AI-ranked results for 14 stand - closest matches first
16 Stand, Rollform Line #Wall-Panel-Line, 20000 lb. capacity, 6" - 46" Width, 20' discharge conveyor, 120 panels/hr., 180 HP, 2003
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Model: WALL PANEL LINE
Year: 2003
Width: 6" - 46" LINE INCLUDES: Upender/Coil Car Uncoiler Slitter/Straightener Unit Precision Feed Roll Unit Pre-Punch Press 16-Stand Rollformer Cut Off Press Discharge Conveyor, 20', 20,000#120 Panels per hour (10 ft Panels)180 HP140 ft x 20 ft.
10 Stand, Bradbury Duplex complete rollform line, 20000 lb., 20"-24" ID, 72" OD, L to R, 150 FPM, entry L type coil car, uncoiler with hold down roll, entry pinch rolls, 5 roll straightener, downlayer, exit conveyor
Galaxie Corporation | Wayne, MI
Category: Rollformers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Bradbury
, Max Coil Weight 20,000#, Coil ID 20-24", Max Coil OD 72", Line Orientation: Left to Right, Line Speed 150fpm, Complete Line with the Following Components:, Entry L-Type Coil Car, Uncoiler with Hold Down Roll, Entry Pinch Rolls, Five Roll Straightener, Hydraulic Punching Unit, Hydraulic Shear, Scissor Lift Conveyor ...more
12 Stand, Flagler #DF1, Duct Flange Machine, 18-26 Gauge Galvanized, 60 FPM, 7.5 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Rollformers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Flagler
Model: DF1
Flagler 18 Gauge 12 Station Duct Flange Machine, DF1, Inventory # 7729, Model: DF1, MPN # 35-000, Made in USA, Capacity: 18 – 26 Gauge Galvanized, Speed: 60 FPM (Optional 0 – 100 FPM), Motor: 7 1/2 HP, Standard s:, 12 Stations, 1 1/2″ Hardened and Ground Spindles, Hardened Feed Gauge, Rise/Fall ...more
18 Stand, Tru Tech, rollformer, 1-3/4" diameter spindle, 13" rollspace, 8" horizontal centers, 4"-6" vertical adj., 40" passline
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tru Tech
NUMBER OF STANDS. 18, DIAMETER OF SPINDLE. 1-3/4", ROLL SPACE. 13" (APPROX), HORIZONTAL CENTER. 8", BASE TO LOWER SPINDLE. 6", SPINDLE CENTERS. 4", VERTICAL ADJUSTMENT. 4" TO 6", PASS LINE HEIGHT. 40".
13 Stand, Bradbury, 3" arbor diameter, 6.5" vert.spacing, 18"-24" horiz.spacing, 1990, #69558
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury & Tishken
Year: 1990
YEAR. 1990, MATERIAL GAUGE. 30GA - 24 GA, NUMBER OF STANDS. 13, ARBOR DIAMETER. 3", ARBOR WIDTH. 44.5", VERTICAL SPACING. 6.5", HORIZONTAL SPACING. 18"-24" (VARIES), MOTOR. 350A/480V/3PH, LESS TOOLING, TOOLED FOR STANDARD CORRUGATION. 2-1/2", CUTOFF PRESS AVAILABLE. 65K (STOCK #69560), TOOLING SOLD SEPARATELY. 25K ...more
Get email updates for newly added Rollformers
Rollformers (also known as roll forming machines) are used to shape sheet metal or strips into continuous profiles by passing them through a series of rollers. Commonly used in industries like construction, automotive, and manufacturing, they are ideal for producing parts like roofing panels, beams, and tubing. Rollformers are essential for efficiently creating uniform, high-quality metal profiles in large-scale production.
4 Stand, Tishken #4-MW-2, rollformer, 2" arbor diameter, 10" roll space, 3/8" spindle keyway
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 4-MW-2
SERIAL. 16293-1176, MODEL. 4-MW-2, NUMBER OF STANDS. 4, ARBOR DIAMETER. 2", ROLL SPACE. 10", HORIZONTAL CENTERS. 12", UPPER SPINDEL ADJUSTMENT. 5-1/2" TO 7", BED TO CENTERLINE OF LOWER SPINDLE. 5", SPINDLE KEYWAY. 3/8".
