7 Results
2" Canton #11A, alligator shear, 12" x 5" x 1-1/4" knives, air clutch, foot trip, 10 HP, 45 SPM
Yoder Machinery Sales | Holland, OH
Category: Alligator Shears
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Canton
Model: 11A
SERIAL. 12354MODEL. CANTON #11ABAR CAPACITY. 2" SQUARE MILD STEELPLATE CAPACITY. 12" X 3/8" MILD STEELPIPE CAPACITY. 4" STANDARDKNIVES. 12" X 5" X 1-1/4"SPEED. 45 SPMJAW OPENING. 8"AIR CLUTCH. YESFOOT TRIP. YESMOTOR. 10 HORSEPOWER.
18" Canton #22A, Alligator Shear, Left Hand, 10 HP, 480 V., 33-36 SPM
Revelation Machinery | Chicago, IL
Category: Alligator Shears
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Canton
Model: 22A
Year: 1970
Make: Canton, Model: 22A, Year: 1970, Machine Location: Georgia, Blade Length: 18″, Motor Power: 10 HP, Voltage: 3 Phase, 480 V, 60 Hz, Capacity (Mild Steel Bar): 3″ Round, Capacity (Mild Steel Plate): ½″ Plate × 24″ Width, Cuts Per Minute: 33-36 SPM.
24" Canton #22A, alligator shear, right hand, 10 HP, 480 V., air-actuated hold down, 1970
Revelation Machinery | Chicago, IL
Category: Alligator Shears
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Canton
Model: 22A
Year: 1970
Make: Williams Form Engineering, Model: 22A, Year: 1970, Machine Location: Georgia, Blade Length: 24″, Motor Power: 10 HP, Capacity: 4 x #11 Rebar ( 3″ Round Mild Steel), Blade Material Support: Mild Steel / Rebar / Bar Material, Voltage: 3 Phase 480 V, 60 Hz, Hold Down: Air-Actuated Hold Down Assembly.
24" Canton #22A, alligator shear, right hand flow, 24" shear length, 10 HP, air actuated hold down assembly
National Machinery Exchange | Newark, NJ
Category: Alligator Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Canton
Model: 22A
24" HILL ACME CANTON 22A ALLIGATOR SHEAR, MANUFACTURER - HILL ACME CANTON, MODEL - CF 22 AAR, TYPE - ALLIGATOR SHEAR, DIRECTION - RIGH HAND FLOW, SHEAR LENGTH - 24", MOTOR - 10 HP WEG CONSTANT DUTY MOTOR, VOLTAGE - 3 PH, 480 VOLTS, 60 CYCLE, INCLUDES:, AIR ACTUATED HOLD DOWN ASSEMBLY, CONTROL PANEL.
Canton #11A, alligator shear, 24" L x 5" D x 1-1/4" thick knives, 8" jaw opening, 456 CPM
National Machinery Exchange | Newark, NJ
Category: Alligator Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Canton
Model: 11A
CAPACITY: 2" SQUARE OR 3/8" X 24 IN MILD STEEL, BUSHINGS: BRONZE BUSHD THROUGHT ON KINGPIN, CRANKSHAFT, COUNTERSHAFT AND, PITMAN ARM, MOTOR AND DRIVE: 5 HP/ 22/44O V 60 CYC/ 3 PH, AC DRIVE IS V-FLAT BLETS FROM GROOVED MOTOR SHEAVE TO FLAT, FACE FLYWHEEL, CUTS PER MINUTE: 456, KNIVES: 24" LONG, 5" DEEP & 1 1/4" ...more
Get email updates for newly added Alligator Shears
Alligator shears (also known as lever shears or crocodile shears) are heavy-duty cutting machines with a hinged, blade-like jaw used to cut scrap metal and other materials into smaller pieces. These shears are commonly used in scrap yards and recycling facilities to prepare metal for processing by cutting through items like pipes, rebar, and metal rods.
Canton #22A, rebuilt
Gensco Equipment Co Ltd | Toronto, ON
Category: Alligator Shears
Seller: Gensco Equipment Co Ltd
Location: Toronto, ON
Mfr: Canton
Model: 22A
Canton 22A Fully Rebuilt, Capacity: 4 x #11 - 35 MM, All new bronze bushings, New blades, New Electrics, New air package with Eaton Air Clutch, Brake Installed, Ready to hook to power!.
Canton #44A
Gensco Equipment Co Ltd | Toronto, ON
Category: Alligator Shears
Seller: Gensco Equipment Co Ltd
Location: Toronto, ON
Mfr: Canton
Model: 44A
Canton 44A, Capacity: 6 x #11 - 35 MM, All new bronze bushings, New blades, New Electrics, New air package with Eaton Air Clutch, Brake Installed, Ready to hook to power!.
