2301 - 2350 of 2599 listings
Okuma #MU-500VA, 5-Axis CNC vertical machining center, OSP P200M-H Control, 15000 RPM, 32 automatic tool changer, from Aerospace plant, 2007
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: MU-500VA
Year: 2007
OKUMA MU-500VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE PLANT, 500MM TABLE PLATEN, 15,000 RPM, 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL NEW 2007, Okuma MU500VA CNC Vertical Machining Centre (2007), OSP P200M-H Control, Travels, X-axis (saddle left/right) 1250mm, Y-axis (pallet front/back) 660mm ...more
Okuma #MX-45VAE, CNC vertical machining center, OSP7000M Control, 30" X, 18" Y, 17" Z, 7000 RPM, 20 automatic tool changer, CT-40
Equipment Hub | Decatur, GA
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Okuma
Model: MX-45VAE
Stock #: 121250022, Location: SC, Brand: Okuma, Model: MX-45VAE, Serial #: 1101 9411, Approx. Shipping Weight: 12,500 lbs, Loading Fee: Rigging Required, Table: 39" x 18", X-Axis Travel: 30", Y-Axis Travel: 18", Z-Axis Travel: 17", Spindle: CT-40, Spindle Speed: 7,000 RPM, Spindle Power: 15 HP ...more
Okuma #MX-45VAE, CNC vertical machining center, 20 automatic tool changer, 30" X, 18.1" Y, 17.7" Z, 7000 RPM, #40, 15 HP, 39.37"x18.11"tbl., OSP7000M, rigid tap, 1997
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: MX-45VAE
Year: 1997
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP7000M Series CNC Control, Y Axis ...more
Okuma #MX-45VAE, CNC vertical machining center, OSP-700M Control, 30" X, 18.1" Y, 17.7" Z, 7000 RPM, 20 automatic tool changer, 1999
Prestige Equipment Corp | Melville, NY
Category: Vertical CNC Machining Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Okuma
Model: MX-45VAE
Year: 1999
X-Axis Travel: 30.00", Y-Axis Travel: 18.11", Z-Axis Travel: 17.72", Table Size: 39.37" x 20.1", Table Load Capacity: 1100 lbs, Table Surface to Floor Level: 29.5", Spindle End to Table Surface: 6.3"-24.02", Spindle Speeds: 50-7000 RPM, Spindle Taper: CAT 40, Spindle Drive Motor (AC Drive): 10 HP / 7.3 HP, Rapid ...more
Okuma #MX-45VBE, CNC vertical machining center, OSP700M Control, 30" X, 18" Y, 17.7" Z, 7000 RPM, 32 automatic tool changer, Cat 50, 1997
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Okuma
Model: MX-45VBE
Year: 1997
1997 OKUMA MX-45VBE, X Axis Travel. 30", Y Axis Travel. 18", Z Axis Travel. 17.7", Spindle Motor. 15 hp, Spindle Speed. 7,000 RPM, ATC Capacity. 32, Spindle Taper. CAT50, Table dimensions. 40" x 20", Okuma OSP700M CNC Control, *All Tool Holders Included, Vices not Included*.
Get email updates for newly added Vertical CNC Machining Centers
Vertical CNC Machining Centers (also known as vertical milling machines) are CNC machines with a vertically oriented spindle, enabling efficient machining of a wide range of parts. Commonly used in industries like aerospace, automotive, and metal fabrication, these centers provide precision and flexibility for milling, drilling, and tapping operations. Vertical CNC machining centers are ideal for both high-volume production and detailed work, supporting high accuracy and ease of setup.
