1 - 50 of 67 listings
Balestrini #Mini/C, Reciprocating Double Sided Copy Shaper, (2) offset shaping heads, 98" reciprocating length, 7" H, 8" between spindles
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Balestrini
Model: MINI/C
BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPER: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end ...more
Cam-wood #FSM-460AX, finger joint shaper, 10 HP, 50 mm diameter spindle, 5500 RPM, 160 mm max diameter cutter, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: FSM-460AX
Year: 2026
CAM-WOOD FSM-460AX Finger Joint ShaperSingle Finger joint Shaper with 8" min. and unlimited max. block length; 4" max. block thickness, maximum timber height to feed into assembly press is 3"; 18" max. block width (horizontal joint only); 18" table working width.: -- Shaper spindle powered by 10 HP belt drive motor ...more
Cam-wood UAA04-SCX, door solid wood automatic shaper, 40" doors, 10 HP, 1-1/4 diameter x 6" high stackable multi-cutter, 9000 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD UAA04-SC Automatic ShaperManufactures raised panel cabinet doors with (1) operator; max. 40" doors. -- :10 HP Main motor drives 1-1/4" Dia. x 6" high stackable multi-cutter spindle @ 9,000 RPM to mill stile, rails, and raised panel profiles.Stackable cutter spindle with (3) pneumatic stop indexing ...more
Comec #FAS/2, Corner Milling Machine, (2) Heads, 5.5 HP motor, 40 mm spindle shaft, 5.9" cutter size, 7.8" working H, 2001
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Comec
Model: FAS/2
Year: 2001
COMEC - FAS/2,.Corner Milling MachineCOMEC FAS is a dedicated milling machine with: Inclinable heads for machining the corner of chair seats. : -- (2) Heads with: 5.5 HP motor and 40 mm spindle shaft. -- Max. cutter size: 150 mm (5.9"). -- Tilting of milling units: 20/ +45 in horizontal plane. -- Fixed left hand ...more
Crouch #315, Shape & Sand Automatic Shaper, feed through, single sided, 2" thick work capacity, 4"-7" diameter Cutter, 1.25" diameter Spindle, 7.5 HP, 6200 RPM
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Crouch
Model: 315
CROUCH 315 Feed Through Shape and Sand: --Feed through, single sided Profile Shaper/Sander; accommodates up to 2" thick material. -- : (1) 7.5 HP - 6,200 RPM Shaping station, 4" - 7" dia. cutter cap., 1-1/4" dia. spindle, horizontal adjustments with digital indicator for shaper & fence settings.
Get email updates for newly added Woodworking Shapers
Woodworking shapers are built for precise edge profiling, perfect for cabinetry, furniture, and door production. They include models with adjustable spindles, sliding tables, and high-speed motors for smooth, accurate shaping. These machines are essential for creating intricate and consistent profiles on wood pieces.
Delta #43-340, Heavy Duty Wood Shaper, 3/4" spindle, 3" travel, 2 HP, 230 V., 3 phase, 27" x 28" table
Wheeler Machinery Sales | Pomona, CA
Category: Woodworking Shapers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Delta
Model: 43-340
Delta 43-340 Heavy Duty Wood Shaper #7786 #1, Cast Iron Table Size: 27 x 28, Spindle Size: 3/4, Spindle Travel: 3, Motor HP: 2HP, Electrical: 230V/3PH.