10 Stand, Rafter #W1A, rollformer, 1-7/8" arbor, 10" roll space, forward/reversing, coolant, variable speed
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rafter
Model: W1A
SERIAL. 12354, MODEL. W1A, NUMBER OF STANDS. 10, ARBOR DIAMETER. 1-7/8", ROLL SPACE. 10", HORIZONTAL DISTANCE BETWEEN SPINDLES. 8", CENTER BOTTOM SHAFT TO BASE TOP. 4-1/2", VERTICAL SHAFT ADJUSTMENT. 4" TO 7", FORWARD & REVERSING. YES, COOLANT. YES, SPEED VARIABLE. ACTECH.
12 Stand, Tishken, rollformer, 1.5" shaft diameter, 8" roll space, 9" horizontal centers, 4"-8" vertical adj.
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
Tishken Rollformer, Model 12-HMW-1 1/2, -Number of Stands: 12, -Shaft Dia.: 1.500", -Roll Space: 8.00", -Horizonal Centers: 9.00", -Center of Bottom Spindle to Base: 4.500", -Vertical Adjustment: 4.00", -Adjustment Range: 4" to 8", -Less Drive Motor, -Overall Size: 142" L x 48" W x 47" High, -In Storage: Toledo, OH.
7 Stand, Jouanel #LFL16, rollformer, Pittsburgh bend, 4 HP, 2010
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Jouanel
Model: LFL16
Year: 2010
SERIAL. B1004002, MODEL. LFL16, YEAR NEW. 4/2010, CAPACITY STAINLESS. 0,6 - 0,8 MM, CAPACITY ALUMINIUM. 0, - 1,5 MM, CAPACITY STEEL 235JR. 0,6 - 1,5 MM, FORMING STATIONS. 7, BEND. PITTSBURG, FORMING SPEED. 15 (m/min), WIDTH OF SEAM (X). 13 MM, MOTOR HORSEPOWER. 4.
10 Stand, Yoder #M3-1/2, Rollformer, 10 passes, 3.5" spindle diameter, 19" roll space, 24" horizontal centers, R-L, 16.75:1, 100 HP, 1775 RPM, 260/130 amps, 220/440 Volts, 3PH
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Yoder
Model: M3-1/2
UTUBE NUMBER: 4212, MANUFACTURER: YODER, MODEL NUMBER: WH, SERIAL NUMBER: Y113862, Number of Passes: 10, Line Direction: Right to Left, Spindle Diameter: 3-1/2″, Roll Space: 19″, Horizontal Centers: 24″, Vertical Adjustment: 5″ – 12-1/2″, Base Top to Center Lower Spindle: 10″ ...more
32 Stand, Tishken #32-XHW-4, 4-1/2" spdl, 70" RS, Quantum III digital DC dr, 1997, #55271
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 32-XHW-4
Year: 1997
SERIAL. 21823-10-97, MODEL. 32-XHW-4, YEAR. 1997, NUMBER OF STANDS. 32, SPINDLE DIAMETER. 4 1/2", ROLL SPACE. 70", HORIZONTAL CENTERS. 18", VERTICAL CENTERS. 8" - 11", US VARIABLE SPEED DRIVE. 100 HP, TOOLED FOR GMT900 PANEL, EQUAL GEARED, QUANTUM III DIGITAL DC DRIVE.
12 Stand, Kundson #KS-2468, stud & trak framing rollformer, 1-3/4" shaft diameter, 13" rollspace, 5.5" vertical adj., 16" horizontal centers, AMS controls, 2009
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Model: KS-2468
Year: 2009
SERIAL. 13799 NEW. 2009 MODEL. #KS-2468 STANDS. 12 SHAFT DIAMETER. 1-3/4" ROLL SPACE. 13" VERTICAL ADJUSTMENT. 4" TO 5.5" HORIZONTAL CENTERS. 16" CONTROLS. AMS HYDRAULIC PUNCHES. 2, MOTOR. 7.5 HP, ENTRY GUIDE, HYDRAULIC CUT OFF TOOLED FOR 3.5" X 1.25" STUD HYDRAULIC COOLER.
JUST ADDED!
