Click to zoom in
For Sale by Smith Machinery Co
Surplus Record Dealer Since 2001
Location: Ames, IA
Contact Jim Smith
Phone Number: 515...> Show Phone Number 515-233-6330
Let the seller know you found their listing on Surplus Record!
Description
Specifications
Equipped With
Equipped With
| Capacity 90 Round Tube | 14 inches |
| Capacity 45 Round Tube | 14 inches |
| Capacity 60 Round Tube | 11.75 inches |
| Capacity Round Tube w/ clamps at 0 | 16" x 7.5" |
| Capacity 90 Solid Round Tube | 6 inches |
| Capacity 45 Solid Round Tube | 4 inches |
| Capacity 60 Solid Round Tube | 3 inches |
| Capacity Solid Round Tube w/ clamps at 0 | 6" x 5" |
| Capacity 90 Rectangle | 19.5" x 13.25" |
| Capacity 45 Rectangle | 17.25" x 8.5" |
| Capacity 60 Rectangle | 12" x 8.5" |
| Capacity Rectangle w/ clamps at 0 | 16" x 7.5" |
| Saw Blade (Width x Length) | 1.25" x 188" |
| Band DriveMotor HP | 4.75 HP |
| Band Speed | 65-325 FPM |
| Band Tension | Manual |
| Hydraulic System Motor HP | 1 HP |
| Hydraulic System Reservoir Capacity | 2.5 Gallon |
| Flood | yes |
| Mist Lubrication | yes |
| Coolant System Motor HP | .07 HP |
| Coolant System Reservoir Capacity | 4 Gallon |
| Length per Stroke | 39 inches |
| Maximum Index Strokes Length | 394 inches |
| Remnant Length | 3 inches |
| Dimensions (W x L x H) | 102" x 86" x 58" |
| Material Pass Height | 31.5 inches |
| Machine Weight | 3307 pounds |
| Voltage Required | 460V, 60HZ, 3 PH |
Equipped With
Equipped With
EQUIPPED WITH:
- Swivel head to 60° right.
- Automatic cycle.
- Movable Control Console.
- Rapid head down approach.
- Carbide faced saw guide inserts with lead in bearings.
- Programable material height sensor.
- Full stroke hydraulic vises with nesting fixtures.
- Driven band cleaning brushes.
- Ball screw with incremental feed.
- Heavy duty counter balance springs.
- Cast steel band wheels.
- Fine adjustment head feed control.
- Overfeed protection.
- Infinite band speed controlled variable frequency drive.
- Mitsubishi touch screen controller.
- Digital angle position.
- Out of stock sensor.
- Manual band tension.
- Variable vise pressure.
- Recirculating coolant systems.
- Mist band lubricator systems.
- Work light.
- Saw blade guards.
- Band door interlocks.
- Operation and parts manuals on USB stick.
- Recommended band speed chart.
OPTIONAL FEATURES:
6.6' Output conveyor for angle cutting - 20.5" roller width - 1,142 lbs/ft. capacity: $2,823.00
6.6' Input or output conveyor with drip pan/gutter - 20.5" roller width - 672 lbs/ft. capacity: $2,575.00
5' Medium-duty idler conveyor 20" between frames roller capacity 850 lbs: $1,612.00
10' Medium-duty idler conveyor 20" between frames roller capacity 850 lbs: $2,619.00
Wear parts service kit - Lead-In bearings, carbide inserts, insert screws: $631.00
Chip pan with drain: $648.00
Magnetic wand chip remover: $195.00
A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable products safety standards.: $3,500.00
Additional USB stick of manuals: $91.00
DoALL Cut Above 10 Year Warranty Annual Investment: $1,960.00
Starter Kit of six pack blades consist of 1 each silencer plus 3-4, 4-6, 5-8, and StructurALL 3-4, 4-6, 5-8: $499.24
5 Gallon Pail of Band All 102 Semi Synthetic: $160.13
5 Gallon Pail of AL-2000 Mist Coolant: $239.68
DELIVERY:
SUBJECT TO STOCK
- Swivel head to 60° right.
- Automatic cycle.
- Movable Control Console.
- Rapid head down approach.
- Carbide faced saw guide inserts with lead in bearings.
- Programable material height sensor.
- Full stroke hydraulic vises with nesting fixtures.
- Driven band cleaning brushes.
- Ball screw with incremental feed.
