101 - 150 of 252 listings
JUST ADDED!
Haas #ST-30Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 18" dia., 23" lgth, 5-Axis, sub spindle, live tool, 2023
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-30Y
Year: 2023
The Haas ST-30Y is a high-performance Y-axis CNC turning center designed for medium-sized parts, offering enhanced capabilities for milling, drilling, and tapping. It s a 30 hp vector drive spindle, 10" chuck (3.0" bar capacity), and a 12-station BMT65 turret, offering exceptional value for versatile "done-in-one" ...more
Haas #ST-40, CNC lathe, 34.5" swing, 15" chuck, 4" bar, live tooling, 40 HP, 2400 RPM, 2013
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-40
Year: 2013
2013 HAAS ST-40, Swing. 34.5", Machining Length. 1,118 mm, Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 2,400 RPM, Tailstock. No, Live Tooling. Yes.
Haas #ST-40, CNC turning center, 35.5" swing, 15" chuck, 3-jaw, 4" bar, 30" dia., 44" lgth, C-Axis, live tool, rigid tap, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-40
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 3,282 Hours Run Time ...more
JUST ADDED!
Haas #ST-40, CNC turning center, 35.5" swing, 18" chuck, 3-jaw, 7" bar, 30" dia., 44" lgth, 7.5" big bore, A2-8, 12 turret, rigid tap, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-40
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Replacement Cost Over $199,000 with Similar Options ...more
Haas #ST-45, CNC lathe, 34.5" swing, 44" machining length, 25.5" turn diameter, 40 HP, 1400 RPM, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-45
Year: 2014
2014 HAAS ST-45, Swing. 34.5", Machining Length. 44", Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 1,400 RPM, Tailstock. No, Live Tooling. Yes, HAAS CNC Control, Chip Conveyor.
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Haas #ST-45, CNC lathe, 34.5" swing, 44" machining length, 25.5" turning diameter, chip conveyor, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-45
Year: 2014
2014 HAAS ST-45, Swing. 34.5", Machining Length. 44", Max. Turning Diameter. 25.5", Chuck Size. 18", Bar Capacity. 6", Power. 40 hp, Max RPM. 1,400 RPM, Tailstock. No, Live Tooling. No, HAAS CNC Control, Chip Conveyor.
JUST ADDED!
Haas #ST30, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 32.5" centers, 15" dia., 32.5" lgth, A2-6, 12 turret, 30 HP, 3400 RPM, 2020
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST30
Year: 2020
HAAS ST-30 CNC Lathe, 2020 model, in used condition. s include 31.75" swing, 26" machining length, 10" chuck size, 3" bar capacity, 30 HP power, 3400 RPM max, and 21" turning diameter. Ideal for precise and efficient turning operations., Chuck: 10, Max. Part Swing: 21, Max. Cutting Diameter: 15, Max. Cutting Length: ...more
Haas #TL-1, CNC lathe, 2010
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: TL-1
Year: 2010
Manufacturer Haas, Model TL-1, Year 2010, Condition Used.
Haas #TL-1, CNC lathe, 2010
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: TL-1
Year: 2010
Manufacturer HaasModel TL-1Year 2010Condition Used.
Haas #TL-2, CNC Lathe, 2" bar, 2000 RPM, 10 HP, 16" diameter x 48" L max, 8 tool, tailstock, 2015
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Haas
Model: TL-2
Year: 2015
2015 Haas TL-2 CNC Lathe w/ Tailstock #8101 #2, Bar Capacity: 2", Chuck Size: 8", Spindle Speed: 2,000 RPM, Spindle Motor: 10 HP, X Axis Travel: 8", Z Axis Travel: 48", Rapid Rate Z Axis: 450 IPM, Turret Tools: 1 Station, Rapid Rate X Axis: 450 IPM, Max Turning Dia: 16", Max Turning Length: 48", Max Swing: 16" ...more
Haas #TL-2, CNC lathe, 2010
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: TL-2
Year: 2010
Manufacturer Haas, Model TL-2, Year 2010, Condition Used.
Haas #TL-2, CNC lathe, 2010
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: TL-2
Year: 2010
Manufacturer HaasModel TL-2Year 2010Condition Used.
JUST ADDED!
