1701 - 1750 of 2152 listings
JUST ADDED!
Okuma #Captain-L370W, CNC lathe, 20.8" swing, 2.44" bore, 14.57" dia., 19.685" lgth, A2-6, OSP-P200L
Worldwide Machine Tool | Lewis Center, OH
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Okuma
Model: CAPTAIN-L370W
Max Swing Over Bed 20.86″ Maximum Swing Over Saddle 16.53″ Maximum Turning Diameter 14.57″ Maximum Turning Length 19.685″ X-Axis Travel 10.23″ Z-Axis Travel 20.47″ Spindle Nose A2-6 Spindle Speed Range 45-4,500 RPM Spindle Bore Diameter 2.44″ Spindle Bearing Inner Diameter ...more
Okuma #Captain-L470, CNC Lathe, 24.4" Swing, 25.5" Machining length, 11" Chuck, 3.5" Bar, 16.5" Turning diameter, 30 HP, 3000 RPM, 12-Tool Turret
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: CAPTAIN-L470
CNC Lathe: Used with 24.4" swing, 25.5" machining length, and 30 hp. s a 3-1/2" bar capacity, 300mm chuck, 12-tool turret, live tooling, and chip conveyor with 3,000 RPM max., OKUMA CAPTAIN L470, Swing. 24.4", Machining Length. 25.5", Power. 30 hp, Max RPM. 3,000 RPM, Turning Dia. 16.5", Control. CNC (OKUMA), 3-1/2" ...more
Okuma #Captain-L470, CNC lathe, 24.4" swing, 15" chuck, 4.33" bore, 50" centers, 16.54" dia., 25.5" lgth, 3000 RPM, 30 HP, 12 turret, OSP E100L, tool setter, tailstock, 2003
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Okuma
Model: CAPTAIN-L470
Year: 2003
, SWING OVER BED.24.41", SWING OVER CROSSLIDE.18.9", TURNING DIAMETER.16.54", DISTANCE BETWEEN CENTERS.50", SPINDLE BORE.4.33", SPINDPE SPEED:.3000 RPM, SPINDLE MOTOR.30 HP,.12 STATION TURRET,.15" CHUCK.
Okuma #Captain-L470/1250BBM, OSP E-100L C, live tooling, 15" chuck, 50" cc, low hours, 2005, $119,500.00
MBI Worldwide LLC | Vernon Rockville, CT
Category: CNC Lathes and Turning Centers
Seller: MBI Worldwide LLC
Location: Vernon Rockville, CT
Mfr: Okuma
Model: CAPTAIN-L470/1250BBM
Year: 2005
Okuma #Captain-L470M, CNC turning lathe, 24.4" swing, 12" chuck, 3-jaw, 3.9" bar, 16.53" dia., 25.59" lgth, 12 turret, A2-11, OSP-P100, C-Axis, live tool, 2006
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: CAPTAIN-L470M
Year: 2006
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP-P100 CNC Control, Floppy Drive, USB ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Okuma #Captain-L470M/1250, CNC turning center, 24.4" swing, 15" chuck, 4" bar, 16.53" dia., 49.21" lgth, OSP-P200L, tailstock, chip conveyor, 2007
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Okuma
Model: CAPTAIN-L470M/1250
Year: 2007
Okuma Captain L470M CNC Turning Center, New in 2007, To the best of our knowledge all listed below are deemed correct., It is the buyers responsibility to confirm all and we encourage an inspection of the machine(s) and accessories prior to purchase., Swing: 24.4, Turning Diameter: 16.5, Spindle Bore: 4.33, Machining ...more
Okuma #Captain-L470M/1250, CNC lathe, 24.4" swing, 15" 3-jaw chuck, 3.5" bar, 16.53"dia., 49.21"lgth, 12 turret, OSP-P200L, 2007
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Okuma
Model: CAPTAIN-L470M/1250
Year: 2007
Live Milling + 50" Max Cutting Length, Swing over Bed: 24.4", Swing over cross slide: 18.89", Max Cutting Diameter: 16.53", Max Cutting Length: 49.21", X-Axis Travel: 11.81", Z-Axis Travel: 50", C-Axis Indexing: Yes, Chuck Size: 15, Bar Capacity: 3.5", Spindle Motor: 30 HP, Spindle Speed: 3,000 RPM, RAPID TRAVERSE ...more
Okuma #Captain-L470M/1250, CNC lathe, 24.4" swing, 15" 3-jaw chuck, 3.5" bar, 16.53"dia., 49.21"lgth, 12 turret, OSP-P200L, 2007
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: CAPTAIN-L470M/1250
Year: 2007
MACHINE, Swing over Bed: 24.4", Swing over cross slide: 18.89", Max Cutting Diameter: 16.53", Max Cutting Length: 49.21", X-Axis Travel: 11.81", Z-Axis Travel: 50", C-Axis Indexing: Yes, Chuck Size: 15, Bar Capacity: 3.5", Spindle Motor: 30 HP, Spindle Speed: 3,000 RPM, Weight: 18,000 LBS ...more
JUST ADDED!