Okuma #MX-55VB, CNC vertical machining center, 20 automatic tool changer, 41.3" X, 22" Y, 17.7" Z, 6000 RPM, #50, 20 HP, 51.18"x22.05"tbl., OSP-U10M, rigid tap, 1997
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: MX-55VB
Year: 1997
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP-U10M Series CNC Control, RS-232 Port ...more
Okuma #Millac-800VH, CNC universal machining center, 80 automatic tool changer, 40.1" X, 40.1" Y, 40.1" Z, 10000 RPM, #50, 30 HP, OSP-P200M, Renishaw probe, tool presetter, 1000 psi thru spindle coolant, 2007
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: MILLAC-800VH
Year: 2007
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP-P200M CNC Control, 38,280 Hours ...more
Okuma #Millac-852V, large CNC 3-Axis vertical machining center, 80.7" X, 33.4" Y, 29.5" Z, 6000 RPM, 36 automatic tool changer, #50 taper, 2008
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: MILLAC-852V
Year: 2008
OKUMA MILLAC 852V LARGE CNC 3-AXIS 50 TAPER VERTICAL MACHINING CENTER, 86" X 35" TABLE SIZE, 81" X, 33.5" Y, 29.5" Z, 6000RPM 50 TAPER, 36 ATC, OKUMA OSP P200M CNC CONTROL, Year:, 2008, X axis travel:, 80.71", Y axis travel:, 33.46", Z axis travel:, 29.53", Spindle motor:, 30 HP, Spindle speed:, 6,000 RPM, Spindle ...more
Okuma #Millac-852VII, CNC vertical machining center, 36 automatic tool changer, 80" X, 33.4" Y, 29.5" Z, 6000 RPM, #50, 25 HP, 33.4" x86.6" tbl., Renishaw RMP60, 2016
PM Machines | Santa Ana, CA
Category: Vertical CNC Machining Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Okuma
Model: MILLAC-852VII
Year: 2016
2016 OKUMA MILLAC 852VII, X. 80", Y. 33.4", Z. 29.5", Power. 25 hp, RPM. 6,000 RPM, # ATC. 36, Taper. CT 50 V-Flange With BIGPLUS, Table-W. 33.4", Table-L. 86.6", # Axis. 3, Control. CNC (OSP-P300M), Dimensions. 18' L x 12'10" W x 12' H, Weight. without removing any guarding or sheetmetal, Tool Breakage ...more
Okuma #Millac-852VII, CNC, 80" X, 33.4" Y, 29.5" Z, 33.4"x86.6"table, 25 HP, 6000 RPM, 2016
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MILLAC-852VII
Year: 2016
OKUMA MILLAC 852VII CNC Mill:X 80″Y 33.4″Z 29.5″POWER 25 hpRPM 6,000 RPM# ATC 36TAPER CT 50 V-Flange With BIGPLUSTABLE-W 33.4″TABLE-L 86.6″# AXIS 3DIMENSIONS 11’6″ x 16’6″ x 117″ to the ground, not on blocks or pads:Tool Breakage DetectionTool Wear ...more
Okuma #Millac-853PF-5X, 30 automatic tool changer, 120.8" X, 33.4" Y, 27.5" Z, 12000 RPM, #50, 75 HP, 126" x33.5"tbl., Fanuc 31i, chip conveyor, 2008
Protech Machine Tool Sales | Anaheim, CA
Category: Vertical CNC Machining Centers
Seller: Protech Machine Tool Sales
Location: Anaheim, CA
Mfr: Okuma
Model: MILLAC-853PF-5X
Year: 2008
Travel X/Y/Z/A/B: 120.8"/33.46"/27.56"/+ 35 Degree/+35 DegreeSpindle Motor: 75 HPSpindle Speed: 12,000 RPMSpindle Taper: 50Tool Changer Capacity: 30Table Size: 126"x33.5"Table Load Capacity: 6,600 lbs: Fanuc 31i CNC ControlChip Conveyor5 Axis Swivel Head.
Okuma #Millac-1052V, OSP-P200M, 80.7" X, 41.7" Y, 31.5" Z, 6000 RPM, coolant thru spindle, 36 automatic tool changer, Cat 50, 1000 PSI, S/N 11389, 2008
Machinery Solutions Inc | Lexington, SC
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Okuma
Model: MILLAC-1052V
Year: 2008
Capacity: X axis travel: 80.71" Y axis travel: 41.73" Z axis travel: 31.5" Spindle center to column slide way: 43.31� Table size: 86.61" x 41.34" Allowable table load: 6,600 lbs. Spindle: Spindle taper: CAT 50V flange Maximum spindle speed: 6,000 RPM A.C. spindle motor (cont. / 30 min.): 30 HP Spindle nose to table ...more
Okuma #Millac-1052VAE, OSP-P200M, 40" x120", #50,6000 RPM, thru spindle coolant, 4th axis interface, 3400 cut hours, S/N 14380,2008, excellent
Machinery Solutions Inc | Lexington, SC
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Okuma
Model: MILLAC-1052VAE
Year: 2008
Okuma #Multus-M300
MBI Worldwide LLC | Vernon Rockville, CT
