Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: May 14, 2026 at 8:38 PM
Industry: General Machinery & Equipment
Price: best offer
Model: S500XD1
Controller: CNC D00 (DA)
X/Y/Z axis travel: 500/400/300mm
Table size: 600X400mm
Max. load weight: 250kgs
Spindle speed: 10,000rpm
BT30/21ATC
RENISHAW tool measuring system
Oil mist collector
With YUKIWA A/C rotary table
Controller: CNC D00 (DA)
X/Y/Z axis travel: 500/400/300mm
Table size: 600X400mm
Max. load weight: 250kgs
Spindle speed: 10,000rpm
BT30/21ATC
RENISHAW tool measuring system
Oil mist collector
With YUKIWA A/C rotary table
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 8:00 PM
Industry: Other Electrical & Power Equipment
Price: $4,000 / 5 pieces lot
Description: I have 5 complete camera kits, These are high-end Bosch cameras that have never been taken out of the box. The factory seals are still on them.What’s included in each set:The Camera: A Bosch "Autodome" (Model: NDP-7512-Z30). It’s a 1080p high-def camera that can zoom in 30x and see very clearly in the dark. The Mount: A matching heavy-duty pole mount (Model: VG4-A-9541) so you can install it on a mast or pole right away.Condition: Everything is NEW.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 4:26 PM
Industry: Transformers
Price: best offer
Description: We are currently selling a lot of 40 Sunbelt Solomon 2500 kVA 13.8 to 480/277 transformers as well as 24 JCL 2500 kVA 13.8 to 415/240 transformers. See attached photos. Please submit bids
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 3:06 PM
Industry: General Machinery & Equipment
Description: Looking for a conveyor to move scrap tires. Can be anywhere from 30-48" in Width and 20-30' in length. Preferably horizontal not inclined.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 2:43 PM
Industry: Other Electrical & Power Equipment
Description: 600AMP OR 800AMP NEMA 3R PANEL 42CIR OR MORE. 480V OR 480/277. ANY MFG
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 2:16 PM
Industry: Transformers
3000 KVA THREE-PHASE, PDMT TRANSFORMER, 7620 VOLT PRIMARY,
480/277 VOLT SECONDARY WITH SPLIT TAPS
Please reach out to me if you have them in stock.
480/277 VOLT SECONDARY WITH SPLIT TAPS
Please reach out to me if you have them in stock.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:51 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:51 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:50 PM
Industry: General Machinery & Equipment
Description: Looking for 32mm Swiss both Citizen and Star and Tsugami
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:49 PM
Industry: General Machinery & Equipment
Capacity: 45mm
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:48 PM
Industry: General Machinery & Equipment
Description: Spinner MICROTURN 52 LTBS
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
AUTOMATION READY - MC0122
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Turning Di
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Turning Di
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:47 PM
Industry: General Machinery & Equipment
IEMCA SIR Loader
Knoll System
Equipped as pictured
Knoll System
Equipped as pictured
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:46 PM
Industry: General Machinery & Equipment
Description: We are interested in Swiss-type automatic lathe, Tornos make
8 to 10 machines required
8 to 10 machines required
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:40 PM
Industry: Circuit Breakers
Description: LOOKING FOR SIEMENS 15FSV750 1200A BREAKER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:34 PM
Industry: Circuit Breakers
Description: Quantity 1 C/H 50VCP-W350 style 3776A16G02 W.D. 691C386H44 3000 amp 125vdc charge/close and trip
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:06 PM
Industry: Other Electrical & Power Equipment
Budget: Up to $5,000
Description: I am looking for a bus duct with the connection elbows to go from my ABB 4000amp switchgear and tie into a PG&E transformer. The installation is in San Francisco. We don't have the transformer or switchgear placed yet, so I am flexible on the length from 3FT to 10FT.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 1:01 PM
Industry: Generators & Engines
Description: New, New Surplus, or RTO C15 ACERT engine. Must match MBN prefix and Arrangement 228-1093.
Specs: … [Read more...]
Specs: … [Read more...]
S/N Prefix: MBN
Arrangement: 228-1093
Spec: 0K5014
Power: 515HP @ 2100RPM
FLS/FTS: 81 / -108
Application: Truck/Industrial
Arrangement: 228-1093
Spec: 0K5014
Power: 515HP @ 2100RPM
FLS/FTS: 81 / -108
Application: Truck/Industrial
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 12:54 PM
Industry: General Machinery & Equipment
Price: $39,000
Description: Must Move, Still under power in Northern California.
For sale due to owner relocating to a new facility with new beam processing equipment. … [Read more...]
For sale due to owner relocating to a new facility with new beam processing equipment. … [Read more...]