8 Stand, Dahlstrom #400-16OB rollformer, 2" shaft diameter, 12" roll space, 7.5 HP, 200 FPM
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dahlstrom
Model: 400-16OB
SERIAL. 1183MODEL. 400-16 OBNUMBER OF STANDS. 8BASE CAPACITY. 16SHAFT DIAMETER. 2"ROLL SPACE. 12"HORIZONTAL CENTERS. 13"VERTICAL ADJUSTMENT. 4" TO 7"TOP OF BASE TO LOWER SPINDLE CENTERS. 7-1/2"SPEED RANGE. 0 TO 200 FPMMOTOR HORSEPOWER. 7-1/2.
16 Stand, Tishken #16-MW-2, rollforming line, 2" arbor, 8" roll space, 20 HP, American mandrel uncoiler
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 16-MW-2
16 Stand Tishken 16-MW-2 Roll Forming Line, Manufacturer - Tishken, Type - 16-MW-2, Arbor - 2", Roll Space - 8", Vertical Adjustment - 5.5" - 7", Horizontal Centers - 12", Motor - 20 HP, Voltage - 3 ph, 60 cycle, 440 volt, Includes, American Mandrel Uncoiler, T&H Lemont prepunch, Currently tooled with 3 hole die ...more
11 Stand, Ardcor #M10U-R, U-joint drive rollformer, 1.5" spindle diameter, 12" roll space, 1996
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: M10U-R
Year: 1996
SERIAL. 96-023, MODEL. M10 U-R, NEW. 05/1996, STANDS. 11, SPINDLE DIAMTER. 1.5", UNIVERSAL DRIVES. U JOINT, ROLL SPACE. 12", HORIZONTAL CENTERS. 7", VERTICAL CENTERS. 3" TO 4-1/2", BASE TO BOTTOM SPINDLE. 3.5", SPINDLE KEY WAY. 1/4" X 1/8", EQUAL GEARED. 1:1, CONTROLS. Total Control QuickPanel Jr., MOTOR. 10 HP.
11 Stand, Tru Tech, rollformer, 50 HP, 2" spindle diameter, 10" roll space, coolant
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tru Tech
Spindle Diameter 2 inches Number of Stands 11 Power 50 horsepower Horizontal Centers 10" Vertical Centers 1.5 Base To Bottom Of Spindle 7.5 Roll Space 10" Coolant yes Dimensions 147"LR x 72" FB x 72" Tall Weight 14000 ounces, SMW FRequency Drive, Missing One Outbord Support.
18 Stand, Bradbury #D2-RF, 36" roll space, 2.5"dia.shafts, good condition, s/n #9860
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bradbury
Model: D2-RF
MODEL #: D2-RF, SERIAL #: 9860, 18 STANDS ON TWO 10 STAND BASES, 36" ROLL SPACE, 2.5" DIAMETER SHAFTS, 20" HORIZONTAL ROLL SPACE, 3.5" VERTICAL ADJUSTMENT, 5.5" - 9" VERTICAL CENTERS, 7.5" BASE TO CENTER OF LOWER SPINDLE, REEVES DRIVE, 36' LR x 6" FB x 53" TALL, GOOD CONDITION.
4 Stand, Dexter, rollformer, 2.125" diameter Shaft, 5" roll space, 9" horizontal centers, 2" vertical adj.
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
MODEL #: N/A, SERIAL #: R-3111, 2.125" DIAMETER SHAFTS, 5" ROLL SPACE, 9" HORIZONTAL CENTERS, 2" VERTICAL ADJUSTMENT, CURRENTLY TOOLED FOR 15" CORVETTE WHEEL TRIM, MOTOR: 3HP 230/460/60/3, 60" LR x 48" FB x 70" TALL, 4000 LBS ESTIMATED WEIGHT, GOOD CONDITION.
13 Stand, Ardcor #S-F, rollformer, 5-1/2" roll space, 1-1/2" spindle diameter, 15 HP, 1962, #65705
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: S-F
Year: 1962
SERIAL. 520, MODEL. S-F, VERTICAL CENTER. 4.187", VERTICAL ADJ. 3", HORIZONTAL CENTER. 5.5", ROLL SPACE. 10", SPINDLE DIAMETER. 1-1/2", SPINDLE KEYWAY.250" X.125", BASE TO BOTTOM SPINDLE. 5-3/4", GERING. EQUAL, BASE. 14 STAND BASE, FLOW. RIGHT TO LEFT, MOTOR. VARI SPEED 15 HORSEPOWER.
