Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: May 20, 2026 at 8:59 PM
Industry: General Machinery & Equipment
Price: 7500
Description: Here's a tightened version under 500 words for Machinio (and you can reuse on Craigslist):
Title: Aurora 5-481-15 Fire Pump, 1000 GPM @ 70 PSI, 60 HP WEG Motor, UL/FM … [Read more...]
Title: Aurora 5-481-15 Fire Pump, 1000 GPM @ 70 PSI, 60 HP WEG Motor, UL/FM … [Read more...]
Description:
Aurora (Pentair Pump Group) horizontal split case electric fire pump with matching WEG motor. Originally installed March 2012 at a commercial property in Washington, DC and removed approximately 4 years later when the building was expanded and a higher-capacity pump was specified. Stored indoors since removal.
Aurora (Pentair Pump Group) horizontal split case electric fire pump with matching WEG motor. Originally installed March 2012 at a commercial property in Washington, DC and removed approximately 4 years later when the building was expanded and a higher-capacity pump was specified. Stored indoors since removal.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 5:48 PM
Industry: Circuit Breakers
B440LSIM (18)
B440LSIGM (6)
32-SSD16B216 1,600 amp power break II
B216LSIGM (8)
B216LSIM (24)
All electrically operated
Bell Alarms
Shunt Trips 120v
Data center takeouts
B440LSIGM (6)
32-SSD16B216 1,600 amp power break II
B216LSIGM (8)
B216LSIM (24)
All electrically operated
Bell Alarms
Shunt Trips 120v
Data center takeouts
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 3:29 PM
Industry: Generators & Engines
Budget: $5,001 - $10,000
Description: Looking for a diesel driven welder. Do not care the brand. 300amp minimum. It needs to be able to run a constant voltage (CV) output so that a suitcase MIG welder can be hooked up. The welder will run FCAW and SMAW.
Looking for 5 units in total.
Looking for 5 units in total.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 3:26 PM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
PREBEND: 5/8" MINIMUM
LENGTH: 8'
LENGTH: 8'
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 2:19 PM
Industry: Transformers
Description: Looking for 1 only - 7500KVA Pad Mount Oil Filled HV 25000kV Delta to LV 4160FRDY/2400V Transformer
Made to CSA C227.4;21
Made to CSA C227.4;21
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 1:28 PM
Industry: Other Electrical & Power Equipment
Description: blank doors and hardware for the sizes listed below
MCC FPE 5310 Series … [Read more...]
MCC FPE 5310 Series … [Read more...]
5-7/8 x 14-7/8
5-7/8 x 15
5-7/8 x 15-1/2
5-7/8 x 15
5-7/8 x 15-1/2
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 1:25 PM
Industry: Generators & Engines
Description: We are interested to buy two or more GE gas turbines generator packages with dual fuel preferably in LM6000, LM2500, 6B, 9E, 7, Frame models with low hours or zero hours. Will pay extra for GE extended 2 years warranty. Payment ALL CASH bank wire transfer but need ready for delivery complete units. Best Regards. Jack/GM Tubular King Group WA +17137757493
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 12:30 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: 3 roll w/ no cnc 3/8" capacity
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 12:20 PM
Industry: General Machinery & Equipment
Description: COMAC Hydraulic Angle Roll Universal Bending Machine, 5"x3/4" capacity, Model 308HV4, New 2011, Tooling
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:58 AM
Industry: General Machinery & Equipment
Description: 12 x14 Accurshear. Must be 2010 or newer.
12 x 1/2 Cincinnati Must be 2010 or newer … [Read more...]
12 x 1/2 Cincinnati Must be 2010 or newer … [Read more...]
These models only.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:57 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:50 AM
Industry: Generators & Engines
Price: $11,000
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
Year manufacture 2005
571 total hours since new
Your net $11,000
FOB Louisiana
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
Year manufacture 2005
571 total hours since new
Your net $11,000
FOB Louisiana
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:38 AM
Industry: Circuit Breakers
Description: Looking for (Qty 2) Westinghouse 75DHP500, 2000AMP breakers - any control voltage
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:36 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 2021-CRM-4
YEAR: 2021
SPECIFICATIONS:
Maximum Strip Width: 11.8″ (300 mm)
Maximum Thickness to be Reduced: .118″ (3 mm)
EQUIPPED WITH:
(2) Motors, 2 HP (1.5KW) each
YEAR: 2021
SPECIFICATIONS:
Maximum Strip Width: 11.8″ (300 mm)
Maximum Thickness to be Reduced: .118″ (3 mm)
EQUIPPED WITH:
(2) Motors, 2 HP (1.5KW) each
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:34 AM
Industry: General Machinery & Equipment
Shear Strength: 50,000 PSI (22,679 kgs.)
