AI-ranked results for 10 stand - closest matches first
14 Stand, Tishken #24-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13619-669, MODEL. 24-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
12 Stand, Rafter, rafted rollformer, 2" shaft diameter, 14" roll space, R-L, 12" horizontal centers, 4"-7" vertical adj.
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Rafter
SERIAL. 2048, NUMBER OF STANDS. 12, HAND OF LINE. R - L, SHAFT DIAMETER. 2", ROLL SPACE. 14", HORIZONTAL CENTERS. 12" BASE TO CENTER OF LOWER SPINDLE. 6" VERTICAL CENTER BETWEEN SPINDLES. 4" TO 7", FLOOR TO TOP OF BED. 26.5", ENTRY GUIDE. YES, MOTOR. 15 HP.
14 Stand, Tishken #2-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 2-HMW-1-1/2
SERIAL. 3251 332?, MODEL. 2-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
14 Stand, Tishken #2-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 2-HMW-1-1/2
SERIAL. 16856-478 AND 13618-569, MODEL. 2-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
19 Stand, Dreistern #P-60, side by side dual palss rollformer, 5" roll space, 25mm shaft, rafted
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P-60
MODEL. P-60-2, NUMBER OF STANDS. 19, DIAMETER SHAFT. 25MM, ROLL SPACE. 5", VERTICAL ADJUSTMENT. 3" TO 4", BASE TOP TO LOWER SPINDLE CENTER. 4-1/2", HORIZONTAL CENTER DISTANCE. 5.5", RAFTED. YES, U JOINT DRIVE. YES, SIDE BY SIDE OPERATION. POSSIBLE, (2) 3-WAY STRAIGHTENING HEADS. YES, MOTOR. 7.5/15HP, CONTROL. E-TRAC ...more
Get email updates for newly added Rollformers
Rollformers (also known as roll forming machines) are used to shape sheet metal or strips into continuous profiles by passing them through a series of rollers. Commonly used in industries like construction, automotive, and manufacturing, they are ideal for producing parts like roofing panels, beams, and tubing. Rollformers are essential for efficiently creating uniform, high-quality metal profiles in large-scale production.
12 Stand, Rafter, rollformer, 2-1/8" arbor, 12" rollspace, 11" horizontal centers, 5.5"-7" vertical adj.
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Rafter
Weight12400 pounds, SERIAL. 8973 NUMBER OF STANDS. 12 DIAMETER OF SPINDLES. 2-1/8" ROLL SPACE. 12" HORIZONTAL DIS BETWEEN SPINDLES. 11" VERTICAL CENTER BETWEEN SPINDLES. 5-1/2" TO 7" BASE TO CENTER OF LOWER SPINDLE. 5-1/2" FLOOR TO TOP OF BED. 26.5" MOTOR. 15 HP.
14 Stand, Flagler #DF2, Duct Flange Machine, 18-26 Gauge Galvanized, 60 FPM, 7.5 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Rollformers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Flagler
Model: DF2
Flagler 18 Gauge 14 Station Duct Flange Machine, DF2, Inventory # 7730, Model: DF2, MPN # 35-200, Made in USA, Capacity: 18 – 26 Gauge Galvanized, Speed: 60 FPM (Optional up to 100 FPM), Motor: 7 1/2 HP, Standard s:, 14 Stations, 1 1/2″ Hardened and Ground Spindles, Hardened Feed Gauge, Rise/Fall Shorts ...more
Lokformer Junior Pittsburgh 24 gauge, 30 FPM, power flanging attachment, portable stand on rollers
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
S:, Power flanging attachmentPortable stand on rollers, MODEL: 24 GA. JUNIOR, CAPACITY: 24 GA., SERIAL#: 18467, APPROX. MATERIAL USED: 1”, DEPTH OF POCKET: 5/16”, SPEED: 30 FPM approx., MAIN MOTOR: 1/3 HP, BASE: Included, WEIGHT: 200 LBS approx., DIMENSIONS (LxWxH): 31”x14”x47”, FOB ...more
12 Stand, ASC #CAS-4-36-12, rollformer, 3" spindle diameter, #3059
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Asc
Model: CAS-4-36-12
UTUBE NUMBER: 3059, MANUFACTURER: ASC, MODEL NUMBER: CAS 4 36 12, SERIAL NUMBER: 15072.000, YEAR:, Number of Stands: 12, Line Direction: Right to Left, Spindle Diameter: 3″, Roll Space: 36″, Horizontal Center: 18″, Vertical Adjustment: 6″ – 9″, Base Top to Center Lower Spindle: ...more
14 Stand, Contour rollformer, 2"shaft dia., entry strip guide, 50 HP, #74976
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
SHAFT SIZE. 2" DIAMETER, ROLL SPACE. 14", HORIZONTAL CENTERS. 12", GEAR RATIO. 1/1, VERTICAL RANGE. 5.5" TO 7", - ENTRY STRIP GUIDE, MOTOR. 50 HP 230/460 VOLTS, OVERALL DIMENSIONS: 64" W X 162" LONG X 80"HIGH.
