Buy or Sell Your Manipulators

New Webb 40-Ton Turning Roll Set, Model: R1000-20, 80,000lb Capacity, 6'' - 20 ft Diameter Range, 7 - 58 IPM Variable Speed Range, 460 Volt Input, Includes:, Hand Pendant Controller, 1 Year Warranty.

Capacity 6,000 LBS. Table Size 48" Tilting Range 0 - 135 Degrees Motorized Horsepower 3 H.P. x 2 Motors Voltage 460V ~ 3 Phase Dimensions (WxDxH) 110" x 89" x 74" s Foot Pedal Power Tilt Power Rotation Push Button Pendant Controller.

Used WeldWire 20-Ton Turning Roll Set, Model: WWRD-20ST / WWRI-20ST, Single Tire Model, 40,000lb Capacity, 6'' - 16ft Diameter Range, 0 - 56 IPM Variable Speed Range, 460 Volt Input, Hand Pendant Controller, 1 Year Warranty.

Used Preston Eastin 200-Ton Turning Rolls, Model: TDSA-200 / TISA-200, 400,000 Pound Capacity, 8'' - 15 ft Diameter Range, 0.4'' - 33 I.P.M. Variable Speed Range, 5hp Drive Motor, Remote Hand Pendant, 90 Day Warranty.

Model: LD4, MADE IN USA, 400lb Capacity 20 ½’’ Table 3/8’’ Center Thru Hole for Purge 300 Amp Welding Ground Variable Speed Rotation On-Off Foot Pedal 1 Year Warranty, Optional 15’’ Chuck Available.

SERIAL. TS-42, MODEL. HS- 60, CAPACITY HEAD. 6,000 LB MAX., AREA OF T SLOTTED TABLE. 42" X 42", NUMBER OF T SLOTS. 9, FLOOR TO TABLE CENTER. 30", FORWARD & REVERSING. YES, AIR RAIL CLAMPING. YES, MOTOR HORSEPOWER. 3, SEE STOCK # 77405 FOR TAIL STOCK.

SERIAL. 84510MODEL. HD45B-3, LOAD CAPACITY @ 12". 4,500 LBS, LOAD CAPACITY @ 60". 1,250 LBS, TABLE SIZE. 36" X 36", ROTATIONAL TORQUE. 54,000 lbs, TILT RANGE DEGREE. 0 TO 135, POWER TILT. YES, FORWARD / REVERSE. YES, ADJUSTABLE LEGS. YES, TILT MOTOR. 1 HORSEPOWER, ROTATION MOTOR. 1 HORSEPOWER, Parts Machine. Yes.

Used Aronson 2,500lb Welding Positioner, Model: SHD-25A, 2,500lb Capacity, Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 30'' x 30'' Square Table, New Pacemaster Controller, New Hand Pendant Controller, New Foot Pedal, 90 Day Warranty.

WeldWire Co 20,000 Pound Floor Turn Table, New with 1 Year Warranty, Model: WWFT-20, 20,000 Pound Capacity 24 ¼’’ Table Height 60’’ Diameter Table 0.04 rpm – 1.1 rpm Rotational Speed Range 120 Volt Input Includes: Hand Pendant Controller 1 Year Warranty Optional Accessories: Foot ...more

New Pandjiris 3,000lb Headstock with Gripper Chuck Package, Headstock: New Pandjiris, Model: HS-30, 3,000lb Capacity, 30'' x 30'' Square Table, 120 Volt Input, Variable Speed Rotation, NO Tilt, 1 Year Warranty, Gripper Chuck: New Pandjiris, Model A, 1 1/2'' - 27'' Diameter Range ...more

Weld Wire 30-Ton Tank Turning Rolls, 1- Driver, 2- Idlers, Driver Model- WWRD30ST, Idler Model- WWRI30ST, Capacity With 1 Drive 2 Idler- 90,000lbs, Diameter Range- 6'' - 16', Input 460 Volt.

Used Aronson 50,000lb Positioner, Model: GE500CS, Serial: 6918, 50,000 Pound Capacity @ 12'' COG, Powered Gear Elevation, 72'' x 72'' Square Table, 12'' Thru Hole, Variable Speed Rotation, 460 Volt Input, Hand Pendant Controller, 90 Day Warranty.

STEAM TURBINE ROTOR STANDS, 385 TON COMBINED CAPACITY, 175,000 KG MAX PER STAND, 143" FLOOR TO V, 155" OAH, FOOTPRINT 120" X 62", CONTACT SURFACE BRASS 10 1/2" X 23", WEIGHT 28,140 LBS EACH, MADE BY AUTOMATION IG.

