Tri-Clover&nbsp;Positive Displacement Pumps

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: TSR1NSS-10MDV0WL-A

1994 Tri Clover TSR-Series positive displacement pump. Model: TSR1NSS-10MDV0WL-A. S/N: 190336-01. Capacity: 3 gpm @ 7.5 psi. Displacement per Revolution: 0.006 gal. Word Gear Electric Motor, hp, 1700 rpm, 230/460 V, 1.84/.92 amps, 60 Hz, 3 phase. Drive, ratio: 3.89, rpm out: 437 (final). The TSR-series pumps can ...more

12 GPM @ 20 psi, Tri-Clover #PR10-1-1/2-UH4-SL-S, Positive Displacement Pump, 0.23 Gallons, 1.5" diameter ACME inlet, 1.5" diameter ACME oulet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR10-1-1/2-UH4-SL-S

1991 Tri Clover PR10 Positive Displacement Pump. Model: PR10-11/2-UH4-SL-S. Maximum Capacity: 12 gpm @ 20 psi. Displacement per Revolution:.023 gal. Seal option: single, Carbon against Stainless Steel. (2) 3 in. rotors. Inlet: (1) 1-1/2 in. dia. ACME fitting. Outlet: (1) 1-1/2 in. dia. ACME fitting. Overall ...more

28 GPM @ 20 psi, Tri-Clover #PRED25-3M-UC4-SL-S, Positive Displacement Pump, 8 Gallons, 3" S-line inlet, 3" S-line outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRED25-3M-UC4-SL-S

Tri Clover PRED 25 Positive Displacement Pump. Model: PRED25-3M-UC4-SL-S. S/N: 329798-01. Maximum capacity @ 20 psi: 28 gpm. Displacement per 100 revolutions: 8 gal. Seal option: Double mechanical seal with water flush. Tri Clover pumps perform more effective on suction lift service; handle anything from liquids to ...more

28 GPM @ 20 psi, Tri-Clover #PRR25-11/2M-TC1-4-ST-S, Rotary Lobe Positive Displacement Pump, 2275 RPM motor, 455 RPM speed, (2) 1.5" S-line Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRR25-11/2M-TC1-4-ST-S

Tri-Clover Rotary Lobe Positive Displacement Pump. Model: PRR25-11/2M-TC1-4-ST-S. Serial: R1719. Ladish Co. Tri-Clover Division. PR Series. Maximum flowrate at 20 PSI: 28 GPM. Pump displacement per revolution:.08 gallons. Includes pressure relief faceplate, Buna rotors, adjustable gear drive. SEW Eurodrive: type ...more

60 GPM @ 20 psi, Tri-Clover #PR60-3-UC4-ST-S, Positive Displacement Pump, 0.175 Gallons, 2" inlet, 3" outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR60-3-UC4-ST-S

Tri-Clover PR60 Rotary Lobe Positive Displacement Pump. Model: PR60-3-UC4-ST-S. Serial No.: V6790. A3 certified. Maximum flowrate (at 20 PSI): 60 GPM. Pump displacement: 0.175 gallons per revolution. Maximum temperature: 200F. Static o-ring seals. Vented faceplate. Ladish Co. Tri-Clover Division Kenosha Wisconsin USA. ...more

Get email updates for newly added Positive Displacement Pumps

Positive Displacement Pumps (also known as PD pumps) are pumps that move fluids by trapping a fixed volume and forcing it through the system. Commonly used in industries like chemical processing, oil and gas, and food production, they are ideal for handling viscous, abrasive, or sensitive fluids. Positive displacement pumps are essential for applications requiring precise flow control and high-pressure performance.

60 GPM @ 20 psi, Tri-Clover #PRS60-3M-UH2-ST-S, Positive Displacement Pump, 17.5 Gallons, (2) 3" diameter S-Line Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRS60-3M-UH2-ST-S

Tri Clover PRS60 Positive Displacement Pump. Model: PRS60-3M-UH2-ST-S. S/N: 112929-01. Maximum capacity @ 20 psi: 60 gpm. Displacement per 100 revolutions: 17.5 gal. Side-mount. Tri Clover pumps perform more effective on suction lift service; handle anything from liquids to semi-solids with entrained vapors. Reduced ...more

60 GPM, Tri-Clover #PRED60-3-UC4-SL-S, Positive Displacement Pump, 17.5 Gallons, (2) 3" ACME Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRED60-3-UC4-SL-S

Tri Clover Positive Displacement Pump. Model: PRED60-3-UC4-SL-S. S/N: W2603. Inlets/outlets: (2) 3 in. ACME fittings. Overall dimensions: 1 ft. 4-1/2 in. L x 1 ft. W x 1 ft. 2-1/2 in. H.