Okuma #Crown-762S-SB, cnc lathe, 21.7" swing, 15.8" swing over cross slide, 10.6" diameter x 19.7" L max turn, 4200 RPM, 18/10 HP, 2.44" bore, 12 turret, tailstock, 1998
Source Machinery Sales | Fridley, MN
Category: CNC Lathes and Turning Centers
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Okuma
Model: CROWN-762S-SB
Year: 1998
*All are approximations and are subject to verification, Okuma Crown 762S SB CNC Lathe, Year 1998, Control OSP700L, Swing over bed 21.65", Swing over cross slide 15.75", Travels Z 20.47", Travels X 7.28", Maximum turning diameter 10.63", Max turning length 19.68", Spindle speeds 75-4200 RPM, Spindle motor 18/10 HP ...more
Okuma #Crown-762SBB, CNC Lathe, 2-Axis, 21.7" Swing, 19.7" Machining length, 10" Chuck, 3.2" Bar, 10.6" Turning diameter, 22 HP, 3500 RPM, 1996
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: CROWN-762SBB
Year: 1996
CNC Lathe, used, s: 21.65" swing, 19.68" machining length, 2-axis, 10" chuck, 3.15" bar capacity, 22 hp, up to 3,500 RPM, tailstock, OSP 700L, 10" 3 jaw, chip conveyor, 480V with built-in transformer., 1996 OKUMA CROWN 762SBB, Swing. 21.65", Machining Length. 19.68", # Axis. 2, Chuck Size. 10", Bar Capacity. 3.15" ...more
Okuma #Crown-L1060, 2-Axis CNC Lathe, 21.6" swing, 10.63" turning diameter, 19.68" machining length, 8" chuck, 2.2" bar, 18 HP, 4200 RPM, tailstock
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: CROWN-L1060
OKUMA CROWN L1060, Swing. 21.65", Machining Length. 19.68", # Axis. 2, Chuck Size. 8", Bar Capacity. 2.2", Power. 18 hp, Max RPM. 4,200 RPM, Turning Dia. 10.63", Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Control. CNC (OKUMA).
Okuma #Crown-L1060, CNC lathe, 21.6" swing, 2" bar, OSP 7000 CNC, 12 position turret, Henning chip conveyor, 2000
Aleco Machinery Sales | Milwaukee, WI
Category: CNC Lathes and Turning Centers
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Okuma
Model: CROWN-L1060
Year: 2000
Pre Owned 2000 Okuma Crown L1060 CNC Lathe, Bar Capacity 2.0", Turn Diameter 10.63", Distance Between Centers 20.00", Z-Axis Travel 20.47", X-Axis Travel 7.28", Swing Over Bed 21.62", Swing Over Cross Slide 15.75", Maximum Turning Diameter 10.63", Spindle Speed 50-4,200 RPM, Spindle Motor 15 HP, Okuma OSP 7000 CNC ...more
Okuma #ES-L6, 2-Axis CNC Lathe, 20" swing, 8.27" turning diameter, 11.02" machining length, 6" chuck, 10 HP, 6000 RPM, 36" draw tube, under 2000 hours, 2004
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: ES-L6
Year: 2004
Used CNC Lathe, 20" swing, 11.02" machining length. s U10L controller, 10 hp, 6,000 RPM, 2 axes. Comes with a 6" chuck, 16C collet nose, and under 2000 cutting hours for efficient operations., 2004 OKUMA ES-L6, Swing. 20", Machining Length. 11.02", # Axis. 2, Chuck Size. 6", Power. 10 hp, Max RPM. 6,000 RPM, Turning ...more
JUST ADDED!