- Heavy duty counter balance springs.
- Cast steel band wheels.
- Fine adjustment head feed control.
- Overfeed protection.
- Infinite band speed controlled variable frequency drive.
- Mitsubishi touch screen controller.
- Digital angle position.
- Out of stock sensor.
- Manual band tension.
- Variable vise pressure.
- Recirculating coolant systems.
- Mist band lubricator systems.
- Work light.
- Saw blade guards.
- Band door interlocks.
- Operation and parts manuals on USB stick.
- Recommended band speed chart.
OPTIONAL FEATURES:
6.6' Output conveyor for angle cutting - 20.5" roller width - 1,142 lbs/ft. capacity: $2,823.00
6.6' Input or output conveyor with drip pan/gutter - 20.5" roller width - 672 lbs/ft. capacity: $2,575.00
5' Medium-duty idler conveyor 20" between frames roller capacity 850 lbs: $1,612.00
10' Medium-duty idler conveyor 20" between frames roller capacity 850 lbs: $2,619.00
Wear parts service kit - Lead-In bearings, carbide inserts, insert screws: $631.00
Chip pan with drain: $648.00
Magnetic wand chip remover: $195.00
A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable products safety standards.: $3,500.00
Additional USB stick of manuals: $91.00
DoALL Cut Above 10 Year Warranty Annual Investment: $1,960.00
Starter Kit of six pack blades consist of 1 each silencer plus 3-4, 4-6, 5-8, and StructurALL 3-4, 4-6, 5-8: $499.24
5 Gallon Pail of Band All 102 Semi Synthetic: $160.13
5 Gallon Pail of AL-2000 Mist Coolant: $239.68
DELIVERY:
SUBJECT TO STOCK
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
14" x 20" Hem #DC-1420HIA-C, automatic dual column horizontal band saw, 1-1/4" x 17'-8" x .042" blade, 7.5 HP, 2013
Category: Horizontal Band Saws
Seller: Bridgeline Machinery Corp
Location: Deerfield, IL
Mfr: Hem
Model: DC-1420HIA-C
Year: 2013
JUST ADDED!
14" x 20" DoAll #500DS, mitering horizzontal band saw, 60° LR angle, laser light, coolant, 2015
Category: Horizontal Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: 500DS
Year: 2015
SERIAL. 593-15245MODEL. 500 DSYEAR NEW. 8/2015CAPACITY RECTANGULAR @ 90.DEGREES. 14" X 20"CAPACITY ROUND TUBE @ 90 DEGREES. 14.17"CAPACITY RECTANGLES @ 45 DEGREES. 15" X 7.5"CAPACITY RECTANGLE @ 60 DEGREES. 10.6" X 12.6"CAPACITY ROUNDS @ 45 DEGREES. 14.2""CAPACITY ROUNDS @ 60 DEGEEES. 12.2"BLADE SPEEDS, VARIABLE. 50 ...more
JUST ADDED!
14" x 20" Hem #DC-1420HA-C, Dual Column Horizontal Bandsaw, 7.5 HP, 440 V., 2013
Category: Horizontal Band Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Hem
Model: DC-1420HA-C
Year: 2013
Make: Hem, Model: DC-1420HA-C, Year: 2013, Machine Location: New Jersey, Cutting Capacity: 14″ x 20″, Blade Dimensions: 1-1/4″ × 17’8″ ×.042″, Blade Drive: 7.5 HP, Blade Speed: 72-400 SFPM, Hydraulic Drive Motor: 2 HP, Shuttle stroke: 0–24″ with multiple ...more
14" x 20" HEM #Twister, Horizontal Band Saw, 1.25" width x 180" L x 0.042" thick Blade, 18" Wheel Size, 5 HP, 220/440 V
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hem
Model: TWISTER
Spec, HEM TWISTER.
14" x 20" DoALL S-500CNC, Structural Band Saw, 65-328 FPM, 1-1/4" x 0.042" x 187" blade, 19.7" stroke
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
14” x 20" Band Saw with Mitsubishi Saw Control Flood Coolant Over Feed Protection Operations and Parts Manuals on CD or USB Data Stick Variable Frequency Drive Tool Kit Digital Read Out of Cutting Angle Complementary DoALL Cutting Fluids Package Pulley-Driven Band Brush One (1) Complimentary DoALL Bi-Metal Saw ...more
