Buy or Sell Your Reciprocating Gas Compressors
AI-ranked results for reciprocating gas compressors - closest matches first
12500 lb. Eagle Pitcher #T125D, hard rubber fork truck, 126" lift, LP, 3-stage mast
Aleco Machinery Sales | Milwaukee, WI
Category: Forklifts
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Eagle
Model: T125D
Pre Owned 1996 Eagle Pitcher T125D Hard Rubber Fork Truck, Serial Number: 5MB03481, Lift Capacity 12500 Lbs @ 24”, Lift Height 126”, Hard Rubber Tires, Triple Stage Mast, Perkins LP Gas Engine.
Advance SW8000 LPG, Scrubber / Sweeper, 1210 hours, S/N: 1000069659, 2019
Madisa - Heavy Machinery | Santa Catarina,
Category: Floor Scrubbers and Sweepers
Seller: Madisa - Heavy Machinery
Location: Santa Catarina,
Mfr: Advance
Model: SW8000 LPG
Year: 2019
Sitting man sweeper, LP gas engine model Kubota WG1605 EPA, cleaning width with 2 brushes of 1.9 mts, waste hopper, Dustclear dust control system.
5000 lb. Mitsubishi #FGC25K, LP gas forklift,cushion tire, 187" lift height,side shift, 1998
Yoder Machinery Sales | Holland, OH
Category: Forklifts
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Mitsubishi
Model: FGC-25K
Year: 1998
SERIAL. AF82004563, MODEL. FGC25K, YEAR NEW. 1998, CAPACITY. 5000 LBS, LIFTING HEIGHT. 187", FORK LENGTH. 48", SIDE SHIFT. YES, FRONT TIRES. 21" X 7"X 15", REAR TIRE. 16" X 6" 10.5", MAST TILTS. 6 DEGREE, TRUCK WIDTH. 34.5", FUEL. LP GAS, HOURS. 6081.
36" width x 36" H x 48" D AFC Holcroft #36-48-36, temper furnace, 1400°F
Heat Treat Equipment Co | Canton, MI
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Holcroft
Manufacturer: Atmosphere Furnace Company, Type: Gas-Fired Temper Furnace, Serial Number: 61434, Workable Dim’s: 36” wide x 48” deep x 36” high, Max Temp: 1250°F, Fuel: Gas-fired, Rated:480 V, 3-Phase, 60 Hz, 30 Amps.
Adco #CTFL-440V, compact, automatic, Stainless Steel, single head, hot melt glue, tray former & sealer, 10-50 cycles/minute
Frain Industries | Carol Stream, IL
Category: Sealers and Sealing Systems
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Adco
Model: CTFL-440V
Adco Model CTFL-440V, compact, automatic, stainless steel, single head, hot melt glue, tray former and sealer with number of trays per minute – depending on materials and application. Tray size range: 8-1/2" to 25" in Length; 7" to 18" in Width; 2" to 8" in Height. Flat blank size ...more
Smith Hughes #RT-4HWA, RENTAL, 4MM BTU, 50 psi, 180°F, Weil-McLain, Nat Gas fired, hot water boiler, trailer enclosed
Smith Hughes Co | Cincinnati, OH
Category: Firetube Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RT-4HWA
RT-4.8HWA, 4.8 MMBTU Output Hot Water Boiler, Natural Gas-Fired, Model # WMC-BGL-988R-WF State ID # 297599, 297600, Serial # CP7543242, CP7543243, Complete hot water boiler room package is designed to be placed in service at customer, specified location with minimal on-site work., Includes:, • 48’ Enclosed ...more
Cleaver Brooks #CB-200-300, Boiler, Natural Gas/Oil, 150 psi, 12553000 BTU/hr., 1974
C3 Surplus LLC | Miami, FL
Category: Firetube Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB-200-300
Year: 1974
Overview, This 300 HP Cleaver Brooks CB200-300 Packaged Steam Boiler is a proven workhorse that continues to deliver reliable steam generation after 50 years of service. This unit demonstrates the legendary durability of Cleaver Brooks construction with recent retube and repainting work completed. Manufactured in ...more
Frick #TDSH355L, Rotary Bare Screw Compressor, Natural Gas Refrigerant, 3600 RPM, 375 psi, 1999
Genemco | Hearne, TX
Category: Bare Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: TDSH355L
Year: 1999
Frick TDSH355L Rotary Bare Screw Compressor.
95 HP Gardner Denver #SSHG99B, screw compressor, Caterpillar G3304NA NG engine, 3-stage, 2005
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Wainwright, AB
Mfr: Gardner Denver
Model: SSHG99B
Year: 2005
For sale: a reliable and efficient 2005 Gardner Denver screw compressor, model SSHG99B. This natural gas-driven compressor s a maximum horsepower of 95 and operates at a rated RPM of 1800. Designed for sweet service conditions, it is housed and portable, making it an excellent choice for various applications. With ...more
95 HP Gardner Denver #SSHG99B01, screw compressor, Caterpillar G3304NA NG engine, 1-stage, 2001
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Sandy Lake, AB
Mfr: Gardner Denver
Model: SSHG99B01
Year: 2001
Available for sale: A 2001 Altronic SSHG99B01 compressor powered by natural gas, featuring a Gardner Denver screw compressor type. This unit has a maximum horsepower of 95 and operates at a rated RPM of 1800. It is housed in a building measuring 20' x 10' x 9', heated, and fully operational with inspection ...more
Roaster, Coffee - Nut Toper Coffee and Nut Roaster
Libra Machinery & Equipment LLC | Palmerton, PA
Category: Cooking Systems
Seller: Libra Machinery & Equipment LLC
Location: Palmerton, PA
Mfr: Toper
Model: TKM-SK60
Year: 2007
Toper Coffee and Nut Roaster model TKM-SK60, Fast roast time 12 min, Slow roast time 22 min, Drum capacity 132 lbs., Thermal transfer hot air natural gas, Last used to roast nuts.
Frascold CXW02-60-230-Y, Semi-Hermetic Compact Compressor, 60HP, 400-460V
Genemco | Hearne, TX
Category: Semi-Hermetic Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frascold
Model: CXW02-60-230 Y
Frascold Screw Semi-Hermetic Compressor - Model: CXW02-60-239Y, Serial: HN001003. Built-in part-winding starting (PWS) Electric Motor and Thermal protection probes connected to the electronic control module. Suitable for low compression ratios (typically water-cooled units. (PWS (Y/YY) = 50Hz, 380-420 V, (60 Hz ...more
27 HP Sunfab Hydraulics #M012WH-B4KU, PC Compression NK60 screw compressor, 2007
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Britannia, SK
Model: M012WH-B4KU
Year: 2007
For sale: PC Compression screw compressor model NK60. This portable unit s a maximum horsepower of 27 and operates with a single stage. Built in 2007, it is designed for sweet service type applications and is currently connected and operational. The compressor includes a package with housing by Sunfab Hydraulics and ...more
3000 Amps, Merlin Gerin, Switchgear Box, (1) 400amp mold.case, (2) Beckwith relays
Energy & Industrial Solutions | Rockledge, FL
Category: Low Voltage Air Circuit Breakers
Seller: Energy & Industrial Solutions
Location: Rockledge, FL
Mfr: Merlin Gerin
available two each custom made switchgear cabinets,each has a 3000 amp drawout merlin gerin breaker,one 400 amp molded case breaker,and two beckwith M-420 multifunction relays., these were used to paraller cat 3516 gas gensets with the utility.like new condition always been inside.