Okuma #GENOS-L300-MYW-E, CNC Turning Center, Y-Axis, C-Axis, Sub Spindle, Live Tooling, 2018
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: GENOS L300-MYW-E
Year: 2018
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Make: Okuma, Model: Genos L300-MYW-e, Year: 2018 ...more
JUST ADDED!
Okuma #GENOS L300MYW-E, CNC Lathe, 10" Chuck, 20 HP, 3,000 RPM, Y-Axis, sub spindle, Live Milling, OSP, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS L300MYW-E
Year: 2018
Used CNC lathe. s include OSP P300LA control, 10" chuck, 20 hp spindle motor, and advanced capabilities like live milling, subspindle, and Y-axis for off-center work., Machine Control OSP P300LA, Chuck Size 10" 3-Jaw Hydraulic, Maximum Swing 20.4", Maximum Turning Diameter 11.81", X-Axis Travel 20.47", Y-Axis Travel ...more
JUST ADDED!
Okuma #Genos-L400, CNC Lathe, 20.4" swing, 19.6" centers, 15.35" turning diameter, 8.66" X, 20.47" Z, 10" chuck, 3000 RPM, 20 HP, 12-turret, OSP-P300L-R control, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS L400
Year: 2014
Used CNC Lathe. s a 20.47" swing, 19.69" machining length, and 10" chuck size. Powered by 20 hp with a max RPM of 3,000. Comes OSP-P300L-R Control and a chip conveyor., Swing: 20.47", Turning diameter: 15.35", Center distance: 19.68", Chuck size: 10", Bar capacity: 3.14", X axis travel: 8.66", Z axis travel: 20.47" ...more
JUST ADDED!
Okuma #Genos-L400E, CNC Lathe, 20.4" swing, 15.35" turning diameter, 43.3" centers, 8.66" X, 45.3" Z, 10" chuck, 3,000 RPM, 20 HP, 12-turret, OSP-P200L-R control, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS L400E
Year: 2012
E CNC Lathe. s OSP-P200L-R Control, 10" 3-jaw chuck, 20 hp motor, and 12 turret capacity. Includes chip conveyor, tool holders, tailstock, and coolant system., OSP-P200L-R Control, Swing: 20.47", Turning diameter: 15.35", Center distance: 43.30", Chuck size: 10", Spindle Bore: 3.14", X axis travel: 8.66", Z axis ...more
JUST ADDED!
Okuma #Genos-L400E, CNC Lathe, 20.4" swing, 43.3" centers, 15.35" turning diameter, 8.66" X, 45" Z, 10" chuck, 3,000 RPM, 20 HP, 12-turret, OSP-P200L-R control, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS L400E
Year: 2012
CNC lathe in used condition s a 10" 3-jaw chuck, OSP-P200L-R control, and 20 hp main motor. Offers 20.47" swing, 43.30" center distance, and 3,000 rpm spindle speed. Includes tool setter, chip conveyor, and coolant system., OSP-P200L-R Control, Swing: 20.47", Turning diameter: 15.35", Center distance: 43.30", Chuck ...more
JUST ADDED!
Okuma #Genos-L400E, CNC Turning Center & Lathe, 8.66" X, 45.03" Z, 20.4" swing, 15.35" turning diameter, 10" chuck, 20 HP, 3000 RPM, OSP-P200L-R control, 2012
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: GENOS L400E
Year: 2012
OKUMA GENOS L400E 2-Axis CNC Lathe, 2012 model, s OSP-P200L-R control, 20.47" swing, 15.35" turning diameter, 43.30" center distance, 10" chuck, 3,000 rpm spindle, 20 hp motor, tool setter, chip conveyor, turret tool holders, and coolant system., OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, OSP-P200L-R Control ...more
Okuma #GENOS-L200E-MY-E, CNC Lathe, 17.7" swing, 7.87" turning diameter, 14.96" machining length, 10 HP, OSP-P300LA-e, 12-turret, Mist-Fit MF-350, 2017
Trader Machinery Inc | Concord, ON
Category: CNC Lathes and Turning Centers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Okuma
Model: GENOS-L200E-MY-E
Year: 2017
17.72"11.81"7.87"14.96"1.7" 10 HP.
