Estimated monthly payment valid upon approved credit.
Description
The Southwestern Industries (SWI) TRAK DPM SX2 is a 2010 3-axis CNC bed mill with a 49 x 9 inch table and a ProtoTRAK SMX CNC control, listed by the seller as a new 2021 SMX controller. It travels 32 inches in X, 16 inches in Y and 27 inches in Z, with a spindle speed range of 70 to 4,200 RPM from the variable-speed drive, an R8 spindle taper and a 3 HP spindle motor. Other listed specifications include a 3-3/8 inch quill diameter with 5 inch maximum quill travel, three T-slots of 0.63 inch width at 2.5 inch pitch, spindle center to column face of 18 inches, maximum spindle nose to table distance of 27 inches, table height of 33 inches from the bottom of the bed, a maximum workpiece weight of 1320 lbs and a 150 IPM rapid traverse. Maximum capacities in mild steel with the variable-speed head are 1 inch diameter drilling and 5/8 inch tapping. The ProtoTRAK SMX offers 2 or 3-axis CNC with 3-axis DRO, real handwheels, a 10.4 inch color screen and USB connectors. Power requirements are 220/440V, 3-phase for the machine with the variable-speed head and 110V, 1-phase for the control. The machine includes a Kurt D675 Anglock precision vise, a Maxi Torque-Rite power drawbar, a Kool Mist coolant system and way covers. Net weight is 3200 lbs. The machine is in good condition. The serial number is 103CR62966. Contact us for more information or to arrange an inspection.
, New 2010 with new 2021 SMX Controller, Spec Sheet:, SOUTHWESTERN INDUSTRIES TRAK DPM SX2 3-AXIS CNC BED MILL, KURT VISE, MAXI TORQUE-RITE POWER DRAWBAR, KOOL MIST SYSTEM, SN: 103CR62966, TABLE SIZE: 49" X 9", TRAVEL (X, Y, Z AXIS): 32" X 16" X 27", T-SLOTS (NUMBER X WIDTH X PITCH): 3 X.63" X 2.5", QUILL DIAMETER: 3 ...more
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, ProtoTRAK SMX 3-Axis CNC Control, Two-Speed ...more
The Southwestern Industries (SWI) TRAK DPM SX2P is a 2011 3-axis CNC bed mill with a 49 x 9 inch table and a ProtoTRAK SMX CNC control. It travels 32 inches in X, 16 inches in Y and 27 inches in Z, with a spindle speed range of 70 to 4,200 RPM from the variable-speed drive, an R8 spindle taper and a 3 HP spindle ...more