Buy or Sell Your Cat 3516 Generators

Danfoss VLT 3500 Type 3516 Adjustable Frequency Drive 175H7351 15HP STK 801A30 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY) AUTHENTICITY GUARANTEED! WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.

, used Fitzpatrick Fitzmill Mdl. DAS06 Hammer / Knife mill. Stainless Steel. Pan Feed. Driven by 7.5 HP, 230/460 volt, 1740 rpm Explosion Proof (XP) motor. On stainless steel cart with wheels. S/N 10321. Video of unit running available., FITZPATRICK Fitzmill DAS06, TYPE. HAMMER MILL, Material. 316 STAINLESS STEEL.

Used Vertical machining center with 50" X, 20" Y, 25" Z travel. s 30 hp, 12,000 RPM, 24 ATC, CAT 40 taper, Haas control, and more. a coolant system, chip auger, and full enclosure., 2003 HAAS VF-4SS, X. 50", Y. 20", Z. 25", Power. 30 hp, RPM. 12,000 RPM, # ATC. 24, Taper. CAT 40, Table-W. 18", Table-L. 52", # Axis. 3 ...more

6500# ELECTRIC PNEUMATIC 80V, 185/86 TRIPLEX MAST, 2 ADDTL HYD FNCTS, DUO PILOT, MAST CUSHIONING, SWIVEL SEAT, HIGH PERFORMANCE PACKAGE, REAR GRAB BAR W/ HORN BUTTON, ENSOL LITHIUM-ION BATTERY, 42" FORKS, FILE PHOTO REFLECTING APPEARANCE OF THIS UNIT. FORKLIFT IS CURRENTLY UNGERGOING RECONDITIONING.

Used Vertical Machining Center. s 51.1" x 25.6" x 24.2" XYZ travel, 25 hp, 12,000 RPM, CAT 40 taper, 36 ATC, and Fanuc 0i-MF Control. Includes chip conveyor, high-speed machining, and coolant through spindle., Table Size: 55.12 x 31.50, Rapid Traverse: 1,181 IPM (590 IPM programmable), Power: 220V, 3PH.

Used vertical machining center with 64" X, 32" Y, 30" Z travel, 30 hp, 8100 RPM, CAT 40 taper. s 4-axis, 20 ATC, through-spindle coolant, Haas HRT-310 rotary table, side-mount tool changer, Ethernet interface, and chip auger., 2014 HAAS VF-6/40, X. 64", Y. 32", Z. 30", Power. 30 hp, RPM. 8,100 RPM, # ATC. 20, Taper. ...more

12,000# LP CUSHION,4 SECTION VALVE,189/92.5" TRIPLEX MAST, HANG ON SIDESHIFTER, DUAL FNCT HOSING,48" FORKS REAR GRAB BAR W/ HORN, STEERING WHEEL KNOB,UNDERBELLY SCREEN, DUAL ELEMENT AIR CLEANERREAR VIEW MIRROR KIT, REAR LED WORKLIGHT.

6011 CD 4/20/26, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AXLES, AUTO/AUTO, ED, AOC, BKTA GP AB 132" 7.00YD3 PO, CAB TRIM, DELUXE (LHD), COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CPM PAYLOAD SOFTWARE, Engine, FAN, STANDARD, FENDERS, BASIC +, FILTRATION, STANDARD, FUEL ANTIFREEZE, -25C (-13F) ...more

**ATTACHMENTS PICTURED ARE, *306 07A CR MINI EXCAVATOR, *BOOM, SWING, *COVER GP, *DRAIN, ECOLOGY, *ELECTRICAL ARR, C2.4 HRC, *ENGINE, EPA TIER 4 FINAL, *FILM, COUPLER, ISO, *LIGHTS, LED, *PLUG GP, *SOFTWARE, 2 WAY CONTROL, *SOFTWARE, CODED START, *SOFTWARE, PROPORTIONAL CONTROL, *SOFTWARE, STICK STEER CONTROL, *TRAVEL ...more

