26 Results
14" Chipper/Waferizer/Shredder, floor mounted, up to 14" diameter x any length, 200 HP, 1770 RPM, 575 V
MachineCo | Montreal, QC
Category: Wood Chippers
Seller: MachineCo
Location: Montreal, QC
“This unit was used only in a wood products laboratory experimental operation, so seems very little used. It was outside for a bit so is a bit rusty on some exposed parts. We warranted the motor to be in good condition and also the bearings.”, 200 HP Chipper / Waferizer / Shredder. floor-mounted ...more
35" Rader #35x45ESW, Chip Feeder, 35" x 45" wood chipper opening
Lenmark Industries | Langley, BC
Category: Wood Chippers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Rader
Model: 35X45ESW
SKU: 111377, Model: 35x45ESW, Condition: Used, S/N: T1204, Dimensions: 72.50 (H) x 46.00 (W) x 82.00 (L) inches, Additional :, Wood chipper opening:35 in. x 45 in., Type: ESW.
48" Soderhamn, Portable Chipper With Diesel Engine
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Soderhamn
Soderhamn 48" Chipper, M671 Diesel Engine, Mounted on trailer.
58" Precision #58-60-16, Drop Feed Chipper, 6 knife, 150 HP motor
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Precision
Model: 58-60-16
Precision 58" Chipper - Model 58-60-16, 6 Knife, 150 HP Motor.
96" Morbark Staionary Wood Chipper, 1000 HP motor, 4 knife, 2008
George Washington Machinery | East Wenatchee, WA
Category: Wood Chippers
Seller: George Washington Machinery
Location: East Wenatchee, WA
Mfr: Morbark
Year: 2008
Get email updates for newly added Wood Chippers
Woodchippers handle breaking down wood waste into small, usable chips, ideal for biomass, mulch, or waste management. Models include stationary, horizontal, and disc types, equipped with features like adjustable feed rates and heavy-duty cutting blades.
96" Precision Chipper, 4 knife, 125 tons per hour, 1991
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Precision
Year: 1991
The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA., - Model 96.27, - Horizontal feed, - Side discharge, - 4-Knife whole log chipper, - 8" thick chipper disc, - Built in disc brake, - Extended ...more
112" Fulghum, 10-Knife Chipper
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fulghum
Fulghum 10-Knife Chipper, 1500 HP Rebuilt motor is available.
113" Nicholson Flat Drum Chipper, 9' 5" x55", Trailer, AC power, belt conveyor, switch gear option
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Nicholson
Nicholson Flat Drum Chipper, 9'5' x 55", Includes: Trailer, AC power, belt conveyor, switch gear option., System chipped just over 120 truckloads.
116" CEM Machine Inc, 1000 HP electrically driven, 116" log chipper
BMI Group | Tillsonburg, ON
Category: Wood Chippers
Seller: BMI Group
Location: Espanola, ON
Mfr: Cem Machine Inc
Year: 2012
CMI, 116 inch, 1000 hp wood chipper, 1000 hp, GE, Induction Motor - can be included, Has a spare rotating unit available, Unit is still installed in a woodrooom and removal costs will be part of the sale.
Bruks #BK-DH-400X800L, Chipper Line, Drum Style, 32" Infeed Conveyor, 422 HP, 150 hours
Ex-Factory | Charlotte, NC
Category: Wood Chippers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bruks
Model: BK-DH-400X800L
BRUKS-KLOCKNER - BK-DH: 400 x 800 - L Chipper Line with: 315 kW (422 HP) DriveComplete with: -- 422 HP Main Drive Motor with: Electrical Cabinet with starter. (VFD drive to be verified.) -- Powered Infeed System. -- 32" Infeed vibrating Conveyor with: Fiberglass Section. -- Chain outfeed Conveyor. -- s: MESUTRONIC ...more
CBI #4000, Portable Grinder
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cbi
Model: 4000
CBI 400 Grinder.
General Electric, Chip Mill Motor, 1500 HP, Low RPM, rebuilt 2024
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: General Electric
This motor was rebuilt in 2024 for a chip mill and never put into production. It is ready to ship immediately., 1500 HP, 356 RPM.
Jeffrey Rader 1500 HP Wood Hog, Model 610 WLE Endurahog
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jeffrey
Model: 610
Jeffrey Rader 1500 HP Wood Hog, Model 610 WLE Endurahog.