Category: Vertical CNC Machining Centers
Seller: MBI Worldwide LLC
Location: Vernon Rockville, CT
Mfr: Okuma
Model: MULTUS-M300
Okuma #VH-40, CNC vertical machining center, 5-Axis, 2000
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: VH-40
Year: 2000
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP-U100M-H Series CNC Control ...more
Okuma-Howa #40V, CNC vertical machining center, 20 automatic tool changer, 23" X, 16" Y, 18" Z, 8000 RPM,Cat 40,Fanuc OM, 1996
Scott Machinery & Supply Inc | Helena, AL
Category: Vertical CNC Machining Centers
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Okuma-Howa
Model: 40V
Year: 1996
Model: Millac 40V, S/N: 03996, Year: 1996, X-Axis Travel 23", Y-Axis Travel16", Z-Axis Travel18", Spindle Speed8,000 RPM, Spindle TaperCAT 40, Spindle Motor15 HP, Rapid Traverse X,Y,Z945 IPM, ATC20, Fanuc 0M Control, Box Ways, RS-232, Freight charges are not included in sale price. Freight scheduling and costs are ...more
Okuma-Howa #438V, CNC vertical machining center, 20 automatic tool changer, 32" X, 17" Y, 17.7" Z, 10000 RPM,Fanuc 18M, 1992
Scott Machinery & Supply Inc | Helena, AL
Category: Vertical CNC Machining Centers
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Okuma-Howa
Model: 438V
Year: 1992
Model: Millac 438V, S/N: 4003, Year: 1992, Travels XYZ.32"x17"x17.750", Motor:.24hp, RPM:.10,000 RPM, ATC:.20, Table:.16"x40", Taper:.CT-40, Control:.FANUC 18M, Thru spindle coolant, State or Province:GA, Country:United States, Machine Condition:Used, Short :Okuma & Howa Millac 438V, 24HP, Category:Machining ...more
Okuma-Howa #852V, CNC vertical machining center, 2000
Star Equipment Co., Inc. | Utica, MI
Category: Vertical CNC Machining Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Okuma-Howa
Model: 852V
Year: 2000
Okuma-Howa #Millac-4VA, CNC vertical machining center, 3-Axis, Fanuc 11M, 6000 RPM, 24 automatic tool changer
Digital Shovel Holdings Inc | Scarborough, ON
Category: Vertical CNC Machining Centers
Seller: Digital Shovel Holdings Inc
Location: Toronto, ON
Mfr: Okuma-Howa
Model: MILLAC-4VA
Okuma & Howa Millac 4VA CNC Vertical Machining Center with Fanuc 11M CNC Control, Working Condition - Selling as is - USED : Okuma & Howa 4VA - CNC Vertical Machining Center | 3 AXIS, FANUC, 11M, CNC CONTROL, 24 ATC, CAT 40 SPINDLE, 6,000 RPM SPINDLE, 2 SPEED GEARBOX, 4TH AXIS CAPABLE, 220/3/60, 35 AMPS, SR ...more
Okuma-Howa #Millac-40V, CNC vertical machining center, 20 automatic tool changer, 23" X, 16" Y, 18" Z, 8000 RPM,CAT40,Fanuc OM
G-2000 | Toledo, OH
Category: Vertical CNC Machining Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Okuma-Howa
Model: MILLAC-40V
, Okuma & Howa Millac 40V CNC Vertical Machining Center, Year of Mfg:, CNC Control: Fanuc OM, Travels:, X-Axis: 23", Y-Axis: 16", Z-Axis: 18", Spindle Speed: Up to 8,000 RPM, Spindle Taper: CAT 40, Spindle Motor: 15 HP, Rapid Traverse (X,Y,Z): 945 IPM, Tools: 20 ATC, Fanuc 0M Control, Box Ways, Machine ...more
Okuma-Howa #Millac-65V, vertical machining center, 30 automatic tool changer, 78" X, 25" Y, 22" Z, 3600 RPM,CAT50,Fanuc 15M
HTR Global Inc. | Houston, TX
Category: Vertical CNC Machining Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Okuma-Howa
Model: MILLAC-65V
OKUMA & HOWA MILLAC 65V VERTICAL MACHINING CENTER :, Model Millac 65V, CNC control Fanuc 15M, Serial number 66742, Table dimensions 94" x 29", Max. table load 4,400 lbs., Travels, X x Y x Z 78" x 25" x 22", Cutting feed rate 0.039196.86 ipm, Spindle taper CAT 50, Tool stations 30 stations, Tool change time 5 ...more
Okuma-Howa #Millac-65V, CNC vertical machining center, 1998
Star Equipment Co., Inc. | Utica, MI
Category: Vertical CNC Machining Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Okuma-Howa
Model: MILLAC-65V
Year: 1998
Onsrud #122E24CW6, CNC vertical machining center, 61" X, 122" Y, 11" Z, HSD 24 HP Liquid-Cooled spindle, 12-station automatic tool changer, Renishaw Probe, 2022