182 Ton, Berg Chilling Systems ASR-160-4, Liquid Chiller, R-22, (4) Copeland 6-Cylinder Compressors, 160 HP, 1997
Genemco | Hearne, TX
Category: Chillers
Seller: Genemco
Location: Hearne, TX
Mfr: Berg Chilling Systems
Model: ASR-160-4
Year: 1997
Berg Chilling Systems Liquid Chiller. Model: ASR-160-4. Cooling capacity rating using R-22 is 182 tons at respective entering and leaving water temperatures of 60F and 50F and a condensing temperature of 120F. System requirements: 460 V, 334 amps, 60 Hz, 3 phase. 1997 Chill-Con Liquid Chiller Barrel. Approximately 160 ...more
65 HP Sullair #PDX12-26-206, screw compressor, 1-stage, 1800 RPM, Arrow VRG-330, 2007
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Breton, AB
Mfr: Sullair
Model: PDX12-26-206
Year: 2007
For sale: A 2007 Fin-X PDX12-26-206 natural gas screw compressor, model VRG-330, with a maximum horsepower of 65 and rated at 1800 RPM. This unit s one stage and one throw and is housed within an equipment building measuring 20' L x 8' W x 8' H. The compressor is currently disconnected but in good ...more
16MM BTU Smith Hughes #RT-16MA, RENTAL, Thermal Fluid Heater/Hot Oil, 225 psi, 750°F, Vapor Power, Nat Gas/#2 fired, low NOx, trailer enclosed
Smith Hughes Co | Cincinnati, OH
Category: Thermal Oil Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RT-16-MA
26 hp Sundstrand #18-2090RH, Single Stage Centrifugal Fuel Transfer Pump
IronHub | Calgary, AB
Category: Oil Transfer Pumps
Seller: IronHub
Location: Bonnyville, AB
Mfr: Sundstrand
Model: 18-2090RH
Year: 2000
For sale: a 2000 Gemini G26H transfer pump, an 18-2090RH pump model from Sundstrand. This portable unit s a natural gas driver with a horizontally opposed 2-cylinder engine, operating at a rated RPM of 1800. It has a maximum horsepower of 26 and is currently disconnected. Located in Bonnyville, AB, Canada, this unit ...more
Refrigeration Plant, 200 mmscfd, Alco, 1000 HP, 3577 RPM, skid, housed, 2015
IronHub | Calgary, AB
Seller: IronHub
Location: Strathmore, AB
Year: 2015
Available for sale: Alco BU-3000 package, built in 2015, featuring a sweet service type. This portable and housed unit has a maximum capacity of 200 Mmscfd and is an injection pump (Hydracell P600NCTSSB07H) driven by a Teco-Westinghouse electric motor (1000 hp). The compressor is a Frick SGC 2817 model. Currently ...more
4MM BTU Smith Hughes #RS-4MA, RENTAL, Thermal Fluid Heater/Hot Oil, 225 psi, 750°F, Vapor Power, Nat Gas/#2 fired, low NOx, skid mtd
Smith Hughes Co | Cincinnati, OH
Category: Thermal Oil Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RS-4MA
RS-4MA, 4MMBTU Thermal Fluid Heater, Natural Gas, Model # FT-0400-C, Serial # 58220 National Board # 7251, Skid Mounted 4 MMBTU Fulton Thermal Fluid Heater unit is designed to be placed in service at customer, specified location with minimal on-site work., PACKAGE INCLUDES:, • 4 MMBTU Fulton Thermal Fluid Heater ...more
Baker #3, contour grinder, tilting table, S/N 14466, #11309
N S Machine Corp. | Granger, IA
Category: Profile Grinders
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Baker
Model: 3
, Manufacturer: Baker, Model Number: No. 3, Serial Number: 14466, Stock Number: 11309, s:, Tilting table, Wheel Arbor Diameter and Length -.500" x 7/8", Capacity, Diameter of Wheels - 1/2" to 4", Capacity, Face of Wheels - 2-2-1/2-3", Diameter Hole in Cup Wheels to Fit Arbor - 1/2", Diameter of Table - 18", Distance ...more
97 KW Baldor / Baldor #GLC-100, Natural Gas or Propane Generator
Abraham Generator Sales Co | Cooperstown, ND
Category: Natural Gas Or Dual Fuel Generators
Seller: Abraham Generator Sales Co
Location: Cooperstown, ND
Mfr: Baldor
Model: GLC-100
Year: 2003
97 KW BALDOR / GM NATURAL GAS OR PROPANE GENERATOR, -Mfg. 2003, -Model Number: GLC-100, -Serial Number: P0309230002, -Rated 97 kw, Propane or 84 kw, Natural Gas, -Setup 120/240 Volt, Single Phase ONLY, -NOT Reconnectable to Other Voltages, -4 Wire, -60 Hertz, 1800 RPM, 1.0 PF, -12 Battery Volts, -Powered by an 8.1L GM ...more
Frick #RWB-II-60+, skid mounted fual gas screw compressor, 200 HP, 345 acfm, 1270 scfm
Wabash Power Equipment Co | Wheeling, IL
Category: Gas Compressors
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Frick
Model: RWB-II-60+
1 (One) 345 ACFM, 1270 SCFM Frick skid mounted Fuel Gas Screw Compressor, model RWB II 60+, methane gas service. Capacity - 3224 #/hr @ 54.4 psia, 60F suction, 263.6 psi discharge at 120F. Driven by a 200 HP Louis-Allis motor, 3600 RPM, 3/60/460V. Compressor is oil separator, suction accumulator, lube oil cooler ...more
20 HP Lattner, Gas-Fired Boiler, 1004.25 PPH, 840 MBTU/hr., 30 psi, 250 F, 2001
Machinery & Equipment Co | Brisbane, CA
Category: Firetube Boilers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Lattner
Year: 2001
20 HP Gas-Fired Boiler, manufactured by P.M. Lattner, rated for 30 PSI, 250 degrees Fahrenheit maximum water temperature, Type SM. National Board number 609, manufactured in 2001. Includes Webster control panel and gas train with Cyclonetic gas burner, Model JB1G(SG)-03-RM7895C-M.15/30H-UL, rated for 840 MBTU per ...more
Vitalis Extraction Technology #R-200-H, Supercritical CO2 Extraction System, Skid-Mounted, (3) 20 L Vessels, 200 L/hr., 5000 psi, 460 V, 1900
Revelation Machinery | Chicago, IL
Category: Cannabis Processing Machinery
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Vitalis Extraction Technology
Model: R-200-H
Year: 1900
Make: Vitalis Extraction Technology, Model: R-200-H, Year: 1900, Machine Location: Upon Request, Machine Overview, Turnkey Vitalis R-200-H extraction platform with all required thermal, hydraulic, and electrical components included, Designed for continuous CO botanical extraction up to 5,000 psi, Modular layout for ...more
125 HP Cleaver-Brooks #CB-700-125, Steam Boiler, Natural Gas, 150 psi, 5230000 BTU/hr., 480 V, 1992
C3 Surplus LLC | Miami, FL
Category: Firetube Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB-700-125
Year: 1992
Overview, This 125 HP Cleaver Brooks CB-700-125 Packaged Steam Boiler with Complete Boiler Room Equipment is designed for commercial and industrial steam applications requiring a turnkey solution. This comprehensive package includes the boiler, feed pump, and water softener - everything needed for a complete boiler ...more
150 HP Frick #RXF-68-H, rotary screw compressor, Frick XJF151, 575 V., 3600 RPM, R-717, 300 psig
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RXF-68-H
Frick RXF Series Rotary Screw Compressor Package. Model: RXF-68-H, Series No: X0323WFMNTHAA03. Frick Sales Order: 36219004000, Refrigerant: R-717, Max Design Pressure: 300 PSIG.