Delta #43-373, shaper, 200 V., 3 phase, 60 Hz,, serial #86K19798
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Shapers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Delta
Model: 43-373
3PH/200V Delta 43-373 Used Shaper. Priced to Sell! Make an offer.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing information.Click ...more
Delta #43-459, Shaper, w/ Power Feeder, 5 HP, 208-230/460 V., 1.25" spindle, 7k/10k RPM, 27" x 40" table
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Delta
Model: 43-459
Delta 42-459 Shaper with Piwer Feeder, Manufacturer ( to be confirmed), 5HP 208-230/460V 3 Phase, 1-1/4" Spindle, Forward and Reverse switch, 2 Speeds: 7,000 and 10,000 RPM, Capacity under the nut: 5", Heavy duty Ritter fence, adjustable left and right sides, Extra table wing drilled and threaded for feeder, Table ...more
Extrema #XF-38.1, 3-Roll Power Feeder w/Mounting Column, 4-3/4" & 2-1/4" rollers, 1 HP, (8) Speeds, 3/4" roller floatation, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: XF-38.1
Year: 2026
EXTREMA XF-38.1 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 3-roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (8) Speeds of 7 - 13 - 18 - 22 - 26 - 36 - 43 - 55 & 108 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast ...more
Extrema #XF-38.3, 3-Roll Power Feeder w/Mounting Column, 4-3/4" & 2-1/4" rollers, 1 HP, (8) Speeds, 3/4" roller floatation, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: XF-38.3
Year: 2026
EXTREMA XF-38.3 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 3-Roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (8) Speeds of 7 - 13 - 18 - 22 - 26 - 36 - 43 - 55 & 108 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast ...more
Fletcher Machine #E-ZDoor, Raised Panel Door Machine, 129" width x 48" D max Work capacity, 1" Material Thickness, 24.5" width x 7/8"-2" H Arc, 62" Table Travel, 10 HP
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fletcher Machine
Model: E-ZDOOR
Fletcher EZ-Door Raised Panel Door Machine Moter: 10HP Spindle Capacity: 6" Working Width: 96"-129" Working Depth: 41-48" Max Arch Width:24-1/2" Max Arch Height: 7/8"-2" Max Straight Cut Length: 59" for Rails / 55" for Panels Max Material Thickness: 1" Min Rail Material Width: 1-1/2" Table Travel: 62".
Fletcher Machine ry #EZ-DOOR, door machine automatic shaper, 10 HP spindle motor, 6500 RPM, 62" travel length, 4-standard cutters, 1-1/4" arbor, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Fletcher Machine
Model: EZ-DOOR
Year: 2026
FLETCHER EZ-DOOR Raised Panel Door MachineThis freestanding machine can produce an entire 5-piece door in a matter of minutes. Easy to operate, the E-Z Door has a 4-position configuration to produce raised panels, cope/stile profiles and mullions for glass doors. Cathedral doors are produced by using a quick change ...more
Helma #CF-40, dual shaper spindle profile copy machine arch moulder, 10500 RPM, S/N 6086
Equipment Hub | Stone Mountain, GA
Category: Woodworking Shapers
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Helma
Model: CF-40
, Stock #: SB-B-181058, Location: Orlando, FL 32809, Brand: Helma, Model: CF 40, Serial #: 6086, Approx. Shipping Weight: 1,200 Lbs., Approx. Shipping Dimensions: 40" L x 48" W x 56" H, Loading Fee: Rigging Required, Max Working Width: 450 mm, Two Vertical Shaper Spindle Motor: 7.5 HP, Vertical Shaper ...more
Invicta / Delta #RS-15 Model 43780, single spindle shaper, 53" x 41" x 35.5" tall, 7.5 HP, 230/460 V.
Icon Industries, Inc | Grand Rapids, MI
Category: Woodworking Shapers
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Invicta / Delta
Model: RS-15
Model 43780. Serial #1468. Approx table dimensions: 53" x 41" x 35.5" tall. 7.5 HP motor (230/460 volts; 3 phase). Approx 1300 pounds. Item #2725.
Ironwood #FX750, Shaper, 230V/460V 3ph
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ironwood
Model: FX750
Ironwood Stiles Shaper, Model FX750, 230V/460V 3ph.
