1 - 50 of 95 listings
A & V #AV10005BA-5X, waterjet, 6' x 10' table, 50 HP, 55000 psi, PC based Windows 7, 2016
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: A&v
Model: AV10005BA-5X
Year: 2016
Table Width, 6', Table Length, 10', Control, PC Based Windows 7, Pump, 50 HP, Max Cutting Pressure, 55,000 PSI, Power Requirement, 480/3/60.
Baileigh #WJ-4X4CNC, CNC waterjet, 48" x 48" table, 48" X, 48" Y, 6.75" Z, 58,000 psi pump
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: WJ-4X4CNC
Table Size 59" x 59" Working Table Size 48" x 48" Working Table Travel (X/Y) 48" / 48" X Axis Travel 48" Y Axis Travel 48" Z Axis Travel 6.75" Travel Speed 40 fpm Max. (26 fpm Cutting) Repeatability Accuracy +/- 0.001" Cutting Accuracy +/- 0.001" Production Pressure 56,000 psi Maximum Flow Rate 7.92 gal/minute Orifice ...more
Bystronic #ByJet-3015, 5' x10'tbl., 55000 psi, 120" X, 60" Y, 9.84" Z, 50 HP, 1999
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Bystronic
Model: BYJET-3015
Year: 1999
Bystronic 3015, New 1999, Under 3800 Hours. 5'x10', 55K PSI, 50HP, Dual Cutting Heads, Height Sensing, Koolant Kooler, Bystronic Byjet 3015 CNC Abrasive Dual Head Water Jet Cutting System, Age: 1999 Installed 2000, Cutting Area. 5' x 10', Intensifier Output. 55,000 PSI, Motor Size. 50 H.P., Z-Axis. ...more
CMS Tecnocut #Idroline-S2040, 5-Axis CNC waterjet, like new, 2019
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Cms
Model: IDROLINE-S2040
Year: 2019
THE IDROLINE S 2040 WATERJET, CUTTING SYSTEM CONCEIVED AND MANUFACTURED, AS A MACHINE TOOLS. ESPECIALLY SUITABLE FOR INTENSIVE USE AND MEDIUM/TIGHT TOLERANCES., AN OUTSTANDING COMPROMISE OF ACCURACY,RELIABILITY AND TOP PERFORMANCE, IDROLINE S, IS IDEAL FOR ANY KIND OF FABRICATION PROCESS., IT ALSO PERFECTLY FITS ...more
Denver #Aqua, 5-Axis waterjet, 60000 psi, 157.4" X, 78.7" Y, 9.8" Z, Hypertherm 50 intensifier, 2019
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Denver
Model: AQUA
Year: 2019
2019 DENVER AQUA 5-AXIS, Pump PSI. 60,000 PSI, X-Axis. 157.4", Y-Axis. 78.7", Z-Axis. 9.8", HYPOTHERM 50 INTENSIFIER, APPROX. 1,000 HOURS SINCE NEW.
Get email updates for newly added Waterjet Cutters
Waterjet Cutters (also known as water jet cutting machines) use high-pressure streams of water, often mixed with abrasives, to cut through materials like metal, stone, and glass. Commonly used in industries such as aerospace, automotive, and manufacturing, waterjet cutters provide precise, clean cuts without generating heat. They are ideal for materials that are sensitive to high temperatures or require intricate cutting.
Flow #25X, waterknife intensifier pump with 2382 hours, 200 HP, 60000 psi, 2006
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: 25X
Year: 2006
2006 FLOW 25X, Dimensions. 75" x 62" x 72" H, Weight. 8,800 lbs.
Flow #3M2-1313b, 60000 psi, 48" X, 48" Y, 7" Z, 30 HP, hopper, 2012, #A6749
Sterling Machinery Exchange | South El Monte, CA
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Flow
Model: 3M2-1313B
Year: 2012
Pump Output Rate 60,000 PSI Table Size 51.1" x 51.1" X Axis Travel 48" Y Axis Travel 48" Z Axis Travel 7" Horsepower 30 H.P. s Flowmaster Version 6 Software 6 Bags Of Garnet Flow CNC Controller With Movable Pedestal New Set Of Slats From Aerospace Manufacturer Hopper.