Used Horizontal Machining Center with X: 66.9", Y: 55.1", Z: 55.1", 50 hp, 7,000 RPM, 120 ATC, CAT 50 Taper, 39.3" pallets, and 4-axis capability., 2002 MAZAK MAZATECH FH-8800, X. 51", Y. 43", Z. 39.3", Power. 40 hp, RPM. 7,000 RPM, # ATC. 120, Pallet-W. 31.4", Pallet-L. 31.4", # Axis. 4, Control. CNC (Mazatrol PC ...more

Cab with Heat and Air Conditioning, Cab Refresh, New Seat, Rear Counterweight, 6.25Yard PinOn Tooth Bucket, Aggregate Counterweight, 26.5R25 Tires, Full CPT+H Overhaul All Powertrain and Hydraulic Components Rebuilt or Replaced with CAT Reman, Loader Frame and Linkage Overhaul, Manual Front Differential Lock, 2Valve ...more

Used Vertical Machining Center. s a 3-axis system, 40" x 26" x 25" capacity, 30 hp, 10,000 RPM, 24-tool ATC, CAT 40 taper, Haas control, coolant system, chip auger, full enclosure, vises, and tool holders., 2004 HAAS VM-3, X. 40", Y. 26", Z. 25", Power. 30 hp, RPM. 10,000 RPM, # ATC. 24, Taper. CAT 40, Table-W. 25" ...more

5 LB FIRE EXTINGUISHER, BATTERY,EXTRA HEAVY DUTY, DISC, BUCKET-GP, 86", BOCE, CAB PACKAGE, ULTRA, CERTIFICATION ARR, P65, COUNTERWEIGHT,MACHINE,EXTERNAL, DOOR, CAB, POLYCARBONATE, FILM, RIDE CONTROL, ANSI, FILM, SELF LEVEL, ANSI, HEATER, ENGINE COOLANT, 120V, INSTRUCTIONS, ANSI, USA, LANE 3 ORDER, MOUNTING, FIRE ...more

2300 IPMCAT 40120 - EXPANDABLE TO 36016"20,000.

Horizontal mMachining center offers 28.74" X/Y travel, 31.5" Z travel, and a powerful 40 hp spindle reaching 18,000 RPM. s an 80-tool ATC, CAT 40 taper, Mazatrol Smooth G control, and chip management systems., Pallet Size (Millimeters)500, Pallet Size 19.68" x 19.68", X-Axis Travel 28.74", Y-Axis Travel 28.74", Z-Axis ...more

Used vertical machining center. s: 40.94"x21.06"x21.06" XYZ travel, 20 hp power, 8,000 RPM spindle, CAT 40 taper, 20-tool ATC. Includes Fanuc CNC control and standard coolant system., 2016 GANESH VMC-4020, X. 40.94", Y. 21.06", Z. 21.06", Power. 20 hp, RPM. 8,000 RPM, # ATC. 20, Taper. CAT 40, Table-W. 43.31" ...more

226D3 SKID STEER LOADER, AXLES, STANDARD, BATTERY,HD,DISCONNECT, 850 CCA, CAB PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, CONTROL, ISO, PROP, WT, DISPLAY, ADVANCED, LCD, CAMERA, DOOR, CAB, GLASS, FAN, COOLING, DEMAND, FILM, TWO SPEED, HEATER, ENGINE BLOCK, 120V, HYDRAULIC OIL, STANDARD, HYDRAULICS, PERFORMANCE (H2) ...more

Vertical Machining Center, used, s 24" X, 14" Y, 18.1" Z travel, 9.3 hp, 10,000 RPM, 16-tool ATC, CAT-40 taper, 28" x 13.8" table, 3-axis, and FANUC CNC control., 2016 SHARP SV-2414, X. 24", Y. 14", Z. 18.1", Power. 9.3 hp, RPM. 10,000 RPM, # ATC. 16, Taper. CAT-40, Table-W. 28", Table-L. 13.8", # Axis. 3, Control. ...more

Unused Vector 46" Wurster insert, 316 stainless steel construction, (6) approximately 9" diameter x 30" high Wurster tubes with cart, serial# HCT-7722-2.

