Buy or Sell Your Briquetters

Used Komarek Greaves Briquetting Press, approx. 50 HP, Heavy-duty industrial briquetting press manufactured by Komarek Greaves, suitable for compacting a wide range of powders and fines into uniform briquettes., This unit is a segmented pocket roll design, allowing individual pocket replacement and easier maintenance. ...more

12" x 6" x 6" Approximate Brick, 72" x 30" x 19" Approximate Box, Approximate :, - Motor: 30 HP, 3-phase, 60 Hz, 220/440 V (some units 230/460 V), - Hydraulics: Vickers pump, - Cylinders: Main 8" bore; 2nd compression 9" bore; cover 4" bore, - Compression forces: 1st ~60 tons; 2nd ~76 tons; cover door ~15 tons, - ...more

6" Diameter Briquette, 16" Main Cylinder Bore, Price Includes Ram Assist Option, Approximate Capacities Per Manufacturer's :, Aluminum: 4000 lbs/hr., Steel/Cast Iron: 8000 lbs/hr., Copper or Brass: 10,500 lbs/hr., Available Total Force: 503 tons., Maximum Pump Pressure: 5,000 psi., Maximum Face Pressure: 35,600 ...more

Puckmaster LT120 Hydraulic Briquetting Press Machine with Shread Master, and Chip Conveyor, Fully Rebuilt in 2021 by Neff Press, (Cutting fluid tubs and chip hopper not included), Puckmaster LT120 Hydraulic Briquetting Press Machine with Shread Master, and Chip Conveyor, Fully Rebuilt in 2021 by Neff Press, (Cutting ...more

2" Dia x 2" Briquette, Dual 8" Main Press Cylinder Bore, Approx 285 LBS./ Hr (Nickel chip sample), Available Total Force: 126 tons., Maximum Pump Pressure: 5,000 psi., Maximum Face Pressure: 62,000 psi., 20HP 3/60/480V Volt Electric Motor, s:, Heavy-duty structural tubing frames., Allen Bradley™ PLCs with option ...more

Briquette Size: 3.5" x 3.5", Material Types: Aluminum, steel, cast iron, copper, brass, and others, Capacity (lbs/hr):, Aluminum: 1,000, Steel or Cast Iron: 2,000, Copper or Brass: 3,200, __________________________, Main Motor: 40 hp, Main Cylinder Bore: 10", Total Force Available: 196 tons, Power Requirements: 100 ...more

6" x 12" x Variable Bale Size, 21" x 32" x 48" Box Size, - Type: Dual Compression Baler (for non-ferrous, light steel clippings, and fluffy scrap), - Mounting: Skid-mounted, fully self-contained, - Operation: Hydraulic; automatic compression and ejection cycle, - Bale Ejection: Side ejection for easy discharge, - ...more

5" Dia x 2-1/2" Thick Brick, Model 350-15, 24" Dia Power Cylinder * 2-1/2 Cubic Yard Infeed Hopper With Stand, (2) Hydraulic Pumps * 320 Gallons Of Oil Required * 12 Strokes Per Minute, 452 Square Inch Area Power Cylinder * 1550 PSI * 350 Ton Piston Load, Weight Of Briquetter And Tons Per Hour - Varies With Weight And ...more

USED FOR THE RECOVERY OF FLUIDS FOR COMPACTION OF SWARF (SLUDGE), SERIAL. 192.50/01, MODEL. HE-300-30, YEAR. 1998, MATERIAL PRESS CAPACITY. 660 TO 880 LBS PER HOUR (300-400 KG), WEIGHT OF BRIQUETTES. 1.7 TO 3 LBS (08-1.4 KG), CURRENT SLUG DIAMETER. 2-1/2", PLC OPERATED. ALLEN- BRADLEY SLC-500.

Prodeco USA E60 Standard Briquette Press Machine, This unit was used for approx 2-years by a meticulous customer and in was installed under cover. This unit does not have an automatic sizing like the SUPER unit, so if the density of the material changes the briquettes will not be uniform length unless a simple manual ...more

CF Nielsen BP6510 HD Automatic Briquette Press, (2) Lines available, Infeed system for both units, Reported to have less than 100 hours of operation.

Electrical Requirements, 460 V, 3 Phase, 60 Cycle, 40 HP Electric Motor, Average Output Brick Size: 3.5" or 5" diameter x variable length up to 4", Machine Dimensions: 118" x 68" x, Weight: 14,000 lbs, HMI Control: Included, PLC: Included, Capacity:, Aluminum Chips: Up to 1,000 lbs/Hour (5"), Copper Chips: Up to 2,200 ...more

used- ferro tech roll compactor. model wp-30-5-5. (2) 12" diameter x 5" wide rolls, horizontal axis, stacked vertically, twin cigar-shaped roll face (~3/4" wide x 21/4" long). rolls compressed by a top mounted hydraulic cylinder, local hydraulic hand pump controlled. rolls driven through a hansen gear reducer by a 20 ...more

WEIMA C 150 Briquette Press & s: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). : -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the ...more

WEIMA TH 1500 M Briquette Press (Square Brick): -- Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd (1.88 cbm). -- : -- 40 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator motor; hydraulic oil volume of 264 gallons (1,000 ...more

UMP BP500A Briquette Press, New System - Ready to ship!.