JUST ADDED!
Okuma #GENOS-L400E, CNC Turning Center, OSP-P200L-R, 3,000 RPM, 10" Chuck, 12-Pos. Turret, 2012
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Prospect Heights, IL
Mfr: Okuma
Model: GENOS-L400E
Year: 2012
THE 2012 OKUMA GENOS L400E IS A 2-AXIS CNC TURNING CENTER AN OSP-P200L-R CONTROL SYSTEM. THIS MACHINE S A 20.47-INCH SWING OVER BED AND A MAXIMUM TURNING DIAMETER OF 15.35 INCHES, WITH A CENTER DISTANCE OF 43.30 INCHES. THE SPINDLE IS POWERED BY A 20 HP MOTOR, PROVIDING A MAXIMUM SPEED OF 3,000 RPM THROUGH AN A2-8 ...more
JUST ADDED!
Okuma #Genos-L400II-E, CNC Lathe, 2-Axis, 20.4" Swing, 15.35" Turning diameter, 10" Chuck, 3.1" Bar, 20 HP, 3000 RPM, tailstock, 105 cutting hours, 2022
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS L400II-E
Year: 2022
CNC Lathe, used, s a swing of 20.47", 2-axis, 10" chuck, 3.15" bar capacity, 20 hp power, and max 3,000 RPM. Includes OSP-P300LA-e CNC control, chip conveyor, programmable tailstock, and Marposs tool presetter. Only 105 cutting hours., Swing 20.47", Turning Diameter 15.35", Center Distance 20.47", Chuck Size 10", Bar ...more
Okuma #Genos-L200E-MY, multi-axis CNC lathe, OSP-P300L-R Control, 17.7" swing, 1.7" bar, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-200E-MY
Year: 2013
Okuma Genos L200EMY Multi-Axis CNC Lathe, (subject to buyer verification):, Swing Over Bed 17.72”, Swing Over Saddle 11.81”, Max. Turning Diameter 7.87”, Max Work Length 14.96”, Spindle Speed 75 ~ 3000 RPM, Main Motor (30 Min / Cont) 10HP / 7.5HP, Spindle Bore / Bar Capacity ...more
JUST ADDED!
Okuma #Genos-L250e, CNC lathe, OSP-P300L-R Control, 17.7" swing, 2" bar, 8" chuck, 12 station turret, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-250E
Year: 2015
Okuma Genos L-250E CNC Lathe (subject to buyer verification):Swing Over Bed17.72”Swing Over Saddle11.81”Max. Turning Diameter11.02”Max Mach Length19.69”X Axis Travel.79” + 5.51”Z Axis Travel20.47”Rapid Traverse Rated 787 / 984 IPMSpindle Speed75 ~ 3000 RPMSpindle NoseA2 ...more
Okuma #Genos-L300M, CNC lathe, OSP Control, 20.4" swing, parts catcher, milling, chip conveyor, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-300M
Year: 2013
Okuma Genos L300M Multi-Axis CNC Lathe:Swing Over Bed20.47”Swing Over Saddle6.69”Max. Turning Diameter11.81”Mach Length17.7”X Axis Travel9.05”Z Axis Travel20.47”Rapid Traverse Rated 787 / 984 IPMSpindle Speed25 ~ 3000 RPMSpindle NoseA2 – 8Spindle Bore / Bar ...more
Okuma #Genos-L300M, CNC Turning Center, 20.5" swing, 14.6" swing over cross slide, 20" centers, 11.8" diameter x 17.7" L max, 10" chuck, 12 tool, 3.15" bore, 3k RPM, 15 HP, 230 V., OSP P300L cnc, 2011
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: GENOS-L-300M
Year: 2011