Maximum Coil Weight: 10,000 Lbs. (4,535 kgs.)
Coil I.D.:
Entry: 16″ – 24″ (406 – 609 mm)
Recoiler: 20″ (508 mm)
Line Direction: Right to Left
Maximum Coil Weight: 10,000 Lbs. (4,535 kgs.)
Coil I.D.:
Entry: 16″ – 24″ (406 – 609 mm)
Recoiler: 20″ (508 mm)
Line Direction: Right to Left
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:32 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 00215-5910
YEAR: 1985
SPECIFICATIONS:
Capacity: 165 Ton
Blanking Capacity: 130 Ton
Slide Stroke: 5.11" (130 mm)
Strokes Per Minute: 40 – 85
Die Height: 13.77" (350 mm)
Slide Adjustment: 3.93" (100 mm)
Slide Area: 27.55" (700 mm) (Left – Right), 22.83" (580 mm) (Front – Back)
Bolster Area: 46.06" (1170 mm) (Left – Right), 23.62" (600 mm) (Front – Back)
EQUIPPED WITH:
15 HP Motor: 460 / 3 / 60
Push Button Panel
Servo Fee
YEAR: 1985
SPECIFICATIONS:
Capacity: 165 Ton
Blanking Capacity: 130 Ton
Slide Stroke: 5.11" (130 mm)
Strokes Per Minute: 40 – 85
Die Height: 13.77" (350 mm)
Slide Adjustment: 3.93" (100 mm)
Slide Area: 27.55" (700 mm) (Left – Right), 22.83" (580 mm) (Front – Back)
Bolster Area: 46.06" (1170 mm) (Left – Right), 23.62" (600 mm) (Front – Back)
EQUIPPED WITH:
15 HP Motor: 460 / 3 / 60
Push Button Panel
Servo Fee
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:26 AM
Industry: General Machinery & Equipment
Description: 2,000 Ton x 20' Hydraulic Press Brake, CNC Control a Plus, But Not Necessary
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:21 AM
Industry: General Machinery & Equipment
Price: $44,500
Max POB: 28r/min
Standard Max Radius: 12 inch
Max Bend Angle: 190 degrees
Operating Pressure: 2000 psi
Reservoir Capacity: 175 US gallons
Voltage: 220 volt/440/3 Phase/60Hz; 50Hz Optional
Bend angle accuracy +/-: 0.1 degree
Bend arm speed: 5 rpm
Max tube length over mandrel: 8'
25HP Motor
Bendpro G2 CNC Control
1 3/4" Tooling
2.5" Tooling Mandrel Extractor
Approx Weight: 10000lbs
Approx Dim: 15′ L x 5′ W x 4.5′ H
Standard Max Radius: 12 inch
Max Bend Angle: 190 degrees
Operating Pressure: 2000 psi
Reservoir Capacity: 175 US gallons
Voltage: 220 volt/440/3 Phase/60Hz; 50Hz Optional
Bend angle accuracy +/-: 0.1 degree
Bend arm speed: 5 rpm
Max tube length over mandrel: 8'
25HP Motor
Bendpro G2 CNC Control
1 3/4" Tooling
2.5" Tooling Mandrel Extractor
Approx Weight: 10000lbs
Approx Dim: 15′ L x 5′ W x 4.5′ H
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:15 AM
Industry: General Machinery & Equipment
Price: $26,500
Cutting Speed 55 to 575 FPM
Single Stroke Feed 20"
Multi Feed Length 393"
Clamping Force 440 to 2750 lbs
Blade Diameter 14"
Kasto Pro Control
CNC Control
Feed
Main Motor
Hydraulic Motor
Guards
Length 63"
Width 120"
Height 90"
Weight 7100 lbs
Single Stroke Feed 20"
Multi Feed Length 393"
Clamping Force 440 to 2750 lbs
Blade Diameter 14"
Kasto Pro Control
CNC Control
Feed
Main Motor
Hydraulic Motor
Guards
Length 63"
Width 120"
Height 90"
Weight 7100 lbs
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 11:07 AM
Industry: General Machinery & Equipment
Price: $250,000
Description: Max Dia External Gear Cut (Nominal): 70” (1778mm)
Max Dia Internal Gear Cut (Nominal): 88” (2235mm) … [Read more...]
