Buy or Sell Your G3516 Engines

MANUFACTURER: Caterpillar MODEL: G3516SITA CONDITION: Used RPM: 1200 Serial No: 3RC00973 Reference: UC1444 G3516 SITA 3RC00973; arr#9Y4112; blk#10101228; CAT CPU; CAT3161 Gov; Altronic Ign, Rust, and rough exterior to elements, internally look like it has had little time.

Available for sale, this 1994 Energy Industries FE650D-4 compressor package s a reciprocating design with a maximum horsepower of 1085. It includes a natural gas driver (Caterpillar G3516 TALE) and is advanced components such as Lights, Fire-Eye, Exhaust Fan, Catadyne Heaters, and a 3 Ton Crane. The unit has completed ...more

Generator Set Type: Stand-By Engine Model: G3516C Fuel Type: Natural Gas Voltage: 277/480 Model: G3516C Panel: with Autostart and Safety Shutdowns Batteries: Yes Frequency: 60 Cycles/Hz Phase: Three Phase, Notes, The engine has been completely rebuilt by Mustang Caterpillar and the engine will come with a 6-month ...more

EXCHANGE ENGINE, CAT G3516TA GAS 1200RPM, 11:1 compression, Came off a genset, S/N 4EK00067.

MANUFACTURER: Caterpillar MODEL: 310-1142 CONDITION: NEW Serial No: 296-0019; Reference: UO862 Radiator - D3516C, CAT model #310-1142Supplier# 422341, S#296-0019; NEW Surplus.

Peck Stow and Wilcox model G-352-F, serial no. M-3013, capacity 10-GA, overall 90 inch height x 92 inch length x 68 inch width.

FOR SALE: Low hour Caterpillar G3520C engine., Engine Serial # GZJ00689, Year: 2014, Hours: 4500 hours since new..

Item Number: 18513, Year: 2011, Manufacturer: Caterpillar, Fuel Type: Natural Gas, Model: G3520C, Serial Number: GZN, KW: 1950, Hz: 50, Voltage: 400, RPM: 1500, Hours: 0 Since New, More Information: (9) Brand NEW Caterpillar G3520C Industrial Generator Sets. Rated at 1950 kw / 2438 kVa continuous, 50hz, 1500 RPM, 400 ...more

Item Number: 10818, Year: 2008, Manufacturer: Caterpillar, Fuel Type: Natural Gas, Model: G3520C, Serial Number: GZN00723, KW: 2000, Hz: 50, Voltage: 3300, RPM: 1500, Hours: 0 Since New, Price: call for price, More Information: New Surplus Caterpillar G3520C Industrial Generator Set. Rated at 2000kw continuous / ...more

Item Number: 15940, Manufacturer: Caterpillar, Fuel Type: Landfill Gas, Model: G3520C, KW: 1600, Hz: 60, Voltage: 480, RPM: 1200, Hours: 0 Since New, Price: Call For Price, More Information: New Caterpillar G3520C Landfill Gas Generator Set. Rated at 1600kw continuous, 60hz, 480v, 1200rpm. Complete with Caterpillar ...more

Manufacturer: Caterpillar, Model: G3512, Condition: Core, HP: 1004HP@1400RPM, Serial # WPR00113, Arr# 2733067 Test Spec# OK7652 Year 2002.

Pre-owned Caterpillar G3512 Natural Gas Generator Set - Rated at 550KW, 60Hz, 480V, 1200RPM - Previously Set to Run on Digester Gas - Includes Remote Radiator, Freestanding Digital Control Panel - Open Skid Mounted - Approximately 19206 Hours, Price displayed is as-is. Unit can be rebuilt to 0 hours with warranty. ...more

Item Number: 15959, Manufacturer: Caterpillar, Fuel Type: Natural Gas, Model: G3512 TA, KW: 615, Hz: 60, Voltage: 480, RPM: 1200, Hours: 0 Since New, Price: Call For Price, More Information: Caterpillar G3512 TA Natural Gas Generator Set. Rated at 615kw, 60hz, 480v, 1200rpm. 0 hours since new. EMCP II+ Control Panel ...more

Hours: 89 Condition: Used Make: CAT Model: G3520 kW: 2050 Rating: Continuous Voltage: 277-480V Fuel: Natural Gas Make Year: 2013 Multiple Units Available: CAT Model G3520C Natural Gas Generator Set, LOW Emission (g/bhp-hr NOx): 0.5, Rated at 2050kW Continuous each 480V, 3Ph, 60Hz, 1800RPM, Enclosed in Fully walk-in ...more

Hours: 0 Condition: New Surplus Make: CAT Model: G3520C kW: 2600 Rating: Continuous Voltage: 347-600V Fuel: Natural Gas Make Year: 2023 New, Year 2022, CAT G3520C, 2600kW, 600V Open Skid Unit ,E2J Prefix.

Caterpillar / Olympian 35 kW standby (31.5 kW prime) propane generator set, model G35F3S, SN-NFS00242. Ford ESG642 engine rated 70 HP at 1800 RPM, SN-01-05-005300. /60/120/240V single phase. 150 Amp main-line circuit breaker. 4001E control panel. Coolant heater. No battery. Weather enclosure. 611 Hours. Year 2001. ...more

Hours: 0 Condition: New Make: CAT Model: G3520H kW: 2500 Rating: Continuous Voltage: 12470 Fuel: Natural Gas Make Year: 2023 New, Year 2023, CAT G3520H, 2500kW, 12.47kV Open Skid Unit with EMCP4.3 Controller, GFR Prefix.

