Buy or Sell Your Reciprocating Gas Compressors

MANUFACTURER. ELECTRIC, MODEL.9T23B3872, WEIGHT.300LBS, TYPE.QL, PHASE.3, KVA.30, HZ.60, Machine Type.Transformers Manufacturer. ELECTRIC Model.9T23B3872 Year.N/A Condition.Used Weight.300 pounds.

1989 ELB 18" X 36" Horizontal Surface Grinder, Has been in storage for approximately 12 months awaiting its next owner, Can be powered up and run but interested party needs to be on-site to do so., Electrical panel is currently sitting on back of machine for moving, all wiring still intact., Comes with all ...more

Make: ELB, Model: SWBDE 15-ND, DRO in Y + Z Axes, Workrange: 60" x 26" x 15", Magnetic Table: 24" x 48", Over The Wheel Dresser, Coolant System with Paper Filter, Spare Norton 32A Grinding Wheel, Manufacturer Elb Model SWBDE15-ND 24" x 60" Surface Grinder Year 1990 Condition Used Serial Number 172350985 ...more

used- carrier aquasnap air-cooled liquid chiller, model 30rb270. rated for approximately 360 tons of cooling capacity. factory-packaged unit nine (9) high-efficiency hermetic rotary scroll compressors utilizing environmentally friendly puron r-410a refrigerant. s include a shell-and-tube direct expansion evaporator ...more

250 KW CUMMINS / ONAN NATURAL GAS OR PROPANE GENERATOR, -Mfg. 2009, -Model Number: 250GFEA, -Serial Number: KM09G043901, -Currently Setup 277/480 Volt, 3 Phase, -12 Lead Reconnectable, -60 Hertz, 1800 RPM, 0.8 PF, -24 Battery Volts, -Powered by a 19L Inline 6 Cylinder Turbocharged Cummins Natural Gas or Propane ...more

SERIAL. AAW56485, MODEL. G213, AMPS. 30 TO 265, KILOWATTS. 3 KVA, POWER OUTLETS. 110 & 220 VOLTS, ENGINE. 2 CYLINDER GAS.

3/8"-23-1/2" Min/max. width 2-" - 50 Capacity: 300 lbs/ft| CNC Control| 3 Side Cutting Ability, COMPRESSED AIR: 105 Gallon per minute (400L/min), Consumption: 21 Gallon per minute (80L/min), Plasma gas: O2 (Clean, dry, oil-free), Max oil content: 18.34 ppm, Max water content: 9.7ppm, Max pressure dew point: 37.4F, Max ...more

Brand.: Brown & Sharpe, Model.: 618 Micromaster, Chuck Size.: 6″ x 18″, Chuck Type.: Magnetic, Table Speed.: 5-100 FPM, Maximum Cross Travel: 7″, Dust Collector.: Brown & Sharpe, Machine Type.Grinders, Surface, Electromagnetic Chucks Manufacturer.BROWN & SHARPE Model.618 Micromaster ...more

For sale is one (1) used Cleaver Brooks CB Packaged Firetube Boiler. Model: CBE 700250. Natural Gas Only. 250 HP. 125HW (Hot Water) PSI. 10,460,000 BTU/Hr., The Model CB boiler is a packaged firetube boiler of welded steel construction and consists of a pressure vessel, burner, burner controls, forced draft fan ...more

Brand/Model: Gardner Denver TA5D : Used Gardner Denver TA5D triplex production pump package with the following s: • 5" stroke • 150 HP • Steel block fluid end • 1 1/2" steel plungers • 3" NPT suction connection • 2" NPT discharge connection • Packaged on skid with ...more

Brand/Model: Oilwell 510-P : Used Oilwell 510-P duplex pump with the following s: • 10" stroke • 120 HP • Cast steel fluid end • 5" pistons and liners • 4" 300# suction connection • 3" 300# discharge connection • 5.05 gear ratio • Weight 4,600 lbs • Dims ...more

Engine Type - Diesel, Towable, Highway, Trailer Mounted.

Used Scaife & Sons 15 HP air compressor in functional condition. Ideal for various industrial applications. Efficiently powers tools and machinery. Reliable brand ensures durability. Suitable for businesses seeking cost-effective equipment solutions., (1) Used 15 HP Air Compressor, (1) Used 15 HP Air Compressor.

Brand/Model: Gardner Denver (TDE) GD-180T : Used Gardner Denver (TDE) GD-180T pump, with the following s: • 5” stroke • 180 HP • Aluminum Bronze fluid end • 2.5” Ceramic plungers • AR Valves • 4” ANSI #150 suction • 2” ANSI #1500 discharge • Weight: 4,860 ...more

Brand/Model: Bethlehem B-200-L : Used complete pump, power end is disassembled, has timing chain case approximately 3:1, 23" centers, steel billet fluid end with 3.25" colmonoy plungers. Capable of 344gpm @ 905psi with 3 3/4" plungers or 153gpm @ 2037psi with 2 1/2" plungers. Applications: Well ...more

PSI. 3400, GPM. 2.5, FUEL. GAS, FUEL TANK.68 GALONS, WAND. YES, HORSEPOWER. 8.32.