Jenkins #JSM, Shaper w/Tenoning Table, 122" X, 8" Y, 96" rail length, 12" rail width, 2 1/4" stock thickness, 6" arch height, 2011
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jenkins
Model: JSM
Year: 2011
JENKINS - JSM, NC Controlled Shaper & MortiserNC Controlled with: (1) Shaper head with ATC (18) tools, (1) tenon head, and (1) mortising head.Machine : -- Total X-travel: 122". -- Y-Axis (useful zone-1 only): 8". -- Min. length rail: 4". -- Max. length rail (Zone 2, 3 only): 96". -- Min. width rail: 1-1/4". -- ...more
Laguna #Compact, Shaper, 3 HP, 220 V., 4" spindle travel, 10k RPM, 32" x 26-1/2" table, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: COMPACT
Laguna Model Compact Shaper The new Compact Shaper from Laguna is already regarded as best in class. Impressive precision fence and wide-range RPM make it a versatile investment for any pro. The fit and finish on this world class machine is incredible.You will be hard pressed to find a better value than the Compact ...more
Laguna #Pro, Shaper, 5 HP, 4" spindle travel, 10k RPM, digital read out, 39-5/16" x 31-7/16" x 3-1/2" table, 5HP, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: PRO
Laguna Model Pro Shaper 5HP The brand new Laguna Pro Shaper combines a precision shaper with s normally found only in much higher priced machines. For starters, the table measures an impressive 31 x 39 and is predrilled to accept most power feeders.The fence has a precision micro-adjustment that is aligned by a solid ...more
Laguna #Pro, Shaper, 7.5HP, 4" spindle, 10k RPM, 39-5/16" x 31-7/16" x 3-1/2" table, digital read out New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: PRO
Laguna Model Pro Shaper 7.5HP The brand new Laguna Pro Shaper combines a precision shaper with s normally found only in much higher priced machines.For starters, the table measures an impressive 31 x 39 and is predrilled to accept most power feeders.The fence has a precision micro-adjustment that is aligned by a solid ...more
Larick #390, Automatic Shaper, 7.5 HP, 4000-7000 RPM, 0.75 HP feed, 20 FPM feed, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Larick
Model: 390
Larick Model 390 Automatic Shaper 7.5HP Cutterhead Motor (10HP Option Available) Variable Speed: 4000-7000RPM 1-1/4" Spindle Diameter 4" to 7" Tool Diameter 6" Wide Track w/ 4 Staggered row of Hold-Down Wheels 3/4HP Feed Motor 0-20FPM Feed Speed Max Material Thickness: 3" Touchscreen Controls Wired for 208/240V 3PH ...more
JUST ADDED!
Larrick #390, Automatic Shaper, 1.25" spindle, 2" max. part thickness, 7.5 HP, 4000-7000 RPM, 6" conveyor width, 220 Volt, 3PH
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Shapers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Larrick
Model: 390
The Larick 390 Ultimate Shaper is an automatic, conveyor-fed machine designed for precision profiling and shaping, specifically popular for handling arched panels and small parts. Built in the USA, it combines the s of a traditional shaper with the high-volume capabilities of an automated system.- Ideal for Small ...more
Master Machinery #MC-MDS-1, single spindle linear copy shaper, 27.5" x32" tbl., 7500-10000 RPM, 3 HP, 1987
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Master
Model: MC-MDS-1
Year: 1987
MASTER MACHINERY - MC-MDS-1: Single Spindle Shaper -- Table size: 27-1/2" x 32". -- Spindle speed: 7,500 - 10,000 RPM. -- Main motor: 3 HP.