Mitts & Merrill #M100199G2, screw compressor, Micro Control panel
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Mitts & Merrill
Model: M100199G2
M&M Refrigeration CCS Retrofit Screw Control Panel. Model: M100199G2. Serial No: 1506103. Control Voltage: 120 VAC. Frequency: 50/60 Hz. Ph: 1. Max FLA: 51 Amps. SSCR: 5KA@240 Volts. Enclosure Type: UL Type 1.
40 gallon Groen #DHT/1P-40, Mixer Kettle, 100000 BTU/hr., 3.5" manifold gas press, 6" from sidewalls, 10" from back walls
Genemco | Hearne, TX
Category: Kettles (Food Based)
Seller: Genemco
Location: Hearne, TX
Mfr: Groen
Model: DHT/1P-40
Certified By Groen:A Dover Industries Company Jackson, MS. 39212 1996-3, Model:DHT/1P-40, Serial No: 43443. Type Of Gas: NAT, Input Rate: 100.000 B.T.U./HR, Manifold Gas Press: 3.5 Inches W.C. Volts: 115, Hz: 60, PH: 1, Amps: 1. Intend for other than household use. Suitable for installation on both Non Combustible and ...more
Ariel #JGE/2, compressor, s/n F-9997
Collicutt Energy Services | Red Deer, AB
Category: Gas Compressors
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Ariel
Model: JGE/2
Ariel JGE/2 compressor, s/n F-9997, rpm- 1400, Cylinder 1 13", s/n C-32287, MAWP 300 psig, 4 1/4 stroke, 1500 rpm, Cylinder 2 9 3/4", s/n C-27113, MAWP 635 psig, Call for pricing.
Cleaver Brooks #CB-700-030, Steam Boiler, Natural Gas, 1255000 BTU/hr., 2009
C3 Surplus LLC | Miami, FL
Category: Firetube Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB-700-030
Year: 2009
Used Cleaver Brooks Steam Boiler, Approx 1,035 steam lbs/hr, 1,255,000 BTU/hr, Model CB 700-30,30 HP, MAWP 15 PSI, Fuel Natural Gas, Boiler Weight 3,650 lbs, Built 2009, Year Manufacture: 2009, Horsepower: 30 HP, Model: CB 700-030-015, Heating Capacity: 1,255,000 BTU/hr, Steam Capacity: Approx. 1,035 pounds per hour ...more
Ameri-Cure, heated paint booth, 10 HP motor, gas-fired heating, lit interior, Control panel
Machinery Max | Punta Gorda, FL
Category: Booths, Paint and Powder
Seller: Machinery Max
Location: Tacoma, WA
Mfr: Ameri-Cure
Make, Ameri-Cure, Model, Serial Number, 35408, Year, Phase, 3 PHASE, Voltage, 230 VOLT, Estimated Dimensions, See photos and, Estimated Weight, See photos and, Seller Comment, Buyer responsible for disassembly, packing and load out., Load Fee, Lot Notes, Onsite Contact, David Sizemore, (253) 279-8439, Pick Up ...more
Bowen, Fluid Bed Dryer, Stainless Steel, 18" diameter x 4' bed chamber, direct gas fired, 2 HP
Machinery & Equipment Co | Brisbane, CA
Category: Fluid Bed Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bowen
Dryer, fluid bed, Bowen, stainless steel, 18" diameter x 4' bed chamber, lab size, direct gas fired, complete unitized system including 2 HP Buffalo infeed blower, firebox, exhaust to stainless steel cyclone to 2 HP Buffalo draft blower, complete with control panel with 3 temperature probes. Unit can be converted ...more
width E Plemons #Bliss, automatic, bliss box former, hot melt glue sealer, 10-35 boxes per minute, (2) gun hot melt glue system
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: W E Plemons
Model: BLISS
W E Plemens Model Bliss, automatic, bliss box former, hot melt glue sealer rated from 10 to 35 boxes per minute – depending on material and application. Case size range: 9-1/4" to 31-7/8" in Length; 8" to 20" in Width; 4" to16" in Height. 36" long top blank case magazine, 4 ...more
3000 lb. Hyster #S30XM, LP gas forklift, 192" lift height, 3 stage mast
Vander Ziel Machinery Sales | Alto, MI
Category: Forklifts
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Hyster
Model: S30XM
Hyster 3,000 lbs. Lift Capacity Forklift, Model S30XM, Serial # C010H02653T, Asset # 16322, Lift Capacity at 24” Load Center 2,850 lbs., Mast Type 3 Stage, Mast Height 7’, Approximate Lift Height 16’, Fuel Type LP Gas, Fork Length 48”, Tire Type Hard, Hours 7,842, Weight 6,100 lbs., Preliminary ...more
Frick XJS120S, Rotary Bare Screw Compressor, 3600 RPM, 400 psig, 2003
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: XJS120S
Year: 2003
Frick Bare Screw Compressor: Model: XJS120S, Serial No: 10241K31932962. Max Allowable Pressure(PSIG): 400. Max Speed(RPM): 3600. Year of Manufacture: 2003. CFM @ 3550 RPM: 292. Screw Size(in): 1/2 or 5/8.
200" acfm Busch #Mink- MM-1322-AP, 16.9-28.6 hp, Dry Claw Compressor, 29 psig, 3600 RPM, 2" NPT gas outlet
Lenmark Industries | Langley, BC
Category: Vacuum Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Busch
Model: MINK-
SKU: 102101, Model: MM-1322-AP, Condition: Used, Dimensions: 26.10 (H) x 20.30 (W) x 54.00 (L) inches, Additional :, Volume Flow (at inlet): 200.0 ACFM, Overpressure: 29PSIG, Nominal Motor Rating: 16.9-28.6HP, Nominal Motor Speed: 3600RPM, Noise Level (ISO 2151): 85dB(A), Gas Outlet: 2"NPT, Volume: 320/380 m3/h ...more
Howden #MK4C/WLVB-255/22026/215, Compressor, screw type, 250 Ton/day, 52 GPM, 350 HP, 3562 RPM, 4160 V
Machinery & Equipment Co | Brisbane, CA
Category: Gas Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Howden
Model: MK4C/WLVB-255/22026/215
Howden compressor, screw type #MK4C/WLVB-255/22026/215. "Forced flow type compressor", last used in nitrogen reliquefication plant for super conducting magnet, 250 ton per day, 52 GPM, contract JH1355, complete with Westinghouse 350 HP, 3562 RPM, 3 phase, 60 cycle, 4160Volt, frame #5009-h induction motor, manufactured ...more
