ADM Industries Inc
Owensboro, KY 42301-8733
Surplus Record Dealer Since 2026
Contact
Claud Day
6 listings in 4 categories
Precision and Second Operation Lathes
1 Result
12.5" x 20" Monarch #10EE, Precision Toolmaker's Lathe - Clean, Running
Category: Precision and Second Operation Lathes
Seller: ADM Industries Inc
Location: Owensboro, KY
Mfr: Monarch
Model: 10EE
Year: 1955
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
6" x 12" Harig #612, manual surface grinder, Walker Ceramax permanent chuck
Seller: ADM Industries Inc
Location: Owensboro, KY, KY
Mfr: Harig
Model: 612
Manufacturer: Harig, Model: 612, Capacity: 6" x 12" Clean Harig 612 manual surface grinder in good working order. Machine has been well maintained and shows very good overall condition. a Walker Ceramax permanent magnetic chuck and work lamp. s & Equipment: 6" x 12" table Walker Ceramax fine‑line permanent ...more
10" x 24" Gallmeyer & Livingston #360, Hydraulic Surface Grinder, electromagnetic chuck, rebuilt valve
Seller: ADM Industries Inc
Location: Owensboro, KY, KY
Mfr: Gallmeyer & Livingston
Model: 360
Year: 1981
Gallmeyer & Livingston Model 360 hydraulic surface grinder in good working condition. The main hydraulic valve assembly has been recently rebuilt, resulting in smooth, consistent table travel with no sticking or hesitation. Grinder runs properly in all feed directions and is ready for use. Well‑built American ...more
9" Hardinge #HSL59, SuperPrecision Speed Lathe, On Base
Category: Speed Lathes
Seller: ADM Industries Inc
Location: Owensboro, KY
Mfr: Hardinge
Model: HSL-59
Manufacturer: Hardinge Brothers, Model: HSL‑59, Swing: 9", Collet Capacity: 5C Hardinge HSL‑59 super‑precision manual speed lathe in good operating condition. Machine is mounted on base and has been well maintained. Ideal for second‑operation work, precision turning, and toolroom applications. & s: 9" ...more
Cress C1228DW/SD4 Electric Draw / Temper Furnace - 230V 3Phase - Excellent Condition
Category: Tempering Furnaces
Seller: ADM Industries Inc
Location: Owensboro, KY
Mfr: Cress
Used Cress electric draw furnace previously used for drawing back tool steel after heat treating. Unit is fully operational and in good condition. Heating elements and firebrick are intact, and the furnace heats and controls properly., This is a stand‑alone draw/temper furnace suitable for tool rooms, heat treat ...more
Cress C1232/935 Electric Heat Treat Furnace - 230V 3Ph - Works, Needs Coil & Brick Repair
Category: Tempering Furnaces
Seller: ADM Industries Inc
Location: Owensboro, KY
Mfr: Cress
Manufacturer: Cress Mfg. Co., Model: C1232/935, Serial: 0205, Type: Electric Heat Treat Furnace / Box Furnace Electrical: 230 VAC 3‑Phase Approx. 22 Amps :, Used Cress electric heat treat furnace previously used for tool steel heat treating. Unit powers on and is operational but heats slowly. Furnace will require ...more