Haas #TL-25 CNC turning center, 14.5" swing, 10" chuck, 3" bar, 40" centers, 12 turret, 3400 RPM, sub spindle, automatic tool presetter, 2004
Blackstone Machinery | Cerritos, CA
Category: CNC Lathes and Turning Centers
Seller: Blackstone Machinery
Location: Cerritos, CA
Mfr: Haas
Model: TL-25
Year: 2004
JUST ADDED!
Haas #TL-25, CNC Lathe, 11.3" X, 34" Z, 30" swing, 16" max. turning diameter, 39" between centers, 10" chuck, 30 HP, 3400 RPM, Servo Bar 300 bar feeder, 208/230 Volt, 2005
Heavy Wall Consulting | Long Beach, CA
Category: CNC Lathes and Turning Centers
Seller: Heavy Wall Consulting
Location: Ojai, CA
Mfr: Haas
Model: TL-25
Year: 2005
KEY AT A GLANCE: SPINDLE & POWER: • Main Spindle: 30 HP Vector Drive • Spindle Speed: 0-3,400 RPM (variable) • Spindle Bore: 70mm (2.76") • Sub-Spindle: Up to 4,000 RPM • Electrical: 208/230V, 3-Phase, 50/60 Hz, 80 Amps max TURNING CAPACITY: • Swing Over Bed: 30" • Swing Over ...more
Haas #TM-1, tool room mill, 2001
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Orange, CA
Mfr: Haas
Model: TM-1
Year: 2001
The 2001 Haas TM-1 Tool Room Mill is a reliable and efficient milling machine designed for precision machining tasks. With a 4th Axis board installed and a tool changer, this machine offers convenience and versatility for various milling operations. The Haas brand is known for quality and durability, making this tool ...more
Haas, automatic parts loader, 5.8" part diameter, 5" part length, 2020
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Year: 2020
*All are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*, s:, Interfaces Directly with the Haas control, Easy-to-use interface in the Haas control, Accommodates parts up to 5.8" diameter x 5" ...more
Hardinge #CHNC-III, CNC lathe, Fanuc 18iT, 14" swing, 1.6" bar, 10 HP, 5000 RPM
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Hardinge
Model: CHNC-III
HARDINGE CHNC-III, Swing. 14", Max. Turning Diameter. 8", Bar Capacity. 1.625", Power. 10 hp, Max RPM. 5,000 RPM, GE Fanuc Series 18i-T CNC Control.
JUST ADDED!
Hardinge #Conquest-GT27SP, gang tool CNC lathe, 11.7" swing, 4" chuck, 1" bar, 5 HP, 6000 RPM, LNS Ecoload barfeed, 2006
PM Machines | Santa Ana, CA
Category: CNC Lathes and Turning Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Hardinge
Model: CONQUEST-GT27SP
Year: 2006
2006 HARDINGE CONQUEST GT27SP, Swing. 11.76", Chuck Size. 4", Bar Capacity. 1.062", Power. 5 hp, Max RPM. 6,000 RPM, Weight. 8,000 lbs., Collect Nose.