Flow #4X2MWMC, 6.5' x13' tbl, 60k psi, 100 HP, dual head, FlowMaster software, 2001, #A6373
Sterling Machinery Exchange | South El Monte, CA
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Flow
Model: 4X2MWMC
Year: 2001
Work Envelope 144" x 78" Pump 100 H.P. Max Operating Pressure 60,000 PSI Abrasive Hopper Capacity 500 Lbs. Max Speeds 400IPM Table Size 156”x78” s Flowmaster Software Package Upgrade Version 6.7 In Pump Water Filtration System High Pressure Lines & Fittings Computer Completely Upgraded To Solid State Drive And ...more
Flow #50IS, waterjet intensifier, 60000 psi, 50 HP, 2025
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: 50IS
Year: 2025
Brand new Flow 50iS Intensifier Pump - in crate!, Flow 50iS Waterjet Intensifier - Brand New!, Pump Motor: 50 HP, Pump Pressure: 60,000 PSI.
Flow #712127-1, waterjet cutting system, 4' x8'tbl., 30 HP, 55000 psi, 2004
Sterling Machinery Exchange | South El Monte, CA
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Flow
Model: 712127-1
Year: 2004
Capacity 4' x 8' Horsepower 30 H.P. PSI 55000 s Windows Based Flow Master FlowCut Software Guaranteed By Flow Dealer Garnet Hopper.
Flow #IFB-4400, waterjet cutting system, 4' X, 4' Y, 6" Z, 30 HP, 55000 psi, 2005
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4400
Year: 2005
Flow IFB 4400 - Upgraded by Flow and in excellent condition!, Flow IFB 4400 Waterjet Cutting System, New: 10/2005, Travels: 4 x 4, Z-Axis: 6, Pump Motor: 30 HP, Pump Pressure: 55,000 PSI, Paser ECL Plus Cutting Head, Dynamic Cutting, 2012 Upgraded Control & Software - FlowPath Version 6, FlowCut Version 6.7 ...more
Flow #IFB-4400, waterjet cutting system, 4' X, 4' Y, 6" Z, 30 HP, 60000 psi, 2006
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4400
Year: 2006
Flow IFB 4400 Dynamic Waterjet Cutting System - 2006, 30HP, 60K PSI, Dynamic; Hopper, Garnet Removal, Flow IFB 4400 Dynamic CNC Waterjet Cutting System, New: 2006, Cutting Area:, X-Axis: 4', Y-Axis: 4', Z-Axis: 6", Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, Flow CNC Control with FlowPath/FlowCut/FlowNest ...more
Flow #IFB-4800, CNC waterjet cutter, 4' x8' table, 30 HP, 55000 psi, Flowmaster PC Control, 2004
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4800
Year: 2004
Flow IFB 4800 CNC Waterjet Cutting System, Flow IFB 4800 Waterjet Cutting System, New: 2004, Table Width: 4, Table Length: 8, Pump Motor: 30 HP, Pump Pressure: 55,000 PSI, Travels: 4x8, Flowmaster PC Based Control, 600 Lb Abrasive Bulk Tank w/ Low/Out sensor tied to controller, Flow 30 HP Hyplex Pump, Flying Bridge ...more
Flow #IFB-4800, waterjet cutter, 4' X, 8' Y, 9" Z, 50 HP, 60000 psi, Flowmaster, 2004
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4800
Year: 2004
Flow IFB 4800 Waterjet Cutting System - New 2004, Flow IFB 4800 4x8 Dynamic CNC Waterjet Cutting System, New: 2004 S/N: 313394, Table Width: 4', Table Length: 8', Travels: 4' x 8' x 9", Control: Flowmaster, Pump: 50 HP, Max Cutting Pressure: 60,000 PSI, Power Requirement: 460-480/3/60, Speed Range: 500 ...more
Flow #IFB-4800, waterjet cutting, 4' x8'tbl., 50 HP, 60000 psi, Dynamic cutting head, 2005
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4800
Year: 2005
Flow IFB 4800 Waterjet Cutting System w/ Dynamic, Flow IFB 4800 CNC Waterjet Cutting System, New: 2005, Table Width: 4', Table Length: 8', Pump Motor: 50 HP, Pump Pressure: 60,000 PSI, Flow PC-Based Control with Upgraded Computer from Flow (approx. 1 year old), Dynamic Cutting Head w/ Taper Compensation ...more
Flow #IFB-4800, waterjet cutting system, 4' X, 8' Y, 8" Z, 50 HP, 87000 psi, Dynamic cutting head, 2008
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-4800
Year: 2008
2008 Flow IFB 4800 Dynamic Waterjet Cutting System, Flow IFB 4800 Dynamic CNC Waterjet Cutting System, New: 2008, Travels:, X-Axis: 4, Y-Axis: 8, Z-Axis: 8, Pump Motor: 50 HP, Pump Pressure: 87,000 PSI, Dynamic Cutting Head, Updated Flow Software with New PC, Hopper.