Mccloskey C3, Wood Chipper, 1216 hours, S/N: 90453, 2020
Madisa - Heavy Machinery | Santa Catarina,
Category: Wood Chippers
Seller: Madisa - Heavy Machinery
Location: Santa Catarina,
Mfr: Mccloskey
Model: C3
Year: 2020
Peterson 4310B, Wood Chipper, 434 hours, S/N: 46B-133-2843, 2023
Cleveland Brothers Equipment | Harrisburg, PA
Category: Wood Chippers
Seller: Cleveland Brothers Equipment
Location: Harrisburg, PA
Mfr: Peterson
Model: 4310B
Year: 2023
Regulatory Marking, Regulatory Status, Ultra Low Sulfur Diesel Fuel.
Peterson 5710D, Grinder, 5899 hours, S/N: 040D-102-2089, 2015
Carter Machinery Co. Inc. - Machinery | Salem, VA
Category: Wood Chippers
Seller: Carter Machinery Co. Inc. - Machinery
Location: Richmond, VA
Mfr: Peterson
Model: 5710D
Year: 2015
1050 HP C27 TIER 2 ENGINE, 3 6" GRATES-ALL NEW, Air Compressor, FIRE SUPPRESSION SYSTEM, NEW 8"GRATES @ NUMBER 1, PETERSON 5710D HORZL GRINDER, TRIPLE GROUSER 600MM TRACKS.
Peterson 5900, Wood Chipper, 19462 hours, S/N: 35-16-1587, 2008
Ironmart - Used Equip. | West Columbia, SC
Category: Wood Chippers
Seller: Ironmart - Used Equip.
Location: Yemassee, SC
Mfr: Peterson
Model: 5900
Year: 2008
Precision 400 HP Chipper Chip Plant, 12' above ground infeed
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Precision
Complete chip plant includes:, - The infeed is 12′ above ground level. They were feeding it one log at a time with a shovel., - There is a single chain 12” wide leading to the debarker., - The debarker is a Salem 20” ring debarker with mcdiarmond controls., - From the debarker it goes through I think ...more
Vantec #PT1000/R10 Horizontal Drum Chipper, used in production of wood chips from logs and wood residues
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT1000/R10
This Drum chipper is used in production of wood chips from logs and wood residues (slabs, board off cuts, veneer waste). It has a toothed driven roller system that allows an efficient infeed of the material, rotor with interchangeable thread locks and with a disposable steel plate in the front of the rotor, hydraulic ...more
Vantec #PT600 Horizontal Drum Chipper, used to produce chips from logs and veneer waste
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT600
The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance., Manufacturer :, - Width of inlet: 600 mm;, - Height: 200 mm;, - Rotor diameter: 600 mm;, - Toothed roller: 01 upper and ...more
Vantec #PT600/R8 Horizontal Drum Chipper
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT600/R8
This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It ...more
Vantec #PT600/R8, Horizontal Drum Chipper, 2024
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT600/R8
Year: 2024
Vance PT600R8 Drum Chipper, See this machine at IWF Atlanta 2024!, This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for ...more
Vantec #PT750/R8 Horizontal Drum Chipper
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT750/R8
This Wood Drum chipper PT750 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, rubberized conveyor belt and Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does ...more
Vermeer SC70TX, Wood Chipper, 617 hours, S/N: 1VRK1203PN1003182, 2022
Ziegler Cat - Used | Minneapolis, MN
Category: Wood Chippers
Seller: Ziegler Cat - Used
Location: Minneapolis, MN
Mfr: Vermeer
Model: SC70TX
Year: 2022
Tracks, Horsepower 67.0 hp.
Vermeer SC70TX, Wood Chipper, 641 hours, S/N: 1VRK1203EN1003159, 2022
Ziegler Cat - Used | Minneapolis, MN
Category: Wood Chippers
Seller: Ziegler Cat - Used
Location: Minneapolis, MN
Mfr: Vermeer
Model: SC70TX
Year: 2022
Tracks, Horsepower 67.0 hp.
Vermeer WC2300XL, Wood Chipper, 3487 hours, S/N: 1VRC302J1E1001038, 2014
Ironmart - Used Equip. | West Columbia, SC
Category: Wood Chippers
Seller: Ironmart - Used Equip.
Location: Walterboro, SC
Mfr: Vermeer
Model: WC2300XL
Year: 2014