11.81" X 17.7" CNC Turning Center with Okuma OSP P300L CNC Control, LNS Move 2 Barfeeder, Live Tooling, Tool Setting Probe, Programmable Tailstock, 10" 3 - Jaw Power Chuck, 12 Position ID/OD Tool Turret, Chip Conveyor and Coolant System, Max Swing Over Slant Bed: 20.47", Max Swing Over Cross Slide: 14.57", Max ...more
Okuma #Genos-L300MW, Multi Axis CNC Lathe, 3000 RPM, OSP-P300L-R Control, 2013
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Okuma
Model: GENOS-L-300MW
Year: 2013
Make: Okuma, Model: Genos L300-MW, Year: 2013, Machine Location: Illinois, X-AXIS Movement: 9.3″, Z-AXIS Movement: 18.1″, C-AXIS Movement: 14.1″, Workpiece drm: 11.8″, Number of axis: 4, Number of spindles: 2, Spindle speed range: 3000 1/MIN, Approx. Dimensions: 119.3″ x 88.1″ x ...more
Okuma #Genos-L300MY, CNC lathe, 20.4" swing, 10" chuck, 2.7" bar, OSP-P200LA-R Control, 2013
Clark Machinery Sales LLC | Hunt Valley, MD
Category: CNC Lathes and Turning Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Okuma
Model: GENOS-L-300MY
Year: 2013
2013 OKUMA GENOS L300MY, SWING OVER BED. 20.47", MAX CUTTING DIAMETER. 11.81", X-AXIS TRAVEL. 9", Y-AXIS. Yes, Z-AXIS TRAVEL. 17.7", CHUCK SIZE. 10", BAR CAPACITY. 2.75", SPINDLE NOSE. A2-8, SPINDLE MOTOR. 30 hp, SPINDLE SPEED. 3,000 RPM, TURRET CAPACITY. 12, LIVE MILLING. Yes, LIVE MILLING SPEED. 4,500 RPM ...more
Okuma #Genos-L300MYW, 5-Axis CNC Lathe, 20.4" swing, 15.43" turning diameter, 5.91" machining length, 10" chuck, 3" bar, 15 HP, 3800 RPM, 1000 psi coolant pump, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L-300MYW
Year: 2020
5-axis CNC lathe used with OSP-P300LA-e control, 15 hp, 3,800 RPM max, and 10" chuck. s Y-axis, tool stations, 1000 PSI coolant pump, modified parts catcher, and Edge Technologies Rebel V-80 bar feeder., 2020 OKUMA GENOS L300-MYW, # Axis. 5, Swing. 20.47", Machining Length. 5.91", Chuck Size. 10", Bar Capacity. 3" ...more
Okuma #Genos-L300MYW, multi-axis CNC turning center, OSP-P300L-R Control, 20.4" swing, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-300MYW
Year: 2014
2014 Okuma Genos L300-MYW Multi-Axis CNC Turning CenterThis 2014 Okuma Genos L300-MYW is the best machine for multitasking machining. It can turn, mill, and work on the Y-axis at the same time, and it has a sub-spindle for complete part processing in one setup. This machine is great for small to medium-sized ...more
Okuma #Genos-L300MYW, 5-Axis CNC Lathe, 9.25" X, 3.94" Y, 20.47" Z, 11.81" turning diameter, 10" 3-jaw chuck, 2.7" bar, 20 HP, 3000 RPM, 12 position turret, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L-300MYW
Year: 2014
5-axis CNC lathe, used. s include 20.47" swing, 5.91" machining length, 10" chuck size, 3" bar capacity, 15 HP, 3800 RPM max, and 11.81" turning diameter., Maximum Turning Diameter 11.81", X-Axis Travel 9.25", Y-Axis Travel 3.94", Z-Axis Travel 20.47", Spindle Nose / Bore / Bar Capacity A2-8 / 3.15" / 2.75", Spindle ...more