Flow #IFB-6024, wayerjet, 50 HP, 60000 psi, 6' x 24' work envelope, 8" motorized Z-Axis, 2008
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: IFB-6024
Year: 2008
Work Envelope 6' x 24', Z-Axis Travel (Motorized) 8", Intensifier Pump Output 60,000 PSI, Intensifier Pump Motor 50 HP, Linear Positional Accuracy +- 0.003", Repeatability +- 0.002", Rapid Traverse Maximum 500 IPM, Contouring Range 0 - 300 IPM.
Flow #IFB-6024, waterjet cutting system, 100 HP, 87000 psi, chiller, 2008
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: IFB-6024
Year: 2008
Flow IFB Dynamic 6x24; 87K PSI, 100HP Pump, Chiller, Spare Parts, Tools, 8K Hours, Flow IFB 6x24 CNC Waterjet Cutting System, New: 2008, Bed Size: (2) 6.5' x 12', Cutting Area: 6' x 24', Motorized Z-Axis: 8", Pump Motor: 100 HP, Pump Pressure: 87,000 PSI, Max Cutting Speed: 300 IPM, Flow PC-Based ...more
Flow #M3B-7320, waterjet, 50 HP, 87000 psi, 6.6' x 24' table, 500 IPM, 460-480 V., 2016
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: M3B-7320
Year: 2016
Table Width 6.6', Table Length 24', Table Travels 6.6' x 24' x 7", Pump 50 HP, Max Cutting Pressure 87,000 PSI, Max Rapid Traverse Speed 500 IPM, Power Requirement 460-480/3/60.
JUST ADDED!
Flow #Mach-100-3120, waterjet, 10' x 6.6'table, 60000 psi, 30 HP, FlowMaster software, 2018
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-100-3120
Year: 2018
for FlowMach 100 3120, Flow Mach 100 3120 Core, Table / Work Envelope, Table size: 10 ft × 6.6 ft ( 3.05 m × 2.0 m), Typical configuration name: 3020 / 3120 class machine, Motion & Accuracy, Rapid traverse speed: up to 400 IPM (10.16 m/min), Linear positioning accuracy: 0.003 in (0.076 mm) ...more
Flow #Mach-2-1313B, CNC waterjet cutting system, 48" X, 48" Y, 7" Z, 30 HP, 60000 psi, 2009
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-2-1313B
Year: 2009
2009 Flow Mach 2 1313b CNC Waterjet Cutting System, Flow Mach 2 1313B CNC Waterjet Cutting System, New: 2009, Cutting Area:, X-Axis: 48, Y-Axis: 48, Z-Axis: 7, Table Size: 4.3 x 4.3, Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, Flow PC-Based CNC Control with FlowPath, FlowCut, and FlowNest, Abrasive Mini Hopper, 30 ...more
Flow #Mach-2-1313B, waterjet cutting system, 4' X, 4' Y, 7" Z, 60000 psi, 30 HP, 30SA-60 pump, 2012
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-2-1313B
Year: 2012
Flow Mach 2 1313B, 4'x4', 60K PSI, 3100 hours!, Flow Mach 2 1313B 4'x4' CNC Waterjet Cutting System, New: 2012, ONLY 3100 HOURS, - Travels: 4 x 4 x 7 in Z, - Table size: 50 x 50, - Max. pressure: 60,000 psi, - Pump motor: 30 HP, - X & Y Linear positioning: +/-.005 in 3, - Repeatability: +/-.002, - ...more
Flow #Mach-2-1313B, waterjet cutting system, 4.3'X, 4.3'Y, 7" Z, 30 HP, 55000 psi, Flow PC-Based Control, 2014
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-2-1313B
Year: 2014
2014 Flow Mach 2 1313B, Flow Mach 2 1313B CNC Waterjet Cutting System, New: 2014, Cutting Area: 4.3' x 4.3', Z-Axis Travel: 7", Pump Motor: 30 HP, Pump Pressure: 55,000 PSI, Flow PC-Based Control, Hopper, Miscellaneous Spares as Available.
