15 Results
Featured
Aquamaster #CM-1200E, parts washer, 12" W x 66" H tunnel conveyor
U.S. Asset Exchange Llc | Grand Rapids, MI
Category: Conveyor and Pass Through Parts Washer
Seller: U.S. Asset Exchange Llc
Location: Detroit, MI
Mfr: Aquamaster
Model: CM-1200E
Aquamaste CM-1200E, Overall dimensions: 66" W x 64:H, Conveyor Tunnel Capacity: 12"W x 66" H Based on manufacturer data for the CM-1200E and its closely related series (CB-1200E), the include: System Type: Conveyorized Monorail (CM). Motor Power: 5 HP. Conveyor Speed: Approximately 50 feet per minute. Capacity: 300 ...more
Ransohoff #LeanVeyor Belt Washer with Wash, Rinse and Blow-Off. electrically Heated 36' Wx14" H Opening
HTE Inc. | Highland, IN
Category: Conveyor and Pass Through Parts Washer
Seller: HTE Inc.
Location: Detroit, MI
Mfr: Ransohoff
Model: LEANVEYOR
Ransohoff continous stainless steel construction with Ashworth Advantage 200 plastic mesh belt. Wash,rinse and heated blow-off., Wash section double bag stainless filter, rinse section has single stainless bag filter.
Stoelting #Omni-Force-212, 12" x12" S/S conveyor belt washer, electric, wash, rinse, heated blow-off
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Detroit, MI
Mfr: Stoelting
Model: OMNI-FORCE-212
Item 7553 Manufacturer: Stoelting Category: Continuous Type: Stainless Steel Belt Washer Heated: Electric Model Number: Omni Force 212 Serial Number: 832 Max. Temperature: 150°F W/R, 250°F Blow-Off Voltage: 460/3/60 Work Area: 12"W x 12"H Opening External Dimensions: 8'W x 9'H x 17'L Controls: ...more
Automatic Feed Co. #2-LPB-7.5-72, Washer, Pull trough design, 82" Housing depth w/80" Faced Rolls, 1988
Met-Pro Machinery Inc | Detroit, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed Co
Model: 2-LPB-7.5-72
Year: 1988
Continental Equipment belt washer, 36" W x 24" H, 3-stage, gas fired, Stainless Steel
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Continental
Heavy duty three (3) stage stainless steel conveyor belt washer (1" x 1" flat wire belt) with natual gas heated wash, natural gas heated rinse and ambient blow-off. Washer sequence consists of the foillowing: 36" long load end x 48" long entrance vestibule x 96" long wash vestibule x 60" long drain x 36" rinse x 48" ...more
Get email updates for newly added Conveyor and Pass Through Parts Washer
Conveyor and Pass-Through Parts Washers (also known as tunnel washers or inline parts washers) are machines designed for continuous cleaning of parts as they move along a conveyor. Commonly used in industries like automotive, aerospace, and manufacturing, these washers efficiently remove grease, dirt, and contaminants. They are ideal for high-volume production, ensuring consistent and thorough cleaning in automated workflows.
Ransohoff #Leanveyor, Stainless Steel conveyor belt washer, 7" W belt, electric heat, 2019
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Ransohoff
Model: LEANVEYOR
Year: 2019
7" Wide Balanced Weave Conveyor Belt, 1/4" x 1/4" Flights welded approximately every 6" on center., 2-1/8" Tunnel Height, Variable Speed 1-5 FPM, Construction:, Tanks: Stainless, Housing: Stainless, Solution Piping: Stainless, Insulation: 1" Thick, Pre-Blow-Off Fan:, 275 CFM @ 40 SP, Wash Tank:, Capacity: 193 Gallons ...more
Walmil #W0007, continuous parts washer w/infeed & outfeed conveyor
R.A.B. Industries Inc | Washington, MI
Category: Conveyor and Pass Through Parts Washer
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Walmil
Model: W0007
WALMIL COMPANY PARTS WASHER, MODEL W0007. CONTINOUS PARTS WASHER WITH IN FEED AND OUT FEED CONVEYOR.
JUST ADDED!
CAE Ransohoff #Sureclean-24, pass thru parts washer, 24" wide belt conveyor, 4-stage Stainless Steel, 160°F, rust inhibitor, 1997
G-2000 | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: G-2000
Location: Toledo, OH
Mfr: Ransohoff
Model: SURECLEAN-24
Year: 1997
Mfg: Ransohoff (CAE) SERIAL: 3180 Year: 1997 STAINLESS STEEL CONSTRUCTION MODEL: SURECLEAN 24" WIDE BELT WASH, RINSE, RUST INHIBITOR, BLOW OFF Process & Thermal Parameters: Heat Source: Natural Gas (< 1 PSI) Wash Stage Temperature:160°F Rinse Stage Temperature :160°F Approx. R.I. Temperature: 160°F ...more
Ransohoff, Leanveyor 4-stage (wash/rinse/rinse/blow off) washer, 9" x 192" capacity, 480 V., 3-phase, 2013
G-2000 | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: G-2000
Location: Toledo, OH
Mfr: Ransohoff
Year: 2013
SERIAL NUMBER.:5391, VOLTAGE.:480V/3-PHASE/60HZ, FULL LOAD AMPS.:175A, HP.:5, YEAR OF MFG.:2013, Machine Type.Washers Manufacturer.RANSOHOFF Model.LeanVeyor Year.2013 Condition.Used Motor.5 horsepower.