500 HP Frick #RWB-II-496V, Rotary Screw Compressor Package, 350 psi, 3570 RPM, 60 Amp., 4160 V., 60 Hz, 3-Ph.
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWB-II-496V
Frick RWB Series Rotary Screw Compressor Package. Model: RWB-II-496V. Serial No: S0054QFMPTVEA03. Frick Sales Order: 26625701000. Refrigerant: R-717. Max Design Pressure: 300. Frick Bare Screw Compressor - Model: TDSH355S, Serial No: 0086L, Refrigerant: R-717/R-22, Volume Ratio: 2.2-5.0, Max Speed RPM: 3600, Max ...more
Featured
6000 psi, Bauer #DDTR260-E3/D, (K18.1 pump) 20 cu.ft., 20 HP, 23 HP Diesel & 20 HP Electric Power, 2004
American Airworks | Sophia, WV
Category: Reciprocating Type Air Compressors
Seller: American Airworks
Location: Penn Run 15765, PA
Mfr: Bauer
Model: DDTR260E3/D
Year: 2004
We have a 2004 Bauer K18.1 (DDTR260-E3/D) 6000 PSI 20 CFM breathing air compressor, 23 HP Lister-Pedder diesel/20 HP electric 3 phase motor, mounted to a Bauer skid, with four 6000 PSI 510 CF air storage cylinders under chassis, with auto cascade refill from storage cylinders, P2 filtration w/Securus, electronic CO ...more
95 HP Gardner Denver #SSHG99D, screw compressor, 1-stage, 1800 RPM, Caterpillar G3304, 2001
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Lloydminster, AB
Mfr: Gardner Denver
Model: SSHG99D
Year: 2001
For sale: A 2001 SSHG99D model screw compressor by Gardner Denver, featuring a maximum horsepower of 95 and rated RPM of 1800. This portable unit is driven by natural gas and designed for sweet service applications. It comes with a Jiro Compression packager and is housed in a heated building, measuring 20' L x ...more
350 HP FES 270R, Rotary Screw Compressor Package, 460 V, 3600 RPM, 313 psig, 1999
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Fes
Model: 270R
Year: 1999
Used FES 270R Rotary Screw Compressor package with a Toshiba 350 HP Motor and FES Micro III Micro Panel. Package : FES Contract No: 99628031, Model No: 270R, Serial No: 99628031. FES Bare Screw Compressor: Model: 270R, Serial No: MK3D-132, Hydraulic Test Pressure: 470 PSIG, Max Design Working Pressure: 313 PSIG. Max ...more
200 HP FES 3160GM, Rotary Screw Compressor Package, 230/460 V, FES Micro III Control Panel
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Fes
FES rotary screw compressor package. Model: 160GM. Serial No: 00135011. FES Contract No: 00135011. Certified by FES Systems Oil Separator: National Board: 11410. MAWP: 300 PSI @ 500 F. MDMT: -20 F @ 300 PSI. GEA/FES Micro III Control Panel. Ram High-Efficiency Motor: HP: 200, Volts: 230/460, RPM: 3570, Ph: 3, Hz: 60.
203 HP Frick #XJF151N0793NZ, screw compressor, 1-stage, 1800 RPM, Caterpillar NG 102-9436, 2001
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Grande Prairie, AB
Mfr: Frick
Model: XJF151N0793NZ
Year: 2001
Available for sale: A 2001 Air-X-Hemphill screw compressor, model XJF151N0793NZ. This portable unit s a natural gas driver with a maximum horsepower of 203 and operates at a rated RPM of 1800. It is housed in a trailer-mounted configuration ideal for various applications. The compressor is designed for sweet service ...more
Caterpillar GP25N, Material Handlers Demolition, 1623 hours, S/N: AT35A21099, 2023
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Arm Attachments
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: GP25N
Year: 2023
**RED TAG SPECIAL**
- Foley Work Ready -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 42" FORKS, 5000LB CAPACITY, LED WORK LIGHTS, LP GAS / GASOLINE, NON-MARKING TIRES, Online Owner's Manual, P5000.
30" width x 144" H Vertical Kiln / Furnace, 1MM BTU/hr, 900 lb/hr, Natural Gas
Machinery & Equipment Co | Brisbane, CA
Category: Kilns
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Year: 1992
Vertical kiln / furnace, 30" id x 12' high chamber, thermo processor, rated at 1 million BTU per hour, 900 pounds hour discharge capacity. Unit last run as ceramic bond processor on clay and heavy metals waste material. Vertical kiln is top fed, complete with combustion air blowers, gas train and controls. Unit ...more
95 HP Gardner Denver #3A219-235G11, screw compressor, Caterpillar G3304NA NG engine, 2-stage, 2002
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Lloydminster, AB
Mfr: Gardner Denver
Model: 3A219-235G11
Year: 2002
Available for sale is a 2002 SSHG99D model natural gas screw compressor by Gardner Denver, featuring a maximum horsepower of 95 and designed for sweet service. This unit has been housed and is portable, making it suitable for various applications. It includes a G3304NA model engine and operates at two stages. The ...more
Ermaksan #Fibermak-Raptor, 2000 watt, 120" X, 61" Y, 6" Z, Beckhoff CP6242, 2020
Manufacturing Solutions | Santa Ana, CA
Category: CNC Lasers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermaksan
Model: FIBERMAK-RAPTOR
Year: 2020
15" Touch Screen Controller, IPG YLR 2000-Compact Power Supply, Precitec Lite Cutter Cutting Head, 1 G High Speed Acceleration, Proportional Gas & Piping System, Gas & Air Control, Shuttle Table, Slug Conveyor, Suction System, Machine & Operator Safety System, Chiller, Dust Collector, CAD/CAM Software ...more
JUST ADDED!
200 Ton, Arctic Cool #ACAS200BB12F, Air-Cooled Outdoor Chiller, R-134A, (2) Bitzer compressors, (12) 3.5 HP fans, 250 psi, 460 Volts, 3PH
Lenmark Industries | Langley, BC
Category: Chillers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Arctic Cool
Model: ACAS200BB12F
SKU: 138387, Model: ACAS200BB12F, Condition: Surplus New, S/N: AC1804878, Additional :, Chiller, Nominal Capacity: 200 Ton, Design Conditions: Fluid = 30% propylene glycol at 42F and 52F RWT, Flow: 526 GPM @ 9.07 P.S.I.P.D., Rated Power Supply, For 575 Volts 3-Phase:, - FLA: 280 / MCA: 310 / MOCP: 400A, For 460 Volts ...more
Hotsy #35700 Series, Natural Gas pressure washer, 8 GPM @ 3000 psi, 657000 BTU/hr, 15 HP, 480 V.AC, 3 phase, 60 Hz
Peterson Machinery Sales | Casa Grande, AZ
Category: Pressure Washers
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Hotsy
Model: 35700
(1) Used Hotsy Model 5735 - 3 Series Pressure Washer, S/N.72833, Pump.8 GPM, 3,000 psi, BTU/hr.657,000, Fuel Source.Natural Gas, Nozzle Size., Motor Output.15 HP, Electrical Characteristics.480 VAC / 3 Phase / 60 Cycle, Approx. Overall Dimensions.66 1/2" L x 34 1/2" W x 51" H, Weight., F.O.B.Casa Grande, AZ.