5 Stand, Lockformer Pittsburgh 20 Ga. Rollformer, 25 FPM
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Lockformer Snap Lock 20 Ga. Rollformer #6807 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
12 Stand, Pearson #1-1/2, rollformer, 1-1/2" spindle diameter, 24" roll space, 10 HP, #57791
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pearson
Model: 1-1/2
MODEL. 1-1/2, NUMBER OF STANDS. 12, ROLLSPACE. 24", BASE TO LOWER ARBOR CENTER. 3-1/2", ADJUSTMENT. 1/2", TOP ROLL VERTICAL:, MAX HEIGHT. 4-1/4", MIN CENTERS. 3-3/4", DIAMETER OF SPINDLE. 1-1/2", LINE DIRECTION. R-L, ENTRY AND EXIT PINCH ROLLS. YES, DRIVEN ENTRY HORIZONTAL CENTERS. 6-1/2" BETWEEN STANDS, TOOLED FOR ...more
7 Stand, Tin Knocker #TK-16, Pittsburgh Roll Former, 16-20 gauge, 7 forming stations, 2 forming positions, 40-45 FPM, 3 HP
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Rollformers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Tin Knocker
Model: TK 16
Capacity 16 - 20 Ga Depth of Pocket 1/2" Width of Hammer over Edge, Adjustable up to 3/8" Speed 40 - 45 fpm Horsepower 3 HP Voltage 230V/3 Phase Dimensions (L x W x H) 59" x 24" x 41" s 7 Forming Stations & 2 Forming Positions Standard Pittsburgh Rolls.
18 Stand, CMC, rollformer, 32" roll space, 2" dia.shafts, 18" horiz. centers, 40 HP,good
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Cmc
MODEL #: N/A, SERIAL #: N/A, 18 STANDS, 32" OF ROLL SPACE, 2" DIAMETER SHAFTS, 18" HORIZONTAL CENTERS, 3.5" VERTICAL ADJUSTMENT, 6" - 9.5" VERTICAL CENTERS, 7.25" BASE TO CENTER OF LOWER SPINDLES, (2) 9 STAND BASES, MOTOR: 40 HP 230/460/3/60 1185 RPM, 30' LR x 68" FB x 52" TALL, GOOD CONDITION.
24 Stand, Clinton, rollformer, 3" arbor, 46" roll space, 14" horizontal centers, 5.5"-7" vertical adj., 39" passline, exit side rolls w/ tooling
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
SERIAL. 1685 5-77, MODEL. 24 STAND DOOR PANEL, STANDS. 24, ARBOR. 3", ROLL SPACE. 46", CAPACITY.019" TO.035", HORIZONTAL CENTERS. 14", VERTICAL CENTERS. 5.5" TO 7", BASE TO LOWER SPINDLE. 5.5", DRIVE GEARBOXES. 4, GEARBOX RATIO. 15:1, PASS LINE. 39", EXIT SIDE ROLLS. YES WITH TOOLING, MOTOR. 40 HP DC WITH CONTROLS.
16 Stand, Bradbury #M-2-1/2.24.16, rollformer, 2-1/2" shaft diameter, 24" roll space, air clutch, chain drive, 30 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M-2-1/2.24.16
SERIAL. 9401 MODEL. M2-1/2-24-16NUMBER OF STANDS. 16SHAFT DIAMETER. 2-1/2"ROLL SPECE. 24"CENTER DISTANCE BETWEE STANDS. 17"LOWER SHAFT TO BASE. 7-1/2"VERTICAL ADJUSTMENT. 3"FORWARD & REVERSING. YES CHAIN DRIVE. YES AIR CLUTCH. YES MOTOR HORSEPOWER. 30.
