Console, E-Stop Station, Accelerator, Electrical Controls, OVERALL DIMENSIONS: 14′ x 6′ x 7′, APPROXIMATE WEIGHT: 8,000 Lbs., Machine ...more
3" x .120" Haven #873, 25' tube length, 2.125" square tube dia. range, panel view with Burrmaster Mdl. 2, PLC Control, used
Kent Corporation | North Royalton, OH
Category: Cut Off Machines
Seller: Kent Corporation
Location: North Royalton, OH
Mfr: Haven
Model: 873
Tube Diameter Range: 3" Round, Tube Diameter Range Squares: 2.125" Square, Maximum Wall Thickness: 0.120", Maximum Incoming Tube Length: 25’, Maximum Outgoing Tube Length:120", Hand of Operation: L to R, s, Burrmaster Model 2 Deburring Unit with 24" Brushes (2)10HP Motors, PLC Controlled ...more
3" Modern #3K-LH, automatic pipe-tube-bar cut-off lathe, updated Allen Bradley Panel View 550 PLC controls
Mohawk Machinery Inc | Cincinnati, OH
Category: Cut Off Machines
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Modern
Model: 3K-LH
3" MODERN #3K-LH AUTOMATIC PIPE-TUBE-BAR CUT-OFF-LATHE, Serial No 3K3225LH, Model 3K-LH, 3" MODERN #3K-LH AUTOMATIC PIPE-TUBE-BAR CUT-OFF-LATHE, Serial No 3K3225LH, Model 3K-LH, Updated Allen Bradley Panel View 550 PLC, Controls, 20' Modern Automatic Bar-Feed System, 11' Overhead Micrometer Stock-Stop ...more
3-1/8" Modern #3LD, cut off, 1/4"- 3-1/8" OD, 2-slides, push button controls, 1991, #51112
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Modern
Model: 3LD
Year: 1991
SERIAL. 3LD3388, MODEL. 3LD, YEAR. 1991, CAPACITY. 1/4" TO 3-1/8" O.D., MAXIMUM WALL THICKNESS. 1-1/2", MAXIMUM SOLID BAR. 3", SPINDLE SPEEDS. (16) 130 TO 2012, NUMBER OF SLIDEs. 2, LENGTH OF CUT RUN OUT. 8, MAGAZINE STOCK FEED RACK. 20, DRIVE MOTOR. 10 HORSEPOWER, COOLANT MOTOR. 1/2 HORSEPOWER, PUSH BUTTON CONTROLS. ...more
6-5/8" Bardons & Oliver #36, 7-3/8" hole, 3-3/4" slide travel, front & rear, 30 HP, 79-1013 RPM, #63020
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bardons & Oliver
Model: 36
MODEL. #36, MAXIMUM COLLET CAPACITY. 6-5/8" DIAMETER, HOLE IN COLLET & PLUNGER. 7-3/8", MAXIMUM CUTOFF SLIDE TRAVEL. 3-3/4", SPINDLE SPEEDS. (64) 79 TO 1013 RPM, FRONT & REAR SLIDES. YES, SWING DOWN I.D. CHAMFER ATTACHMENT. YES, INFEED & STORAGE RACK. YES, MAIN MOTOR. 30 HP.
12" Fenn #62, Impact Cutting Machine, 10 Ton, 100-150 cuts/min., 7.5 HP, 1160 RPM, 80 psi, 230/480 V., (2 available)
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cut Off Machines
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Fenn
Model: 62
Tensile Strength: @ PSI's see below @ 60000 PSI: Round Stock 5/8 Square Stock 17/32 @ 90000 PSI: Round Stock 1/2 Square Stock 7/16 @ 120000 PSI: Round Stock 7/16 Square Stock 3/8 Maximum Diameter Cutoff 100/150 cuts per Minute Min. Diameter Cutoff 300 cuts per Minute Min. LG - 1 1/2 x Dia. Max. LG 12 Tolerance.005 ...more
19.68" Emmegi #Radial-Libra, Twin-Head Saw, 30° head tilt, 157.48" cutting length, 2015
Revelation Machinery | Chicago, IL
Category: Cut Off Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Emmegi
Model: RADIAL-LIBRA
Year: 2015
Make: Emmegi, Model: RADIAL LIBRA, Year: 2015, Machine Location: South Dakota, Capacity, Thickness: Up to 19.68″, Cutting Capacity, Length: 157.48″, Cutting Head Tilt up to: 30°, Overall Dimensions (L x W x H), approx.: 354.33″ x 236.22″ x 51.18″, Weight, approx.: 3,527 lbs. ...more
75" Ton, McKay #5516-M, 4-Post Cut-Off, 57" F-B & 26" R-L distance between posts
Met-Pro Machinery Inc | Detroit, MI
Category: Cut Off Machines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: 5516-M
MFG: McKay, YEAR: 1968, MODEL: 5516-M, CAPACITY: 75 TON, 4 POST DESIGN, DISTANCE BETWEEN POSTS: 57" FRONT TO BACK, 26" RIGHT TO LEFT, LEMONT MACHINE CO. DIE ACCELERATOR, AIR BLADE RETURN/COUNTERBALANCE, BOW TIE BLADE, HOLDDOWN, AC MOTOR WITH BELT DRIVE TO FLYWHEEL, AIR CLUTCH AND BRAKE.