NotesBOM attached to listing.PowerCommand 3.3 MLD control panel. Sound attenuated level 2 enclosure. 100 amp distribution panel. Motorized louvers. Cold weather package. Includes interior, coolant, oil and generator end heaters., EngineBrandCumminsModelQSK60GSerial Number33241115Manufacture Date2026Fuel TypeNatural ...more

Used Doall surface grinder, model D1030-1, with model BD4-2 spindle, 220 volt, serial# 230-68160.

Model: 618, Overall Table Size.54" x 8", Hp.2, RPM.3450, Ph.3, Hz.60, Freight charges are not included in sale price. Freight scheduling and costs are responsibility of the buyer. Packaging charges to ensure safety of equipment during transport for arrival on buyers truck will be added when applicable., Manufacturer ...more

1990 Ingersoll-Rand XHP750WCAT, 750 CFM / 300 PSI, IR HR2 AIrend, CAT 3306 Engine.

Campbell Hausfeld 150 Gallon Air Compressor.

Wisconsin Walk-In Oven with double doors on one end with ceramic fiber gaskets and "BRIXON" spring latches provide a good seal. Aluminized steel interior with punched louvered air duct panels on both side walls and ceiling. Side mounted Eclipse package burner with UV flame safety and electronic spark ignition. ...more

Nova Dry Kiln, 26′ wide x 25′ deep, holds 5500-12000 board feet, propane or Natural Gas fired.

Voltage: 460 / 3-PH / 60 HZMotor Size: 40 HPFull Load Amps: 52Design Airflow: 33,000 CFM (up to 45,000)Min. BTU/HR: 170 MBHMax BTU/HR: 3575 MBHGas Supply: Natural Gas @ 10 W.C. Min / 5 PSI MaxDimensions: 15’ long x 8’-8” high x 8’-11” wideWill load on customers truck.

6″ x 12″ Used Harig Surface Grinder :, Chuck Size 6″ x 12″, Perm Magnetic Chuck 6″ x 12″, Spindle Motor 1 HP, Weight 1,950 lbs., SKU 1703, Used Harig Surface Grinder Model Super 612 s:, Hand Operated, Work Light, Permanent Magnetic Chuck.

Curtis 7.5 HP Single Phase Compressor.

, 2 stage cast iron head, Disconnect, Pressure switch, Pressure gauge.

Machine Type.Air Compressors, Tank Mounted Manufacturer.CAMPBELL HAUSFELD Model.N/A Year.N/A Condition.Used.

Joy/Cameron C8 Series TA28 Centrifugal Compressor, 500HP, 460V, 2600 icfm @ 100psig.

Make: Ajax, Model: SRNG-10, Year: 2005, Machine Location: Missouri, Model #: SRNG-10, Min. Relief Valve Capacity: 346, Max BTU/Hr Input: 420,000 / Min BTU/Hr Input: 336,000, BTU/Hr Output: 336,000 / Min BTU/Hr Output: 268,800, HP: 10, Heating Surface: 62, Gross E.D.R. : 1,400, M.A.W.P.: 150 PSIG, 120v 60hz,1ph, 12 ...more

Brand/Model: Continental Emsco DA-500 : Used Continental Emsco DA-500 duplex production pump with the following s: • 16" stroke • 500 HP • Ductile iron fluid end • 6" pistons • 10" suction connection • 4" discharge connection • Weight 35,600 lbs • Dims ...more

Machine Type.Air Compressors, Tank Mounted Manufacturer.CURTIS Model.N/A Year.N/A Condition.Used.

Brand/Model: Wheatley HP-375L : Used Wheatley HP-375L Quintuplex pump with the following s: • 6.125" stroke • 360 HP • fluid end • 4” plungers • 8" 150# RF suction connection • 4" 600# RF discharge connection • Weight • Dims 67"Lx89"Wx40"H ...more

Brand/Model: Union TX-150 : Used Union TX-150 triplex production pump with the following s: • 5" stroke • 200 HP • Three piece steel fluid end • 2.25'' plungers • No crankshaft, capable of 40 gpm @ 5000 psi @ 303 rpm with 1.625" plungers or 78 gpm @ 3018 psi @ 303 rpm with ...more

Brand/Model: Gaso 5884 : Used Gaso 5884 quintuplex production pump with the following s: • 5" stroke • 300 HP • Aluminum bronze fluid end with steel manifolds • 2" plungers • 4" 300# suction connection • 2" 2500# discharge connection • Weight 9,000 lbs • Dims ...more

Brand/Model: Union TX-150 : Used Union TX-150 pump, with the following s: • 5" stroke • 150 HP • #4 DA Stainless Steel fluid end • 4" Steel plungers • Disc valves • Gear Ratio 5.764 • 6" RF suction • 3" RF discharge • Weight: 5,560 lbs. • Dims: ...more

Used Curtis 10 HP air compressor., CURTIS 10 HP.