We are open to any offers.
Material Handling Included:
Infeed rollers 75’
(4x) Infeed transfer total length 39’ 6”
Outfeed Rollers 61’
(3x) Outfeed transfer length 10’ 6”
Material Handling Included:
Infeed rollers 75’
(4x) Infeed transfer total length 39’ 6”
Outfeed Rollers 61’
(3x) Outfeed transfer length 10’ 6”
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 12:48 PM
Industry: General Machinery & Equipment
Description: WANTED: Used Dake or Comparable Model 3A Manual Floor Standing Arbor Press. Must be in good working condition.
Thank You, … [Read more...]
Thank You, … [Read more...]
Dan Strand
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 12:40 PM
Industry: General Machinery & Equipment
Description: 2-Axis Fanuc Controlled CNC Lathe near Cleveland, OH. 2" Bar Capacity.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 12:28 PM
Industry: Generators & Engines
Price: 31,500.00
Description: Standby Takeout, Fully Weather Enclosed, John Deere Model 6135HF485, 6- Cylinder, 13.5 Liter Diesel Engine, Generac Model MD400, EPA Emissions, Package Diesel Generator Set, 277/480V or Change to 120/208V, Premium Generator Control Panel, Auto Start/Stop, Engine Safety Shutdowns, 800A 3 Pole Circuit Breaker, Electronic Governor, Jacket Water Heater, 24V Starter, Battery Charging System, Standard Air Cleaner, Fuel Tank Base, Radiator, Exhaust Silencers.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:49 AM
Industry: Other Electrical & Power Equipment
Price: Best offer
Description: Phenolic MIL I 24768/14, Canvas CE Black sheets .875" × 36.50" × 59.25", 262 sheets, 105 pounds each on 13 skids 37” X 60”, surplus material, located in Elkhart, IN 46514, make offer, all or part.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:48 AM
Industry: General Machinery & Equipment
Price: Best offer
Description: Phenolic MIL I 24768/14, Canvas CE Black sheets .875" × 36.50" × 59.25", 262 sheets, 105 pounds each on 13 skids 37” X 60”, surplus material, located in Elkhart, IN 46514, make offer, all or part.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:24 AM
Industry: Generators & Engines
Rated 1000kw/1250kva, 277/480 Volts, 3ɸ, 60Hz
ON STOCK - READY TO GO
X UL 2200 Listed and Labeled
X Permanent Magnet Alternator w/ Strip Heater
X Cooling System, Unit Mounted Radiator
X Engine Jacket Water Heater, 6000-Watt, 208V
X Electronic Isochronous Governor
X Battery Charger, 20-Amp Auto Float/Equalize
X 24 Volt Engine Starting Batteries w/ Battery Rack, Cables
X Aluminum Sound Enclosure w/ Internally Mounted Silencer (75db(
ON STOCK - READY TO GO
X UL 2200 Listed and Labeled
X Permanent Magnet Alternator w/ Strip Heater
X Cooling System, Unit Mounted Radiator
X Engine Jacket Water Heater, 6000-Watt, 208V
X Electronic Isochronous Governor
X Battery Charger, 20-Amp Auto Float/Equalize
X 24 Volt Engine Starting Batteries w/ Battery Rack, Cables
X Aluminum Sound Enclosure w/ Internally Mounted Silencer (75db(
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:21 AM
Industry: General Machinery & Equipment
Price: 199500
Y Travel: 32"
Z Travel: 30"
Spindle Speed: 7500 rpm
Tool Capacity (ATC): 30
Table Size (W): 28"
Table Size (L): 120"
Main Spindle Motor: 30 hp
Spindle Taper: CAT 50
Spindle Nose To Table Top: 5" - 35"
Hi Pressure Coolant System: 300 psi
Part Probe: Yes
Control CNC (HAAS CNC CONTROL)
Equipt w/
4th Axis Drive
Haas HRT450 Rotary Tabel
High Speed Machining
Chip Auger
Programmable Coolant Nozzle
Rigid Tapping
Through Spindle Coolant
Renishaw Prob
Z Travel: 30"
Spindle Speed: 7500 rpm
Tool Capacity (ATC): 30
Table Size (W): 28"
Table Size (L): 120"
Main Spindle Motor: 30 hp
Spindle Taper: CAT 50
Spindle Nose To Table Top: 5" - 35"
Hi Pressure Coolant System: 300 psi
Part Probe: Yes
Control CNC (HAAS CNC CONTROL)
Equipt w/
4th Axis Drive
Haas HRT450 Rotary Tabel
High Speed Machining
Chip Auger
Programmable Coolant Nozzle
Rigid Tapping
Through Spindle Coolant
Renishaw Prob
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:15 AM
Industry: Generators & Engines
Description: I am in the market for the following single generator.