8 Stand, Contour #100-8-6, rollformer & cutoff press, 1" arbor diameter, 2-Axis entry guides, #66536
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
Model: 100-8-6
SERIAL. 82-004, MODEL. 100-8-6, STANDS. 8, ARBOR DIAMETER. 1", ROLLSPACE. 8", HORIZONTAL CENTERS. 6", VERTICAL ADJUSTMENT. 4" TO 5-3/4", LOWER SPINDLE TO BASE. 5-1/2", GEAR RATIO. EQUAL, SPEED. VARIABLE, 2 AXIS ENTRY GUIDES. YES, COOLANT. YES, 5 BUTTON CONTROL. YES, MOTOR. 7-1/2 HP, PNEUMATIC CUT OFF PRESS, SERIAL. ...more
9 Stand, Kane & Roach #579, rollformer, 2.5" spindle diameter, #2715
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Kane & Roach
Model: 579
UTUBE NUMBER: 2715, MANUFACTURER: KANE & ROACH, MODEL NUMBER: 579, SERIAL NUMBER: 8565, YEAR:, Number of Stands: 9, Line Direction: Right to Left, Spindle Diameter: 2-1/2", Roll Space: 33", Horizontal Center: 15", Vertical Adjustment: 5" – 8", Base Top to Center of Lower Spindle: ...more
12 Stand, Tishken #24-HMW-1-1/2, rollformer, 1-1/2" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13618-569, MODEL. 24-HMW-1-1/2", STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".
12 Stand, Tishken #24-HMW-1-1/2, rollformer, 1-1/2" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13619-669, MODEL. 24-HMW-1-1/2, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".
12 Stand, Tishken #4-HMW-1-1/2, rollformer, 1-1/2" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 4-HMW-1-1/2
SERIAL. 12429-567, MODEL. 4-HMW-1-1/2, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2'.
12 Stand, Bradbury #D-2.5, rollformer, 24" roll space, R-L, 50 HP VFD drive, 1979, #64205
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: D-2.5
Year: 1979
SERIAL. 8409, MODEL. D-2.5, YEAR. 06/1979, LINE DIRECTION. R-L, NUMBER OF STANDS. 12, ROLL SPACE. 24", ARBOR DIAMETER. 2.5", HORIZONTAL CENTERS. 28", VERTICAL CENTERS. 6.5"-13.5", CENTER OF LOWER SPINDLE TO BASE. 11", MOTOR. 50HP VFD DRIVE.
20 Stand, Ardcor #S10-2.5-37, rollformer, 2.5" arbor, 37" roll space, 10" horizontal centers, 4.75"-5.25" horizontal centers, 40 HP
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Ardcor
Model: S10-2.5-37
SERIAL. 82-024 MODEL. S10-2.5"-37 NUMBER OF STANDS. 20, ARBOR DIAMETER. 2.5" ROLL SPACE. 37" HORIZONTAL SPACING. 10" BOTTOM SPINDLE TO BASE. 5.75" VERTICAL ADJUSTMENT. 4.75 TO 5.25", SPINDLE GEAR RATIO. 1.333 TO 1, MOTOR. 40 HP.
10 Stand, Tishken #10LE-1-1/2, rollformer, 6" roll space, 4" distance between spindle
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Tishken
Model: 10LE-1-1/2
SERIAL.: 1366-445, MODEL.: 10LE 1-1/2, NUMBER STANDS.: 10, SPINDLE DIAMETER.: 1-1/2", ROLL SPACE.: 6", HORIZONTAL CENTER DISTANCE.: 8", DISTANCE BETWEEN SPINDLES.: 4", SPINDLE TO BASE CLEARANCE.: 4-1/2", MOTOR.: 7-1/2 HP, @ ADDITONAL COST: SPACERS AND SET UP EQUIPMENT, Machine Type.Roll Formers Manufacturer.TISHKEN ...more
22 Stand, Dahlstrom #450-22-OB, 2.25" shafts, 28" roll space, 25-100 FPM, 2009
General Machinery LLC | Detroit, MI
Category: Rollformers
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Dahlstrom
Model: 450-22-OB
Year: 2009
22 Stand Dahlstrom Rollformer, Model: 450-22-OB, Serial# 0741285, Shaft Diameter: 2.25", Roll Range: 4.5" - 5.75", Roll Space: 28", Horiz Center: 10", Speed Range: 25-100 FPM, Motor: 25 HP DC, Line Volts: 460/3/60.