10" Ellicott Dragon, Approx. 40' Working Depth, 60' Floatation Flame Pontoons, CAT 3406 Engine, 2x Fuel Tanks (~1000 Gal. Total Capacity), Original 3 Vane Impeller Converted to 4 Vane for Enhanced Pumping, Spare Rock Box, JD 6090 Pump 10".

Brand: SULZER, Condition: USED, "AS-IS", Model: 10 x 10 IR, Type: MULTISTAGE CENTRIFUGAL PUMP, Serial: -, Power Rating: 3560 RPM, Weight: 2,572 LBS. W/ PALLET, Category: PUMPS, ERC #: MO-3998, Job #: 091, Shipping Dimensions: 64" x 50" x 59", Additional Notes: STAGE 1,TOP CAST HOUSING: 316 SS, BOTTOM CAST HOUSING: 304 ...more

Explore precision with the 2007 MORI SEIKI NH4000 DCG, a horizontal machining center featuring 4 axes, 14,000 RPM, and 30 hp. Fanuc MSX-701 III, chip conveyor, chiller, and high-pressure coolant., 2007 MORI SEIKI NH4000 DCG, X. 22", Y. 22", Z. 24", Power. 30 hp, RPM. 14,000 RPM, # ATC. 60, Taper. CAT 40, Pallet-W. ...more

3500# LP CUSHION, 188/83 TRIPLEX, 48" FORKS, INTEGRAL S/S, DRAWBAR PIN, SGL FNCT HOSING, PREMIUM LED WORK LIGHTS, AMBER STROBE - ABOVE OHG,LP TANK, FILE PHOTO REFLECTING APPREARANCE OF THIS UNIT. FORKLIFT IS CURRENTLY UNGERGOING RECONDITIONING, Tire Type - Cushion.

Haas VF-0 VMC available now!, Located at our warehouse in Preston Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews ...more

Used Horizontal Machining Center with 64"X, 50"Y, and 32"Z travels. Offers 30 hp, 7,500 RPM, CAT 50 taper, 50 ATC, and 4-axis capability., 2006 HAAS EC-1600, X. 64", Y. 50", Z. 32", Power. 30 hp, RPM. 7,500 RPM, # ATC. 50, Taper. CAT 50, Pallet-W. 36", Pallet-L. 64", # Axis. 4, Control. CNC (HAAS), Dimensions. 194" x ...more

ALARM, BACK-UP, STANDARD, CAB, ENCLOSED, HEAT + A/C, CLIMATE PACK, STD, SGL BATTERY, COUPLER, MANUAL, IT, ENGINE 83 KW, FENDERS, SINGLE, FRAME, STABILIZER, NONE, HEATER, ENGINE BLOCK, 120V, INSTRUCTIONS, ANSI, LANE 3 ORDER, LEVER, MANUAL, FNR/WIPERS/IND, LOAD CHART, ANSI, STANDARD, MANUAL, O&M, ENGLISH, MONITOR, NONE ...more

Used Vertical Machining Center available. s 23.6" x, 17.7" y, 19.7" z travels, 20 hp, 8,000 RPM, 24 ATC, CAT 40 taper. Includes Fanuc 0i-MF Plus control and coolant tank., 2022 SMART MACHINE TOOL SV 1, X. 23.6", Y. 17.7", Z. 19.7", Power. 20 hp, RPM. 8,000 RPM, # ATC. 24, Taper. CAT 40, Table-W. 29.5", Table-L. 17.7" ...more

**RED TAG SPECIAL** - FOLEY INSPECTED - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE., 335F L CR HEX EU, 335F L CR STANDARD ARRANGEMENT, 335F L HEX, BOOM, REACH 20'3" HD, CAMERA, REAR, CE MARK CERTIFICATE AND PLATE, CIRCUIT, MEDIUM, CLEAN EMISSIONS MODULE, CONTROL, FINE ...more

Used Vertical Machining Center, HRT210. s 30 hp, 8,100 RPM, 4-Axis, 40"x20"x25" travel, Haas NextGen CNC, Renishaw probing, high-speed machining, and 30 ATC side-mount tool changer., 2018 HAAS VF-3, X. 40", Y. 20", Z. 25", Power. 30 hp, RPM. 8,100 RPM, # ATC. 30, Taper. CAT 40, Table-W. 18", Table-L. 48", # Axis. 4 ...more