22 GPM VICKERS #PVH-79, 71 120 Hydraulic Oil Transfer Pump 71 HP, 120 m3/d
IronHub | Calgary, AB
Category: Oil Transfer Pumps
Seller: IronHub
Location: Lloydminster, AB
Mfr: Vickers
Model: PVH-79
Year: 2007
Available for sale is a 2007 VICKERS Oil Transfer Pump, Model PVH-79, featuring a durable 5.7L engine driven by natural gas. This portable pump has a maximum horsepower of 71 and operates at a rated RPM of 1800. With a capacity of 120 m3/d, it is designed for hydraulic applications. The unit is currently disconnected ...more
Titan #TA-122-NG-HRV-DA, Natural Gas Air Makeup Unit, 16000 CFM, 1584000 BTUH, 480 V., 2023
Revelation Machinery | Chicago, IL
Category: Paint and Powder Accessories
Seller: Revelation Machinery
Location: Chicago, IL
Model: TITAN #TA-122-NG-HRV-DA
Year: 2023
Make: Titan, Model: TA-122 NG HRV DA, Year: 2023, Machine Location: Massachusetts, Gas Train/Burner :, – CFM: 16000, – Temp rise F: 90, – Max temp rise F: 110, – Max disch temp F: 160, – Max BTU/HR Max: 1,584,000, – Min BTU: 63,360, – Gas pressure: 2# – 5# @ 1584 CFH ...more
300 HP Frick #RDB-399B, Rotary Screw Compressor, 3600 RPM, 400 PSIG, 2008 Rebuilt 2016
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RDB-399B
Frick Rotary Screw Compressor Package: Model: RWB-II-100B, Serial No: S0513LFMFTHAA3, Frick Sales Order: 2806340-01, Refrigerant: R717, Max Speed RPM: 3600, Max Design Pressure: 300 PSIG. Frick Bare Screw Compressor: Model: TDSH193S, Serial No: 1711C, Volume Ratio: 2.2-5.0, Max Speed RPM: 4500, Max Design Pressure: ...more
Miller #Spectrum 750, Plasma Cutter, 575 V., 21kVA Output, 5.9 CFM @ 64 PSI Plasma Gas Flow
N S Machine Corp. | Granger, IA
Category: Plasma Cutters/Punches
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Miller
Model: SPECTRUM 750
, Manufacturer: Miller, Model Number: Spectrum 750, Serial Number: KB077305, Stock Number: 13853, s:, Type of output — Direct current, Straight Polarity (Electrode negative), Rated output — 70 amperes, 120 Volts DC @ 60% duty cycle, Type of input power — 3-phase; 230, 460 or 575 Volts AC; 60 Hz ...more
27 HP Rotorcomp #NK60, screw compressor, Sunfab Hydraulics M012WH-B4KU, 2007
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Vermilion, AB
Model: NK60
Year: 2007
For sale: a 2007 Rotorcomp NK60 screw compressor with a maximum horsepower of 27 and rated RPM of 4800. This portable unit s hydraulic drive and is housed for protection. It is designed for sweet service applications and comes from Sunfab Hydraulics. The operational status is connected, ensuring reliable performance. ...more
500 HP Sullair, Rotary Screw Compressor Package, 300 psi @ 250°F, 3555 RPM, 63 Amp., 4160 V., 60 Hz, 3-Ph.
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Sullair
Sullair Corporation Screw Compressor Package.Part No: 254339-001. Serial No: 007-96000327. Type: High Stage. Refrigerant: Ammonia. Certified Nills Steel Oil Separator - National Board: 28554, Max Design Pressure: 300 PSIG, Max Temperature: 250 F, Serial No: 45874.
Ariel #JGD/6, 3555 HP, 1000 RPM, Six Throws, 5000 PSI, 10 MMSCFD, Caterpillar G3612
Integrated Energy Networks Llc | Dade City, FL
Category: Gas Compressors
Seller: Integrated Energy Networks Llc
Location: Dade City, FL
Mfr: Ariel
Model: JGD6
Surplus/ Never used or installed Natural Gas Compressor Set with a CAT G3612 LE with HP: 3555 + Ariel JGD/6, 5000 PSI, 10 MMSCFD, Harsco Cooler, Murphy Control Panel, Filter ProStar. Complete compressor set manufactured by Exterran (Now Enerflex) in 2015, This compressor set was kept in its original packing boxes and ...more
Tamrotor #3424648, screw compressor, 1-stage, 1800 RPM, Arrow VRG-330, 2001
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Breton, AB
Model: 3424648
Year: 2001
Available for sale is a 2001 F.W. Murphy VRG-330 screw compressor with a maximum allowable working pressure (MAWP) of 230 psi and rated at 1800 RPM. This compact, trailer-mounted unit s a Tamrotor compressor type, perfect for sweet service applications. It includes a housed design with dimensions of skid width: 5 ft ...more
84 HP Tamrotor #Enduro-25, screw compressor, 1-stage, 1800 RPM, Cummins G5.9C, 2005
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Fox Creek, AB
Model: ENDURO-25
Year: 2005
Available for redeployment, this portable Cummins G5.9/GD ENDURO 25 Compressor Package s a maximum horsepower of 84 and operates at a rated RPM of 1800. Manufactured in 2005 and a screw compressor from TAMROTOR, this unit is suitable for sour service applications. It has an operational status marked as disconnected ...more
500 HP Frick RWB-II-222, Rotary Screw Compressor Package, 4160 V, 300 psig, Missing Control Panel, 1994
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWB-II-222
Year: 1994
Frick RWB-II-222 Screw Compressor (less screw) - 500HP. Serial # SO442NFMPTHBA3. TECO Motor 500 HP, 4160 Volts, 109/60.3 AMPS 3570 RPM, Bearings: 6314C3/6314C3. Purchased from Seaboard Foods Pork Plant in Oklahoma, USA.
Caterpillar GP25N, Material Handlers Demolition, 536 hours, S/N: AT35A10323, 2021
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Arm Attachments
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: GP25N
Year: 2021
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 42" FORKS, 5000LB CAPACITY, LED WORK LIGHTS, LP GAS / GASOLINE, NON-MARKING TIRES, Online Owner's Manual, P5000 2021.
14" x 78" Gioria #RH/N2000, cylindrical grinding machine, coolant, dwell grinding cycle, plunge grinding cycle, forward/reverse
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Gioria
Model: RH/N2000
SERIAL.: 98592, MODEL.: RH/N-2000, MAX ROLL DIAMETER.: 14", MAX ROLL LENGTH.: 78", WORKHEAD SPEED.: VARIABLE, WORKPIECE MOTOR SPEEDS.: 2, WHEELHEAD RAPID.: FORWARD AND REVERSE, WHEEL TABLE RECIPROCATION.: YES, PLUNGLE GRINDING CYCLE.: YES, DWELL GRINDING CYLE.: YES, COOLANT YES.: YES, Machine Type.Grinders ...more
Caterpillar GP25N, Material Handlers Demolition, 619 hours, S/N: AT35A21019, 2023
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Arm Attachments
Seller: Foley Equipment - Heavy Machinery
Location: Olathe, KS
Mfr: Caterpillar
Model: GP25N
Year: 2023
;- Foley Work Ready -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 42" FORKS, 5000LB CAPACITY, LED WORK LIGHTS, LP GAS / GASOLINE, NON-MARKING TIRES, Online Owner's Manual, P5000 2021.
GMC #PL-18E, 18 gauge Gmc, Pittsburgh attachment, PF-18E power flanger, DCR-18E drive cleat roll, DSR-18E double steam roll
Manufacturing Solutions | Santa Ana, CA
Category: Rollformers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: PL-18E
, Standard Pittsburgh Attachment # PA-18ESlip & Drive Roll (S & Drive)# SDR-18EDrive Cleat Roll # DCR-18EDouble Seam Roll # DSR-18EPower Flanger # PF-18EISO 9001 certified3HP Heavy Duty AC main motor, 220V, 3 phaseHeavy welded all steel construction for maximum rigidityIt’s a Triplex, standard rolls ...more
JUST ADDED!