16 Stand, Tishken, rollformer, 1.5" shaft diameter, 10" rollspace, 9" horizontal centers, 4"-8" vertical adj. range
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
Tishken Rollformer, Model 16-HMW-1 1/2, -Number of Stands: 16, -Shaft Dia.: 1.500", -Roll Space: 10.00", -Horizontal Centers: 9.00", -Center of Bottom Spindle to Base: 4.50", -Vertical Adjustment: 4.00", -Adjustment Range: 4" to 8", -Drive Motor 15 HP, 1150 RPM, -Overall Size: 178" L x 48" W x 47" High, Note: Missing ...more
28 Stand, Yoder #M3, rafted rollformer, 3" spindle diameter, 18" roll space, equal geared, 1995
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M3
Year: 1995
SERIAL. Y10498-0905, MODEL. M3, YEAR. 1995, NUMBER OF STANDS. 16, SPINDLE DIAMETER. 3", ROLL SPACE. 18", HORIZONTAL DISTANCE BETWEEN SPINDLE. 24", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 10", MIN VERTICAL CENTER DISTANCE BTWN SPINDLES. 5-1/2", MAX VERTICAL CENTER DISTANCE BTWN SPINDLES. 9", EQUAL GEARED. YES ...more
10 Stand, Tishken #10MW-2, rollformer press, 2" arbor, 8" roll space, 12" horizontal centers, 5.5"-8.5" vertical adj., coolant, 30 HP
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Tishken
Model: 10MW-2
WEIGHT10,300, SERIAL. 18830-984, YEAR NEW. 1984, MODEL. 10-MW-2, NUMBER OF STANDS. 10, ARBOR DIAMETER. 2", ROLL SPACE. 8", HORIZONTAL SPACING. 12", VERTICAL ADJUSTMENT. 5-1/2" TO 8-1/2", BOTTOM SPINDLE TO BASE. 5", COOLANT. YES, VFD DRIVE. YES, MOTOR. 30 HP.
Yoder #M2, rollformer, 14" roll space, 2" shaft diameter, 4"-7" vertical adjustment, 7" lower spindle to base
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
SERIAL. AD11898, MODEL. M2, ROLL SPACE. 14", SHAFT DIAMETER. 2", VERTICAL ADJUSTMENT. 4" TO 7", LOWER SPINDLE TO BASE. 7".
12 Stand, Ardcor #S-F, rollformer, 1.5" arbor diameter, 5.5" roll space, 10" horiz center, 12:1 ratio, variable speed drive, 20 HP
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Ardcor
Model: S-F
SERIAL. 5134-A, MODEL. S-F NUMBER OF STANDS. 12, SPACE FOR STANDS ON BASE. 16 ARBOR DIAMETER. 1-1/2" ROLL SPACE. 5-1/2" HORIZONTAL CENTERS. 10" LOWER SPINDLE TO BASE. VERTICAL ADJUSTMENT. 4" TO 5-1/4", EQUAL GEARED. YES, DRIVE HSG REDUCTION RATIO. 12:1, LINE DIRECTION. RIGHT TO LEFT, VARIABLE SPEED DRIVE. YES, ENTRY ...more
12 Stand, Rafter, rollformer, 2-1/8" arbor, 12" rollspace, 11" horizontal centers, 5.5"-7" vertical adj.
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Rafter
Weight12400 pounds, SERIAL. 8973 NUMBER OF STANDS. 12 DIAMETER OF SPINDLES. 2-1/8" ROLL SPACE. 12" HORIZONTAL DIS BETWEEN SPINDLES. 11" VERTICAL CENTER BETWEEN SPINDLES. 5-1/2" TO 7" BASE TO CENTER OF LOWER SPINDLE. 5-1/2" FLOOR TO TOP OF BED. 26.5" MOTOR. 15 HP.
