Click to zoom in
For Sale by Mid Atlantic Machinery
Surplus Record Dealer Since 2025
Location: Harrisburg, PA
Contact Stephen Malaro
Phone Number: 717...> Show Phone Number 717-583-8013
Let the seller know you found their listing on Surplus Record!
Description
Description:
VacuMaster Comfort 90° vacuum lifter with 200kg capacity to lift 90x14x12in HVAC units up to 430 lbs. Ceiling mounted bridge crane with low-profile rail and 2 bridges (extra bridge to allow for 2nd lifter). Lifter with powered 90° tilt and manual +/- 90° horizontal rotation.
- Dry-running electric vacuum pump, 0.56 HP Electric linear actuator for 90° tilt, 1.2 HP Configured for 460V, 3-phase, 60Hz power.
- VacuMaster bow handle, Pivoting version, 400/600mm
- main beam, 1600mm
- Cross beam, 750mm
- suction cup holder
- flat suction cup, 125mm dia
- 2 speed electric chain hoist Model SCH-M, Capacity: 450 kg
- Control integration kit for hoist
- Suction cup shutoff valves
- Rotation-Horiz-Vm-500-90°
Manual horizontal rotation device for VacuMaster allows +/- 90° horizontal rotation of suction cup assembly (main beam, crossbeams & pads)below main lifter frame. Locking mechanism with 3-position detent to limit rotation to 90° left or 90° right (to manage hoses). Mounts between VM basic module and main beam.
Get Your Price from Mid Atlantic Machinery!
Buyers Who Viewed This Listing Also Viewed:
440 lb. ServoLift Drum Discharge System type #MZ, Stainless Steel Drum Lift, 200 kg max load, 150 bar max hydraulic pressure, 2015
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Servolift
Model: MZ
Year: 2015
Used ServoLift drum discharge attachment, type MZ, 200kg capacity, serial# 41466/2.
440 lb. Schmalz #Jumboergo-200, vacuum lift, 4.8 HP, 110 cfm air flow, 14.7" Hg suction, new
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schmalz
Model: JUMBOERGO-200
Year: 2026
SCHMALZ JUMBOERGO 200 VACUUM LIFTVacuum lifting for panels in horizontal orientation to reduce potential injury to employees.Capacity & s: -- Lifting capacity 440 Lbs. (200kg) non-porous materials without reduction in performance. -- Suitable for diverse loads such as sheets of particle board, plywood, glass ...more
440 lb. EHS #DT632, Drum Lift, 140 PSI, 5 CFM
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ehs Solutions
Model: DT632
Used EHS drum lift, model DT632, stainless steel construction, 200 kg max load, serial# 114111421601.
350 lb. Genie #GR-20, electric manlift, 20' lift height, 31" W platform, 398 hours, rotating jib, self propelled, 2012
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Genie
Model: GR-20
Year: 2012
ENGINE ------------------ ELECTRIC, HEIGHT ------------------ 20 ft, PLATFORM CAPACITY ------- 350 LBS., GRADE ABILITY ----------- 30%, TURN RADIUS ------------- ZERO INSIDE, PLATFORM WIDTH ---------- 31 in, HOURS ------------------- 398, ROTATING JIB., SELF PROPELLED., NON-MARKING TIRES., NOTES:, SUBJECT TO ...more
450 lb. Omega Design #OM100, pneumatic drum lift & dumper, Stainless Steel
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Omega Design
Model: OM100
Omega Design, Model OM100, Stainless steel pneumatic drum lift and dumper. Rated for a maximum load of 450 lbs. a 23½"OD top clamping hood with a 8" OD discharge and pneumatic butterfly flow valve. Lift has 60" of vertical travel with a 60" maximum discharge height. Control panel with push ...more
