Manufacturer: Trak
Model: 2470RX
Year: 2024
Swing: 24.0
Chuck: 12
Bar Capacity: 4.0
Centers: 70.0
Stock # 8079293
1 / 2
Click to zoom in
1 / 2
For Sale by KD Machinery
Surplus Record Dealer Since 2026
Location: Scottsdale, AZ
Contact Sales Dept.
Phone Number: 480...> Show Phone Number 480-565-7310
Let the seller know you found their listing on Surplus Record!
Description
Used Trak 2470RX (2024) CNC Lathe for Sale. This machine offers a 24″ swing, 14.5″ turning diameter, 70″ distance between centers, a 12″ chuck and 4.09″ bar capacity. A 15 HP spindle motor drives spindle speeds to 1,800 RPM through an inverter-duty spindle drive with programmable speeds, and the lathe carries a 4-station turret. Equipped with a manual tailstock, tool post, steady rest, electronic handwheels and jogstick, brushless servo motors, CSS and IPR programming, and manual or CNC operation. Power requirement is 200V to 240V (3PH). Listed with very low hours. The lathe can be seen under power for an inspection. Browse our other used CNC lathes, then
| Chuck Size | 12" |
|---|---|
| Bar Capacity | 4.09" |
| Swing | 24" |
| Turning Diameter | 14.5" |
| Spindle Speed | 1,800 RPM |
| Distance Between Centers | 70" |
| Turret | 4 Station |
| Power Requirement | 200V To 240V (3PH) |
| Spindle Motor | 15 HP |
Get Your Price from KD Machinery!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Southwestern Industries #TRAK-2470RX, CNC Lathe, 24" swing, 70" centers, 12.5" socs, 12" chuck, 4" bar, 15 HP, 1800 RPM, 2-axis digital read out, ProtoTRAK RLX control, 2018
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Southwestern Industries
Model: TRAK 2470RX
Year: 2018
This 2018 Southwestern Industries TRAK 2470RX CNC lathe runs a ProtoTRAK RLX control with the TRAKing software option, a 4-station turret, and a tailstock. It swings 24" over the bed with 70" between centers, and its 15 HP D1-8 spindle reaches 1,800 RPM across two speed ranges with a 12" chuck and 4.09" spindle bore. ...more
JUST ADDED!
Romi #G30, CNC Lathe, 10.04" X, 40.15" Z, 22.8" swing, 40.15" cutting length, 12.6" turning diameter, 12" chuck, 3.7" bar, 30 HP, 2300 RPM, 12 station turret, Fanuc 21iT control, 1999
Category: CNC Lathes and Turning Centers
Seller: Machinery Inc
Location: Sherbrooke, QC
Mfr: Romi
Model: G30
Year: 1999
ROMI MODEL G30 CNC LATHE with Fanuc 21i t control, Manufacturer: ROMI, Model: G30, Year: 1999, Cutting Diameter 12.6", Max Swing 22.8", Cutting Length 40.15", X-Axis Travel 10.04", Z-Axis Travel 40.15", Y-Axis Rapid 708 IPM, Z-Axis Rapid 945 IPM, Spindle Nose: TBC, Spindle Bore: TBC, Spindle Bar: 3.75", Spindle Speed: ...more
JUST ADDED!
Daewoo Doosan #Puma-SMX3100LS, multi-axis CNC lathe, 26" swing, 12" chuck, 4" bar, 100" length, A2-11, 40 HP, 80 ATC, sub spindle, Y-Axis, 2023
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Daewoo Doosan
Model: PUMA-SMX3100LS
Year: 2023
All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc Series 31i-Model B5 Plus CNC Control, Rigid Tapping ...more
JUST ADDED!
Johnford #SL-650A, CNC turning center, 22.8" swing, 60" centers, 12" chuck, 4" bar, 3,500 RPM, 25 HP, 12 station turret, tailstock, 2015
Category: CNC Lathes and Turning Centers
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Johnford
Model: SL-650A
Year: 2015
Johnford SL-650A CNC Turning Center, Fanuc 0i-TD CNC Control, 12" 3-Jaw Chuck, 22.8" Swing, 60" Center Distance, 4.05" Bar Capacity, 3500 Max RPM Spindle, 12 Position Turret, Coolant Tank, Chip Conveyor, New 2015., 2015 JOHNFORD SL-650A, WYPOSAŻONY W:, Fanuc 0i-TD CNC Control, 12" 3-Jaw Chuck, 22.8" Swing, 60" Center ...more
Johnford #SL-500A, CNC turning center, 22.8" swing, 31" centers, 12" chuck, 4" bar, 35 HP, 2,800 RPM, Y-Axis, live tooling, sub spindle, 2018
Category: CNC Lathes and Turning Centers
Seller: Lion Machinery LLC
Location: Chicago, IL
Mfr: Johnford
Model: SL-500A
Year: 2018
2018 Johnford SL-500A CNC Lathe in used condition. s: 22.8" swing, 28.0" machining length, 12.0" chuck size, 4.13" bar capacity, 35.0 horsepower, 3500 RPM max, 17.7" turning diameter, with tailstock. No live tooling or sub spindle., Chuck Size: 12, Swing Over Bed: 22.8, Swing Over Cross: 17.7, Center Distance: 31 ...more