2007 CAT 3516C-HD S#SBK00296 Diesel Generator Set, 2500kW standby, 2250kW prime, 277/480V 3ph, 60HZ, 1800rpm, 690 original hours, EMCP3.3 digital control panel, Qty (1) 4000A and Qty (1) 3200A breakers, Electric start, 120VAC battery charger, 24VDC battery charging alternator, 24VDC battery set, CAT 3516C-HD diesel ...more

Make: Makino, Model: A51NX, Year: 2011, Machine Location: Upon Request, Pallet Size: 15.75″ x 15.75″ (400 mm), X-Axis Travel: 22″, Y-Axis Travel: 25.2″, Z-Axis Travel: 25.2″, B-Axis: Full 4th Axis Indexing, Spindle Speed: 14,000 RPM, Spindle Taper: CAT 40, Automatic Tool Changer: 133 ...more

6500# 80 VOLT SIT DOWN ELECTRIC,185/86 TRIPLEX, 47" FORKS, 2 ADDTL HYD FNCTS W/ QD'S, 4 SECTION VALVE,DUO PILOT, SWIVEL SEAT HIGH PERFORMANCE PACKAGE,REAR GRAB BAR W/ HORN, LED FRONT AND REAR LIGHTS, RED FLOOR SPOT LIGHT.

Notes. - FOLEY WORK READY - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, s (515,000 BTU / BURNER) 1,000,000 COMBINED BTU'S 16" DUCT FLANGE OUTLET / HEATER 2 5/16" BULLDOG HITCH DUCT STORAGE BOX FUEL CAPACITY - 175 GL HEATED AIR OUTPUT (CFM) 3,200 HEATER, CAT C1.5 T4F ENGINE ...more

Vertical Machining Center, used, featuring a 59" × 26" table, 8,000 RPM, and 24 ATC. Hurco WinMax CNC, chip conveyor, CAT 50 taper. Ideal for heavy-duty tasks with 24 hp power and 3,000 lbs table capacity., Table Size: 59 × 26, Table Capacity: 3,000 lbs, X-Axis Rapid Traverse Rate: 1,181 IPM, Y-Axis Rapid ...more

2011 MAZAK VTC-250/50, X. 60", Y. 25", Z. 25.9", Power. 20 hp, RPM. 6,000 RPM, # ATC. 24, Taper. Cat 50, Table-W. 73", Table-L. 25", # Axis. 3, Control. CNC (Mazatrol Fusion).

Notes. - FOLEY WORK READY - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, s (515,000 BTU / BURNER) 1,000,000 COMBINED BTU'S 16" DUCT FLANGE OUTLET / HEATER 2 5/16" BULLDOG HITCH DUCT STORAGE BOX FUEL CAPACITY - 175 GL HEATED AIR OUTPUT (CFM) 3,200 HEATER, CAT C1.5 T4F ENGINE ...more

Notes. - FOLEY WORK READY - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, s (515,000 BTU / BURNER) 1,000,000 COMBINED BTU'S 16" DUCT FLANGE OUTLET / HEATER 2 5/16" BULLDOG HITCH DUCT STORAGE BOX FUEL CAPACITY - 175 GL HEATED AIR OUTPUT (CFM) 3,200 HEATER, CAT C1.5 T4F ENGINE ...more

5000# LP PNEUMATIC, 4 SECTION VALVE, 188/84.5 TRIPLEX MAST, HANG ON SIDESHIFT, DUAL FNCT HOSING, 48 '' FORKS, REAR GRAB HANDLE W/ HORN,STEERING WHEEL KNOB, RADIATOR SCREEN, FILE PHOTO REFLECTING APPEARANCE OF THIS UNIT. FORKLIFT IS CURRENTLY UNGERGOING RECONDITIONING.