12 Stand, Tishken #12-M2-2, Rollformer, 2" spindle, 6" roll space, 11" centers, AS IS
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
Model: 12-M2-2
, Manufacturer: Tishken, Line Direction: Left To Right, Number Of Passes: 12, Spindle Diameter: 2”, Roll Space: 6”, Horizontal Center: 11”, Vertical Adjustment: 5” To 7”, Base Top To Center Lower Spindle: 4.5”, Spindle Key Size: 0.375”, Gearing: Equal, Note: Missing 1 Outboard ...more
12 Stand, Tishken #12-MW-2, Rollformer, RL, 2" spindle, 8" roll space, 12" centers, AS IS
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
Model: 12-MW-2
, Manufacturer: Tishken, Number Of Stands: 12 (8 New Outboard Stands), Line Direction: Right To Left, Spindle Diameter: 2”, Roll Space: 8”, Horizontal Centers: 12”, Vertical Adjustment: 5.5” To 7”, Base Top To Center Lower Spindle: 5”, Spindle Key Size: 0.375”, Gearing: Equal ...more
19 Stand, Dreistern #P-60, side by side dual palss rollformer, 5" roll space, 25mm shaft, rafted
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P-60
MODEL. P-60-2, NUMBER OF STANDS. 19, DIAMETER SHAFT. 25MM, ROLL SPACE. 5", VERTICAL ADJUSTMENT. 3" TO 4", BASE TOP TO LOWER SPINDLE CENTER. 4-1/2", HORIZONTAL CENTER DISTANCE. 5.5", RAFTED. YES, U JOINT DRIVE. YES, SIDE BY SIDE OPERATION. POSSIBLE, (2) 3-WAY STRAIGHTENING HEADS. YES, MOTOR. 7.5/15HP, CONTROL. E-TRAC ...more
10 Stand, Dahlstrom #360-1, rollformer, 1.5" spindle diameter, 14.5" roll space, 8" horizontal centers, 4"-5" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Dahlstrom
Model: 360-1
UTUBE NUMBER: 4224, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 360-1, SERIAL NUMBER: 343, Number of Stands: 10, Line Direction: Right – Left, Spindle Diameter: 1-1/2, Roll Space: 14-1/2, Horizontal Center: 8, Vertical Adjustment: 4 5, Base Top to Center Lower Spindles: 4-1/2, Spindle Key Size: 1/4, Gearing Ratio: ...more
5 Stand, Yoder #M1-1/2, rollformer, 2" spindle diameter, 8" roll space, 11" horizontal centers, 4"-7" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Yoder
Model: M1-1/2
UTUBE NUMBER: 4161, MANUFACTURER: YODER, MODEL NUMBER: M1-1/2, Number of Stands: 5, Line Direction:, Spindle Diameter: 1-1/2″, Roll Space: 8″, Horizontal Centers: 11″, Vertical Adjustment: 4″ – 7″, Base Top to Center Lower Spindle: 5-5/8″, Spindle Key Size:, Gearing:, 10 HP ...more
12 Stand, ASC #CAS-4-36-12, rollformer, 3" spindle diameter, #3059
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Asc
Model: CAS-4-36-12
UTUBE NUMBER: 3059, MANUFACTURER: ASC, MODEL NUMBER: CAS 4 36 12, SERIAL NUMBER: 15072.000, YEAR:, Number of Stands: 12, Line Direction: Right to Left, Spindle Diameter: 3″, Roll Space: 36″, Horizontal Center: 18″, Vertical Adjustment: 6″ – 9″, Base Top to Center Lower Spindle: ...more
5 Stand, Lockformer Pittsburgh 20 Ga. Rollformer, 25 FPM
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Lockformer Snap Lock 20 Ga. Rollformer #6807 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
7 Stand, Tin Knocker #TK-16, Pittsburgh Roll Former, 16-20 gauge, 7 forming stations, 2 forming positions, 40-45 FPM, 3 HP
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Rollformers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Tin Knocker
Model: TK 16
Capacity 16 - 20 Ga Depth of Pocket 1/2" Width of Hammer over Edge, Adjustable up to 3/8" Speed 40 - 45 fpm Horsepower 3 HP Voltage 230V/3 Phase Dimensions (L x W x H) 59" x 24" x 41" s 7 Forming Stations & 2 Forming Positions Standard Pittsburgh Rolls.