Equipment Hub | Decatur, GA
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Onsrud
Model: 122E24CW6
Year: 2022
Stock #: 151250016, Location: North Carolina, Brand: C.R. Onsrud, Model: 122E24CW6, Year: 2022, Skidding Fee: Not Available, Loading Fee: Rigging Required, X Axis Travel: 61", Y Axis Travel: 122", Z Axis Travel: 11", Spindle: HSD 24 HP Liquid Cooled, Fanuc Control, 12 Station Auto Tool Change, Renishaw ...more
Onsrud #5-Axis-HM-Series, 5-axis CNC Milling Center, 72" x 144" table, 146" X, 244" Y, 41" Z, 15 HP, 24000 RPM, 24 side mount tool changer
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical CNC Machining Centers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: 5-AXIS-HM-SERIES
Have you been looking for a machine that has the rigidity and accuracy of a CNC Mill, but the large work envelope of a high speed CNC router? Let us introduce the newly re-designed 5-Axis Hybrid Mill. This fully enclosed, 5-axis machining center consistently delivers finished parts meeting the stringent requirements ...more
Onsrud #98E18, CNC vertical machining center, Fanuc Control, 61" X, 98" Y, 11" Z, 24000 RPM, 12 automatic tool changer, Renishaw probe, 2022
Equipment Hub | Decatur, GA
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Onsrud
Model: 98E18
Year: 2022
Stock #: 151260001, Location: North Carolina, Brand: C.R. Onsrud, Model: 98E18, Year: 2022, Skidding Fee: Not Available, Loading Fee: Rigging Required, Spindle: 18 HP HSD Air Cooled, Max Spindle RPM: 24,000, X Axis Travel: 61", Y Axis Travel: 98", Z Axis Travel: 11", Fanuc Control, 12 Position Auto Tool ...more
Onsrud #F98HM, 5-axis CNC Milling Center, 60" x 96" table, 122" X, 196" Y, 41" Z, 15 HP, 24000 RPM, 24 side mount tool changer
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical CNC Machining Centers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: F-98HM
Have you been looking for a machine that has the rigidity and accuracy of a CNC Mill, but the large work envelope of a high speed CNC router? Let us introduce the newly re-designed 5-Axis Hybrid Mill. This fully enclosed, 5-axis machining center consistently delivers finished parts meeting the stringent requirements ...more
Onsrud #F148HM, 5-axis CNC Milling Center, 72" x 144" table, 146" X, 244" Y, 41" Z, 15 HP, 24000 RPM, 24 side mount tool changer
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical CNC Machining Centers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: F148HM
Have you been looking for a machine that has the rigidity and accuracy of a CNC Mill, but the large work envelope of a high speed CNC router? Let us introduce the newly re-designed 5-Axis Hybrid Mill. This fully enclosed, 5-axis machining center consistently delivers finished parts meeting the stringent requirements ...more
Onsrud #F98HM75, 5 Axis Hybrid Machining Center, 60" X, 48" Y, 41" Z, 75 HP, 24000 RPM, 24 tool, Probe, Tooling, Fanuc 31i-B5, rigid tap, Chip Conv., 2023
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Onsrud
Model: F98HM75
Year: 2023
Make: C.R. Onsrud, Model: F98HM75, Year: 2023, Machine Location: Upon Request, X Table Size: X 60″, X Table Size: Y 48″, U Table Size: X 60″, U Table Size: Y 48″, Z Stroke: 41″, Spindle Taper: HSK-A63, Spindle Motor: 75 HP, Spindle Speed: 24,000 RPM, Tool Changer: 24 Stations, Machine ...more
Parpas #Diamond, CNC vertical machining center, Heidenhain iTNC 530 Control, 95" X, 67.7" Y, 39" Z, 20000 RPM, 24 automatic tool changer, HSK63 taper, 2011
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Parpas
Model: DIAMOND
Year: 2011
2011 PARPAS DIAMOND, X Axis. 95", Y Axis. 67.7", Z Axis. 39", Power. 38.9 hp, RPM. 20,000 RPM, # ATC. 24, Taper. HSK63, Table-W. 63", Table-L. 90", Max. Table Load. 48,400 lb, Heidenhain iTNC 530 CNC Control, Chip Conveyor.