Flow #Mach-2-1313B, CNC waterjet cutting system, 4.3'X, 4.3'Y, 7" Z, 30 HP, 60000 psi, 30SA-60 ESL intensifier pump, 2017
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-2-1313B
Year: 2017
Flow Mach 2 1313b CNC Waterjet Cutting System - 131 hours!, Flow Mach 2 1313b CNC Waterjet Cutting System, New: 2017; Installed 2019, Travels:, X-Axis: 4'3", Y-Axis: 4'3", Z-Axis: 7", Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, FlowMaster PC-Based Roll-Around Controller w/ FlowMaster Software Package ...more
Flow #Mach-2-1313B, waterjet cutting system, 4.3'X, 4.3'Y, 7" Z, 30 HP, 60000 psi, 30SA-60 ESL intensifier pump, 2019
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-2-1313B
Year: 2019
2019 Flow Mach 2 1313b 4x4 Waterjet, Flow Mach 2 1313b CNC Waterjet Cutting System, New: 2016/2019, Travels:, X-Axis: 4'3", Y-Axis: 4'3", Z-Axis: 7", Rapid Traverse: 400 IPM, Contouring Speed: 200 IPM, Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, Flowmaster PC-Based Controller, Fully Programmable Precision ...more
Flow #Mach-2-2031B, CNC waterjet cutting machine, Flowmaster PC Control, 50 HP, 60000 psi, 2015
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-2-2031B
Year: 2015
2015 FLOW MACH 2-2031B, Pump PSI. 60,000 PSI, Table Size-W. 6.6', Table Size-L. 10', Power. 50 hp, Flowmaster PC CNC Control, 766 hours on old soft start box, Recently replaced soft start box with 0 hrs, Extra new intensifier, Intensifier recently rebuilt, Water softener with a skid of salt pellets, Water ...more
Flow #Mach-2-2040C, Dynamic waterjet, 6.5' x 13', 2012
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-2-2040C
Year: 2012
2012 FLOW MACH 2 2040C, Pump PSI. 60,000 PSI, X-Axis. 6.5', Y-Axis. 13', Z-Axis. 6", Accuracy. 0.005", Repeatability. 0.002", Power. 30 hp, Cut Speed. 800 ipm, Traverse Speed. 800 ipm, Control. CNC, 30 SA-60 30 HP 60,000 PSI Intensifier, Dynamic Head, Chiller, 480/3/60 Electrics, Good Condition As Taken From ...more
Flow #Mach-200-1313-Pivot, 5-Axis CNC waterjet, open gantry, 3-sided access for loading, 2019
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-200-1313-PIVOT
Year: 2019
Cutting area (1313): 4-3 × 4-3, Table type: Open gantry, 3-sided access for loading, Typical footprint: Compact shop footprint (exact depends on options), Rapid traverse speed: up to 400 in/min, Acceleration: ~0.05 g, Z-axis travel: 8 in, Accuracy, Linear positional accuracy: 0.002 in, Repeatability: 0.001 in ...more
Flow #Mach-200-4020, 6' x13'tbl., 60000 psi intensifier pump, 30 HP, 5-Axis, 2018
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-200-4020
Year: 2018
2018 Flow with 5-Axis Head, 6' x 13' Flow Mach 200 4020 CNC Waterjet Cutting System, Model: M200 4020 PIVOT+, Year: 2018, Table Width 6', Table Length 13', Max. Cutting Pressure 60,000 PSI, Pump 30 HP, Rapid Traverse 400 IPM, Flow Expert Control, 60,000PSI Intensifier Pump, Pivot + Is Flow 5 Axis Head ...more
Flow #Mach-200-4020-Pivot, CNC waterjet, 30 HP, 60000 psi, 6' x 13.4'table, hopper, 2020
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-200-4020-PIVOT
Year: 2020
2020 FLOW M200 4020 PIVOT, Pump PSI. 60,000 PSI, Z-Axis. 8", Table Size-W. 6', Table Size-L. 13.4', Power. 30 hp, Control. CNC, PIVOT POINT HEAD, 30 HP 60,000 PSI HYPLEX PRIME PUMP, HOPPER, ONLY 841.3 HOURS, iNSPECT IN SOUTHERN CA.