100 KW Telgen, Nat Gas LP Generator, 1 & 3PH, PSI 5.7L, New
Quantum Technology | Shippensburg, PA
Category: Natural Gas Or Dual Fuel Generators
Seller: Quantum Technology
Location: Shippensburg, PA
8-12 Week lead time. Call for current lead times.Engine & Generator MechanicsThe unit uses a 5.7L Turbo Charged - Air Cooled (TCAC) engine. Operating at 1800 RPM is standard for 60Hz power generation, ensuring a stable frequency for sensitive equipment.Compression Ratio: 9.4:1 (optimized for natural gas ...more
250 HP GEA N-5, Rotary Screw Compressor Package, 460 V, 4500 RPM, 406 psig, 2003
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Gea
Model: N-5
Year: 2003
GEA N-5 screw compressor powered by a 250 HP, 460 Volts Toshiba 3-phase induction motor. The package also includes a Frick Quantum LX Series control panel as well an FES Certified oil separator.
150 HP Howden WRV-255, Rotary Screw Compressor Package, 230/460 V, 300 psig
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Howden
Model: WRV-255
M&M Refrigeration rotary screw booster compressor package featuring a Howden brand compressor. M&M model no.: H146BL-185. Mfg. no.: 99M-090-0100A. X no.: WRV255. Max working pressure: 300 PSIG (compressor). Ram Industries High Efficiency Motor: 150 HP, 230/460V, 3-phase, 60 Hz. M&M micro control panel. ...more
200 HP GEA 575B-LE, Rotary Screw Compressor Package, 460 V, 3575 RPM
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Gea
Model: 575B-LE
GEA FES 575B-LE 200HP Rotary Screw Compressor including Micro and Starter Package & Screw: GEA FES 575B-LE, Serial#: 2512202, Leak: 313 Screw Hours: Motor: Siemens-Allis Induction Motor - Made in USA. 200HP, 226 Amps, 460v, 3 Phase, 60 Hz, 444TS, Serial: 51-348-096-0028-4 Previous Refrigerant: R717 Ammonia Click ...more
Hycomp #2AN35D-H3321-BLMV A10-20/10T, Nitrogen Gas Compressor, 16 scfm, 95 psi discharge, 85 F, 70 percent humidity, 30 & 90 gallon receiver tanks, 5 HP
Machinery & Equipment Co | Brisbane, CA
Category: Gas Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hycomp
Model: 2AN35D-H3321-BLMV A10-20/10T
Hycomp nitrogen gas compressor, Model 2AN35D-H3321-BLMV A10-20/10T, serial number 100103-502, Unused and in excellent condition. Rated for 16 SCFM, 0 PSI inlet, 95 PSI discharge, Air cooling at approximately 85 degrees Fahrenheit, Very High Purity, 70% humidity. Includes NEMA 1 Electrical Class control panel. Complete ...more
800 HP Frick RWB-II-316, Rotary Screw Compressor Package, 3600 RPM, 300 psig
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWB-II-316
Frick RWB-II-316, 600HP Rotary Screw Compressor including Micro and Starter Screw: Scew compressor tag is missing Screw Hours: Package: Serial# S0178LFMCLCAA3, Frick Sales Order 280662-01, Max RPM 3600, Max PSIG 300. Motor: Ram Industries High Efficiency, 600 HP, 3560 RPM, ODP Enclosure, 507USS Frame, 460 Volts, 650 ...more
250 HP Frick #RDB-316, rotary screw compressor, R-717 refrigerant, 150 psig, 3600 RPM, 2300/4160 V.
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RDB-316
Frick RDB Rotary Screw Compressor Package. Model: RDB-316. Serial No: S0052JFEFLHAA3. Frick Sales Order: 263504-01. Refrigerant: R-717. Max Speed(RPM): 3600. Refrigerant:R-717(Ammonia). Max Design Pressure: 150 PSIG. Frick Bare Screw Compressor - Model: TDSL283S, Serial No: 0073GG. Refrigerant: NH3/R22. Volume Ratio: ...more
Caterpillar #G398NA, Natural Gas engine, rebuilt
Martin Energy Group Svcs | Tipton, MO
Category: Natural Gas Engines
Seller: Martin Energy Group Svcs
Location: Ephrata, PA
Mfr: Caterpillar
Model: G398NA
Caterpillar Natural gas engine model G398NA, High Compression, 10:1, Serial 73B00573, Rebuilt by Martin Energy Group, Ephrata PA, New bearings are trimetal, ideal for sour gas, biogas applications, New Cylinder Kits, IPD brand, New main bearings, STD, Trimetal – AL, NI & STL, New rod bearings, STD, Trimetal ...more
Kramer CTT10300M44-G, Thermobank Condensing System, 3 ton, R134A, 180/450 psig, 2000
Genemco | Hearne, TX
Category: Air Cooled Condensers
Seller: Genemco
Location: Hearne, TX
Mfr: Kramer
Model: CTT10300M44-G
Year: 2000
Unused 2000 Kramer Industries CTT Thermobank Condensing System- 3 Ton. Model: CTT10300M44-G. S/N: M0078212-011. Refrigerant: R-404A. Design pressure lo/hi: 180/450 psig. Copeland Copelametic Screw Compressor, 3 hp, 380-400/460 V, 5.8 RLA, 41.0 LRA, 50/60 Hz, 3 phase. M-series medium temp version for saturated suction ...more
York #SAB128HF, Rotary Compressor, R717, 25 bar, 2950/3550 max speed, 455/548 max swept volume, 2000
Machinery & Equipment Co | Brisbane, CA
Category: Gas Screw Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: York
Model: SAB128HF
Year: 2000
York Rotary Compressor, Model SAB128HF, Shop Number 118562 - Operates with R717 refrigerant, rated for up to 25 bar pressure with maximum speeds of 3550 RPM and swept volumes of 455/548. Manufactured in 2000., Basis: FOB, Refrigerant: R717, Pressure: 25 bar (362 PSI).
10000 lb. Hyster #S100XL, LP gas forklift, 208" lift height, 3-mast, side shift, 5117 hours, 42" forks, hard tire
D & D Industries Inc | Monclova, OH
Category: Forklifts
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Hyster
Model: S100XL
ORDER 10000, 10,000 LB MAX LIFT, 208" MAX LIFT HEIGHT, TRIPLE MAST, LP GAS, SIDE SHIFT, 5117 HOURS, HARD TIRE, ROLL OVER PROTECTION SYSTEM, 42" FORKS, 160" X 56" X 100" T APROX., 16,020 LBS APROX..