Max Dia Internal Gear Cut (Nominal): 88” (2235mm) … [Read more...]
Max Dia Workpiece Accommodated: 104” (2642mm)
Worktable Dia:84” (2133.6mm)
Max Permissible Weight Of Workpiece & Fixture: 36,000 Lbs(16,500 Kgs)
Workspindle Centerline To Centerline Of Cutter Spindle: max. 35” (889mm) | min. 0” (0mm)
Dia Of Cutter Spindle:6.25” (158.75mm)
Max Stroke Length:19.118” (485.6mm)
Max Face-Width (Nominal):15” (381mm)
Stroking Speeds: 5 To 122 S.P.M.
Worktable Dia:84” (2133.6mm)
Max Permissible Weight Of Workpiece & Fixture: 36,000 Lbs(16,500 Kgs)
Workspindle Centerline To Centerline Of Cutter Spindle: max. 35” (889mm) | min. 0” (0mm)
Dia Of Cutter Spindle:6.25” (158.75mm)
Max Stroke Length:19.118” (485.6mm)
Max Face-Width (Nominal):15” (381mm)
Stroking Speeds: 5 To 122 S.P.M.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 10:42 AM
Industry: General Machinery & Equipment
Description: BSCO Inc Pole Seam Welder (this MFG only!), 30” Dia. X 40’ length capacity.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 10:21 AM
Industry: Generators & Engines
Qty 1, Used/Refurbished Engine, Cummins, QSB6.7, 158HP, CPL3856, Date of Mfg: 05SEP17, Ref No. 334/R7764
Thank you,
Clay Raley
Sales & Marketing Manager
Cell: 720-940-3601
Thank you,
Clay Raley
Sales & Marketing Manager
Cell: 720-940-3601
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 10:19 AM
Industry: General Machinery & Equipment
Description: Okuma MA-600HB 4 Axis Horizontal Machining Center (2010)
4 Axis, OSP P200MA CNC, 240 ATC, High Pressure Coolant Through Spindle
4 Axis, OSP P200MA CNC, 240 ATC, High Pressure Coolant Through Spindle
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 9:20 AM
Industry: Generators & Engines
Price: 35000
Year 2005
Serial Number GMBCO5F080053
Stock Number ED01017
Hours 570
Manufacturer Cummins
Model 250GEBC
kW Power Rating 250
Voltage 480
Phase 3
Enclosure Sound
Fuel Natural Gas
Serial Number GMBCO5F080053
Stock Number ED01017
Hours 570
Manufacturer Cummins
Model 250GEBC
kW Power Rating 250
Voltage 480
Phase 3
Enclosure Sound
Fuel Natural Gas
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 8:59 AM
Industry: Processing Equipment
Budget: $10,001 - 50,000
Description: We currently are using a Mitts & Merrill shredder model AZ-7. Cutting chamber is ~18 x 12. Looking for somethng comparable in size. Total footprint is 60" x 30" x 60"
We shred rubber slabs 12" x ~1/4"- 3/8" thickness.
We shred rubber slabs 12" x ~1/4"- 3/8" thickness.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 8:54 AM
Industry: Processing Equipment
Description: Good morning,
My name is Ruben Sarasua, and I am the general manager of Papelera del Nevado, in Mexico. We are looking for a Krofta clarifier, a SPC30 or similar. Do you have something like that? … [Read more...]
My name is Ruben Sarasua, and I am the general manager of Papelera del Nevado, in Mexico. We are looking for a Krofta clarifier, a SPC30 or similar. Do you have something like that? … [Read more...]
Best regards,
Ruben Sarasua
Ruben Sarasua
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 8:45 AM
Industry: General Machinery & Equipment
Description: 4 Used Mechanical Straight Side Double Crank Presses Available Tons from 250 to 400. 1 Clearing 250-ton Model SD2-250-84T, 1 Minster 250-ton Model SD2-250-60-48, 1 Minster 300-ton Model E2-300-72-36, 1 Verson 400-ton Model S2-400-84-42. All machines can be seen under power at same location.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 8:22 AM
Industry: Motors - A.C. & D.C.
