Manufacturer: Daewoo Doosan
Model: DNM-750II
Year: 2022
Automatic Tool Changer: 30
Longitudinal" X: 64.0
Cross" Y: 30.0
Vertical" Z: 25.6
RPM: 12000
1 / 8
Click to zoom in
1 / 8
For Sale by Olympia Technical Services
Surplus Record Dealer Since 2018
Location: Whitby, ON Canada
Contact Scot Samek
Phone Number: 289...> Show Phone Number 289-980-2750
Let the seller know you found their listing on Surplus Record!
Description
With Chip conveyor, Fanuc I-Series Control, 15" Color monitor, 12000 RPM & CAT 40 spindle
TABLE LENGTH 64
TABLE WIDTH 30
X-AXIS TRAVEL 64.2
Y-AXIS TRAVEL 30
Z-AXIS TRAVEL 25.6
TABLE LOAD 3306 LBS
RAPID TRAVEL RATE XYZ 1181, 1181, 945 IPM
SPINDLE SPEED 12,000 RPM
DISTANCE TABLE TO SPINDLE 5.9 TO 31.5
SPINDLE MOTOR 20 HP
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 30
MODEL DNM 750-II
YEAR 2022
DIMENSIONS (LWH) 193 X 136 X 125
WEIGHT 29,700 LBS.
POWER REQUIREMENTS 220 V, 3 Ph, 60 Hz, 43 kVA
TABLE LENGTH 64
TABLE WIDTH 30
X-AXIS TRAVEL 64.2
Y-AXIS TRAVEL 30
Z-AXIS TRAVEL 25.6
TABLE LOAD 3306 LBS
RAPID TRAVEL RATE XYZ 1181, 1181, 945 IPM
SPINDLE SPEED 12,000 RPM
DISTANCE TABLE TO SPINDLE 5.9 TO 31.5
SPINDLE MOTOR 20 HP
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 30
MODEL DNM 750-II
YEAR 2022
DIMENSIONS (LWH) 193 X 136 X 125
WEIGHT 29,700 LBS.
POWER REQUIREMENTS 220 V, 3 Ph, 60 Hz, 43 kVA
Get Your Price from Olympia Technical Services!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Daewoo Doosan #DNM-750II, CNC vertical machining center, Fanuc I Series Plus Control, 64" X, 30" Y, 26" Z, 12000 RPM, 30 automatic tool changer, 2022
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Daewoo Doosan
Model: DNM-750II
Year: 2022
Stock #: 153260001, Brand: Doosan, Model: DNM750-II, Year: 2022, Travel Distance X-Axis: 64 in, Travel Distance Y-Axis: 30 in, Travel Distance Z-Axis: 26 in, Table Size: 64" x 30", Spindle Speed: 12,000 rpm, Spindle Power: 21 Hp, Spindle Taper: Big Plus CAT 40, Spindle Torque: 87 lb-ft, Tool Changer: 30-ATC ...more
JUST ADDED!
Daewoo Doosan #DNM-750II, Vertical CNC Machining Center, 64" X, 30" Y, 26" Z, 21 HP, 12000 RPM, 30 automatic tool changer, CAT 40, Fanuc control, 2022
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Daewoo Doosan
Model: DNM-750II
Year: 2022
Used vertical machining center featuring a 64x30x26 mm work area, 21 kW power, 12,000 RPM, 30 ATC, CAT 40 taper, and 3-axis operation., 2022 DOOSAN DNM 750II, X. 64", Y. 30", Z. 26", Power. 21 hp, RPM. 12,000 RPM, # ATC. 30, Taper. CAT 40, # Axis. 3, Control. CNC (Fanuc), Weight. 31680 LBS.
Daewoo Doosan #DNM-750II, CNC vertical machining center, Fanuc 1 Series, 64.2" X, 30" Y, 25.6" Z, 12000 RPM, 30 side mount tool changer, 2018
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Daewoo Doosan
Model: DNM-750II
Year: 2018
DOOSAN DNM-750II CNC VERTICAL MACHINING CENTER, Travels:, X-Axis: 64.2″, Y-Axis: 30.0″, Z-Axis: 25.6″, Rapid Traverse Rates X & Y Axis: 1181 IPM, Rapid Traverse Rates Z Axis: 945 IPM, Spindle Nose to Table (Min.- Max.): 5.9″ – 31.5″, Table:, Length: 64.2″, Width: ...more
Daewoo Doosan #DNM-750II, CNC vertical machining center, 30 automatic tool changer, 64.2" X, 30" Y, 25.6" Z, 12000 RPM, #40, 21 HP, 64.2" x29.9" tbl., Fanuc I, thru spindle coolant, 2018
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Daewoo Doosan
Model: DNM-750II
Year: 2018
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Doosan Fanuc i-Series CNC Control, 1,222 Hours ...more
JUST ADDED!
Daewoo Doosan #DNM-750-II, CNC vertical machining center, 30 automatic tool changer, 64" X, 30" Y, 26" Z, 12000 RPM, #40, 21 HP, 64" x30" tbl., Fanuc i Series Plus, Renishaw probe, Lyndex Nikken CNC260LFA-M rotary table w/ tailstock, 290 psi thru spi
Category: Vertical CNC Machining Centers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Daewoo Doosan
Model: DNM-750-II
Year: 2022
, Travel Distance X-axis, 64 in, Travel Distance Y-axis, 30 in, Travel Distance Z-axis, 26 in, Table Size, 64" x 30", Spindle Speed, 12,000 rpm, Spindle Power, 21 Hp, Spindle Taper, Big Plus CAT 40, Spindle Torque, 87 lb-ft, Tool Changer, 30-ATC, Dimensions (LxWxH), 157.5" x (117.6" + 52.1") x ...more