60 GPM, Tri-Clover #PRR60-2MT-TC1-4-SL-S, 2" rotary lobe pump, Stainless Steel, 5 HP, #28287

Federal Equipment Company | Cleveland, OH

866-74... (Show) 866-740-5490

Seller: Federal Equipment Company

Location: Cleveland, OH

Mfr: Tri-Clover

Model: PRR60-2MT-TC1-4-SL-S

Used TriClover rotary lobe pump, model PRR60-2MT- TC1-4-SL-S, stainless steel construction, 2" inlet/outlet on base with 5 hp 230/460 volt motor, nominally rated 60 GPM serial# 330089-03.

2 Photos

70 GPM, Tri-Clover #TCIP3-NLD, Positive Displacement Pump, 0.07 Gallon, 5 HP, 1750 RPM, 208-230/460 V, 1000 RPM speed

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: TCIP3-NLD

Tri- Clover Positive Displacement Pump - Model No: TCIP3NLD-20MFY415H-A0-DM31, Serial No: 541550-01. Four ButterFly Lobed Rotor. Motor Drive - ID: 7401647001EK, NO: 6079163-56-NE, Size: 3-184TC-DM2A-5.1-A1, MTG Pos: A1, Ratio: 5.1, Input RPM: 1750, Output RPM: 346, HP Cap: 5.30 HP, Torque Cap: 910 IN/LB. Baldor ...more

10 Photos Video

115 GPM @ 60 psi, Tri-Clover #PRRED125-2/12M-TC1-4-SL, Positive Displacement Pump, 0.27 Gallons, 5 HP, 1750 RPM, 180 V, 426.83 RPM speed

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRRED125-2/12M-TC1-4-SL

Tri Clover PRRED125 Positive Displacement Pump. Model: PRRED125-2/12M-TC1-4-SL. S/N: V1081. Capacity: 115 gpm @ 60 psi. Double mechanical seals with water flush. Vented pressure relief cover. Reliance Electric MinPak Plus VSdrive, input: 230 VAC, 35 amps, single phase, 50/60 Hz, output: 180 VDC, 25 amps, DC field: 200 ...more

120 GPM @ 20 psi, Tri-Clover #PRR125-3M-UH4-LS-S, Rotary Lobe Positive Displacement Pump, 0.3 Gallons, 7.5 HP, 1745 RPM, 208-230/460 V, 400 RPM speed

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRR125-3M-UH4-LS-S

Tri-Clover Rotary Lobe Positive Displacement Pump. Model: PRR125-3M-UH4-LS-S. Serial: T1308J. Ladish Co. Maximum pump flowrate: 120 GPM at 20 PSI. Pump displacement per revolution: 0.3 gallons. Includes: stainless steel 4-lobe rotors, pressure relief faceplate cover, cart. Gear ratio: 18 (97 final RPM). US Motors: 7.5 ...more

120 GPM, Tri-Clover #PR125-3-UC4-ST-S, Positive Displacement Pump, 5 HP, 1150 RPM, 230/460 V

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR125-3-UC4-ST-S

Tri-Clover Positive Displacement Pump. Model: PR125-3-UC4-ST-S. Flow rate for new pump is 120 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. No rotors. Pulleys dia: 5 in. driver, 1 ft. 2 in. driven. Teco Electric ...more

120 GPM, Tri-Clover #PR125-3-UC4-ST-S, Positive Displacement Pump, 10 HP, 1760 RPM, 208-230/460 V

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR125-3-UC4-ST-S

Tri-Clover Positive Displacement Pump. Model: PR125-3-UC4-ST-S. Flow rate for new pump is 120 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Baldor Electric motor: 10 Hp, 1760 Rpm, 208-230/460 V, 28.5-28.4/14.2 A ...more