20 Stand, Michigan #RMT-200-20, rollformer, 2" shaft diameter, 14" roll space, 50 HP, #74977
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Michigan
Model: RMT-200-20
SERIAL. 80829, MODEL. RMT-200-20, NUMBER OF STANDS. 20, SHAFT DIAMETER. 2", ROLL SPACE. 14", HORIZONTAL CENTERS. 15", LOWER SPINDLE CENTER TO BASE. 7-1/4", VERTICAL ADJUSTMENT. 4-1/2" TO 9", GEAR RATIO. 1 TO 1, AIR CLUTCH. WICHITA, VASRIABLE SPEED DRIVE. ALLEN BRADLEY 1336 PLUS, MOTOR HORSEPOWER. 50.
12 Stand, Roll Form Design #2.5, rollformer, 2-1/2" spindle diameter, 12" roll space, 20 HP, 1994
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roll Form Design
Model: 2.5
Year: 1994
SERIAL. 1951-175, MODEL. 2.5, YEAR NEW. 1994, NUMBER OF STANDS. 12, DIAMETER OF SPINDLES. 2-1/2", ROLL SPACE. 12", CENTER DISTANCE BETWEEN SHAFTS. 4" MIN; 7" MAX, BASE TO CENTERLINE OF LOWER SHAFT. 8-1/2", HORIZONTAL CENTER DISTANCE. 18", COOLANT. YES, AC VARIABLE SPEED DRIVE. COMMANDER, INDIVIDUAL GEAR BOXES. YES ...more
6 Stand, Bradbury #M1-1/2-86, rollformer, 14 gauge capacity, 1-1/2" arbor diameter, 8" roll space, pendant controls
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M1-1/2-86
SERIAL. 315, MODEL. M 1-1/2 86, CAPACITY. 14 GA, NUMBER OF STAND. 6, ARBOR DIAMETER. 1-1/2", ROLL SPACE. 8", HORIZONTAL CENTERS. 13-1/2", VERTICAL ADJUSTMENT. 3", BASE TO LOWER SHAFT. 7", FLOOR TO PASS THRU LINE. 34", PENNANT CONTROL. YES.
16 Stand, Tishken #16-HMW-1-3/4, rollformer, 1-3/4" spindle diameter, 12" roll space, L to R, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 16-HMW-1-3/4
SERIAL. 14685-473, MODEL. 16-HMW-1-3/4, NUMBER OF STANDS. 16, SPINDLE DIAMETER. 1/3/4", ROLL SPACE. 12", HORIZONTAL SPINDLE CENTER. 9", SPEEDS. 50 FPM, VERTICAL DISTANCE BETWEEN CENTER. 4-1/2" to 5-3/4", GEARS RUN IN OIL. YES, DIRECTION. LEFT TO RIGHT, MOTOR. 15 HORSEPOWER.
16 Stand, Bradbury #315-B, rollformer, 2.5" x 24", #2709
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Bradbury
Model: 315-B
UTUBE NUMBER: 2709, MANUFACTURER: BRADBURY, MODEL NUMBER: 315-B, SERIAL NUMBER: 32646, YEAR: 1997, Line Direction: Left to Right, Driven Stands: 16, Spindle Diameter: 2-1/2", Roll Space: 24", Vertical Adjustment: 4" – 5-1/2", Horizontal Centers: 9", Center Line of Lower Spindle to Base: 4", Entry Guide ...more
7 Stand, Yoder #M1.5, 12" width, 16"-20" ID, 4" stroke, 2" adj., rollforming line, air clutch, #156253
Machinery Values Inc | Harrison, NJ
Category: Rollformers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Yoder
Model: M1.5
7 STAND YODER M1.5 ROLL FORMING LINE CURRENTLY TOOLED FOR CABINET RACK INDUSTRY CONSISTING OF: 2500 LBS LITTEL UNCOILER CAPACITY - 2500 LBSWIDTH - 12" ID RANGE - 16"-20" 32 TON MINSTER #4 OBI PRE-PUNCH PRESS MODEL NUMBER - 4TONNAGE -″2STROKE - 4" SLIDE ADJUSTMENT - 2"AIR CLUTCHFLYWHEEL 7 ...more