Description: Looking for a motor with the attached nameplate.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 8:11 AM
Industry: Transformers
Description: 3 PHASE GENERAL PURPOSE TRANSFORMER FOR 300HP 4160V PRIMARY, 460V SECONDARY
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 7:48 AM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, Full Enclosure, Chip Conveyor, High Pressure Coolant,
New 2007
New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 7:39 AM
Industry: General Machinery & Equipment
Description: Masteel 14200 200 Ton X 14' Hydraulic Press Brake (2006)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 7:29 AM
Industry: Generators & Engines
Price: $675,000 OBO Delivered
Description: WARRANTY POSSIBLE: TURNKEY Fully Integrated Schneider BESS Battery Energy Storage System 1.25MW - Commercial ESS
Capacity: 1.2 MW C&I BESS … [Read more...]
Capacity: 1.2 MW C&I BESS … [Read more...]
Architecture: Fully integrated (battery + controls + distribution)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 20, 2026 at 7:29 AM
Industry: Other Electrical & Power Equipment
Price: $675,000 OBO Delivered
Description: WARRANTY POSSIBLE: TURNKEY Fully Integrated Schneider BESS Battery Energy Storage System 1.25MW - Commercial ESS
Capacity: 1.2 MW C&I BESS … [Read more...]
Capacity: 1.2 MW C&I BESS … [Read more...]
Architecture: Fully integrated (battery + controls + distribution)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 5:46 PM
Industry: General Machinery & Equipment
Description: Looking for a clean good simple 200 ton x 12' Hydraulic Brake, Does not have to have CNC. If you have a good machine, Quote with price, video & photos. No phone calls at this time please & please send a quote with specs, photos & most of all a price.
Not interested in Chinese or LVD machines.
Not interested in Chinese or LVD machines.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 5:40 PM
Industry: General Machinery & Equipment
Model No. HBM 175-8-10
Overall bed length 10'
Distance between housing 8' 6"
Stroke 10"
Shut Height 7"
Open Height 17"
Gap 8 1/4"
Filler block
Power operated front reading backgauge 30”
Approx size 112" H x 52" wide
Long 130”
Wide 59”
Tall 112”
NEW 2024 Tooling
4 Way Die – 1.5”x 2” x 3’, 4” Flame Hardened
Punch U6 x 10’ Flame Hardened
4 Way Die Holder BA-2 Style
Overall bed length 10'
Distance between housing 8' 6"
Stroke 10"
Shut Height 7"
Open Height 17"
Gap 8 1/4"
Filler block
Power operated front reading backgauge 30”
Approx size 112" H x 52" wide
Long 130”
Wide 59”
Tall 112”
NEW 2024 Tooling
4 Way Die – 1.5”x 2” x 3’, 4” Flame Hardened
Punch U6 x 10’ Flame Hardened
4 Way Die Holder BA-2 Style
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 4:25 PM
Industry: General Machinery & Equipment
Description: Need a horizontal hone, 12-15' in length and 3-15" bore
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 3:38 PM
Industry: Circuit Breakers
Description: Need only 2 x Extension handels for HND312T33
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 12:50 PM
Industry: Motors - A.C. & D.C.
Used if poss But would be open to purchasing new depending on price
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 12:47 PM
Industry: General Machinery & Equipment
Description: NEED A MACHINE CAPABLE OF BREAKING 1/4" CARBON FLOOR PLATE OVER 10'
SIMPLE MACHINE, NO CNC OR PROGRAMMABLE CONTROL
SIMPLE MACHINE, NO CNC OR PROGRAMMABLE CONTROL
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 12:14 PM
Industry: Other Electrical & Power Equipment
Description: Looking for qty 9 of 21/17KV MCOV station class lightning arresters like Hubbell model EVP2017003010. Let me know if you have anything close or an equivalent, thanks.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 12:01 PM
Industry: Generators & Engines
Description: CATERPILLAR Model DG500-CG18 Natural Gas Generator Set, U.L. 2200, 120/208V or Change to 277/480V, CAT 105 Degree C Prime Power, PM Generator with Space Heater, EMCP 4.3 Control Panel, Auto Start / Stop Capability, Engine Safety Shutdowns, Electronic Governor, 2000 Amp Circuit Breaker, Oil Filters & Std Air Cleaner, Jacket Water Heater, 24V Starter, 10A Battery Charger, Gas Regulator 1.5-to-60 PSI, Radiator, Sound Attenuated Aluminum Enclosure (White) IBC Wind Certified to 180 MPH, 60HZ
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 11:59 AM
Industry: General Machinery & Equipment
Price: $32,000 or best offer
Description: MultiJet Printing (MJP) technology produces high fidelity parts. The printer is easy to operate and allows multiple parts to be printed at once. Post processing removes wax to facilitate highly accurate, complex geometries. Prints multiple rigid and elastic materials.