Nice CF Nielson BP5500 Press. The plant shut down in 2014. The machine was run again for a test in 2016 and everything was in good working condition. They have the dies and pistons to make round and octogonal logs. - Briquetting press CF Nielsen BP5500 - Dies to make 3″ round logs and 2½″ octogonal ...more

WEIMA TH 814 Briquetter A volume reduction of 90% is possible through the briquetting of wood, paper, aluminum and biomass or synthetics, providing significant savings in labor, disposal and storage costs.Material is hand fed or by dust system into the hopper, where an agitator pulls it into the auger and pressing ...more

used-universal milling technology pellet mill; model c165; 6 to 1 reduction gear box; 250 hp moto; center feeder on door with motor and reducer; 8 roller assemblies(4 sets); conditioner; produces up to 4 tons per hour of alfalfa or grassy material; year 1998.

System includes:, - Buhler Pellet Mill: 500 HP, - Mill Pellet Cooler, - Sedberry 125 HP Hammermill, - Superbin Bag Filter with Sealer, - 12" x 20' Screw Conveyor, - 12" x 25' Screw Conveyor, - Sawdust Dump Bin and conveyor to pellet mill, Superbin Bag Filler Station, - MILL-BIN includes bagging mount, level ...more

Inventory No. 0320-200-0001 Manufacturer California Model No. CL Name California Cl Pellet Mill Arrival Date 10-21-2020 Dimensions L x W x H (inches) Unavailable Capacity 1/4 HP Electrical 460 V Weight (lb.) 500 Category Fabrication Condition Used Available Quantity 1 Serial No. SP6 387861 Item Used California Pellet ...more

Two California Pellet Mills in package, First mill is 300 HP, Second mill is 400 HP, Inlcudes: Dual Feed Auger, Conveyors, Controls, Spare parts.

CMS is excited to represent EHW Italia in North America. EHW produces a wide range of pellet manufacturing equipment, allowing us to engineer a complete line based on your application and needs., - Loading hoppers and storage bins, - Hammermills, - Sawdust drying lines - Belt Dryers, - Storage bins/silos/conveyors, - ...more

NOVA PELLET - N-Eco - 45 kW,.Pellet Mill Low specific energy consumption per ton of pellet.: -- Capacity: 770 - 1,200 Lbs/Hr (350 - 550 kG/Hr) depending on the raw material. -- Main drive: 60 HP (45 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings: 0.02" ...more

NOVA PELLET - N-Plus - 165 kW,.Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 2.2 - 2.8 Tons/Hr (2.0 - 2.5 metric tons/Hr) depending on the raw material. -- Main drive: 215 HP (160 kW). -- Pellet dimensions: 0.24" (6 mm) Diameter. -- Raw Material: Wood chips, sawdust, wood shavings; ...more

PELLET COMPANY EQUIPMENT - Everything has already been dismantled and loaded into trailers. They are ready to ship! Selling as one lot. Owner will not separate., Pellet Company & Equipment, - (2) Bagging line – CableVey system for dust free environment, - Auto Sealer for bagging, - Bagging System with ...more

Brand New Systems, Law-Marot-Milpro Complete Cooler Systems (4 coolers available), New, complete with air system (Cyclones/ducting/Fan/Airlock/Auger)., These units are ready to be loaded.

The 3MT PSM 200 is a mid-range pellet mill feeding system built for vertical ring die pellet mills requiring higher throughput and greater material buffering capacity. Delivers consistent, controlled feed rates with a large surge hopper that absorbs upstream fluctuations and maintains stable mill loading. Custom built ...more

Make: CME, Model: MILL-3, Year: 1900, Machine Location: Nevada, Equipment Overview, This offering is a turnkey Colorado Mill Equipment (CME) pellet milling and hammermill system, including the CME MILL-3 Pellet Mill, CME HMS-VB-HT-3 Hammermill, and CME ECO-3. CME is a recognized US manufacturer of industrial feed ...more

(2) Units - One Without Motors., (1) LOT - Spare Dies and Rolls., (1) Cooling Fan., --- Factory ---, Motor and Drive:, * Main Drive Configuration: Dual-motor synchronous drive system, * Motor Power: 2 x 75 kW to 2 x 110 kW (approx. 200 - 300 HP combined), * Transmission Type: High-torque V-belt drive, * Die Linear ...more

California Pellet Mill, Model CL, Laboratory size pellet Mill. Ring die size7-1/" OD X 5" ID, roller shell OD: 3-3/8", Capacity: 30 to 200 pounds per hour, Pellet Size: 3/16" diameter, 17" long X 13" wide X 17" deep product hopper, 4" wide x 20" long vibratory feeder, 36" long x 4" OD continuous paddle mixer and ...more

NovaPellet N-Pico pellet mill Designed for the Smaller Plants using Dry MaterialsOperating System: Mechanical and electric, with manual adjustment of pressure rollers for perfect positioning on the compression die. --Loading and Dosing: Material loaded through a hopper with adjustable manual shutter (optional) ...more