Okuma #Genos-L300MYW, 5-Axis CNC Lathe, 20.47" X, 3.94" Y, 18.11" Z, 11.81" turning diameter, 5.91" machining length, 10" chuck, 3" bar, 20 HP, 3000 RPM, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L-300MYW
Year: 2018
MAXIMUM TURNING DIAMETER: 11.81", X AXIS TRAVEL: 20.47", Y AXIS TRAVEL: 3.94", Z AXIS TRAVEL: 18.11", W AXIS TRAVEL: 20.47", SPINDLE SPEEDS: 3000 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE: A2-8, SUB SPINDLE SPEED: 6000 RPM, SUB SPINDLE MOTOR: 10 HP, LIVE MILLING SPEED: 6000 RPM, LIVE MILLING MOTOR: 7.5 HP, WEIGHT ...more
Okuma #Genos-L300MYW-e, CNC lathe with sub spindle, 2018
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Okuma
Model: GENOS-L-300MYW-E
Year: 2018
Okuma #Genos-L300MYW-e-X-500, CNC Turning Center, 10" Chuck, 2.7" Bar, 11.81" Turn diameter, 20.47" X, 3.94" Y, 18.11" Z, 20 HP, 3000 RPM, 2018
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: GENOS-L-300MYW-E-X-500
Year: 2018
Used 2018 Okuma Genos L300-MYW-e X 500. Machine Tool Bids offers plenty of CNC Turning Centers and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Okuma Genos L300-MYW-e X 500 or any of our machines., MACHINE, Maximum Turning Diameter: 11.81", Maximum Bar ...more
Okuma #Genos-L300MYW-eX500, CNC lathe, 10" chuck, 2.7" bar, A2-8, 12 turret, 20 HP, 8000 RPM, OSP P300LA, sub spindle, parts catcher, 2018
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Okuma
Model: GENOS-L-300MYW-EX500
Year: 2018
2018 Okuma Genos L300-MYW-e X 500 CNC Lathe, Okuma Genos L300-MYW-e X 500 CNC Lathe, New: 2018, MAXIMUM TURNING DIAMETER: 11.81", MAXIMUM BAR CAPACITY: 2.75", X AXIS TRAVEL: 20.47", Y AXIS TRAVEL: 3.94", Z AXIS TRAVEL: 18.11", W AXIS TRAVEL: 20.47", SPINDLE SPEEDS: 3000 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE: A2-8 ...more
Okuma #Genos-L400, CNC lathe, 20.4" swing, 10" chuck, 3-jaw, 2.6" bar, 15.3" dia., 19.6" lgth, 22" centers, OSP P300L-R, 12 turret, A2-8, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-400
Year: 2014
OKUMA GENOS L400 CNC UNIVERSAL TURNING CENTER:CONTROL CNC (OSP P300L-R)WEIGHT 13000.00Swing Over Bed: 20.47″Turning Diameter, Shaft Diameter: 15.3″Machining Length: 19.6″Distance Between Centers: 22″Distance Between Spindles: 0Chuck Size 1, 2: 10″Spindle Nose 1, 2: A 2 – 8Spindle ...more
Okuma #Genos-L400, 20.4" swing, 10" chuck, 2.6" bar, 15.3" diameter, 19.6" length, OSP-P300L-R, chip conveyor, 2014
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Okuma
Model: GENOS-L-400
Year: 2014
OKUMA GENOS L400 CNC Universal Turning Center, 2014, s 20.47" swing over bed, max turning diameter 15.3", machining length 19.6", 10" hydraulic chuck, and 15 HP spindle with 3000 RPM, CNC control and chip conveyor., Swing Over Bed: 20.47", Turning Diameter, Shaft Diameter: 15.3", Machining Length: 19.6", Distance ...more
JUST ADDED!