Hardinge #Talent-8/52-SV, CNC turning center, 18" swing, 8" 3-jaw chuck, 2" bar, 11" dia., 15" lgth, A2-6, 12 turret, Fanuc Oi-TC, rigid tap, 2006
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hardinge
Model: TALENT-8/52-SV
Year: 2006
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc Oi-TC CNC Control, Linear Ways ...more
Hwacheon #Cutex-160A, horizontal turning center, 21.6" swing, 6" chuck, 3-jaw, 1.7" bar, 12 turret, A2-5, Fanuc 0i-TC, 2010
ACT Machinery | Fullerton, CA
Category: CNC Lathes and Turning Centers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Hwacheon
Model: CUTEX-160A
Year: 2010
, CNC Control, yes, Type of CNC Control, Fanuc 0i-TD Control, Swing Over Bed, 21.65 inches, Max. Cutting Diameter, 11.81 inches, Standard Cutting Diameter, 6.69 inches, Max. Cutting Length, 11.81 inches, Chuck Size, 6 inches, Type of Nose Spindle, A2-5, Max Spindle Speed (RPM), 6000, Through Spindle Hole Diameter ...more
Hwacheon #Cutex-180BL-YSMC, 8" chuck, 2.5" bar, 27.5" swing, 13.77" diameter x 17.79" L max, 4500 RPM, 22" centers, Fanuc I Control, 12 tool, automatic tool preset, parts catcher, chip conveyor, 2019
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hwacheon
Model: CUTEX-180BL-YSMC
Year: 2019
, Chuck Size: 8", Bar Capacity:2.55", Swing: 27.55", Turning Diameter:13.77", Spindle Speed: 4,500 RPM, Control: Fanuc i, Distance Between Centers: 22", Max Cutting Length: 17.79", Turret: 12 Station, Live Tooling: C-Axis Live Tooling, Y-Axis, Sub-Spindle:6,000 RPM, Chip Conveyor, Equipt with:, Barfeed in Picture Not ...more
Hwacheon #Hi-Tech-200B/MC, CNC turning center, Fanuc 0iTF, 19.6" swing, 10" chuck, 2.5" bar, 2019
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Hwacheon
Model: HI-TECH-200B/MC
Year: 2019
2019 HWACHEON HI-TECH 200B/MC, Swing. 19.69", Machining Length. 11.89", Max. Turning Diameter. 13.78", X-Axis. 7.68", Z-Axis. 16.93", Chuck Size. 10", Bar Capacity. 2.52", Spindle Bore. 2.95 in, Spindle Nose. A2-6, Power. 20.1 hp, Max RPM. 3,500 RPM, Turret Stations. 12, Fanuc 0i-TF CNC Control, Milling, Chip Conveyor.
Hwacheon #Hi-Tech-700, CNC turning center, 35.4" swing, 24" chuck, 3-jaw, 4.9" bar, 80" centers, 27.56" dia., 78.74" lgth, A2-11, 12 turret, Fanuc 18i-TB, 2006
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hwacheon
Model: HI-TECH-700
Year: 2006
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, 8091 Hours Cutting ...more
Hyundia Hyundai Kia #SKT21LMS, CNC turning center, 21.7" swing, 8" chuck, 3-jaw, 2.5" bar, 10" dia., 20.9" lgth, Fanuc 0i-TC, C-Axis, live tool, sub spindle, 2007
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Kia
Model: SKT-21LMS
Year: 2007
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 0i-TC CNC Control, 7,996 Hours Cutting ...more
Hyundai Wia #E160A, CNC lathe, 11" diameter, 11.8" length, 10/15 HP, 6k RPM, 6" chuck, Fanuc I Control, tailstock, LNS bar feed, chip conveyor, 2015
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hyundai Wia
Model: E160A
Year: 2015
2015 Hyundai Wia E160A CNC Lathe #7823 #2, Max Turning Diameter: 11, Max Turning Length: 11.8, Chuck Size: 6, Spindle RPM: 6,000 RPM, Spindle Output: 10/15 HP, X Travel: 6.5, Z Travel: 13, Rapid Traverse: 1,181 IPM, Turret: 12 positions, Hyundia Wia Fanuc i Series Control, LNS Eco Load S2 Bar Feeder, Tailstock, Chip ...more
Hyundai Wia #E160A, CNC lathe, 11" diameter, 11.8" length, 10/15 HP, 6k RPM, 6" chuck, Fanuc I Control, tailstock, LNS bar feed, chip conveyor, 2015
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hyundai Wia
Model: E160A
Year: 2015
2015 Hyundai Wia E160A CNC Lathe #7824 #2, Max Turning Diameter: 11, Max Turning Length: 11.8, Chuck Size: 6, Spindle RPM: 6,000 RPM, Spindle Output: 10/15 HP, X Travel: 6.5, Z Travel: 13, Rapid Traverse: 1,181 IPM, Turret: 12 positions, Hyundia Wia Fanuc i Series Control, LNS Eco Load S2 Bar Feeder, Tailstock, Chip ...more
Hyundai Wia #L210A, CNC turning center, 21.7" swing, 8" chuck, 2.6" bar, 13.8" dia., 16.1" lgth, 12 turret, A2-6, 4000 RPM, 20 HP, Fanuc I, LNS Super Hydrobar bar feeder, tailstock, tool presetter, 2014
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Wia
Model: L-210A
Year: 2014
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Hyundai WIA Fanuc i Series CNC Control, Linear ...more
Hyundai Wia #L230LMSA, CNC turning center, 23.6" swing, 8" 3-jaw Samchully MH-208 chuck, 2.6" bar, 12.2" dia., 20.5" length, A2-6, 12 turret, Fanuc I, sub spindle, live tool, tool presetter, rigid tap, 2012
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Wia
Model: L-230LMSA
Year: 2012
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc i Series CNC Control, 4,736 Hours Cutting ...more