22 GPM BWM #K3VL-80, 84 120 Hydraulic Water Transfer Pump 84 HP, 120 m3/d
IronHub | Calgary, AB
Category: Oil Transfer Pumps
Seller: IronHub
Location: Lloydminster, AB
Mfr: Bwm
Model: K3VL-80
Year: 2011
Available in Lloydminster, AB, Canada, this portable water transfer pump s a BWM K3VL-80 model with a maximum horsepower of 84 and operational status connected. Built in 2011, it is driven by natural gas and has a rated RPM of 1800. The pump capacity is rated at 120 m3/d. While it does not come with a warranty, it is ...more
500 HP Smith Hughes #RT-500A, RENTAL, 250 psig, 17250 pph, Natural Gas, #2 Fuel oil fired, low NOx, firetube steam boiler, trailer enclosed
Smith Hughes Co | Cincinnati, OH
Category: Firetube Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RT-500A
Year: 2024
RT-500A Mobile Boiler Room, 500 HP, 250 PSIG, Natural Gas, No. 2 Fuel Oil Fired, Complete boiler room package is designed to be placed in service at customer specified location with minimal, on-site work., INCLUDES:, • 45' Enclosed Container and Chassis, • (1) 500 HP Superior firetube steam boiler ...more
700 HP FES 575B/250L, Rotary Screw Compressor Package, 2400/4160 V, 250 psi, 1670 CFM
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Fes
Model: 575B / 250L
FES 575B / Mycom 250L Screw Compressor Package - 700 HP. Model: 575B / 250L. S/N: 2512826. Electric motor, 700 hp, 3575 rpm, 2400/4160 V, E.L. Nickel oil separator, MAWP: 250 psi. Mycom Mypro-M control panel. Displacement: 1,670 cfm. Overall dimensions: 13 ft. L x 5 ft. 3 in. W x 8 ft. 2 in. H.(H4)(SR250) (ACN950).CF.
200 cfm, 100 psi, Van Air #RA-2001950, refrigerated air dryer
D & D Industries Inc | Monclova, OH
Category: Refrigerated Compressed Air Dryers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Van Air
Model: RA-2001950
200 CFM @ 100 PSI, 1 HP COMPRESSOR, RLA 4.2 LRA 34, FAN HP 26W, FLA 0.86, R-12 REFRIDGERANT 6 LBS, HIGH SIDE TEST 235 PSIG, LOW SIDE TEST 150 PSIG, MAX AIR SIDE W.P. 200 PSIG, AIR SIDE TEST PRESS 300 PSIG, 1 HP 460, 3'X3'X3' 1000 LBS.
400 HP Cleaver-Brooks #CB200-400, High Pressure Steam Boiler, Natural Gas/Oil, 150 psi, 1673800 BTU/hr., 1973
C3 Surplus LLC | Miami, FL
Category: Firetube Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB200-400
Year: 1973
Used Cleaver Brooks Steam Boiler 13,800 steam lbs/hr, 1,673,800 BTU/hr, Model CB 200-400, 400 HP, MAWP 150 PSI, Fuel Natural Gas, Serial No L-55764, Boiler Weight 36,500 lbs, Built 1973. Tube are in good share, Year Manufacture: 1973, Horse Power: 400 HP, Design Pressure: 150 PSI, Steam Capacity: 13,800 pounds per ...more
215 cfm, 125 psi, Ingersoll-Rand #UP6-50PE-125, Rotary Screw Compressor, 50 HP, 575 V., 3PH, 53250 hours
Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Ingersoll-Rand
Model: UP6-50PE-125
SKU: 122586, Model: UP6-50PE-125, Condition: Used, S/N: PG3185U07031, CFM: 215 cfm, Compressor Air Type: Rotary Screw, Power Type: Electric, Max. Pressure: 125 psi, Mount: Skid Mounted, History :, Hours: 53,250, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 53.00 (H) x 52.00 (W) x 70.00 (L) inches.
JUST ADDED!
5' width x 6' L x 6' D Gas-Fired Car Bottom Furnace, 650°F, 480 V., 3-phase, Allen Bradley Powerview 550 controller, Barber Coleman 560A controller
Heat Treat Equipment Co | Canton, MI
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: Unknown, Type: Gas-Fired Car Bottom Furnace, Working Dim’s: 60” wide x 72” deep x 72” high, Max Temp: 650°F, Heated: Gas-fired, Power: 480 Volts / 3-Phase / 60 Hz, Controls:, Allen Bradley Powerview 550 Controller, Barber Coleman 560A Controller.
200 HP Frick RWB-II-270B, Rotary Screw Compressor Package, 460 V, 3600 RPM, 300 psig
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWB-II-270B
FRICK Low Stage Screw Compressor Model # RWB II-270B S/N: S0058RFMCTOAA03 Sales order#: 21122701000. Screw Model #: TDSH233XL0094FL. Separator National Board #136616 Thermo-siphon National Board #136618. Volume Ratio: 2.2/5.0, Ram Industries SWITCHGEAR PANEL, TOSHIBA, 200 HP Frame 444TS, Volts 460 3 Phase, 235 amps ...more
Vilter #VSM501, refrigeration screw compressor package, ammonia halocarbon, 502 cfm
Aaron Equipment Co | Schaumburg, IL
Category: Gas Screw Compressors
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Vilter
Model: VSM501
used- vilter vsm501 refrigeration screw compressor package. motor turns over. refrigerant: ammonia halocarbon complete with: pallarex sliding system compressor 502cfm vision microprocessor (no touch screen) pressure transducers ultra fine oil filter optional oil pump optional oil cooler intelligent oil switch shipping ...more
Featured
18" width x 18" H x 36" L AVS, MIM / DEBIND, 1600°C, Moly hot-zone, AG N2 & H2, refurbished
AVS Inc | AYER, MA
Category: Annealing Furnaces
Seller: AVS Inc
Location: Ayer, MA
Mfr: Avs
• Horizontal Vacuum Debinding/Sintering Furnace for MIM Parts, processed in a single batch load, • All stainless steel Chamber, front and back doors, automatic clamps, • Metal Hot Zone, removable, with MLS/molybdenum shields and tungsten heaters, • Moly retort with shelf supports, MLR shelves and ...more
96" width x 72" H x 72" L Precision Quincy, Class A, Gas Fired, 450°F
Hi-Heat Co | South Windsor, CT
Category: Walk-in Type Ovens
Seller: Hi-Heat Co
Location: South Windsor, CT
Mfr: Precision Quincy
Year: 2013
Precision Quincy walk-in oven, 96"W door opening x 72"H x 72"L work area, 450F, gas fired (500,000 BTU), model HD4G-806-6TPF, aluminized steel interior with steel plate floor, horizontal air-flow (5 HP recirculating fan), Watlow F4 programmable temperature control, powered exhaust fan, solvent rated (Class A oven) ...more
Blow Molder #KM4A-2L, High Pressure Compressor System, 5500 BPH
Machinery & Equipment Co | Brisbane, CA
Category: Plastic Blow Molders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blow
Model: KM4A-2L
Automatic 4-Cavity Blow Molding Machine, Model KM4A-2L, rated for 5500 bottles per hour output, powered by PLC and HMI system. Includes Parker high-pressure blowing valve, SMC Pneumatic cylinder, Omron sensors, and Schneider low-voltage electric components. Offered with Preform Unscrambler and 120 ML Blowing Mold ...more
95 HP Howden #J01521, screw compressor, 1-stage, 1800 RPM, Caterpillar 3304, 1997
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Breton, AB
Mfr: Howden
Model: J01521
Year: 1997
Available for sale is a 1997 Air-X-Changers screw compressor with a maximum horsepower of 95. This model, J01521, s a single stage and one throw. It operates at a rated RPM of 1800 and is designed for sweet service applications. The unit has been housed and is portable, measuring 20 ft in length and 10.5 ft in width. ...more
3 Fans, Vilter SC-24-64-1/2-RA-HGF, Ammonia Evaporator Coil - 11 TR, Low Temperature, 3 HP, 15000 CFM, 625 FPM
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Vilter
Model: SC-24-64-1/2-RA-HGF
Vilter SC 24-64-1/2-RA-HGC Ammonia Evaporator Coil- 11TR 3 Fans (Low Temperature) This evaporator Coil uses Low Temperature frosted coils. A capacity of 9060 (BTUH / F TD) and an estimated tonnage of 11(TR) @15TD. An Airflow of 15000 CFM and a face velocity of 625 FPM. Direct Expansion top fed coils with a gas defrost ...more
72" width x 396" L x 24" H Surface Combustion #1706-04, roller hearth furnace, 1000°F
Heat Treat Equipment Co | Canton, MI
Category: Roller Hearth Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Category: Roller Hearth Furnace, Type: Gas-Fired Radiant Tube Atmosphere, Model Number: 1706-04, Heating: Natural Gas, Power:460 V / 3-Phase / 60Hz, Working Dim’s: 72” wide x 24” high x 33’ heated length, Maximum Temp: 1000°F, Controls:, Free-standing ...more
JUST ADDED!