750-800kW Standby … [Read more...]
750-800kW Standby … [Read more...]
277/480V
Diesel
Open Skid
Late 90's/Early 2000's vintage is acceptable
Prefer low hours
Needs to be ready for sale
Please send me pricing and pics asap.
Diesel
Open Skid
Late 90's/Early 2000's vintage is acceptable
Prefer low hours
Needs to be ready for sale
Please send me pricing and pics asap.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 11:12 AM
Industry: General Machinery & Equipment
Price: 14500
Description: MODEL: ...................................... 500
WORKPIECE LENGTH CAPACITY ................... 2" TO 42" CLEARANCE … [Read more...]
WORKPIECE LENGTH CAPACITY ................... 2" TO 42" CLEARANCE … [Read more...]
TAILSTOCK CENTER TO COLUMN .................. 6.2"
VISE CAPACITY W/STANDARD JAWS ............... 0.060" TO 6"
CONE ANGLE OF CENTER HOLES GROUND ........... 60 DEGREES MAX
CENTER HOLE GROUND (LARGE END) .............. 2" MIN
CENTER HOLE GROUND (LARGE END) .............. 0.050"
GRINDING SPINDLE SPEEDS (W/PULLEY CHANGE): .. 13,000 / 21,500 / 45,000 RPM
VISE CAPACITY W/STANDARD JAWS ............... 0.060" TO 6"
CONE ANGLE OF CENTER HOLES GROUND ........... 60 DEGREES MAX
CENTER HOLE GROUND (LARGE END) .............. 2" MIN
CENTER HOLE GROUND (LARGE END) .............. 0.050"
GRINDING SPINDLE SPEEDS (W/PULLEY CHANGE): .. 13,000 / 21,500 / 45,000 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 10:25 AM
Industry: Other Electrical & Power Equipment
Description: I need (16) RPPs 400A 480V with 4 panels
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 9:49 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 8:51 AM
Industry: Other Electrical & Power Equipment
Price: $32,000 or best offer
Description: MultiJet Printing (MJP) technology produces high fidelity parts. The printer is easy to operate and allows multiple parts to be printed at once. Post processing removes wax to facilitate highly accurate, complex geometries. Prints multiple rigid and elastic materials.
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
Brochure: https://surplusrecord.com/wp-content/plugins/surplus_mysr/registrant_uploads/90748544787655471465.pdf
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 8:12 AM
Industry: General Machinery & Equipment
1 standard hydraulic , no CNC needed
Must have backgauge , tooling a plus
1 Hydraulic with CNC 2 or 3 axis is fine
Tooling a plus
Must be in good working condition , no leaks
No electrical or CNC issues , plug and play only
Prefer later model brakes where parts are still
Available.
Must have backgauge , tooling a plus
1 Hydraulic with CNC 2 or 3 axis is fine
Tooling a plus
Must be in good working condition , no leaks
No electrical or CNC issues , plug and play only
Prefer later model brakes where parts are still
Available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 7:39 AM
Industry: General Machinery & Equipment
Description: Okuma GP-26T CNC Cylindrical Grinder (2011)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 7:26 AM
Industry: Generators & Engines
Price: $16,500
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
$16,500 FOB Louisiana
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
$16,500 FOB Louisiana
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 7:20 AM
Industry: General Machinery & Equipment
Description: 240 Ton Amada HDS2204NTW CNC Hydraulic Press Brake (2012)
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 13, 2026 at 10:35 PM
Industry: General Machinery & Equipment
Price: best offer
Model: VL-125C
Controller: FANUC 0i-TF
Table dia.: 1,250mm
Max. swing: 1,600mm
Max. turning dia.: 1,600mm
Max. turning height: 1,250mm
X axis travel (left-right): L200+R950mm
Z axis travel (up-down): 900mm
Vertical travel of cross rail: 800mm (200x4 steps)
Table speed: 3~300rpm
Spindle motor: 37/45kw
12ATC
Tool off set
Spindle oil cooler
Air conditioner
Oil skimmer
Chip conveyor
Chip bucket
Controller: FANUC 0i-TF
Table dia.: 1,250mm
Max. swing: 1,600mm
Max. turning dia.: 1,600mm
Max. turning height: 1,250mm
X axis travel (left-right): L200+R950mm
Z axis travel (up-down): 900mm
Vertical travel of cross rail: 800mm (200x4 steps)
Table speed: 3~300rpm
Spindle motor: 37/45kw
12ATC
Tool off set
Spindle oil cooler
Air conditioner
Oil skimmer
Chip conveyor
Chip bucket
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