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
Brochure: https://surplusrecord.com/wp-content/plugins/surplus_mysr/registrant_uploads/90748544787655471465.pdf
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 11:55 AM
Industry: Processing Equipment
Price: Best Offer
Description: Anritsu Model KWS5366BW6D Serial# 4600257492 - Last Validated 9/10/2020 - Crated since early 2021
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 11:23 AM
Industry: General Machinery & Equipment
Description: Campbell Model 750-36-36-36/42 CNC Vertical Universal Grinder (2012)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 11:07 AM
Industry: Generators & Engines
Price: 21000
Description: Just available from a vessel that failed inspection and has been scrapped.
2 x 3208 Cat propulsion engines. … [Read more...]
2 x 3208 Cat propulsion engines. … [Read more...]
App. 5000 hours
Rated 375 HP.
$21,000 USD for the pair.
Rated 375 HP.
$21,000 USD for the pair.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 11:02 AM
Industry: Processing Equipment
Description: Need Model E4 Capper
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 10:58 AM
Industry: Circuit Breakers
Description: 400A CR193D Draw-Out Starter with no Aux switches or accessories. Customer has a unit in house now that has 2 bad bottles and they need to put a unit in service ASAP. Feel free to quote a rental starter as well as 400A vacuum bottles as long as they are the new style that fit draw-out style starters.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 10:32 AM
Industry: Other Electrical & Power Equipment
Price: best offer
Description: New In Crate. Kaeser - KED1800 Desiccant air dryer - Rated cap. 1800SCFM @ 100 PIG. Unit was purchased but never installed.
Unit will come with 2 new crates of desiccant.
Unit will come with 2 new crates of desiccant.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 10:25 AM
Industry: Processing Equipment
Price: Best offer (like new)
No. - 60942000114
C/W - WV 1000 B 023 ZZXZ (top unit in picture)
FOB - Ontario, Canada
Please contact for additional info.
Two complete systems available. Will sell individually.
The units are like new. Were used in the solar industry.
C/W - WV 1000 B 023 ZZXZ (top unit in picture)
FOB - Ontario, Canada
Please contact for additional info.
Two complete systems available. Will sell individually.
The units are like new. Were used in the solar industry.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 10:08 AM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: 12' 1/4" Hydraulic shear w/ cnc back gauge prefers Accurshear
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 9:49 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: Vectrax Model# 00923011 Band Saw, with 1 HP 220V class A motor.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 9:33 AM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: Need VMC to replace an Ooya RE-1MV1 Vertical Machine
Floor Space and Footprint Dimensions … [Read more...]
Floor Space and Footprint Dimensions … [Read more...]
Base Machine Footprint (Width x Depth): 216 inches x 118 inches (18 ft x 9.8 ft)
Total Working Width (X-axis fully extended): 260 inches
(9.8’ is the maximum depth (Y direction)
Must be a 50 taper holders, they cut hard metals on this machine.
Total Working Width (X-axis fully extended): 260 inches
(9.8’ is the maximum depth (Y direction)
Must be a 50 taper holders, they cut hard metals on this machine.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 7:44 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 7:42 AM
Industry: General Machinery & Equipment
Description: Okuma GP-26T CNC Cylindrical Grinder (2011)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 7:35 AM
Industry: Motors - A.C. & D.C.
Description: Looking to purchase a 500 hp 3450 rpm 5008S fr 460v motor. New or rewound.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 6:21 AM
Industry: Motors - A.C. & D.C.