Flow #Mach-200-4020-Pivot, CNC Waterjet Cutting System, 6' x 13' table, 30 HP, 60000 PSI, 2020
Wheeler Machinery Sales | Pomona, CA
Category: Waterjet Cutters
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Flow
Model: MACH-200-4020-PIVOT
Year: 2020
2020 Flow M200 4020 Pivot CNC Water Jet Cutting System 6' x 13' #6937, Table Width 6', Table Length 13', Max. Cutting Pressure 60,000 PSI, Pump 30 HP, Rapid Traverse 400 IPM, Flow Expert Control, 60,000PSI Intensifier Pump, Pivot + Is Flow 5 Axis Head, 900 lbs Abrasive Hopper, Automatic Collision ...more
Flow #Mach-200-4020-Pivot-Plus, CNC Waterjet Cutter, 6' 6" x13' 1" tbl., 30 HP, 60000 psi, Flow Xpert Control, 2020
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-200-4020-PIVOT-PLUS
Year: 2020
2023 Flow Mach 200 4020 Pivot+, 30 HP, 60K PSI, Pivot Head, Flow Mach 200 4020 Pivot+ CNC Waterjet Cutting System, New: 2020, Table Width: 6'6", Table Length: 13'1", Z-Axis: 8", Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, Flow Xpert Control, 30 HP 60K PSI Hyplex Pump, 5-Axis Pivot + Bevel and Taper ...more
JUST ADDED!
Flow #Mach-200-4020-X5, CNC Water Jet Cutting System, 60,000 psi, 6' x13' table, 1732 hours, 2021
Wheeler Machinery Sales | Pomona, CA
Category: Waterjet Cutters
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Flow
Model: MACH-200-4020-X5
Year: 2021
2021 FLOW Mach 200 4020 Pivot CNC Water Jet Cutting System #8186, Machine :, Table size: 1828.8 mm x 3962.4 mm (72 in. x 156 in.), Pump operating pressure: 60,000 psi, Z-axis travel: 203 mm (8 in.), Catcher tank load rating, Mild steel: 1465 kg/m (300 lb/ft), Stainless steel: 977 kg/m (200 lb/ft), Acceleration: 0.05 ...more
Flow #Mach-3-1313B, waterjet cutters, 4' X, 4' Y, 6" Z, 30 HP, 55000 psi, Flowmaster PC-Based Control, 2009
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-1313B
Year: 2009
2009 Flow Mach 3 1313b, Flow Mach 3 1313b CNC Waterjet Cutting System, New: 2009, Cutting Area:, X-Axis: 4, Y-Axis: 4, Z-Axis: 6, Pump Motor: 30 HP, Pump Pressure: 55,000 PSI, Rapid Speed: 500 IPM, Linear Positioning Accuracy: +/- 0.003, X/Y Repeatability: +/- 0.002, Power Requirement: 460-480/3/60, Flowmaster ...more
Flow #Mach-3-1313B, CNC waterjet cutting system, 4' X, 4' Y, 6" Z, 30 HP, 60000 psi, 2011
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-1313B
Year: 2011
Flow Mach 3 1313b Dynamic CNC Waterjet Cutting System - 2011, Flow Mach 3 1313b Dynamic CNC Waterjet Cutting System, New: 2011, Cutting Area:, X-Axis: 4', Y-Axis: 4', Z-Axis: 6", Pump Motor: 30 HP, Pump Pressure: 60,000 PSI, Flow CNC Control with FlowPath/FlowCut/FlowNest Software, Dynamic Cutting, 250 Lb ...more
Flow #Mach-3-1313B, waterjet, 4.2' x 4.2' table, 50 HP, 60000 psi, 5-Axis, 2013
Manufacturing Solutions | Santa Ana, CA
Category: Waterjet Cutters
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Flow
Model: MACH-3-1313B
Year: 2013
4.2' x 4.2'50 HP60,000 PSI460-480/3/60+/- 60 Degrees7"+/-.003+/-.002500 IPM.