Used Webb 10-Ton Tank Turning Rolls, Model: T-18-16, 20,000 lb Capacity per Set (1 Driver & 1 Idler), 8'' - 12' Diameter Range, 120 Volt Input, 5.5 - 55 IPM Variable Speed Range, Hand Pendant Controllers, 90 Day Warranty.

New Webb 10-Ton Tank Turning Rolls, Model: T18-16, 20,000 Pound Capacity, 8'' - 12 ft Diameter Range, 5.5 - 55 I.P.M. Variable Speed Range, 16'' Diameter Rubber Tires, 120 Volt Input, Hand Pendant Controller, 1 Year Warranty.

500 LBS PRESTON EASTIN PA-5MT WELDING POSITIONER W/ SCISSOR LIFT, MAKE: PRESTON EASTIN, MDL: PA-5MT, S/N: PA5-620, CAPACITY: 500 LBS @ 4", DIAMETER OF TABLE: 22", ROTATION SPEED: 0.3 TO 3.7 RPM, TILT RANGE: 0 TO 135 DEGREE, ROTATIONAL TORQUE: 2000, ELECTICAL FOOT PEDAL: YES, PHASE: 1, VOLTS: 110, SCISSOR LIFT TABLE ...more

SERIAL. 613, MODEL. GE-500, CAPACITY. 50,000 LBS, TABLE. 84" X 84", TILT LOAD TORQUE. 1,050,000 LB./IN., ROTATIONAL LOAD TORQUE. 600,000 LB./IN., PENDANT CONTROL. YES, POWER TILT. 145 DEGREE, POWER ROTATION. MULTI SPEED PER GEAR BOX, VARIABLE SPEED ROTATION. YES.

12 Ton Chain Rotating Machine with Remote Controller W/ 5 Meter Cable Length, Automatic Closing of Chain Levers Upon Loading the Piece, Sturdy Chain Gear Structure, Reducer Mechanism with Auto - Blockage System Motors with Brake & Forced Fan Cooling., Overall Load Capacity: 12 Tons, Rotating Capacity: 3.9’ ...more

Used WeldWire 2-Ton Turning Rolls, Model: WWRD-2, 4,000lb Capacity with 1 Driver & 1 Idler, 6,000lb Capacity with 1 Driver & 2 Idlers, 3 1/2'' - 40'' Diameter Range, 0 - 91 IPM Speed Range, 1/4 HP AC Motor, 110 Volt Input, 30 Day Warranty.

Ransome Vessel Rotating Rolls, Model: BPRR / BIRR, 60,000 Pound Capacity, 12'' - 20 ft. Diamater Capacity, Input 460 Volt, Variable Speed, Remote Hand Pendant Controller, 30 Day Warranty.

Used Preston Eastin 10,000lb Positioner, Model: PA-100-HD, 10,000 Pound Capacity @ 12'' COG, 54'' x 54'' Square Table, Powered Gear Tilt, Variable Speed Rotation, Height Adjustable Height Base, Hand Pendant Controller, 460 Volt Input, 90 Day Warranty.

Stock #: 180250031, Location: Decatur, GA, Brand: Ransome, Model: #40-P, Serial #: 688, Approx. Shipping Weight: 2,000 Lbs., Approx. Shipping Dimensions: 7' L x 5' W x 4' H, Skidding Fee: Skidding Unavailable, Capacity: 4,000 Lbs., Table Diameter: 59", Electrical: 240V 3PH, Pendant Controller ...more

Used Preston Eastin 3,000lb Floor Turn Table, Model: FT-30, 3,000lb Capacity, 36'' Diameter Table, 27'' Table Height, Variable Speed Rotation, 460 Volt Input, Hand Pendant Controller, Forward / Reverse Foot Pedal, 30 Day Warranty.

Used LJ Welding 20,000lb Pipe Positioner, Make: LJ Welding & Automation, Model: P20PS-100, Serial: 006, Year: 2015, 20,000 Pound Capacity @ 12'' COG, 47 1/2'' - 95'' Height Adjustment Range (Center of Table to Floor), Variable Speed Rotation, 480 Volt Input, Includes:, Lj Welding T-50 ...more

Aronson Welding Positioner GE500FBCS (Does not have Geared Elevation), Basic Load Capacity.50,000 Lbs., Eccentric.12", Center of Gravity.12", Rotation Torque.600,000 In./Lbs., Tilt Torque.1,050,000 In./Lbs., Table.84" Square, Total Tilt.135 Deg., Weight - Approximate.21,000 Lbs., Power Tilting Table, Variable Speed ...more

SERIAL. 7510805, MODEL. 1200-P, CAPACITY. 120,000 LBS, TABLE SIZE.84" X 84", POWERED ROTATION (ANY POSITION). 360 DEGREES, DESIGN. -45/+90 DEGREES, VOLTAGE. 220 OR 440, VARIABLE SPEED. YES, DYNAMIC BRAKING. YES, PUSH BUTTON PENDULUM REMOTE CONTROLLED. YES, ESTIMATED WEIGHT. 80,000 LBS.