10 Stand, Tishken #10MW2, 2" spindle diameter, 10" roll space, 12" horizontal centers, #10671
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tishken
Model: 10MW2
Used 10 Stand Tishken Model 10MW-2 Rollformer from 1946 in working condition. s 2" spindle diameter, 10" roll space, and a 10 HP main motor. Some components missing., 10 Stands, 2" Spindle Diameter, 10" Roll Space, 12" Horizontal Centers, 5.5 - 7.5 Vertical Adjustment, 5 Table to Center of Bottom Spindle, Right to ...more
12 Stand, Tishken #12-MW-2, rollformer, 2" spindle diameter, 8" roll space, 12" horizontal centers, 5.5"-7" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 12-MW-2
UTUBE NUMBER: 4163, MANUFACTURER: TISHKEN, MODEL NUMBER: 12-MW-2, SERIAL NUMBER: 4532-552, Number of Stands: 12 (8 New Outboard Stands), Line Direction: Right to Left, Spindle Diameter: 2″, Roll Space: 8″, Horizontal Centers: 12″, Vertical Adjustment: 5-1/2″ – 7″, Base Top to Center ...more
9 Stand, Fisher #MPF-1 Auto, dura fence panel rollforming line, uncoiler, cut-off shear
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: MPF-1
Make: Evalutioner, Co (Ukraine), Product: Fence Metal Panels, Number of Stands: 9, Material Thickness: 0.4mm 0.55mm, Motor: 1.5Kw, Speed: 10 meters per minute, Uncoiler, Coil Weight: 1.5 ton, Material Width: 350mm, Manual Mandrel, Coil Hold Down Arm, Feed Up Motor, Unit Weight: 282kg, 9 - Stand Roll Former, Chain ...more
20 Stand, Yoder #M3, rafted roll forming heads, 3 spindle diameter, 18" roll space, equal geared
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M3
TOTAL NUMBER OF STANDS. 20, NUMBER OF RAFTS. 5, STANDS PER RAFT. 4, SPINDLE DIAMETER. 3", ROLL SPACE. 18", HORIZONTAL DISTANCE BETWEEN SPINDLE. 24", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 10", MIN VERTICAL CENTER DISTANCE BTWN SPINDLES. 5-1/2", MAX VERTICAL CENTER DISTANCE BTWN SPINDLES. 9", EQUAL GEARED. YES.
20 Stand, RS Contour #CRTM-1.5-20S, rollformer, 1.5" spindle diameter, 10" roll space, 6" horizontal centers, 4" verti adj., 40-120 FPM, AMS MP300
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Contour
Model: CRTM-1.5-20S
SERIAL 85-039, MODEL CRTM 1.5 20S, STANDS 20, SPINDLE DIAMETER 1.5", ROLL SPACE 10", HORIZONTAL CENTERS 6", VERTICAL 4", GEARING EQUAL 1:1, SPEED 40 TO 120 FPM, DIRECTION LEFT TO RIGHT, MOTOR 15 HP, CONTROLS AMS MP300.
18 Stand, CMC, rollformer, 32" roll space, 2" dia.shafts, 18" horiz. centers, 40 HP,good
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Cmc
MODEL #: N/A, SERIAL #: N/A, 18 STANDS, 32" OF ROLL SPACE, 2" DIAMETER SHAFTS, 18" HORIZONTAL CENTERS, 3.5" VERTICAL ADJUSTMENT, 6" - 9.5" VERTICAL CENTERS, 7.25" BASE TO CENTER OF LOWER SPINDLES, (2) 9 STAND BASES, MOTOR: 40 HP 230/460/3/60 1185 RPM, 30' LR x 68" FB x 52" TALL, GOOD CONDITION.
7 Stand, Yoder #M2, rollformer, 2" spindle diameter, 13" roll space, 12" horizontal between spindles, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
SERIAL. Y12354, MODEL. M2, NUMBER OF STANDS (PASSES). 7, DIAMETER OF SPINDLES. 2", ROLL SPACE. 13", HORIZONTAL DISTANCE BETWEEN SPINDLES. 12", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 7", VERTICAL CENTER DISTANCE BETWEEN SPINDLES. 4" MIN, 7" MAX, UPPER SPINDLE ADJUSTMENT. 3", GEARING., CUTOFF PRESS. AIRAM, CUTOFF ...more
16 Stand, Bradbury #M-2-1/2.24.16, rollformer, 2-1/2" shaft diameter, 24" roll space, air clutch, chain drive, 30 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M-2-1/2.24.16
SERIAL. 9401 MODEL. M2-1/2-24-16NUMBER OF STANDS. 16SHAFT DIAMETER. 2-1/2"ROLL SPECE. 24"CENTER DISTANCE BETWEE STANDS. 17"LOWER SHAFT TO BASE. 7-1/2"VERTICAL ADJUSTMENT. 3"FORWARD & REVERSING. YES CHAIN DRIVE. YES AIR CLUTCH. YES MOTOR HORSEPOWER. 30.