Mikron R-200, Rosette Maker, 2-1/2"-5" square blocks, 1.5 HP, 2-7/8" spindle cutterhead at 7500 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mikron
Year: 2026
Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks; 1.5 HP motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with ...more
Northtech #NT-525, Shaper, 5HP, 10k RPM, 5" spindle travel, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-525
Northtech Model NT-525 Shaper Interchangeable Spindles Choice of 3/4, 1", 1-1/4" or 19mm, 25.4mm, 30mm. Spindles has MK5 Taper to ensure precision Fitting and allow quick change-over. Quick Change Spindle Speeds Four Speed Dynamically Balanced Pulley for spindle speeds of 3000,4500,7500,and 10000 RPM Reversible ...more
Northtech #NT-625, Shaper, 7.5HP, 10k RPM, 1-1/4" spindle, 5" travel, spindle brake, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-625
Northtech Model NT-625 Shaper 7.5 HP Spindle Motor 1-1/4" Spindle 4 Speeds: 3000RPM, 4,500RPM, 6,000RPM, 10,000RPM (2) 5"x17" Micro Adjustable Fence Foot Operated Spindle Brake 31-1/8"x41-3/8" Worktable 5" Under Nut Spindle 5" Vertical Spindle Travel 33-3/4" Table Height (1) 4" Dust port requiring 436CFM at point of ...more
Northtech #NT-625MS, Shaper, 7.5HP, 3PH, 10k RPM, 1-1/4" spindle, 5" travel, spindle brake, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-625MS
Northtech Model NT-625MS Sliding Table Shaper 7.5 HP Spindle Motor 1-1/4" Spindle 4 Speeds: 3000RPM, 4,500RPM, 6,000RPM, 10,000RPM (2) 5"x17" Micro Adjustable Fence Foot Operated Spindle Brake 31-1/8"x41-3/8" Worktable 5" Under Nut Spindle 5" Vertical Spindle Travel 33-3/4" Table Height (1) 4" Dust port requiring ...more
Northtech #NT-735, Shaper, 1-1/4" spindle, 10k RPM, 10 HP, 36" x 48" table, digital read out, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-735
Northtech 735 Series Shaper 10HP spindle motor 1-1/4" spindle 4 speed 3000RPM, 4,500RPM, 6,000RPM, 10,000RPM (2) 5-3/4" x 24" micro adjustable fences Foot operated spindle lock Foot operated spindle brake 36" x 48" worktable 5" under nut spindle 5" vertical spindle travel 35" table height (1) 5" dust port requiring ...more
Oliver #10047.001, Shaper, 3HP, 1Ph, 1-1/4" spindle diameter, 6-1/4" table opening, 32" x 26" table, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10047.001
Oliver Model 10047.002 Shaper 5HP 1Ph Large cast iron table is precision ground table to provide a solid work surface. Table s pre-drilled and threaded holes for optional power feeder. Full cabinet stand includes wheels and locks. 1-1/4" interchangeable spindle included, other optional sizes available. Optional router ...more
Oliver #10047.001, Shaper, 3HP, 1Ph, TEFC, 6-1/4" table opening, 32" x 26" table, New
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10047.001
Oliver 10047.001 Shaper 3HP 1Ph Large cast iron table precision ground table provides a solid work surface. Full cabinet stand includes wheel and locks. 1-1/4" interchangeable spindle included, other sizes available. Optional router bit collets available. Four spindle speeds for versatility Belt changes are quick and ...more
Oliver #4705, Shaper, 7.5 HP, 10K RPM, 39" x 29-1/2" table, New (2 available)
RT Machine | Hughesville, PA
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 4705
Oliver Model 4705 Shaper Stock No. 4705.001 (5Hp 1Ph) Stock No. 4705.002 (7.5Hp 3Ph) Main Motor: 7.5HP 230v-3ph, or 5 HP 220v-1ph Table Dimensions: 39" x 29-1/2" Spindle Rotation: Reversible Spindle Speeds: 5,000 RPM, 7,000 RPM, 10,000 RPM Max. Tool Diameter: 7" Below Table, 8" Above Spindle Diameter: 1-1/4" & ...more