Toldeo Beaver #Speed-Cut-#20, Cut-Off Saw
Federal Equipment Company | Cleveland, OH
Category: Cut Off Machines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Beaver
Model: SPEED-CUT-#20
Used Toldeo Beaver Tools Cut-Off Saw, model Speed Cut #20, serial 210 201 02278.
Bradbury air bladder cut off, 15 ton, 1" stroke, 4-post, 1-3/4" post diameter, 36" pass line, #71762
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
BRADBURY AIR BLADER CUT OFF, CAPACITY. 15 TON ESTIMATED., STROKE. 1", 4 POST. YES, POST DIAMETER. 1-3/4", PASSLINE HEIGHT. 36", DIE SLIDE TRAVEL. 12", CUT LENGTH LIMIT. 60", BED SIZE LXR X FXB. 24" X 9.5", ADJUSTABLE RUN OUT LIMIT. 90".
Continental #6A, tube, pipe & bar cut-offs, 7.5" cutting diameter, 3 HP, 2003
Machinery Marketing International | Chicago, IL
Category: Cut Off Machines
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Continental
Model: 6A
Year: 2003
Used Continental 6A. This pre-owned Pipe Cutter is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Continental Pipe Cutter we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact ...more
JUST ADDED!
Crown Unlimited Machine #STC0S M-7 Single Tube Cutoff Machine
Fram Fram LLC | Savage, MN
Category: Cut Off Machines
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Crown
Model: STC0S
Crown Unlimited Machine STC0S M-7 Single Tube Cutoff Machine; Double Hitch Feed, 8' Run Out Table, Two Plane Straightener INVENTORY NUMBER: 73.
Emmegi #650SCA/E, single head, rising blade cut off machine, 2016
Premier Equipment Inc | Altamonte Springs, FL
Category: Cut Off Machines
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Emmegi
Model: 650SCA/E
Year: 2016
Emmegi Single Head Cutting Off Machine 650 SCA/E (subject to buyer verification):Machine :Single-head, rising blade cutting-off machine, with N/C automatic rotation of the vertical axis (through D.C.motor) and hydraulic tilting of the horizontal axis. Cutting with angular settings from 90° to 22°30’ (to ...more
Haven #620, cut-off-machine, 2006, #30450
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Cut Off Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Haven
Model: 620
Year: 2006
2" HAVEN KELAN CUT TUBE CUT-OFF, MODEL: 620, SERIAL NUMBER: 6960 Year: 2006, O.D. Capacity: 1/2" - 2", Wall Capacity: Up To 20% Of Tube O.D., Cut Length Capacity: 1/4" - 24", Cut Length Production Rates: 1/4" @ 5400 PPH / 3" @3000 PPH / 6" @ 1530 PPH / 10" @ 1380 PPH, Allen Bradley CNC Control, 25 HP Hydraulic Motor ...more
Landis, pneu.rotary blade cut off, work stop, 5HP hi eff, 3 ea.blades, air filter, oiler
Stanley Machinery Corp | Agawam, MA
Category: Cut Off Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
Laneko cut-off
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Laneko
JUST ADDED!
The Lockformer Company, Insulation Cutter
HGR24 | Euclid, OH
Category: Cut Off Machines
Seller: HGR24
Location: Euclid, OH
Mfr: Lockformer
Inventory No. 0226-054-0021 Manufacturer The Lockformer Company Name Insulation Cutter Arrival Date 02-26-2026 Dimensions L x W x H (inches) 92 x 88 x 83 Weight (lb.) 590 Category Fabrication Condition Used Available Quantity 1 Serial No. IC-213 Item *contains 4 Pieces.
Modern Machine Tool #6MNC, automatic tube, pipe & bar cut-off machine, 2014
Equipment Hub | Decatur, GA
Category: Cut Off Machines
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Modern
Model: 6MNC
Year: 2014
Stock #: 211250009, Brand: Modern Machine Tool, Model: 6MNC, Year: 2014, Loading Fee: Rigging Required, Max Length: 6', Min Length: 28", Material Diameter: 1" to 7", Max Wall Thickness: 1", Fanuc Oi-TD Control, ID/OD Finishing, 24' Bar Feed, Stock #: 211250009Brand: Modern Machine ToolModel: ...more
RDN #GCT, die cutter/guillotine, 115 V., serial# 31115-1, 1993, #3179-8, 1993
Federal Equipment Company | Cleveland, OH
Category: Cut Off Machines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Rdn
Model: GCT
Year: 1993
Used RDN die cutter/guillotine, model GCT, " blade, 115 volts, serial# 31115-1, built 1993.
Hydraulic cut-off machine
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Cut-off
Yoder Machinery Sales | Holland, OH
Category: Cut Off Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