Hyundai Wia #LM-1600TTSY, multi-axis CNC lathe, 2014
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Hyundai Wia
Model: LM-1600TTSY
Year: 2014
2014 Hyundai WIA LM-1600TTSY Multi Axis CNC Lathe.
Hyundai Wia #SE-220L, CNC turning center, 2022
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Hyundai Wia
Model: SE-220L
Year: 2022
Condition UsedStock Number 47518888101.
Johnford #SL-500, CNC turning center, Fanuc 0iTD, 22.8" swing, 10" chuck, 3" bar, 2012
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Johnford
Model: SL-500
Year: 2012
Manufacturer: JOHNFORD, Model: SL-500, Year: 2012, Stock #: 41345, Status: For Sale, Machining Length 31", Swing 22.8", Turning Dia 17.7", Chuck Size 10", Bar Capacity 3", Power 25 hp, Max RPM 3,500 RPM, Tailstock Yes, Control CNC (FANUC 0i-TD), Weight 13668.66.
Leadwell #LTC-30BPL, 25.6" swing, 12" chuck, 3-jaw, 3" bar, 40" centers, 18.9" dia., 54" lgth, A2-8, 12 turret, Fanuc OT, tailstock, tool presetter, chip conveyor, 1999
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Leadwell
Model: LTC-30BPL
Year: 1999
1999 Leadwell LTC-30BPL Long Bed CNC Lathe - w/ Tailstock, Chip Conveyor, Leadwell LTC-30BPL Long Bed CNC Lathe, New: 1999, Swing Over Bed: 25.6", Distance Between Centers: 40.0", Max. Machining Diameter: 18.9", Max. Machining Length: 54", Chuck: Hydraulic 3-Jaw 12, X-axis Travel: 10.4", Z-axis Travel: 60", Spindle ...more
Leadwell #LTC-30BPL, 25.6" swing, 12" chuck, 3-jaw, 3" bar, 40" centers, 18.9" dia., 54" lgth, A2-8, 12 turret, Fanuc OT, tailstock, 2001
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Leadwell
Model: LTC-30BPL
Year: 2001
2001 Leadwell LTC-30BPL CNC Lathe - w/ Tailstock, Leadwell LTC-30BPL Long Bed CNC Lathe, New: 2001, Swing Over Bed: 25.6", Distance Between Centers: 40.0", Max. Machining Diameter: 18.9", Max. Machining Length: 54", Chuck: Hydraulic 3-Jaw 12, X-axis Travel: 10.4", Z-axis Travel: 60", Spindle Speed: 2500 Rpm, Bar ...more
Lico #LNC-42, horizontal turning center, great deal
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Orange, CA
Mfr: Lico
Model: LNC-42
PRESENTS FOR SALE #: 00151/TNT/. TNT INDUSTRIAL..
Mazak #Integrex-70YB, CNC turning center, 5-axis, 36" swing x 80" length, 5000 RPM, 3 phase, 30 chuck, electric, 2001
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Orange, CA
Mfr: Mazak
Model: INTEGREX-70YB
Year: 2001
Mazak Integrex 70YB 5-Axis CNC Turning Center, 36" Swing x 80" Between Centers. See List Below for Mazak Enabled Options and. Note Machine is Air-Chuck Ready. See Video. Max..