Qty 2x CAT Model G3520H ,2469kW Continuous Rated, 4160V, 60Hz, 3-Ph Natural Gas Generator Set, Packaged in Weather Proof Walk-in Enclosure. C/W CAT EMCP4.3 Control Panel, Local Annunciator, Generator Space Heater, Get Temp Monitoring Package, Batteries & Rack, 100A, 120/208V House Panel, 20A Battery Charger ...more

TONNAGE 60 METRIC (66 US), STROKE 4.72, DIE HEIGHT 11.81, SLIDE ADJUSTMENT 2.95", BOLSTER 35.43" X 19.69", SPEED 35-90 SPM, MOTOR EDDY CURRENT 7.5 HP, WEIGHT APPROX 12,100 LBS, CONTROLS - NEW CIECO PPC1100R-4, - ALL NEW PRESS CONTROL WIRING.

SERIAL. S70550, MODEL. G1-60S, YEAR NEW. 1997, CAPACITY. 60 TON, AREA OF BED. 35.50" X 19.7", AREA OF T SLOTTED RAM. 19.70" X 14.2, STROKE. 4.728, SHUT HEIGHT (SDAU). 11.82, BOLSTER PLATE. 35.50 X 19.7" X 2", RAM ADJUSTMENT, MANUAL. 2.96", STROKES PER MINUTE (VARIABLE). 35 TO 90, AIR CLUTCH. YES, AIR COUNTERBALANCE. ...more

CANTEK - GT635ARD-16 25″ Double Surface Planer25″ Wide x 16″ thickness capacity Add on $1,250 for increase HP of top head to 30 HPs: -- Cutterheads are spiral insert types with six (6) rows of carbide inserts. -- (2) Driven and (1) idle bedroll for superior feeding of even difficult material. -- ...more

EXCHANGE ENGINE, CAT G3512SITA.

WATERBURY FARREL ZR16-8.5 SENDZIMR 12-HI ROLLING MILL, Mill Strip Width Max. 8.5" (216mm), Min strip width 4" (100mm), Max. Incoming Thickness.080" (2.0mm), Min. Out Finishing Thickness.0016" (0.040mm), Max. Tension 4,000 lb (1800 kg), Max. Mill Motor Power 50HP (37.5 Kw) 575 / 1175 RPM; 240V, Winder Power 40HP (30 ...more

TONNAGE 60 METRIC (66 US), STROKE 2.36", DIE HEIGHT 13", SLIDE ADJUSTMENT 2.95", BOLSTER 35.43" X 19.69", WEIGHT APPROX 12,100 LBS, CONTROLS - NEW CIECO PPC1100R-4 OR WINTRISS - WPC1000 CONTROL, - ALL NEW PRESS CONTROL WIRING, - ALL NEW MOTOR CONTROLS.

2012 Hardinge-Bridgeport GX 1600 Vertical Machining Center. s 62.99mm X, 27.55mm Y, 25mm Z, 25 kW power, 6000 RPM, 30 ATC, CAT 50 taper. Fanuc 0i-MD CNC, dual chillers, chip conveyor, and coolant system. Used condition., 2012 HARDINGE-BRIDGEPORT GX 1600, X. 62.99 mm, Y. 27.55 mm, Z. 25 mm, Power. 25 kW, RPM. 6,000 ...more

HARDINGE BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER, Fanuc 0i-MD CNC Control, 67" x 27.6" Table, X=63", Y=27.5", Z=25", 50 Taper, 6000 Max Spindle RPM, 30 ATC, TSC, Chip Conveyor, New 2012., 2012 Hardinge-Bridgeport GX 1600, Fanuc 0i-MD CNC Control, (2) Chillers, Chip Conveyor & Coolant System., CNC Control. ...more

Brand/Model: Cornell GF16K : Used Cornell GF16K Centrifugal pump with the following s: • case material • Single stage • 16.44" impeller • 8" suction flange • 6" discharge flange • CCW Rotation • Weight • Pump Dims 44"Lx30"Wx24"H • Skid Dims ...more

Gold Cup, Model GFC-6, automatic, stainless steel intermittent motion, rotary cup filler and heat sealer. rated from 6 to 25 cups per minute – depending on materials, application, environment and machine configuration. Fill range: Fill range: 1/2 oz to 8 oz. Cup size up to: 4" Dia x 4-1/2" High, with ...more

Yama Seiki GV1600 Vertical Turning CenterTABLE DIAMETER: 1,600 MM (62.99 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, MAX. SWING DIAMETER: 2,000 MM (78.7 INCH), MAX. TURNING DIAMETER: 1,800 MM (70.8 INCH), MAX. TURNING HEIGHT: 1,300 MM (51.1 INCH), RAM STROKE (Z AXIS): 900MM (35.5 INCH), CROSS RAIL TRAVEL (W ...more

Used 16 KW Advantage Temperature Control Unit, G Series, model SKE-1635LE-NF, 230 volt, serial# 90726, built 2004.

Make: Loomis Laboratory, Model: 232 – 16 – DT – 60 x 350, Year: 2018, Machine Location: Upon Request, Press Tonnage: 0 – 165 kN, Ram Speed Forward: 10 mm/sec, Ram Speed Retract: 13.8 mm/sec, Extrusion Speed: 0 – 5.2 mm/sec, Material Cylinder Inner Diameter: 60 mm, Material Cylinder ...more

12 x 14 Okuma GP-35N CNC Cylindrical Grinder, Attached Hyd., Hyd. Tail Stock, Showa Automatic Lube System, SBS Balancer SB-4500, As Is, OKUMA GP-35N 2-AXIS CNC CYLINDRICAL GRINDER, S/N 0395 Year:1994, STANDARD, Distance between ...more