1500 KW Caterpillar #Power-Pac, Natural gas generator set, 2175 HP @ 1800 RPM, G3516C engine, sound attenuated enclosure, electronic governor, 2019 (2 available)
Worldwide Power Products | Houston, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: Worldwide Power Products
Location: Houston, TX
Mfr: Caterpillar
Model: POWER-PAC
Year: 2019
Engine Information Engine Manufacturer:Caterpillar Engine Model:G3516C Engine S/N:N6R00157 Engine Arrangement:5062891 Engine RPM:1800 Engine HP:2175 Governor:Electronic Starter:Electric Cooling Method:Radiator Engine Pre-lube:Electric Compression Ratio:11:3 Flywheel Size:SAE00 Dual Fuel Capable:✓ Jacket Water ...more
Carrier, Stainless Steel fluid bed dryer, 70" W x 30' L dryer bed, includes rotary valve discharge, 1998
Perry Videx LLC | Hainesport, NJ
Category: Fluid Bed Dryers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Carrier
Year: 1998
Used Stainless Steel Carrier Fluid Bed Dryer. 69" wide x 29' long dryer bed. Serial #24429, new 1998. Includes rotary valve discharge. Includes gas fired burner and auxiliary 540 KW electric heat bank., 1998 CARRIER 70" x 29'.
Ariel #JGP-2, Compressor Frame, 4-3/4" bore, 3" stroke, 50 PSI, 1800 RPM, 1985
Collicutt Energy Services | Red Deer, AB
Category: Gas Compressors
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Ariel
Model: JGP-2
Year: 1985
Make: Ariel, Model: JGP-2, Condition: Used, Ariel JGP-2 Compressor Frame, Used, S/N: F-5438, Cylinder 1: 4-3/4" Bore, 500MAWP, S/N: C-7533, Cylinder 2: 4-3/4" Bore, 500MAWP, S/N: C-7534, CALL FOR PRICING.
JUST ADDED!
2 HP Husky #C304H, Portable Vertical Electric Air Compressor, 30 gallon, 175 PSI
Norman Machine Tool Ltd | Baltimore, MD
Category: Tank Mounted Air Compressors
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Husky
Model: C304H
Husky 30 Gallon 175 PSI Portable Vertical Electric Air Compressor, C304H, Inventory # 9855, Model: C304H, S/N: 2004181, Application Use:, Air Brushing, Blow Cleaning, Bolting, Brad Nailing, Cutting, Drilling, Finish Nailing, Framing Nailing, Hobby Nailing, Inflation, Roof Nailing, Stapling, Wrenching, Air Delivery @ ...more
Tri-Star #TSCV-1-1W-E, Convection Oven, 90000 BTU, 2x NG burners, double door, w/ racks, 120 V.
Federal Equipment Company | Cleveland, OH
Category: Cabinet Type Ovens
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: TSCV-1-1W-E
Used Tri-Star convection oven, model TSCV-1-1W-E, 90,000 BTUs, (2) natural gas burners, double door, with oven racks, 120 volts, serial# 993761507017.
6000 lb. Heli #CPYD30-KU1H, 3 Stage LP Gas Forklift, 185" Lift, 5" x 45" Forks, 2019
Bullseye Industrial Sales LLC | Middlebury, IN
Category: Forklifts
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Heli
Model: CPYD30-KU1H
Year: 2019
Condition: Used Brand: Heli Model: CPYD30-KU1H MPN: N/A Country of Manufacture: N/A Capacity (Kg/Lbs): 6000lbs Fuel Type: LPLP Tank Not Included Serial #: 230302F1725 Load Height: 185" Mast Number of Stages: 3 Tire Type: Solid Pneumatic Fork Size (Length x Width): 45" X 5" Hours: 2995 Safety Interlocks: Lights,Horn ...more
700 HP FES 575/250L, Rotary Screw Compressor Package, 2400/4160 V, 250 psi, 1991
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Fes
Model: 575 / 250L
Year: 1991
FES 575 / Mycom 250L Screw Compressor Package - 700 HP. Model: 575 / 250L. S/N: 2512853. Electric motor, 700 hp, 3575 rpm, 2400/4160 V. E.L. Nickell oil separator, MAWP: 250 psi. FES Micro II control panel. Vi setting: 3.6. Displacement: 1,670 cfm. Overall dimensions: 13 ft. L x 5 ft. 3 in. W x 8 ft. 2 in. ...more
90 HP Frick #XJF151M, screw compressor, Caterpillar G3304NA NG engine
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Edson, AB
Mfr: Frick
Model: XJF151M
Year: 2005
For sale is a 2005 Air-X-Hemphill natural gas compressor, model XJF151M, featuring a Frick screw compressor type with a max horsepower of 90. This unit includes a G3304NA driver and operates at rated RPMs efficiently. It comes with one stage and is designed for sweet service conditions. The compressor is housed ...more
12MM BTU Smith Hughes #RT-12MA, RENTAL, Thermal Fluid Heater/Hot Oil, 225 psi, 750°F, Vapor Power, Nat Gas/#2 fired, low NOx, trailer mtd
Smith Hughes Co | Cincinnati, OH
Category: Thermal Oil Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RT-12MA
RT-12MA, 12 MMBTU Thermal Fluid Heater, Natural Gas/No. 2 Fuel Oil Fired, Low NOx Burner (<30ppm), Drop Trailer with 12 MMBTU Thermal Fluid Heater unit is designed to be placed in service at customer, specified location with minimal on-site work., PACKAGE INCLUDES:, • 12 MMBTU Output Vapor Power Thermal Fluid ...more
18MM BTU Vapor Power #RT-18MB, RENTAL, Thermal Fluid Heater/Hot Oil, 225 psi, 750°F, Vapor Power, Nat Gas/#2 fired, low NOx, trailer enclosed
Smith Hughes Co | Cincinnati, OH
Category: Thermal Oil Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Vapor Power
Model: RT-18MB
RT-18MB, 18 MMBTU Thermal Fluid Heater, Natural Gas/No. 2 Fuel Oil Fired, Drop Trailer with 18 MMBTU Thermal Fluid Heater unit is designed to be placed in service at customer, specified location with minimal on-site work., PACKAGE INCLUDES:, • 18 MMBTU Output Vapor Power Thermal Fluid Heater, • Design ...more
































































