Mazak #Integrex-100-IV, CNC lathe, 21.4" swing, 6" chuck, 2" bar, 21.46" dia., 29.65" lgth, Mazatrol Matrix, tailstock, chip conveyor, 2011
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: INTEGREX-100-IV
Year: 2011
2011 Mazak Integrex 100-IV CNC Turning Center w/ Full Live Milling/Drilling, Mazak Integrex 100-IV CNC Turning Center, New: 2011, Chuck Size: 6", Max Swing: 21.46", Swing Over Cross: 13.86", Cutting Diameter: 21.46", Max Machining Length: 29.65", X-Axis Travels: 16.14", Y-Axis Travels: +/- 2.75", Z-Axis Travels: ...more
Mazak #Integrex-100-IV, CNC lathe, 21.4" swing, 6" chuck, 2" bar, Mazatrol Matrix, tailstock, chip conveyor, 2007
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: INTEGREX-100-IV
Year: 2007
2007 Mazak Integrex 100-IV CNC Turning Center w/ Full Live Milling/Drilling, Mazak Integrex 100-IV CNC Turning Center, New: 2007, Chuck Size: 6", Max Swing: 21.46", Swing Over Cross: 13.86", Cutting Diameter: 21.46", Max Machining Length: 29.65", X-Axis Travels: 16.14", Y-Axis Travels: +/- 2.75", Z-Axis Travels: ...more
Mazak #Integrex-200-IV ST, CNC lathe, 26" swing, 8" chuck, 2.5" bar, 26" dia., 40" lgth, 40 ATC, Mazatrol Matrix, rigid tap, 2006
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Mazak
Model: INTEGREX-200-IV
Year: 2006
*All are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*, s:, Mazatrol Matrix CNC Control, Linear Ways Construction, EIA/ISO Programming, 3DCoordinate Conversion, Rigid Tapping, PCMCIA Card Slot ...more
Mazak #Integrex-200SY, CNC lathe, Mazatrol 640MT Control, 21.2" swing, 10" chuck, 2" bar, 2000
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Mazak
Model: INTEGREX-200SY
Year: 2000
2000 MAZAK INTEGREX 200SY, Swing. 21.25", Max. Turning Length. 40", Max. Turning Diameter. 21.25", X-Axis. 20.87", Y-Axis. 5.5", Z-Axis. 42", Rapid Traverse X-Axis. 1181 ipm, Rapid Traverse Y-Axis. 590 ipm, Rapid Traverse Z-Axis. 1299 ipm, ATC. 40, Spindle Taper. A2-6, Chuck Size. 10", Bar Capacity. 2", Spindle Bore. ...more
Mazak #Integrex-300II-SY, multi-axis CNC lathe, 30" swing, 3.4" bar, 60" centers, 35-3500 RPM, 40 HP, 40 ATC, 10k RPM, Fusion 640MT, rigid tap, sub spindle, Y-Axis, 2002
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Mazak
Model: INTEGREX-300II-SY
Year: 2002
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mazatrol Fusion 640MT CNC Control, 4,666 Hours ...more
Mazak #Integrex-300Y, CNC lathe, 20" swing, 3.46" bore, 20" dia., 60.2" lgth, A2-8, 40 ATC, tailstock, chip conveyor, 1999
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: INTEGREX-300Y
Year: 1999
Mazak Integrex 30Y/1500 CNC Turning Center; 62" Length, 20" Swing, 3" Bar cap, 10" Chucks, Tailstock, Chip Conveyor, Coolant, C-Axis/Live Tooling, 40 ATC, Mazak Integrex 30Y CNC Turning Center, New: 1999, Turning Diameter: 20", Swing: 20", Machining Length: 60.2", Rapid Traverse: 393/472/708 IPM, Spindle Motor: 35 HP ...more
Mazak #Integrex-I-100S, CNC lathe, 20.9" swing, 6" chuck, 1.6" bar, Smooth HX Control, 213 psi thru spindle coolant, 2015
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: INTEGREX-I-100S
Year: 2015
2015 Mazak Integrex i100S, 2 Available!, Ran only medical! Mazak Smooth HX Ctrl, Mazak Integrex i100S CNC 6-Axis Multi-Tasking Turning Center, New: 2015 - 2 Available!, Max Swing Over Carriage: 20.9", Max Machining Diameter: 19.7", Max Cutting Length: 33.6", Max Distance Between Chuck Jaws: 35.55", X-Axis Stroke: ...more