Omga #TI-189 NC Halving Machine with Feeder, 3 moulding heads, 1 grooving head
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Omga
Model: TI-189
3 Moulding heads, 1 grooving head, workpiece length 2300 mm, workpiece thickness 35 mm, Hopper feed, Numeric controller.
Pade #T45, shaper, single end tenoner that will handle straight or curved material, 1997
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Pade
Model: T45
Year: 1997
Single End Tenoner that will handle straight or curved material. Carves round ended tenons through the use of (2) worktables which independently slide on steel rails., Tables independently adjustable for height and tilt, Max width 100mm, Max thickness 30mm, Max Depth 50mm, Table adjustment (vertical) 100mm, Tilting ...more
Pade #UINZE-6T, Linear Shaper/Sander, (6) Heads (3 each side), 98.4" L x 11.7" width x 7.1" H working dims., 1998
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Pade
Model: UINZE 6T
Year: 1998
PADE UINZE 6 T CNC Copy shaper/sander -- (6) Heads (3 each side), 2,500 mm (98.4") max. working lenght, 500 mm (11.7") max. working width, 180 mm (7.1") max. working height. -- Each side : 1st & 2nd heads are for shaping only with 7.5 kW (10 HP) - 8,400 RPM motors; 3rd head is either shaping or sanding with 5 kW ...more
Powermatic #26, Shaper
iBid Machinery | Roswell, GA
Category: Woodworking Shapers
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Powermatic
Model: 26
Product : Powermatic Model 26 Shaper - Illinois, Machine Location State: Illinois, Machine Location City: Belvidere, Year:, Make: Powermatic, Model: 26, Serial No: 89267215 - verify in plate above, Phase/Voltage: See plate in photos, Condition: Good working condition, Any Known Issues: No, In Production: Yes, Product ...more
Powermatic #27, table shaper w spindles, 29-7/8" x 28" table, 3" spindle travel, 7000-10000 RPM
Dominion Air & Machinery Co | Roanoke, VA
Category: Woodworking Shapers
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Powermatic
Model: 27
Powermatic #2700, Shaper, w/ Power Feeder, 3 HP, 230 V., digital read out,
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Powermatic
Model: 2700
Powermatic 2700 Shaper with Power Feeder, Manufacturer, 3 HP 230 volt single phase, [s](https://powermatic.com/pm2700-shaper-3hp-1ph-230v#s), Digital readout gives the use exact spindle height and allows for.001" adjustments, Heavy duty 30" x 40" precision ground tabletop for smooth stock feeding, Independently ...more
JUST ADDED!
Powermatic #2700-5-3, Shaper, 2025
iBid Machinery | Roswell, GA
Category: Woodworking Shapers
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Powermatic
Model: 2700-5-3
Year: 2025
Product : Powermatic Shaper 2700 5-3 - California, Machine Location State: California, Machine Location City: Thousand Oaks, Year: 2025, Make: Powermatic, Model: 2700 5-3 - California, Serial No: 230727005849, Phase/Voltage: 3PH see plate in photos, Condition: Great used condition, Any Known Issues: No, In Production: ...more
Powermatic #PF-41, Power Feeder, 360 deg swing, 1 HP, 8.5" Height of rollers parallel to tabletop, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Powermatic
Model: PF-41
Year: 2026
POWERMATIC PF-41 4-Roll Power Feeders: -- Cast Iron construction. -- Continuous duty motors transfer power from the gearbox to the feed rollers. -- Moveable universal joints and locking mechanisms lock the feeder in horizontal, vertical, or angle feed positions. -- Roller chain and sprocket design provide positive ...more
Powermatic #TS-29, Shaper, 7.5 HP, 3 Ph, 230/460 V., brand new
Nevins Machinery Concepts Inc | South Easton, MA
Category: Woodworking Shapers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: TS-29
Style (Type) Shaper, Spindle Speed (RPM) 3,000, 4,000, 6,000, 8,000, 10,000, Maximum Spindle Diameter (In.) 1-1/4, Spindles Included 3/4, 1, 1-1/4, Spindle Size Under Nut (In.) 3/4" Spindle (3-1/2), 1" Spindle (6-1/4), 1-1/4" Spindle (6-1/4), Spindle Travel (In.) 7, Spindle Tilt (Deg.) 45 Forward, 5 Back ...more
Powermatic #TS-80, wood shaper with stock feeder
Yoder Machinery Sales | Holland, OH
Category: Woodworking Shapers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Powermatic
Model: TS-80
MODEL. TS-80, STOCK FEEDER.YES.