20 Stand, Tishken Rollformer, 12" W, 24 Ga., 10000 lb. Capacity, Servomatic IV Feed, 15-1/2" Shut Height, 40 Ton, 3" Stroke, 45 SPM, AMS Control
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
, Width: 12", Stands: 20, Spindle Diameter: 2", Gauge range: 24 Gauge, Product: Access Door Back Panel, Includes:, Mandrel Uncoiler, -36" wide Mandrel Uncoiler, -10,000 Lbs. Weight Capacity, Servomatic IV Press Feed Unit, 40 Ton x 3" Rousselle Straight Side Press, -Model 4S56, -Shut Height: 15-1/2", -Tonnage: 40 ...more
18 Stand, Tishken #18-MLW-1-1/2, Rollformer, 6" Roll Space, Air-Clutch, 20 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 18-MLW-1-1/2
SERIAL. 11878-65, MODEL. 18-MLW-1-1/2, NUMBER OF STANDS. 18, ROLLSPACE. 6", DIAMETER OF ARBORS. 1-1/2", CENTER DISTANCE BETWEEN STANDS. 8", ARBOR ADJUSTMENT. 4 TO 5, BASE TO CENTER OF LOWER ARBOR. 4", EQUAL GEARED., MAXIMUM HEIGTH THAT CAN BE ROLLED. 1-1/2", AIR CLUTCH. YES, COOLANT. YES, MOTOR, HORSEPOWER. 20.
9 Stand, Proma #1-3/4DH-02, duplex rollformer, 1.75"spdl diameter, 18"-152" roll space, 1986
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Proma
Model: 1-3/4DH-02
Year: 1986
MODEL #: 1 3/4DH-02, SERIAL #: 472-DEVILB, 1-3/4" SPINDLE DIAMETER, 1/4" x 1/8" SPINDLE KEYWAY, 6-5/8" BASE TO SPINDLE BOTTOM, 18" - 152" ROLLSPACE, 8" HORIZONTAL CENTERS, 4-1/2" -5-1/2" VERTICAL CENTERS, 1:1.5 SPINDLE GEAR RATIO, 3:1 DRIVING HOUSING REDUCTION RATIO, 10 HP MOTOR, GOOD CONDITION.
12 Stand, RFC #814-12, rollformer, 2-1/2" shaft diameter, 14" roll space, run & jog, 25 HP, #75396
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rfc
Model: 814-12
SERIAL. 404, MODEL. 814-12, YEAR NEW. 12/1984, MATERIAL THICKNESS.125, NUMBER OF STANDS. 12, ROLL SPACE. 14", DIAMETER OF SHAFT. 2-1/2", CENTER DISTANCE BETWEEN SHAFTS. 4" MIN TO 7" MAX, BASE TO CENTERLINE OF LOWER SHAFT. 6", UPPER ARBOR ADJUSTMENT. 3", HORIZONTAL CENTER DISTANCE. 12", RUN & JOG. YES, FORWARD ...more
4 Stand, Urafco #M-1-1/4-C, rollformer, 5" roll space, 1.25" shaft diameter, 1.75" vertical adj., 7" horizontal centers, V/C, pendant Control
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Model: M-1-1/4-C
5" ROLL SPACE, 1.25" DIAMETER SHAFT, LUBE PUMP, 1.75" VERTICAL ADJUSTMENT, 7" HORIZONTAL CENTERS, 4" BASE TO BOTTOM ROLL, VARIABLE SPEED, PENDANT.
9 Stand, Lockformer #Cleatformer, rollformer, 20-22 gauge, Snap Lock, 25 FPM, S/N 5030
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Model: CLEATFORMER
LOCKFORMER CLEATFORMER - (3 IN 1) ROLLFORMER # 7447 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
JUST ADDED!