Description: SQ-7374, DC Motor 30Hp 1166Rpm 364Z Frame rotor 255v / Amps 58
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 19, 2026 at 1:18 AM
Industry: General Machinery & Equipment
Price: best offer
Model: BMC-4122
Controller: FANUC 0iMF Plus (15” LCD)
DATA SERVER, AICC 2
X/Y/Z axis travel: 4,100/2,200/900mm
Dist. between columns: 2,300mm
Table size: 4,000x2,100mm
Spindle speed: 6,000rpm (Gear driven)
Spindle power: 22/26kw
BT50 / 30ATC
Coolant thru spindle 20bar
Air thru spindle
Spindle oil cooler
3 axes cooling system
Heat exchanger
Oil skimmer
Controller: FANUC 0iMF Plus (15” LCD)
DATA SERVER, AICC 2
X/Y/Z axis travel: 4,100/2,200/900mm
Dist. between columns: 2,300mm
Table size: 4,000x2,100mm
Spindle speed: 6,000rpm (Gear driven)
Spindle power: 22/26kw
BT50 / 30ATC
Coolant thru spindle 20bar
Air thru spindle
Spindle oil cooler
3 axes cooling system
Heat exchanger
Oil skimmer
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 3:49 PM
Industry: General Machinery & Equipment
Description: OKUMA MA-50HB FLEXIBLE MACHINING CELL CONSISTING OF 2 50 TAPER HORIZONTALS, 48 PALLET POSITION FASTEMS SYSTEM WITH 44 PALLETS (SOFTWARE UPDATED 2021), 200 ATC PER MACHINE, 12,000 RPM, INSPECT UNDER POWER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:59 PM
Industry: General Machinery & Equipment
Price: 8950.00
Description: For Sale (1) used Okuma Model LK (P) Precision 14 x 40 Gear Head Toolroom Lathe with Tooling
1 Owner - original owner retired
1 Owner - original owner retired
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:51 PM
Industry: Other Electrical & Power Equipment
Description: Good morning
I would like to request a quote or availability for the gears and shaft for a FALK MODEL 2090Y1-L. … [Read more...]
I would like to request a quote or availability for the gears and shaft for a FALK MODEL 2090Y1-L. … [Read more...]
Please let me know the pricing and estimated lead time for these components.
Best regards,
Luis Bernardo Rodriguez
Best regards,
Luis Bernardo Rodriguez
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:41 PM
Industry: Other Electrical & Power Equipment
Description: Please quote me price and availability on a GE ADS36600HD 600A 600V Fusible switch with (3) 600A Fuses New or nice refurbished.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:40 PM
Industry: Generators & Engines
Price: 14,000
Generac / Gemini
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
Your net $14,000
FOB New Orleans, Louisiana
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
Your net $14,000
FOB New Orleans, Louisiana
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:14 PM
Industry: General Machinery & Equipment
Description: 4.3" Stanko, HBM, X =48”, Y=40”, W=43”. Z=28”, Heidenhain Three Axis Digital Readout, Built In T-Slotted Rotary Table,
Pendant Control, Harden Ways, Hydraulic Unit, Way Covers, Work Light
Pendant Control, Harden Ways, Hydraulic Unit, Way Covers, Work Light
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 2:13 PM
Industry: General Machinery & Equipment
Description: Okuma LU45-M Impact, 2 Saddle, Live Tooling, Machining Center, Tail Stock, 2000 RPM, Rohm 27" 3-Jaw Quick Change Jaws
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 1:45 PM
Industry: General Machinery & Equipment
Price: $500 or Best Offer
Description: Very good condition Filtermist separator. Used to remove oil from mist produced by equipment such as screw machines or lathes. Includes wall bracket.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 1:32 PM
Industry: Generators & Engines
Price: $47,602.99
Description: 1990- 3516 CAT- OST Crane yard, Ventura CA. -70,000 lbs, enclosed.
Quinn Inspection report - Oil sample as well results. … [Read more...]
Quinn Inspection report - Oil sample as well results. … [Read more...]
1600kw Standby rated
480 Volt
951 hours Since New
480 Volt
951 hours Since New
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 1:25 PM
Industry: Processing Equipment
Description: Hi,
I have an Evapco cooling tower that I'm thinking about replacing. Do you have the same or similar one? My existing cooling tower is model AT4-43 and the serial number is 904746. I look forward to hearing from you. … [Read more...]