120 GPM, Tri-Clover #PRRED125-2-1/2-UH4-SL-S, Positive Displacement Rotary Lobe Pump, 30 Gallons, 10 HP, 1740 RPM, 230/460 V, (2) 2.5" NPT Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRRED125-2-1/2-UH4-SL-S

Tri Clover Positive Displacement Rotary Lobe Pump. Model: PRRED125-2-1/2-UH4-SL-S. S/N: P1953J. Flow rate for new pump is 120 gpm with required horsepower and pressure. *Note: the rotors are missing and the gear drive was removed. Inlets/outlets: (2) 2 in. dia. NPT. Overall dimensions: 5 ft. L x 1 ft. 4 in. W x 2 ft. ...more

300 GPM, Tri-Clover #PR300, Rotary Positive Displacement Pump, 63 Gallons, 7.75" rotor size, (2) 6" diameter flange Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300

Tri Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Char-Lynn Hydraulic drive no. 119 1031 003. Inlet/Outlet: (2) 6 in. dia. ...more

300 GPM, Tri-Clover #PR300, Rotary Positive Displacement Pump, 7.75" rotor size, (2) 6" diameter flange Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300

Tri-Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. (2) Flanges diameter: 6 in. (8) mounting holes 7/8 in. dia. Adjacent: 3-3/4 ...more

300 GPM, Tri-Clover #PR300-4-N4-ST-N, Positive Displacement Pump, 1.26 Gallons, 20 HP, 1750 RPM, 230/460 V, 238 speed

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300-4-N4-ST-N

Tri-Clover Positive Displacement Pump. Model: PR300-4-N4-ST-N. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Sterling Electric motor: 20 Hp, 1750 Rpm, 230/460 V, 48.3/24.15 A, 60 Hz ...more

300 GPM, Tri-Clover #PR300-4-TC1-4-SL-S, Positive Displacement Pump, 63 Gallons, 100 RPM speed, (2) 6" diameter flange Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300-4-TC1-4-SL-S

Tri Clover PR300 Rotary Pump. Model: PR300-4-TC1-4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Missing motor. (2) 6 in. dia. flange. (8) 7/8 in. dia. ...more

300 GPM, Tri-Clover #PR300-4-TC1-4-ST-S, Positive Displacement Pump, 0.63 Gallon, 20 HP, 1770 RPM, 200-230/460 V, 1770 RPM speed

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300-4-TC1-4-ST-S

Tri-Clover Rotary Pump. Model: PR300-4-TC1-4-ST-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Electric motor: 20 HP, 1770 RPM, 200-230/460 V, 49.2/24.6 A, 60 ...more

300 GPM, Tri-Clover #PRE300-4M-UH4-SL-S, Positive Displacement Pump, 10 HP, 1755 RPM, 230/460 V, 850 RPM speed, (2) 4" S-Line, Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRE300-4M-UH4-SL-S

Tri-Clover Positive Displacement Pump. Model: PRE300-4M-UH4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Sterling Electric motor: 10 Hp, 1755 RPM ...more

300 GPM, Tri-Clover #PRE300-4M-VC4-SL-S, Positive Displacement Pump, 10 HP, 1755 RPM, 230/460 V, 500 RPM speed, (2) 4" Tri-clamp Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRE300-4M-VC4-SL-S

Tri Clover PRE 300 Positive Displacement Pump. Model: PRE300-4M-VC4-SL-S. S/N: V9813. Ports: 4 in. Tri-clamp fittings. Flow rate for a new pump is 300 gpm at max rpm of 500. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Pump has mechanical seals. Drive ...more

Tri-Clover #PR300-4-TC1-2-ST-S, Rotary Positive Displacement Pump

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300-4-TC1-2-ST-S

Tri-Clover Rotary Pump. Model: PR300-4-TC1-2-ST-S. S/N: R1059. Overall dimensions: 1 ft. 9 in. L x 11-1/2 in. W x 1 ft. 5-1/2 in. H.

9 Photos

Tri-Clover #PR300-4-UC4-ST-S, Rotary Positive Displacement Pump Gear Case, 21.375" L x 10.5" width x 17.5" H

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR300-4-UC4-ST-S

Tri-Clover Rotary Pump Gear Case. Overall dimensions: L. 1 ft. 9-3/8 in. x W. 10-1/2 in. x H. 1 ft. 5-1/2 in.