8 Stand, Yoder #M2, rollformer, 2" shaft diameter, 15" nominal roll space, coolant base, controls, 20 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
SERIAL. 12354MODEL. M2HEADS 5 OLD STYLE 3 NEW STYLE. YESNUMBER OF STANDS. 8 ON 10 STAND BASENOMINAL ROLL SPACE. 15"DIAMETER OF SHAFT. 2"CENTER DISTANCE BETWEEN SHAFTS. 4" MIN; 7" MAXBASE TO CENTERLINE OF LOWER SHAFT. 7"UPPER ARBOR ADJUSTMENT. 3"HORIZONTAL DISTANCE BETWEEN SHAFTS. 15"CONTROLS. YESCOOLANT BASE. ...more
16 Stand, B & K, rollformer gearboxes w/ outboards, 1-1/2" spindle diameter, 12" rollspace, 4.5"-7.5" vertical adj
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
PRICE: $2,500 Per Gearbox, UTUBE NUMBER: 2944, MANUFACTURER: B&K, MODEL NUMBER:, SERIAL NUMBER:, YEAR:, (Per Gearbox), Spindle Diameter: 1-1/2", Roll Space: 12", Spindle Key Size: 1/4", Base Top to Center Lower Spindle: 7-1/4", Vertical Adjustment: 4-1/2" – 7-1/2", PRICE: $2,500.00 ...more
9 Stand, GMC #PL-18HEM, rollformer, 21 FPM, 4 HP, 220V., new
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: PL-18HEM
Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency., ISO 9001 certified, 4HP Heavy Duty AC ...more
12 Stand, Custom #FS1-6412-18, rollformer, 1-1/4" arbor, MP300, 8" horiz centers, 4" vertical centers, pinch rolls entry & exit from straight, 1993
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: FS1-6412-18
Year: 1993
MODEL: FS1-6412-18, S/N:931703, NEW: 1993, 12 STANDS, MP 300 CONTROL SYSTEMS, 1 3/4" ARBORS, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, 705 HP DRIVE, 3 OVER 3 DRIVEN STRAIGHTENER, PINCH ROLLS ENTRY AND EXIT FROM STRAIGHTENER, LFV FLYING AIR CUT-OFF, LISTING ID#25538.
7 Stand, Yoder #M2, rollformer, 2" spindle diameter, 13" roll space, 12" horizontal between spindles, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
SERIAL. Y12354, MODEL. M2, NUMBER OF STANDS (PASSES). 7, DIAMETER OF SPINDLES. 2", ROLL SPACE. 13", HORIZONTAL DISTANCE BETWEEN SPINDLES. 12", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 7", VERTICAL CENTER DISTANCE BETWEEN SPINDLES. 4" MIN, 7" MAX, UPPER SPINDLE ADJUSTMENT. 3", GEARING., CUTOFF PRESS. AIRAM, CUTOFF ...more
8 Stand, Engel #800, duplex rollformer, 20-26 gauge, 90 FPM, #A6547
Sterling Machinery Exchange | South El Monte, CA
Category: Rollformers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Engel
Model: 800
Capacity 20-26 gauge Depth of Pocket / Size For Slip 1-1/16" Depth of Pocket / Size For Drive 1-1/8" Speed 90 feet per minute Motor / Voltage 5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM. Dimensions (L x W x H) 48" x 24" x 42" Stands 8 Stands.
12 Stand, Custom #4800-12, rollformer, 1-1/4" arbor, MP300, 8" horizontal centers, 4" vertical centers,, pneumatic pinch rolls, 1999, S/N 991203
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: 4800-12
Year: 1999
CUSTOM ROLL FORM / FORMER, MODEL: 4800-12, S/N: 991203, NEW:1999, 12 STANDS, 1 1/4" ARBORS, MP300 CONTROL, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, VERIABLE TO 14 1/2" DIE SPACE, 7 1/2 HP MAIN DRIVE, 3 OVER DRIVEN STRAIGHTENER, PNEUMATIC PINCH ROLLS, LFV AIR ACTUATED FLYING CUT-OFF.
14 Stand, ASC panel roll forming line with pre-cutoff & measuring system, 6'-42' long
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Asc
, Material: Galvanized, Galvalume, Pre-Painted, Thickness:.012” to.040”, 37” Between Housings, 2-3/4” Shaft, 3-1/2” OD, **Tooling for Roofing, Siding, Corrugated Materials (See pics), Includes:, - 36" Single-End Expanding Mandrel Uncoiler for 20” to 24” ID Coils, - ...more
7 Stand, Custom, cantilever-style rollformer, 1" shaft diameter, 3.75" roll diameter, 1.5" roll space
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Custom
UTUBE NUMBER: 3158, MANUFACTURER: CUSTOM, Panel Seamer, Line Direction: Right to Left, Shaft Diameter: 1", Number of Stands: 7, Roll Diameter: 3-3/4", Roll Space: 1-1/2", Horizontal Centers: 6", Vertical Adjustment: 3-1/2", Spindle Keyway Size: 1/4", Chain Driven, Motor: 2 HP, 208 / 230 / 460 ...more
7 Stand, Yoder #M2-1/2, rollformer, 2-1/2" shaft diameter, 14" roll space, side pass rolls, 60 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2-1/2
SERIAL. Y4435-265, MODEL. M-2-1/2, NUMBER OF PASSES. 7, SHAFT DIAMETER. 2-1/2", ROLL SPACE. 14", HORIZONTAL ROLL CENTERS. 18", CENTER OF LOWER SHAFT TO BASE. 8-1/2", VERTICAL SHAFT ADJUSTMENT. 4" TO 7", ENTRY EDGE GUIDE. YES, SCARFER. YES, SIDE PASS ROLLS. YES, SINGLE POINT ADJUSTMENT. YES, MOTOR. 60 HORSEPOWER.