Used Aronson 2,500lb Welding Positioner, Thru-Hole Model (Custom), Model: HD25A-BH, Serial: 811576, 2,500lb Capacity 30'' x 30'' Square Table 9'' Center Thru-Hole Powered Gear Tilt Variable Speed Rotation Adjustable Height Base 230 Volt Input, Includes: Hand Pendant Controller 90 Day Warranty.

WeldWire Co. 60-Ton Turning Rolls Set - Used, Model: WWRD-60 / WWRI-60, 1 Driver, 1 Idler makes a set., 120,000 Pound Capacity (1 Driver, 1 Idler) 8’’ – 18 ft Diameter Range (2) Rubber 20’’ dia Rubber Wheels (12’’ Face) 3 Horsepower Motor (Variable Speed) 1.2 - 50 I.P.M. Max ...more

Used Preston Eastin 200-Ton Turning Rolls, Model: TDRA-200, 400,000 Pound Capacity, 8'' - 30 ft Diameter Range, 1.4 - 42 I.P.M. Variable Speed Range, 10 HP AC Drive Motor, VFD Controlls, 480 Volt Input, Hand Pendant Controller, 90 Day Warranty.

Used Pandjiris 6,000lb Welding Positioner, Model: 60-12AB, 6,000 Pound Capacity @ 12'' COG, Powered Gear Tilt, Variable Speed Rotation, Height Adjustable Base, 48'' x 48'' Table, 600A Copper Welding Gorund, 460 Volt Input, Remote Hand Pendant Controller, 90 Day Warranty, Optional Accessories ...more

120,000 Lbs Capacity Welding Positioner with Pendant Control and Variable Rotation Speed., Capacity @ 12”: 120,000 Lbs, Capacity @ 18”: 96,000 Lbs, Capacity @ 24”: 80,000 Lbs, Table Size: 120” X 120”, Table Center Height: 98”, Tilt Capacity: 135°, Main Motor: 15 HP, Tilt Motor: ...more

RANSOME 10,000 LBS HEADSTOCK, MODEL- 5H, 1975 YEAR MODEL, 47-1/2'' TABLE WITH A 6'' THRU HOLE, ADJUSTABLE HEIGHT, CENTERLINE MIN. 35-1/2" MAX. 73-1/2", 47" CENTERLINE IN THESE PHOTOS, INPUT 240/440 VOLTS, S/N 6819266.

CAPACITY OF DRIVE ROLL. 5 TON, DIAMETER OF ROLLS. 16", WIDTH OF ROLLS. 4", RUBBER COATED WHEELS. YES, CENTER DISTANCE BETWEEN WHEELS. 17-1/2" MIN, 44" MAX, TANK DIAMETER. 4" TO 144", DRIVE ROLL ONLY MISSING WHEEL.

MODEL. AAAPRRR, CAPACITY 1 DRIVE 1 IDLER. 20 TON, MINIMUM TANK DIAMETER. 5", MAXIMUM TANK DIAMETER. 144" (12'), DIAMETER OF WHEEL. 16", WIDTH OF WHEELS. 10", SPEED VARIABLE. 1.2 TO 60 IPM, FORWARD & REVERSING. YES, FOOT PEDAL. YES, WHEELS. RUBBER, MOTOR. 2 HORSEPOWER.

New Driver / Used idler, Model: WWSD-10 / WWSI-10, 20,000 pound capacity, 6’’ – 13’ of diameter acceptance range, 120 Volt Input, Variable Speed Rotation, 120 Volt Input, 1 Year Warranty.

Used Teledyne Readco 2,500lb Positioner, Model: UPC-25, Serial: 10518, 2,500lb Capacity, 42'' Round Table w/ 1 1/2'' Center Thru Hole, Variable Speed Rotation, Powered Gear Tilt, Pace Master Drive Controller, Hand Pendant and Foot Pedal Controllers, 460 Volt Input.