Flow #Mach-3-2513B, waterjet cutters, 5.2" x 9.6" table, 60000 psi, 50 HP, abrasive hopper, 2014
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-2513B
Year: 2014
Flow Mach 3 2513b CNC Waterjet Cutting System, Flow Mach 3 2513b CNC Waterjet Cutting System, New: 2014, Table Width: 5.2", Table Length: 9.6", Max Cutting Pressure: 60,000 PSI, Pump Pressure: 50 HP, Flow PC-Based Control, 50i-S Intensifier Pump, Taper Compensation 5-Axis Dynamic Cutting Head, Abrasive Hopper, Fully ...more
Flow #Mach-3-3020B, CNC waterjet, 100 HP, 94000 psi, CF900 hopper, 2018
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-3-3020B
Year: 2018
Flow #Mach-3-4020B, CNC waterjet cutting system, 6.5'x13.1' table, 50 HP, 87000 psi, Hyperjet intensifier pump, 2011
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2011
2011 Flow Mach 3 4020b CNC Waterjet Cutting System, Flow Mach 3 4020b CNC Waterjet Cutting System, New: 2011, Table Width: 6.5, Table Length: 13.1, Pump Motor: 50 HP, Pump Pressure: 87,000 PSI, Flowmaster PC-Based CNC Control, Hyperjet Intensifier Pump, Hopper.
Flow #Mach-3-4020B, waterjet, with Dynamic head, 50 HP, 87000 psi, 13' X, 6.6'Y, 7" Z, 2012
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2012
X-Axis: 13, Y-Axis: 6.6, Z-Axis: 7", Pump Motor: 50 HP, Pump Pressure: 87,000 PSI, Traverse Speed: 300 IPM, Electrics: 480V/60Hz/3Ph.
Flow #Mach-3-4020B, CNC waterjet cutting system, 50 HP, 94000 psi, 2013
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2013
Flow Mach 3 4020b Waterjet Cutting System, Flow Mach 3 4020b CNC Waterjet Cutting System, New: 2013, Travels:, X-Axis: 13'1", Y-Axis: 6'6", Pump Motor: 50 HP, Pump Pressure: 94,000 PSI, PC-Based Flow Roll Around Control w/ FlowMaster 6.3, Dynamic Contour Follower, Paser 4 Cutting Head, 94K PSI Hyperjet ...more
Flow #Mach-3-4020B, waterjet cutting system, 78.75" X, 157.5" Y, 7" Z, 50 HP, 60000 psi, chiller, 2013
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2013
Flow Mach 3, 78"x157"x7", 60HP, 60K PSI, Paser III Dynamic Cutting, Chiller, Hyperpressure Technology, Flow Mach 3 4020b Waterjet Cutting System, New: 2013, Travels:, X-Axis: 78.75, Y-Axis: 157.5, Z-Axis: 7, Max Traverse: 500 IPM, Pump Motor: 50HP, Pump Pressure: 60,000 PSI, Flow Paser III Dynamic Cutting Head ...more
Flow #Mach-3-4020B, waterjet cutting system, 6' X, 12' Y, 6" Z, 100 HP, 60000 psi, 2012
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2012
Flow Mach3 4020b, Dynamic, Flow Mach 3 4020b CNC Waterjet Cutting System, New: 2011, Cutting Area:, X-Axis: 6, Y-Axis: 12, Z-Axis: 6, Pump Motor: 100 HP, Pump Pressure: 60,000 PSI, Flow Master CNC Software, Dynamic Cutting Head, 500 Lb Hopper, Waterveyor System, Approx 4500 Hours.