JUST ADDED!
Profilematic #EZ-754, Profile Shaper, 4-Station, 6" Chain Drive, 1" diameter Spindle, 2" width Sanding Belt, 1"/1.25" Arbor, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Profilematic
Model: EZ-754
Year: 2004
4-Station Profile Shaper: -- 6" Chain drive with non-marking rubber top pads traveling on a hardened and ground precision dia. 5/8" round rods, Top pressure beam driven, Heavy duty fabricated transporter frame, Forward and reverse mode and block mode for creating sanding tools -- Precision X & Y axis mounting ...more
Profilematic #EZ-754, 4-StationShape & Sand Machine
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Profilematic
Model: EZ-754
Prefilematic EZ-754 4-Station Shape & Sand Machine, Seller′s, - 4 station shape sander, - Station #1 – Shaper, - Station #2 & #3 – Flexible Belt Sanding w/ felt “heads”, - Station #4 – Spindle Sander, - –, - 6″ Chain Drive with non-marking rubber top pads ...more
Ritter #R-1012531, single spindle shaper, 1.25" spindle, 3" spdl travel, 36" x 30" table, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ritter
Model: R-1012531
Year: 2008
Ritter R-1012531 Single Spindle Shaper: -- Spindle size: 1 -1/4" -- Spindle Travel: 3′′ -- Spindle Speeds (2): 7500/10000 RPM -- Motor HP: 5 -- 36" x 30" Table size -- Approx. 36" working height.
Ritter #R-30, 3-head automatic shaper (door-solid wood), 38" x 64" table
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ritter
Model: R-30
RITTER R-30 3-Head Shaper(3) Shaper spindles mounted in a common base, 52" x 68" worktable; designed for running raised panels, as well as style & rail material for raised panel doors. -- : 1-1/4" Dia. V-belt driven spindles powered by (1) 7.5 HP motor and (2) 5 HP Motors; 6,100 & 8,600 RPM spindle speeds and ...more
Ritter #R1175, very hevy duty shaper & 4-wheel feeder, 7.5 HP, 48" x 38" table area, 2 spindles, 2005
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Shapers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Ritter
Model: R1175
Year: 2005
2005 Ritter R1175 used very heavy duty shaper and 2004 Silver AP/44 feeder!For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
SCM #T-120/C, heavy duty shaper, 5.5 HP, 6.3 amps, 41" x 35" table, 1-1/4" spindle, 5 speed
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Shapers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Scm
Model: T-120/C
SCM T120 used shaper is one of the industrys most trusted heavy-duty spindle shapers. Built for precision, power, and long service life, the T120 is ideal for cabinet makers, millwork shops, and production facilities looking for a dependable workhorse.This unit s SCMs renowned build quality, a robust cast-iron table ...more
SCM #T-160, heavy duty tilting spindle shaper, 1985
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: T-160
Year: 1985
SCM T 160 TILTING SPINDLE SHAPER9 HP Main motor, (5) speeds of 2,900 - 4,400 - 6,000 - 7,800 & 10,000 RPM (.but currently with single speed 6,000 RPM pully only!); 1-1/4" dia. interchangeable spindle, 7" spindle length with 4-3/4" motorized vertical spindle adjustment, 9" max. height above table. -- s: 0 - 45 ...more
Silver #SLS-735, shaper with feeder, 1-1/4" spindle, 7.5 HP, 4 speed, 575 V., 2002
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Shapers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Silver
Model: SLS-735
Year: 2002
2002 Silver SLS-735 Shaper with FeederFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
U.S. Motors Concepts #CHB-16, automatic hauncher -notcher, 1.57" spindle diameter, 16" length, 2025, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Motors
Model: CHB-16
Year: 2026
US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. : a ...more
U.S. Motors Concepts CHB-12, Hauncher Automatic Shaper, 12" length, 10" cutter diameter, 2-1/2" cut depth, 8" material stacking height, 36" x 16 table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Motors
Year: 2026
US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. : a ...more