2024 Doosan NHP 4000 Horizontal Machining Center: Used, with a 22"x25.2"x26" travel range, 40.2 hp, 15,000 RPM, CAT 40 taper, and a 60-tool ATC. Comes with 2 tombstones, a chip conveyor, and a mist collector., 2024 DOOSAN NHP 4000, X. 22", Y. 25.2", Z. 26", Power. 40.2 hp, RPM. 15,000 RPM, # ATC. 60, Taper. CAT 40 ...more

Vertical Machining Center, used, s 41.33" X, 22.44" Y, 18.11" Z, 49.6 hp, 15,000 RPM, 40 ATC, CAT 40 taper, Fanuc Oi-P Control, LNS Turbo Chip Conveyor, Renishaw probes, and spindle calibration. I, 2023 DOOSAN BVM 5700, X. 41.33", Y. 22.44", Z. 18.11", Power. 49.6 hp, RPM. 15,000 RPM, # ATC. 40, Taper. CAT 40 ...more

Used Vertical machining center with high-speed 20,000 RPM spindle, CAT 40 taper, and 15 HP motor. G-Tech 31i control, Renishaw NC-4 laser probe, and 60 ATC. Includes advanced 5th axis trunnion table and precision s., X-Axis Travel 24.8", Y-Axis Travel 22.04", Z-Axis Travel 20.07", Spindle Speed 20,000 RPM, Spindle ...more

American Canco Model 006, automatic, single head, atmospheric, can seamer rated from 5 to 45 containers per minute – depending on materials, application and machine configuration. Can size range: 202 to 404 in Diameter x 214 to 510 in Height (with proper change parts). (4) roll, double seam, single seaming head ...more

*2 WAY CONTROL, *303 07A CR HYD EXCAVATOR, *ACCUMULATOR, *ALARM, TRAVEL, *BLADE, FIXED, BOCE, *BOOM LIGHT, LED, *BOOM, STANDARD, *CAB, WITH HEAT AND A/C, *CAT KEY, WITH PASS CODE OPTION, *CONTROL, 1ST AUX, JOYSTICK, *CWT EXTRA, 550LBS, *DRAIN, ECOLOGY, *ENGINE, MLIT STP3/EPA TIER 4F, *FILM, CAB A/C, *FILM, INC. ...more

NEW Caterpillar Model C15 Package Diesel Generator Set, EPA Standby, 277/480V or Change to 120/208V, EMCP 4.2 Generator Control Panel, Auto Start/Stop, Engine Safety Shutdowns, CAT LC7024J Permanent Magnet Generator, 12 Lead 105 Degree C with Space Heater, 2 x 800A LSI, 1 x 250A LSI Circuit Breakers, Electronic ...more

*326F L HEX, *AIR CLEANER, STANDARD, *ALARM, TRAVEL, *CAB-ROPS,70/30,W/VANDAL-G BOSS, *CAMERA, REAR VIEW, MIRRORS RH, *CHANGER,HAND CTRL 2-WAY (ANSI), *CIRCUIT, COMBINED, STP PKG, *COLD WEATHER PKG READY, *CONTROL, FINE SWING, *COUNTERWEIGHT, 8,820LBS, *COUPLER LINES, REACH BOOM, *COVER, FENDER, *CTRL, CAT PIN GRABBER ...more

Used Hitachi Seiki HS530. This pre-owned Horizontal Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Hitachi Seiki Horizontal Machining Center we can review machine. To request a quote, inquire about rigging and trucking ...more

Key & s, 299d3 Enclosed Cab, Engine: Cat C3.8 DIT Turbo Diesel – 95 HP, Operating Weight: 11,464 lb, Rated Operating Capacity (35%): 3,480 lb, Tipping Load: 9,945 lb, Hydraulic System: Standard Flow (High Flow optional), Cab: Fully Enclosed • Air Conditioning • Heater • Radio • Excellent ...more

12,000# DIESEL PNEUMATIC, 4 SECTION VALVE, 180/122 SIMPLEX MAST,DUAL FNCT HOSING,71" HANG ON SIDESHIFT, 48" FORKS,STEERING WHEEL KNOB, REAR GRAB BAR W/ HORN,ELEVATED AIR W/ PRECLEANER, UNDERBELLY SCREEN, SOLID DUAL DRIVES SOLID STEERS, FILE PHOTO REFLECTING APPEARANCE OF THIS UNIT. FORKLIFT IS CURRENTLY UNGERGOING ...more