Flow #Mach-3-4020B, waterjet cutting system, 78" X, 136" Y, 7" Z, 100 HP, Hyperpressure Hyperjet 87000 psi intensifier pump, 2016
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2016
2016 Flow Mach 3 4020B Waterjet Cutting System, Flow Mach 3 4020B Dynamic Waterjet Cutting System, New: 2016, Travels:, X-Axis: 78, Y-Axis: 136, Table Size: 6.6 x 13.3, Z-Axis: 7 Motorized, Pump Motor: 100 HP, Pump Pressure: 87,000 PSI, 15 Color Touch Screen, Hyperpressure Hyperjet 87K PSI Intensifier Pump, Dynamic ...more
Flow #Mach-3-4020B, Hyperjet waterjet cutting system, Hyperjet 951D intensifier pump, 2010
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2010
Flow Mach 3 4020B Hyperjet Waterjet Cutting System, Flow Mach 3 4020B Hyperjet Waterjet Cutting System, s/n: 110-11863, PC-Based Control with Flow Software, Hyperjet 951D Intensifier Pump, Dynamic Waterjet Cutting, Z-Axis Taper Control, Hopper.
Flow #Mach-3-4020B, waterjet cutting system, 72" X, 144" Y, 6" Z, 60000 psi, 2012
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-4020B
Year: 2012
Flow Mach3 4020b, Dynamic, Flow Mach 3 4020b CNC Waterjet Cutting System, New: 2012, Cutting Area:, X-Axis: 6, Y-Axis: 12, Z-Axis: 6, Pump Pressure: 60,000 PSI, Flow Master CNC Software, Dynamic Cutting Head, Hopper.
Flow #Mach-3-7320B, CNC waterjet cutting system, 6.6'x24'tbl., 50 HP, 94k psi, Ebbco chiller, Flow Hyperjet intensifier pump, 2016
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-7320B
Year: 2016
Flow 6'6" x 24' Waterjet, 50HP 94K PSI, Dynamic, Ebbco Chiller & More, Flow Mach 3 7320b CNC Waterjet Cutting System, New: 2016, Table Width 6.6', Table Length 24', Control Flowmaster Suite, Pump 50 HP, Max Cutting Pressure 94,000 PSI, Power Requirement 460-480/3/60, Flow Hyperjet Intensifier Pump ...more
Flow #Mach-300-3015-DWJ, CNC waterjet, 5' x10'tbl., 120" X, 60" Y, 12" Z, 50 HP, 94000 psi, 2018
Machinery Resources Intl | Simi Valley, CA
Category: Waterjet Cutters
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Flow
Model: MACH-300-3015-DWJ
Year: 2018
FLOW MACH 300 3015 DWJ CNC WATER JET, NEW: 2018, 5' x 10', 94,000 PSI HYPERJET, TABLE SIZE: 5' x 10', TRAVELS:, - X-AXIS: 120", - Y-AXIS: 60", - Z-AXIS: 12", INTENSIFIER HP: 50, INTENSIFIER PSI: 94,000, REPEATABILITY: (+/-) 0.0014", MAX. TRAVERSE RATE: 472 IPM, LINEAR STRAIGHTNESS ACCURACY: ...more
Flow #Mach-4-2513B, waterjet cutting system, 48" X, 96" Y, 6" Z, 50 HP, 94000 psi, 2011
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-4-2513B
Year: 2011
Flow Mach 4 2513b CNC Waterjet Cutting System w/ XD Head, Flow Mach 4 2513b CNC Waterjet Cutting System, New: 2011, Travels:, X-Axis: 4, Y-Axis: 8, Z-Axis: 6, Table Size: 4.2 x 8.2, Pump Motor: 50 HP, Pump Pressure: 94,000 PSI, Power Reqs: 460-4803/60, Max Speed: 500 IPM, Flowmaster PC Controller & FlowPRO ...more
Flow #Mach-4-3070C, CNC waterjet cutter, 10' x22' table, 100 HP, 87000 psi, Amcot chiller, 2013
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-4-3070C
Year: 2013
Flow Mach 4 3070c CNC Waterjet Cutting System - New 2013, Flow Mach 4 3070c CNC Waterjet Cutting System, New: 2013, Table Width: 10', Table Length: 22', Pump Motor: 100 HP, Pump Pressure: 87,000 PSI, Dynamic Cutting Head, PC-Based Roll Around Control, FlowMaster Software, Abrasive Hopper, Amcot Chiller ...more