28/30 Stand, Dreistern #P915-P1815, rafted type U joint drive rollformer, 1986, #61598
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P9SP-1815
Year: 1986
SERIAL. 86-2-62, NEW. 1986, MODEL. P915-P1815, NUMBER OF STANDS. 28 ON 30 STAND BASE, SHAFT DIAMETER. 1-1/2", ROLL SPACE. 12", VERTICAL ADJUSTMENT. 3" TO 5-1/4", BASE TOP TO LOWER SPINDLE CENTER. 4-1/2", RAFTED. YES, UNIVERSAL JOINT DRIVE. YES, EQUAL AND UNEQUAL GEAR BOXES. YES, VARIABLE SPEED DRIVE CONTROL. T B WOODS ...more
8 Stand, Contour #100-8-6, rollformer, 1" arbor diameter, 8" roll space, equal geared, variable speed
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Contour
Model: 100-8-6
MODEL#: 100-8-6, SERIAL#: 82-004, 8 STANDS, 1" ARBOR DIAMETER, 8" ROLLSPACE, 6" HORIZONTAL CENTERS, 4" - 5-3/4" VERTICAL ADJUSTMENT, 5-1/2" LOWER SPINDLE TO BASE, EQUAL GEARED, VARIABLE SPEED, 2 AXIS ENTRY GUIDES, COOLANT, 5 BUTTON CONTROL, 7-1/2 HP MOTOR, PNEUMATIC CUT OFF PRESS:, SERIAL #: PPP 131-54, ADJUSTABLE BASE.
9 Stand, GMC #PL-18HEM, Hemming forming machine, 3/8" hemming width, 21 FPM, 18 gauge
Manufacturing Solutions | Santa Ana, CA
Category: Rollformers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: PL-18HEM
HVAC MACHINE TOOLS24GA to 18GA 3/8"9 stations with 9 pairs of rolls on each side21 FPM4HP, 220V, 3 Phase, 15 Amp60" x 25" x 40"685 Lbs..
16 stand, ASC #R-Panel, Rollforming Line, 36" width, 200 FPM, w/ reel, coil car, & cut off, Beck S-II programmable Control
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Asc
Model: R-PANEL
YODER BROTHERS MACHINERY LOT #21176, UNCOILER & COIL CAR:, CAPACITY. 20,000 LBS, COIL WIDTH. 48", POWER DRIVEN. YES, HYDRAULIC EXPANSION. YES, POWERED COIL CAR. YES, ASC ROLLFORMER:, TOOLED FOR. R-PANEL, JOB # / SERIAL. 11441, MODEL. CAS-4-50-16, NUMBER OF STANDS. 16, ARBOR DIAMETER. 4", TOOLING ROLLSPACE. 50" ...more
Morlin #2400, Morlin, 24 gauge, 35 FPM, floor stand w/ wheels
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Morlin
Model: 2400
S:, All forming head components are precision crafted using case hardened steel and needle bearings throughoutExclusive tuck-away power cord for easy portabilityFloor stand with wheels, MODEL: 2400, SERIAL#: EGL-4-00223, CAPACITY: 24-to-28-gauge material, SPEED: 35 fpm, MOTOR: 1/3 H.P., 115 Single phase, 5.4 AMPS, 60 ...more
22/24 Stand, Tishken #24HW-S-3-1/2, Accelerator rollformer, 2-1/2" shaft diameter, 1999
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 24HW-S-3-1/2
Year: 1999
, SERIAL. 21939-299, YEAR NEW. 1999, MODEL. 24-HW-S-3-1/2, NUMBER OF STANDS. 22 (ON 24 STAND BASE), ARBOR SHARFT DIAMETER. 3-1/2", ROLL SPACE. 21", HORIZONTAL CENTERS. 14", VERTICAL ADJUSTMENT. 6-1/2" TO 8-3/8", LOWER SPINDLE TO BASE., GEARING. EQUAL, DIRECTION OF TRAVEL. LEFT TO RIGHT, FLOOR TO PASS LINE. 46" ...more
JUST ADDED!