Tri-Clover #PR60-2-UC4-ST-S, Rotary Positive Displacement Pump, (2) 2.5" ACME Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR60-2-UC4-ST-S

Tri-Clover Rotary Pump. Model: PR60-2-UC4-ST-S. S/N:TC533. Input / output (2) ACME fittings: 2-1/2 in. Overall dimensions: 1 ft. 4-3/4 in. L x 9 in. W x 1 ft. 2 in. H.

8 Photos

Tri-Clover #PR60-3-TC1-4-SL-S, Rotary Positive Displacement Pump, 16.75" L x 9" width x14" H

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR60-3-TC1-4-SL-S

Tri Clover Rotary Pump. Model: PR60-3-TC1-4-SL-S. S/N: U0084. Overall dimensions: 1 ft. 4-3/4 in. L x 9 in. W x 1 ft. 2 in. H.

Tri-Clover #PR60-3-UC4-ST-S, Positive Displacement Pump Body, 16.75" L x 9" width x14" H

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR60-3-UC4-ST-S

Tri-Clover Positive Displacement Pump Body. Model: PR60-3-UC4-ST-S. Overall dimensions: 1 ft. 4-3/4 in. L x 9 in. W x 1 ft. 2 in. H.

Tri-Clover #PR60-3-UC4-ST-S, Rotary Pump Gear Box, 16.75" L x 9" width x14" H

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PR60-3-UC4-ST-S

Tri-Clover Rotary Pump Gear Box. Model: PR60-3-UC4-ST-S. Serial No: V6790. Overall dimensions: 1 ft. 4-3/4 in. L. x 9 in. W. x 1 ft. 2 in. H.

Tri-Clover #PRED60-2M-TC1-4-SL-S, Rotary Positive Displacement Pump, 16.75" L x 9" width x14" H

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRED60-2M-TC1-4-SL-S

Tri Clover Rotary Pump. Model: PRED60-2M-TC1-4-SL-S. S/N: R5772. Overall dimensions: 1 ft. 4 3/4 in. L x 9 in. W x 1 ft. 2 in. H.

Tri-Clover #PRRED125-2.5-UC4-SL-S, Tri-Clover Steel positive displacement pump, 10 HP, 2.5" inlet/outlet

Machinery & Equipment Co | Brisbane, CA

415-64... (Show) 415-649-9611

Seller: Machinery & Equipment Co

Location: Brisbane, CA

Mfr: Tri-Clover

Model: PRRED125-2.5-UC4-SL-S

Tri-Clover positive displacement pump, Model PRRED 125-2.5-UC4-SL-S, constructed of stainless steel. s 2-1/2" ACME threaded in/out ports and a 10 HP Reeves variable speed drive. Drive requires repair. Includes integrated pressure relief bypass valve. Ideal for sanitary fluid transfer applications., HP: 10, Basis: FOB ...more

3 Photos

Tri-Clover #PRRED25-3-UH4-ST-S, Positive Displacement Pump, 4.5" rotor, (2) 3" ACME Inlet/Outlet

Genemco | Hearne, TX

Seller: Genemco

Location: Hearne, TX

Mfr: Tri-Clover

Model: PRRED25-3-UH4-ST-S

Tri-Clover Positive Displacement Pump. Model no. PRRED25-3-UH4-ST-S. S/N: W4131. (2) 4-1/2 in. rotors. Inlet/outlet: (2) 3 in. ACME. Overall dimensions: 1 ft. 2 in. L x 1 ft. 1/2 in. W x 10-1/2 in. H.

Tri-Clover #PRRED3-1S-UC6-ST-S, rotary positive displacement pump, 1 HP, 1.5" inlet/outlet

Machinery & Equipment Co | Brisbane, CA

415-64... (Show) 415-649-9611

Seller: Machinery & Equipment Co

Location: Brisbane, CA

Mfr: Tri-Clover

Model: PRRED3-1S-UC6-ST-S

Tri-Clover Positive Displacement Pump - Model PRRED3-1S-UC6-ST-S, rotary type with 1.5 inlets/outlets. Driven by a 1 HP, 208-230/460V motor. s 2 rubber lobes for efficient material transfer., HP: 1, Basis: FOB, Contact Parts: Stainless Steel, Inlet and Outlet: 1.50" Diameter.