Manufacturer: Hyd-Mech
Model: V-18
Year: 1998
Max Throat or Width: 18.00
Max Height / Under Guide: 28.00
Stock # 28832
For Sale by C.W. Wood Machinery Inc
Surplus Record Dealer Since 1965
Sales Dept.
800-74...> Show Seller's Phone Number 800-745-6008 Let the seller know you found their listing on Surplus Record!
Description
HYD-MECH TILT FRAME VERTICAL BAND SAW
MODEL: V-18
SERIAL NUMBER: J1198631 Year: 1998
GENERAL SPECIFICATIONS
Capacity, Rectangle: 18" x 28"
Capacity, Round: 18" Diameter
Capacity, Rectangle, 45 Degrees: 18" x 18"
Capacity, Round, 45 Degrees: 18" Diameter
Head Tilts: 45 Degrees Left or Right
Blade Size: 1-1/4"
Blade Speed, Infinitely Variable: 65 to 385 SFPM
Blade Wheel Diameter: 19"
Table Height: 38"
Maximum Work Load: 6000 Lbs.
EQUIPPED WITH
5 HP Blade Drive Motor
2 HP Hydraulic Drive Motor
Extended Head
Fixed 6 Degree Forward Canted Head
Stand Alone Control Console w/PLC 100P Control
Power Tilt
NOTE: Saw has been modified by previous owner and Hyd-Mech for specific application(s). Table plates have been removed. Vises have been removed. Stand alone control console was manufactured by Hyd-Mech. Saw may have additional alterations that are not stated here. Saw being sold As-Is, As-Inspected.
Approximate Weight: 4500 Lbs.
F.O.B. Cincinnati, Ohio
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER
MODEL: V-18
SERIAL NUMBER: J1198631 Year: 1998
GENERAL SPECIFICATIONS
Capacity, Rectangle: 18" x 28"
Capacity, Round: 18" Diameter
Capacity, Rectangle, 45 Degrees: 18" x 18"
Capacity, Round, 45 Degrees: 18" Diameter
Head Tilts: 45 Degrees Left or Right
Blade Size: 1-1/4"
Blade Speed, Infinitely Variable: 65 to 385 SFPM
Blade Wheel Diameter: 19"
Table Height: 38"
Maximum Work Load: 6000 Lbs.
EQUIPPED WITH
5 HP Blade Drive Motor
2 HP Hydraulic Drive Motor
Extended Head
Fixed 6 Degree Forward Canted Head
Stand Alone Control Console w/PLC 100P Control
Power Tilt
NOTE: Saw has been modified by previous owner and Hyd-Mech for specific application(s). Table plates have been removed. Vises have been removed. Stand alone control console was manufactured by Hyd-Mech. Saw may have additional alterations that are not stated here. Saw being sold As-Is, As-Inspected.
Approximate Weight: 4500 Lbs.
F.O.B. Cincinnati, Ohio
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER
Get Your Price from C.W. Wood Machinery Inc!
Buyers Who Viewed This Listing Also Viewed …
18" x 20" Hyd-Mech #V-18, saw with blades
Category: Vertical Band Saws
Seller: Protectoplas
Location: Streetsboro, OH
Mfr: Hyd-Mech
Model: V-18
Verticle band saw comes with stack of additional blades. Saw is in good working condition, still installed, still in use. will take best offer, motivated to reclaim this floor space.
18" x 20" Hyd-Mech #V-18, vertical band saw
Category: Vertical Band Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Hyd-Mech
Model: V-18
CAPACITY. 18 ½” x 20 ½”, CAPACITY AT 45°. 18 ½” x 13”, CAPACITY ROUND. 13”, HEAD TILTS EITHER WAY. 45°, BLADE SPEED. 65-385 FPM, BLADE SIZE. 1 ¼” x 14’ 11”, HEAD FEED RATE. 0-15 JPM, FEED PRESSURE. 0-300 PSI, MAIN DRIVE MOTOR. 5 HP ...more
20" Hyd-Mech #V-18, tilting vertical band saw, 20" x 1-1/4" blade, 7-1/2 HP, 2001
Category: Vertical Band Saws
Seller: Long Machine Tool Co
Location: Ferris, TX
Mfr: Hyd-Mech
Model: V-18
Year: 2001
Hyd-Mech Tilting Veertical Band Saw, Model V-18 Serial J0906198 New 2001, Capacity Vertical 20", Capacity Horizontal 18", Capacity @45` 13", Blade 14'11" x 1-1/4", Blade Speed 65 to 325 SFM, Carbide Guides, Hydraulic vises, guide arm, head tilt, feed system, Motor Blade 7-1/2, Motor Hydraulic 2, Wired Voltage 440 ...more
18" x 20" Hyd-Mech #V-18, vertical bandsaw, 1-1/4" x 14'11" blade, 7.5 HP, 65-385 SFM, 2004
Category: Vertical Band Saws
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Hyd-Mech
Model: V-18
Year: 2004
HYDMECH (USED) MODEL V-18 VERTICAL MITERING, BANDSAW, HYDRAULIC SAW HEAD SWING, ADVANCE AND RETRACT, PLUS HYDRAULIC VISES AND BLADE TENSIONING, CAPACITY, - 18" X 20" 90 DEGREE RECTANGLE, - 18" X 13" 45 DEGREE RECTANGLE, - 18" 90 DEGREE ROUND, - 13" 45 DEGREE ROUND, - 45 DEGREE LEFT/RIGHT ...more
18" x 20" Hyd-Mech #V-18, vertical band saw, 1.25" x 179" blade, 5 HP, 65-385 FPM, 1996
Category: Vertical Band Saws
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Hyd-Mech
Model: V-18
Year: 1996
Type:Saws, Saws, Band, VerticalManufacturer:HYD-MECHModel:V18Condition:GoodYear:1996Stock #:802751Status:For SaleSerial #:J0596281.
