Stock # 20062
Price: $8,500 USD
1 / 4
Click to zoom in
1 / 4
For Sale by JM Industrial LLC
Surplus Record Dealer Since 1993
Location: Millwood, WV
Contact Sheldon Sharp
Phone Number: 304...> Show Phone Number 304-273-0795
Let the seller know you found their listing on Surplus Record!
$8,500 USD
Description
Used Lump breaker Dewatering Screw Settling Solid Liquid Separation Tank
This is a custom build project that will require some additional design and fabrication to complete.
Constructed with 11 gauge stainless sheet and a mild steel support frame. Slurry is fed into the top of tank end. It is then agitated and mixed by 3- powered horizontal drums. They are driven by a pair of 2HP gearmotor/chain drives. Solids that fall into the 8" auger is then conveyed across a perforated screen. Particles then drop into a 4" bottom auger to be extracted from the tank. The separated liquids spill out of the rear of the tank by an 8" X 48" spillway. The construction on the solids conveyors has not been completed on the discharge end and will require drives on the oposite ends. There are additional augers, trough and screen sections included with purchase.
This is a custom build project that will require some additional design and fabrication to complete.
Constructed with 11 gauge stainless sheet and a mild steel support frame. Slurry is fed into the top of tank end. It is then agitated and mixed by 3- powered horizontal drums. They are driven by a pair of 2HP gearmotor/chain drives. Solids that fall into the 8" auger is then conveyed across a perforated screen. Particles then drop into a 4" bottom auger to be extracted from the tank. The separated liquids spill out of the rear of the tank by an 8" X 48" spillway. The construction on the solids conveyors has not been completed on the discharge end and will require drives on the oposite ends. There are additional augers, trough and screen sections included with purchase.
Inquire Further with JM Industrial LLC!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Grinder / crusher, 10.5" diameter, 6.3 KW, 1445/1730 RPM, 400/460/690 V.
Category: Lump Breakers
Seller: HGR24
Location: Euclid, OH
10.5” DIAMETER, 1445/1730 RPM.
Lump catcher with cleanout port, 4.5" OD inlet, 6" ID outlet, 9" OD outlet flange
Category: Lump Breakers
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 1588-1: LUMP CATCHER WITH CLEANOUT PORT, 4.5″ OD INLET, 6″ ID OUTLET, 9″ OD OUTLET FLANGE, STAINLESS CONSTRUCTION.
Mill Engineering & Machinery, Dual Corrugated Roll Lump Breaker, 6" diameter x 12" long rolls, 24" x 14" feed hopper, 1 HP, 230/115 Volt
Category: Lump Breakers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mill Engineering and Machinery Co. dual corrugated roll lump breaker designed for reducing soft agglomerates and conditioning powders or bulk solids. Unit s approximately 6" diameter x 12" long corrugated rolls, 24" x 14" feed hopper, and 1 HP Century drive motor with 230/115V, 60Hz electrical requirements. Mounted on ...more
Machine & Process Design Inc., de-lumper & auger feeder, fixed blade de-lumper powered by a 10 HP drive
Category: Lump Breakers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Machine & Process
Machine and Process Design Inc, de-lumper and auger feeder. a 12" diameter charge port, fixed blade de-lumper powered by a 10 hp drive, 57" long x 35" wide x 15" deep hopper, (2) 64" long x 9" diameter carbon steel screw conveyors on 3" diameter shafts with 5" centers powered by ...more
Jacobson #I2214-B, Prebreaker, 16" x 22" feed opening, 36" H Discharge, 4" x 22" Shaft, 10 HP, 230/460 V
Category: Lump Breakers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Jacobson
Model: I2214-B
Used Jacobson model I2214-B prebreaker. Has approximately 16" X 22" feed opening, single shaft design with rigid hammers (teeth). 36" high discharge height. Single shaft driven by 10 HP 230/460 volt motor. Shaft is 4" X 22". Serial #31574., JACOBSON I2214-B.