Ransohoff, belt type parts washer, 16", 2002
G-2000 | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: G-2000
Location: Toledo, OH
Mfr: Ransohoff
Year: 2002
SERIAL.: 4135, YEAR OF MANUFACTURER.: 2002, WIDTH OF OPENING.: 18", HEIGHT OF OPENING.: 16", LINE SPEED.:.5 - 5 FPM, POWER REQUIREMENT.: 460 VOLT 60 HERTZ 3 PHASE, STAGE 1:, HEATED WASH.: YES, WASH TANK CAPACITY.: 330 GALLONS, PUMP.: GUSHER 7800 SERIES, 100 GPM @ 30 PSI, STAGE 2, HEATED BLOW OFF.: YES, AMERICAN FAN.: ...more
Fine Machine Kataoka belt type parts washer w/ oil skimmer, 18", 2016
G-2000 | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: G-2000
Location: Toledo, OH
Year: 2016
MODEL.: OS-50TL, SERIAL.: 16-6993, STAGES.: 2, YEAR OF MANUFACTURER.: 2016, WIDTH OF OPENING.: 18", HEIGHT OF OPENING.: 10", CYCLE TIME.: 15Sec/1X PIECE, CONVEYER SPEED.: 1.3m/MIN, POWER.: 200v, -HEATED WASH, -HEATED BLOWOFF, -OIL SKIMMER, ITEM DIMENSIONS:, 144" LONG X 52" WIDE X 85" TALL, Machine Type.Washers ...more
Clean Machine #CM12, Stainless Steel belt washer, elect. heated wash, rinse & blow-off
Bass Machinery LLC | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: Bass Machinery LLC
Location: Toledo, OH
Mfr: Clean Machine
Model: CM12
Year: 2008
12" W x 8" H CLEAN MACHINE 3-Stage Parts Washer, All Stainless Steel Construction, Belt Width: 12", Opening Height: 6-1/2", Modifiable to 10", Floor to Top of Belt: 43", 16" Load Length, 36" Long Wash Section:, (5) Top Spray Bars with 3/2/3/2/2 Nozzles, (3) Bottom Spray Bars with 3 Nozzles Each, (3) 12 kW Indeeco ...more
Midbrook #5024W/R/BO, 24" W x 12" H 3-stage parts washer, elect heated wash/rinse, Regen Blow-Off
Bass Machinery LLC | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: Bass Machinery LLC
Location: Toledo, OH
Mfr: Midbrook
Model: 5024W/R/BO
Year: 2003
MIDBROOK Model 5024W/R/BO Hurricane Parts Cleaning System, AGE: 2003, Stainless Steel Construction, Belt Width: 24", Currently divided into (3) lanes, but can be, easily removed for full 24" of use, Load Height through Washer, Max.: 12", Load / Unload Height, Floor to Top of Conveyor: 36", Conveyor Entry Loading ...more
Continental Equipment Corp., Gas Heat Stainless Steel Conveyor Washer, 4-Stage, 18" width Belt, 15" Opening, 3.5' Load height, 2-8 FPM, 2010
Yoder Brothers Machinery | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Continental
Year: 2010
Dimensions9'8" HIGH X 8'4" WIDE X 52' OVERALL LENGTH, SERIAL. FB865, NEW. 2010, BELT WIDTH. 18", WORK OPENING. 15", BELT SPEED. 2 to 8 FPM, BELT CAPACITY. 60 LBS PER FOOT, LOAD HEIGHT. 3'-6", CHIP BASKETS. 6, CONTROL. 7 DAY TIMER, 4 STAGE WASH, PRE RINSE, RINSE, BLOW OFF, (DATA AT 6 FPM DESIGN SPEED) ...more
Electrovert #Aquastorm-100, In-Line Cleaner Washer, 20" width Conveyor, 2010
Yoder Brothers Machinery | Toledo, OH
Category: Conveyor and Pass Through Parts Washer
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Electrovert
Model: AQUASTORM 100
Year: 2010
Dimensions18' X 7' X 6' HIGH Weight5500 pounds, SERIAL. ASIC-20015, MODEL. AQUASTORM 100, YEAR NEW. 2010, WIDTH OF CONVEYOR. 20", JET WASH SPRAYERS. HURRICANE, DRYING ZONE. TORRID TECHNOLOGY, COMPUTER CONTROLLED. YES, PLUMBING. STAINLESS STEEL, Versatile, Proven Cleaning Performance, The Aquastorm is ...more