Okuma #Genos-L400, CNC 2-Axis turning lathe, OSP-P200LA-R Control, 20.4" swing, 19.6" centers, 10" chucki, 3.1" bar, 2013
Industrial Machinery NJ, LLC | Livonia, MI
Category: CNC Lathes and Turning Centers
Seller: Industrial Machinery NJ, LLC
Location: Livonia, MI
Mfr: Okuma
Model: GENOS-L-400
Year: 2013
2013 OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, S/N 0970, OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, OSP-P200LA-R Control, Swing: 20.47", Turning diameter: 15.35", Center distance: 19.68", Chuck size: 10", Bar capacity: 3.14", X axis travel: 8.66", Z axis travel: 20.47", Rapid traverse (x/z): 787/985 ...more
Okuma #Genos-L400, 2-Axis CNC turning center lathe, OSP-P300L-R, 20.4" swing, 19.6" centers, 10" chuck, 3.1" bar, 2014
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: GENOS-L-400
Year: 2014
OKUMA GENOS L400 2-AXIS CNC TURNING CENTER LATHE, 4200 HOURS, COLLET CHUCK, 12 POS TURRET, TOOL SETTER, CHIP CONVEYOR OSP 300L-R CNC, OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, Swing: 20.47", Turning diameter: 15.35", Center distance: 19.68", Chuck size: 10", Bar capacity: 3.14", X axis travel: 8.66", Z axis ...more
Okuma #Genos-L400, 2-Axis CNC turning center lathe, OSP-P200L-R Control, 20.4" swing, 19.6" centers, 10" chuck, 3.1" bar, 2012
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: GENOS-L-400
Year: 2012
OKUMA GENOS L400E 2-AXIS CNC TURNING CENTER LATHE, 10" 3-jaw CHUCK, 12 POS TURRET, TOOL SETTER, CHIP CONVEYOR OSP 200L-R CNC, OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, OSP-P200L-R Control, Swing: 20.47", Turning diameter: 15.35", Center distance: 43.30", Chuck size: 10", Spindle Bore: 3.14", X axis travel: ...more
Okuma #Genos-L400, CNC Lathe, 20.4" swing, 10" chuck, 3.1" bar, 3000 RPM, 20 HP, OSP-P200L-R, 2013
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: GENOS-L-400
Year: 2013
15.35” X 19.68” CNC Lathe with OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals., Swing: 20.47”, Turning Diameter: 15.35”, Center Diameter: 19.68”, Chuck Size: 10”, Bar Capacity: 3.14”, X - Axis Travel: 8.66”, Z - Axis Travel: ...more
Okuma #Genos-L400, CNC Lathe, 8.6" X, 20.4" Z, 20.4" swing, 15.3" turning diameter, 19.6" machining length, 22" between centers, 10" chuck, 3.14" bore, A2-8, 15 HP, 3000 RPM, tailstock, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L-400
Year: 2014
Used CNC Lathe offers a swing of 20.47", machining length of 19.69", and a 10" chuck. With a 20 hp motor reaching up to 3,000 RPM, it s a turning diameter of 12.2" and includes tailstock., Swing Over Bed: 20.47", Turning Diameter, Shaft Diameter: 15.3", Machining Length: 19.6", Distance Between Centers: 22", Distance ...more
Okuma #Genos-L400E, CNC lathe, OSP-P200L Control, 20.4" swing, 42" centers, 2.7" bar, 10" chuck, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-400E
Year: 2011
Okuma Genos L400E CNC Lathe (subject to buyer verification):Swing Over Bed20.47”Swing Over Saddle11.81”Max. Turning Diameter15.35”Between Centers: 42”Spindle Speed25 ~ 3000 RPMSpindle Bore / Bar Capacity3.15″/ 2.76”Number of Tools12 Position Turret (subject to buyer ...more
Okuma #Genos-L400II-E, 2-Axis CNC Lathe, 20.4" swing, 16.69" machining length, 12.99" turning diameter, 8" chuck, 2.7" bar, 15 HP, 3000 RPM, OSP-P300LA, tailstock, 2023
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L-400II-E
Year: 2023
Used 2023 OKUMA Genos L400II-E CNC lathe. Featuring a 20.47" swing, 16.69" machining length, and 15 hp power, it's a programmable tailstock, chip conveyor, OSP-P300LA control, and more., 2023 OKUMA Genos L400II-E, Swing. 20.47", Machining Length. 16.69", # Axis. 2, Chuck Size. 8", Bar Capacity. 2.75", Power. 15 ...more
Okuma #Genos-L2000-e, CNC lathe, 17.7" swing, 8" chuck, 3-jaw, 2" bar, 40" centers, 9.06" dia., 19.69" lgth, 12 turret, A2-6, OSP-P300LA, tailstock, 2020
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Okuma
Model: GENOS-L2000-E
Year: 2020
, X-TRAVEL: 6.50", Z-TRAVEL: 18.50", DISTANCE BETWEEN CENTERS: 20", MAX SWING OVER BED: 17.72", MAX TURNING / CUTTING LENGTH: 19.69", MAX CUTTING / TURNING DIAMETER: 9.06", SPINDLE-, BAR CAPACITY: 2.00", SPINDLE BORE: 2.44", SPINDLE SPEED: 5,000 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE: A2-6, TURRET: 12 POSITION.