14 Stand, Tishken #14-MW-2, rollformer, 8" roll space, 2" arbor diameter, 20 HP, R to L, coolant pump
iGAM | Detroit, MI
Category: Rollformers
Seller: iGAM
Location: Detroit, MI
Mfr: Tishken
Model: 14-MW-2
This listing is for a Tishken 14-MW-2 Roll former., Manufacturer: Tishken, Model: 14MW-2, Serial: 11245-664, Number of stands: 14, Arbor diameter: 2", Roll space: 8", Center distance between stands: 12", Center distance between arbors: 5-1/2" to 7", Base to bottom spindle center: 5", Keyways width:.375", Capacity (max ...more
12 Stand, Bradbury #D3-30-12, rollformer, 4" arbor diameter, 30" roll space, air clutch & brake, 60 HP
Perfection Global | Elk Grove Village, IL
Category: Rollformers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bradbury
Model: D3-30-12
Number of Stands: 12Tooling Arbor Diameter: 4"Roll Space: 30"Vertical Adjustment: 7" - 13.5"Distance Between Horizontal Centers: 28"Drive Motor: 60 HPMotor Speed: 1750 RPM, 4 Speed Transmission (2.6/1.9/1.33/1.00:1)Air Clutch & Break(4) Power Driven Upper Arbor Stands.
23 Stand, Ardcor rollformer, 2.5" x 48", #3364
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Ardcor
Model: 3364
UTUBE NUMBER: 3364, MANUFACTURER: ARDCOR, MODEL NUMBER: F15-2-1/2-48, SERIAL NUMBER: 83-088, YEAR: 1983, Line Direction: Right to Left, Number of Passes: 24, Spindle Diameter: 2-1/2", Roll Space: 48", Horizontal Center: 16", Vertical Adjustment: 5" – 9", Base Top to Center Lower Spindle: 6-1/2", Spindle Key ...more
9 Stand, Dahlstrom, 2" dia.spindle, 30" roll space, air clutch, 30 HP, used, #7840
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dahlstrom
Used 9 Stand Dalhstrom Rollformer with 2" spindle diameter and 30" roll space. Includes extra spindle box, shafts, air clutch, 30 HP motor, and length console control. Approx. dimensions: 21' L x 7'8" W x 6' H. Located in Detroit area., Spindles: 9, Spindle Diameter: 2, Roll Space: 30, Horizontal Centers: ...more
22/24 Stand, Tishken #24HW, rollformer, 14" roll space, 3.5" arbor, 1997
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Tishken
Model: 24HW
Year: 1997
SERIAL. 21939-299, YEAR NEW. 1999, MODEL. 24-HW-S-3-1/2, NUMBER OF STANDS. 22 (ON 24 STAND BASE), ARBOR SHARFT DIAMETER. 3-1/2", ROLL SPACE. 21", HORIZONTAL CENTERS. 14", VERTICAL ADJUSTMENT. 6-1/2" TO 8-3/8", LOWER SPINDLE TO BASE., GEARING. EQUAL, DIRECTION OF TRAVEL. LEFT TO RIGHT, FLOOR TO PASS LINE. 46", OPERATOR ...more
15 Stand, B & K, Roll Former, R-L, 1-1/4" spindle diameter, 11" roll space, 12" horizontal center, 5" vertical adj., 150 FPM
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: B & K
, Number of Stands: 15, Line Direction: Right to Left, Spindle Diameter: 1-1/4", Roll Space: 11", Horizontal Center: 12", Vertical Adjustment: 3-1/2" - 5", Base to Center Lower Spindles: 3-1/2", Base Working Surface: 26-1/2", Base Coolant Trough: 31-1/2", Strip Pass Line: 38", Line Speed: 150 FPM.