I have an Evapco cooling tower that I'm thinking about replacing. Do you have the same or similar one? My existing cooling tower is model AT4-43 and the serial number is 904746. I look forward to hearing from you. … [Read more...]
Thank you!
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 12:58 PM
Industry: Processing Equipment
Price: Looking for offer
Description: Decommissioned nitrogen cylinders (vented the tanks, left the tanks open and abandoned the tanks with punched threads)
Located in Pennsylvania, photos available, looking for offer, loaded.
Located in Pennsylvania, photos available, looking for offer, loaded.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 12:54 PM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, Full Enclosure, Chip Conveyor, High Pressure Coolant,
New 2007
New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 12:13 PM
Industry: Generators & Engines
Price: $145,500.00
Description: Sound Attenuated, Mobile CATERPILLAR Diesel Generator Set, Packaged in 2022 with New 20’ Sound Attenuated Container, C15 Tier 2 Emissions, CAT EMCP 3.1 Premium Generator Control Panel, Auto start / Stop Capability, Engine Safety Shutdowns, CAT Generator, Circuit Breaker, Electronic Governor, Jacket Water Heater, 24V Starter, 45 Amp Alternator, Standard Duty Air Cleaner, Radiator, DW Fuel Tank, Tandem Axle Trailer Chassis DOT Inspected
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 11:35 AM
Industry: General Machinery & Equipment
Description: Forklift - 15/25 17/25 25/35 Veralift, Hoist, Royal Forklift WANTED
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 11:11 AM
Industry: General Machinery & Equipment
Description: Need a Clausing Colchester approx 21" x 100-120"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 11:00 AM
Industry: General Machinery & Equipment
Description: Hurco HTL model CNC Lathe, Can be and 8 or 10.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 10:31 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: The facility is closing, creating a rare opportunity to acquire high-quality systems and components at liquidation-level pricing, and we are currently accepting offers for the entire system package.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 9:58 AM
Industry: Generators & Engines
Description: Kraft Power is looking for
# 2 - Cat or similar engineS - Nat gas, compression application … [Read more...]
# 2 - Cat or similar engineS - Nat gas, compression application … [Read more...]
2100 hp up to 3300 hp, 1000 rpm, remanufactured
Please quote what you have
Please quote what you have
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 18, 2026 at 8:22 AM
Industry: General Machinery & Equipment
Description: 10-12’ press brake. 90-125 ton. MUST HAVE BEND ASSIST1
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 17, 2026 at 1:24 PM
Industry: Other Electrical & Power Equipment
Description: 88 new-in-box Philips Color Kinetics ColorCast 14 Full RGB LED architectural fixtures, Item# 123-000001-00 (White). Individually wrapped in original foam-lined manufacturer packaging with installation guides included. UL Listed, CE Marked. Located in Roswell, GA. Asking $6,000 for the lot (~$68/unit). Will consider partial lots.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 16, 2026 at 6:51 AM
Industry: Other Electrical & Power Equipment
Price: 3500
Description: For sale is a brand-new, unused Eaton ATC-300+ Automatic Transfer Switch (ATS) Retrofit Kit. This is a complete manufacturer-engineered kit designed to upgrade or replace the controller section of a standby power or emergency power system. Manufactured in 2024, this unit features the latest firmware and hardware revisions from Eaton/Cutler-Hammer.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 3:35 PM
Industry: General Machinery & Equipment
Description: New, Never Put Into Production (2021) Axile G6 5 Axis High Speed Gantry Type Machining Center (2021) For Immediate Sale
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 2:27 PM
Industry: Generators & Engines
qty 1 - 100a 480v
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 2:26 PM
Industry: General Machinery & Equipment
Description: Okuma LU45-M Impact, 2 Saddle, Live Tooling, Machining Center, Tail Stock, 2000 RPM, Rohm 27" 3-Jaw Quick Change Jaws
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 2:18 PM
Industry: Other Electrical & Power Equipment
Description: I would like to sell these brand-new Hoffman Enclosures, let me know if interested.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 1:02 PM
Industry: Other Electrical & Power Equipment
Description: STAINLESS STEEL Control Station: (2) Flush Push Buttons, 0 Pilot Lights, 2NO/2NC, Start/Stop, (2) Momentary. ANY BRAND