Mazak #Integrex-J-300, CNC lathe, 26.7" swing, 10" chuck, 3-jaw, 3.1" bar, A2-8, Mazatrol Matrix Nexus, tailstock, chip conveyor, 2012
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: INTEGREX-J-300
Year: 2012
2012 Mazak Integrex J-300 5-Axis CNC Turning Center, Mazak Integrex J-300 5-Axis CNC Turning Center, New: 2012, Maximum Swing: 26.77", Max Cutting Diameter: 19.69", Max Cutting Length: 24.76", X-Axis Travels: 24.21", Y-Axis Travels: +/- 4.92", Z-Axis Travels: 27.36", B-Axis Tilt: 220 Degrees, CAxis Spindle Rotation: ...more
Mazak #Multiplex-6300, CNC lathe, Mazatrol 640T Control, 16.9" swing, 3" bar, 12" chuck, 2006
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Mazak
Model: MULTIPLEX-6300
Year: 2006
2006 MAZAK MULTIPLEX 6300, X-Axis. 12.2", Z-Axis. 23.82", Swing. 16.93", Machining Length. 25.59", Turning Dia. 16.93", Bar Capacity. 3.03", Chuck Size. 12", Power. 30 hp, Max RPM. 4,000 RPM, Turret Stations. 12 x 2, MAZAK Mazatrol 640T CNC Control, C-Axis on Both Spindles, High Pressure Coolant, Chip Conveyor, Tool ...more
Mazak #PowerMaster, CNC lathe, 34" swing, 60 HP, 1200 RPM
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Mazak
Model: POWERMASTER
Year: 1981
1981 MAZAK POWERMASTER, Swing. 34", Spindle Bore. 9.5 in, Power. 60 hp, Max RPM. 1,200 RPM.
Mazak #PowerMaster-N, CNC flatbed lathe, 35" swing, 25" chuck, 4-jaw, 10" bore, 120" centers, Fusion 640, chip conveyor, 2012
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: POWERMASTER-N
Year: 2012
Mazak PowerMaster N CNC Flatbed Lathe, Mazak PowerMaster N CNC Flatbed Lathe, New 2012, Swing Over Bed.: 35", Center Distance.: 120", Motor.: 50/60 HP, Spindle Bore.: 10" Through Head & Chucks, Spindle Speeds.: to 1200 RPM, Fusion 640 Control, Coolant System, 25" 4-Jaw Front Mounted Chuck, 25" 4-Jaw Rear Mounted ...more
Mazak #QT-20, 17.3" swing, 8" chuck, 11.81" dia., 17.5" lgth, A2-6, LNS barfeed, chip conveyor, 1997
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Mazak
Model: QT-20
Year: 1997
, TRAVELS:, -X AXIS: 7.125" / 1200 IPM, -Z AXIS: 20.125" / 1300 IPM, MAX. SWING: 17.32", SWING OVER CARRIAGE: 10.00", MAX. CUTTING DIAMETER: 11.81", MAX. MACHINING LENGTH: 17.50", SPINDLE SPEED: 50 - 5000 RPM, SPINDLE NOSE: A2-6, SPINDLE BORE: 2.44 IN, NUMBER OF TOOL TURRET POSITIONS: 8, STROKE OF TAILSTOCK BODY: ...more
Mazak #QTN-30, CNC lathe, 10" chuck, 2.7" hole, 12" dia., 12 turret, Mazak T-Plus, programmable quill tailstock, Jorgenson chip conveyor, 1997
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: QTN-30
Year: 1997
Mazak QTN-30 CNC Lathe, Mazak QTN-30 CNC Turning Center, New 1997, Max. turning diameter: 12", max centers: 38", Chuck Size: 10", Spindle Hole: 2.7, Mazak T-Plus Control, Tool setter, Jorgenson chip conveyor, 12 position turret, Programmable quill tailstock.
Mazak #QTN-100, CNC lathe, 21.6" swing, 6" chuck, 2" bar, 12.1" machining length, 11" turning diameter, 2005
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Mazak
Model: QTN-100
Year: 2005
2005 MAZAK QTN 100, Swing. 21.6", Machining Length. 12.1", Max. Turning Diameter. 11", Chuck Size. 6", Bar Capacity. 2", Power. 15 hp, Max RPM. 6,000 RPM.
Mazak #QTN-200, CNC turning center, 24" swing, 8" chuck, 3-jaw, 2.6" bar, 13.78"dia., 20.16"lgth, A2-6, 12 turret, Mazatrol 640T, tool presetter, tailstock, rigid tap, 2005
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Mazak
Model: QTN-200
Year: 2005
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mazatrol 640T Nexus CNC Control, Rigid Tapping ...more