Used WeldWire 20-Ton Tank Turning Rolls, Model: WWRD-20 / WWRI-20, 3 Tire Designed, 40,000lb Capacity ( 1 Driver & 1 Idler ), 6'' - 13ft Diameter Range, 3 Tire Design, 13 1/2'' Face Width, 0 - 45 IPM Variable Speed Range, 120 Volt Input, Hand Pendant Controller, 90 Day Warranty.

New Pandjiris 1,500 lb Positioner, New Positioner: Model 15-4 AB 1,500 Pound Capacity @ 4’’ C.O.G. Variable Speed |.08 – 1.60 RPM Powered Gear Tilt | 0 – 135 Degrees Adjustable Height Base | 26’’ – 38’’ (Center of Table to Floor) 24’’ x 24’’ ...more

Used WeldWire 120-Ton Tank Turning Rolls, Model: WWRD-120 / WWRI-120, 240,000lb Capacity, (Extra Idler Available), 8'' - 18ft Diameter Range, 3 Tire Style - 24'' Face, 1.2 - 38 IPM Variable Speed Range, 460 Volt Input, Hand Pendant Controller, 90 Day Warranty.

Used Pandjiris 4,500lb Welding Positioner, Model: 45-12AB, 4,500lb Capacity @ 12'' COG, Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 600A Copper Welding Ground, 460 Volt Input, Hand Pendant Controller, Foot Pedal Controller, 90 Day Warranty, Gripper Chucks available, Available for Sale ...more

New Koike Aronson 24,000lb Positioner with Gripper Chuck, Positioner: Koike Aronson, Model: HD240VF, 2023 Year Model, 24,000 lb Capacity @ 12'' COG 54'' x 54'' Table 0 - 135* of Tilt 0.012 -.60 RPM Variable Speed Range 2,000A Welding Ground Adjutable Height 460 Volt Input Hand Pendant ...more

New Koike Aronson 1,500lb Welding Positioner, Model: MD-15, 1,500lb Capacity @ 4'' C.O.G. Powered Gear Tilt Variable Speed Rotation Height Adjustable Base 24'' x 24'' Square Table 600A Welding Ground 120 Volt Input, Includes: Hand Pendant Controller Forward / Reverse Foot Pedal 2 Year ...more

SERIAL. 11411, MODEL. WWRD-20, DRIVE ROLLS. 1, CAPACITY. 20,000 LBS PER UNIT, OVERALL CAPACITY. 80,000 LBS, TANK DIAMETER. 6" TO 13', MOTOR. 1.5 HP, IDLER ROLLS. 3, SERIAL. 12424, MODEL. WWRI-20, CAPACITY. 20,000 LBS EACH.

Used Weld Wire 10-Ton Turning Rolls, Model: WWRD-10 / WWRI-10, 20,000 Pound Capacity ( 1 Driver & 1 Idler ) 6'' - 13 ft Diameter Range 12'' Rubber Tires 3/4 Horsepower Motor (Variable Speed) 45 I.P.M. Max Speed 120 Volt InputHand Pendant Controller, 90 Day Warranty, Available for Purchase, We also ...more

Used Ransome 220,000lb Welding Positioner, Model: 2200P, Serial: 6526968, 220,000 Pound Capacity @ 12'' C.O.G., 6,738,000 Inch Pounds of Tilt Torque, 2,640,000 Inch Pounds of Rotation Torque, 115'' Center of Table to Floor, 120'' x 120'' Table, Variable Speed Rotation, 96'' x ...more

Used Pandjiris 4,500lb Positioner with Gripper Chuck, Positioner: Used Pandjiris, Model: 45-12 AB, 4,500 Pound Capacity, 48'' x 48'' Table, Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 600A Copper Ground, 480 Volt Input, Hand Pendant and Foot Pedal Controller, 90 Day Warranty ...more

Used Pandjiris 30-Ton Turning Rolls, Model: MM-30/15-T, 60,000 Pound Capacity, 12'' - 16ft Diameter Range, 1.7 - 50.2 I.P.M. Variable Speed Range, 2 HP Drive Motor, 10'' Wheel Face, 460 Volt Input, Hand Pendant Controller, 90 Day Warranty.

Used WeldWire 6,000lb Welding Positioner, Model: WPT-60FB, Serial: 1086346, 6,000lb Capacity, 51'' Round Table w/ 7'' Complete Thru-Hole, Variable Speed Rotation, Powered Gear Tilt, Fixed Base, 460 Volt Input, Hand Pendant Controller, 30 Day Warranty.