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 12:37 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 12:25 PM
Industry: Generators & Engines
Description: I am looking for a good, used Caterpillar C175-16 diesel generator set, with a rated power of 3000 kW, 60 Hz, and 4160 V; preferably in an open-set configuration.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 12:18 PM
Industry: General Machinery & Equipment
Price: 20000
Description: Lightly used Cascade double oven pump and cold trap. We're located in Provo, Utah.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 11:40 AM
Industry: General Machinery & Equipment
Specifications:
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″
Bar Capacity: 6.5″
X Axis Travel: 14.2″
Z Axis Travel: 84.8″
Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Equipped With:
21″ Hydraulic Chuck, Chip Conveyor, SMW Hydraulic Steady
Tailstock,
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″
Bar Capacity: 6.5″
X Axis Travel: 14.2″
Z Axis Travel: 84.8″
Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Equipped With:
21″ Hydraulic Chuck, Chip Conveyor, SMW Hydraulic Steady
Tailstock,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 11:10 AM
Industry: Generators & Engines
Description: Looking for (2) 2000kW Natural Gas Cummins unit for immediate shipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 10:36 AM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 10:21 AM
Industry: Generators & Engines
Description: looking for NEw CAT, Enclosed base tank, sound house. 480 votl.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 10:20 AM
Industry: General Machinery & Equipment
Description: EOS M270 3D Printer (2007)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 10:12 AM
Industry: Motors - A.C. & D.C.
Price: $4000
Description: Lincoln 200 HP part winding start motor, 460 volt three phase 445T frame. Serial no. 3427553. shaft is 3.375 dia x 8.35 length
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 9:47 AM
Industry: General Machinery & Equipment
Description: Looking for a nice later model tool setter
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 9:30 AM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 9:03 AM
Industry: General Machinery & Equipment
Price: 24000 or best offer
Description: For immediate sale, like new conveyors and racking, consolidated and ready for loading in Fort Wayne, Indiana
Carton Flow racks (new) - … [Read more...]
Carton Flow racks (new) - … [Read more...]
11 ½ inch wide x 45 inches long, 1,031 pcs total;
17 ½ inch wide x 45 inches long 1,980 pcs total
2 Hytrol drive conveyors 10 foot
Yellow 8-foot cross beams for pallet racking –
Total of 655 pcs new
5 each 18 foot long expandable/scissor flow racks
17 ½ inch wide x 45 inches long 1,980 pcs total
2 Hytrol drive conveyors 10 foot
Yellow 8-foot cross beams for pallet racking –
Total of 655 pcs new
5 each 18 foot long expandable/scissor flow racks
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 8:53 AM
Industry: Other Electrical & Power Equipment
Serial #: B-227
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 8:08 AM
Industry: Circuit Breakers
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 15, 2026 at 5:38 AM
Industry: Generators & Engines
Price: $15,000
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
Your net $15,000
FOB Louisiana
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
Your net $15,000
FOB Louisiana
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 8:38 PM
Industry: General Machinery & Equipment
Price: best offer
Model: S500XD1
Controller: CNC D00 (DA)
X/Y/Z axis travel: 500/400/300mm
Table size: 600X400mm
Max. load weight: 250kgs
Spindle speed: 10,000rpm
BT30/21ATC
RENISHAW tool measuring system
Oil mist collector
With YUKIWA A/C rotary table
Controller: CNC D00 (DA)
X/Y/Z axis travel: 500/400/300mm
Table size: 600X400mm
Max. load weight: 250kgs
Spindle speed: 10,000rpm
BT30/21ATC
RENISHAW tool measuring system
Oil mist collector
With YUKIWA A/C rotary table
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 14, 2026 at 8:00 PM
Industry: Other Electrical & Power Equipment
Price: $4,000 / 5 pieces lot
Description: I have 5 complete camera kits, These are high-end Bosch cameras that have never been taken out of the box. The factory seals are still on them.What’s included in each set:The Camera: A Bosch "Autodome" (Model: NDP-7512-Z30). It’s a 1080p high-def camera that can zoom in 30x and see very clearly in the dark. The Mount: A matching heavy-duty pole mount (Model: VG4-A-9541) so you can install it on a mast or pole right away.Condition: Everything is NEW.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