JUST ADDED!
Okuma #Genos-L250E, CNC lathe, 17.7" swing, 8" chuck, chuck, 2.6" bore, 11.02" dia., 19.69" lgth, A2-6, 12 turret, 75-3000 RPM, 20 HP, OSP-P300L-R, tailstock, 2014
Worldwide Machine Tool | Lewis Center, OH
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Okuma
Model: GENOS-L250E
Year: 2014
Max Swing Over Bed 17.72″ Maximum Swing Over Saddle 11.81″ Maximum Turning Diameter 11.02″ Maximum Turning Length 19.69″ X-Axis Travel 79″ + 5.51″ Z-Axis Travel 20.47″ Spindle Nose A2-6 Spindle Speed Range 75-3000 RPM Spindle Bore Diameter 2.6″ Spindle Motor 20 HP Power ...more
Okuma #Genos-L3000-E, CNC Lathe, 3-Axis, 20.4" Swing, 19.69" Machining length, 10" Chuck, 13.39" Turning diameter, 30 HP, 3800 RPM, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L3000-E
Year: 2018
CNC Lathe, used, OSP-P300LA-e control, 3-axis, 10" chuck, 30 hp, max 3,800 RPM. Swing: 20.47", machining length: 19.69", turning dia: 13.39". Includes chip conveyor and live milling., 2018 OKUMA GENOS L3000-E, Swing. 20.47", Machining Length. 19.69", # Axis. 3, Chuck Size. 10", Power. 30 hp, Max RPM. 3,800 RPM ...more
Okuma #Genos-L3000-E, CNC Lathe, 13.39" max. turning diameter, 19.69" max. turning length, 30 HP, 3800 RPM, A2-8, OSP-P300LA-e, 2019
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L3000-E
Year: 2019
2019 OKUMA GENOS L3000-E CNC Lathe in used condition. Max Turning Dia: 13.39", Length: 19.69". s 30 Hp power, 38~3,800 speed range, and rapid traverse in X/Z. Includes chip conveyor and OSP-P300LA-e control system., Max Turning Diameter: 13.39, Max Turning Length: 19.69, Spindle Nose Type: Jis A2-8, Speed Range: ...more
Okuma #Genos-L3000M-E, CNC Lathe, 20.4" Swing, 10" Chuck, 2.8" Bar, 20 HP, 4500 RPM, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L3000M-E
Year: 2017
CNC Lathe, used, s 20.47" swing, 10" chuck, 2.8" bar capacity. Powered by 20 hp, reaches up to 4,500 RPM. chucks and collet chucks., 2017 OKUMA GENOS L3000M-E, Swing. 20.47", Chuck Size. 10", Bar Capacity. 2.8", Power. 20 hp, Max RPM. 4,500 RPM, Come with chucks and collet chucks..
Okuma #Genos-L3000M-E, CNC Lathe, 20.4" swing, 41.73" max. turning length, 10" chuck, 2.8" bar, A2-6, 20 HP, 4500 RPM, OSP200L control, 2012, 9222 hours
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L3000M-E
Year: 2012
CNC Lathe, used condition. Key s include a 10" chuck, 20.47" swing, 2.8" bar capacity, 20 HP, and speeds up to 4,500 RPM. s OSP200L Control. Cutting hours: 9,222., 10" chuck, 2.8" bar capacity, 20.47" swing, 11.81" max over saddle, 41.73" max turn length, A2-6 spindle, Spindle 19.5, 20 HP, 3,000 RPM Mill spindle, 9.1 ...more