Parpas #Diamond, CNC vertical machining center, Heidenhain iTNC 530 Control, 95" X, 67.7" Y, 39" Z, 20000 RPM, 24 automatic tool changer, HSK63 taper, 2012
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Parpas
Model: DIAMOND
Year: 2012
2012 PARPAS DIAMOND, X Axis. 95", Y Axis. 67.7", Z Axis. 39", A-Axis. +/- 105, C-Axis Rotation. +/- 370, Power. 38.9 hp, RPM. 20,000 RPM, # ATC. 24, Taper. HSK63, Table-W. 63", Table-L. 90", Max. Table Load. 48,400 lb, Heidenhain iTNC 530 CNC Control, High Pressure Coolant System, Chip Conveyor.
Parpas #Estema-2100, 5-Axis CNC vertical machining center, 82" X, 43" Y, 27" Z, 32000 RPM,Heidenhain 530 Plus,chip conveyor, 2004
G-2000 | Toledo, OH
Category: Vertical CNC Machining Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Parpas
Model: ESTEMA-2100
Year: 2004
SERIAL.: 2100-P103, MODEL.: ESTERMA 2100, YEAR.: 2004, TABLE SIZE.: 114" X 47", TRAVELS:, X.: 82", Y.: 43", Z.: 27", B+/B-.: 110 DEGREE, B AXIS ROTARY TILT TABLE.: 32", SPINDLE TAPER.: HSK 50E, SPINDLE SPEED.: 32,000, MOTOR HP.: 40, HEIDENHAIN 530 PLUS, CHIP CONVEYOR, SPARE PARTS:, NEW HYDRAULIC UNIT IN BOX. $25K ...more
Pinnacle #BX-300A, CNC vertical machining center, 30 automatic tool changer, 44.8" X, 24" Y, 24" Z, 15000 RPM, 5-Axis, new 2024
Myers Technology Co LLC | Elk Grove Village, IL
Category: Vertical CNC Machining Centers
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Pinnacle
Model: BX-300A
Year: 2026
Pinnacle BX-300A 4+1-Axis Vertical Machining Center w/ Rotary Table, Pinnacle BX-300A Vertical Machining Center with 320mm(12.59") Rotary Table, and 5-Axis ( 4+1) Machining, Table Size 51.18" x 24.01", Travel Range (X) 44.88", Travel Range ( Y) 24.01", Travel Range (Z) 24.01", Max Table Load 1,874 Lbs., Spindle Nose ...more
Pinnacle #BX-900A, CNC vertical machining center, 30 automatic tool changer, 59" X, 35.4" Y, 45.2" Z, 15000 RPM,Fanuc 0i-MF,new 2019
Myers Technology Co LLC | Elk Grove Village, IL
Category: Vertical CNC Machining Centers
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Pinnacle
Model: BX-900A
Year: 2019
Pinnacle BX-900A Fanuc 4+1 Axis Vertical Machining Center w/ built in Rotary Table, BX900A is high speed, high accuracy with, 5-axis simultaneously controlled machining center. Equips 15000rpm built-in spindle, B-axis swivel head 120, and C-axis 630mm rotary table (Built-in DD C-axis) to optimize machining space and ...more
Pinnacle #LV85, CNC Vertical Machining Center, 33" X, 22" Y, 22" Z, 21 HP, 8000 RPM, ISO 40, Mitsubishi M70V control, tailstock, 2015
Trader Machinery Inc | Concord, ON
Category: Vertical CNC Machining Centers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Pinnacle
Model: LV85
Year: 2015
201739" X 20"33"22"22"1,322 LBS.3.9" TO 25.9"20ISO 408,000 RPM1,417"/MIN. X/Y - 944"/MIN. Z393"/MIN.600V/3/6021 HP.
Pinnacle #QV-137, CNC vertical machining center, 24 automatic tool changer, 51.2" X, 27.9" Y, 24" Z, 6000 RPM,Fanuc Control,new 2024
Myers Technology Co LLC | Elk Grove Village, IL
Category: Vertical CNC Machining Centers
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Pinnacle
Model: QV-137
Year: 2025
Pinnacle QV-137 Fanuc Control Vertical Machining Center, 4 Box ways in "Y", Heavy duty, Geared head.Like= Makino, Toyoda, Mazak, Mori, DMG, OKK, Okuma, Enshu, Doosan, #50 Taper Geared Head, Coolant thru spindle, Oil skimmer, 15" LCD, Fanuc MPG and Smart APP, Table Size 59" X 27.55, Table Load 3,300 lbs., X Axis Travel ...more
Porta Solutions #MultiCenter-3-Spindle, CNC vertical machining center, 5-Axis, Fanuc I, 2020
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Porta
Model: MULTICENTER-3-SPINDLE
Year: 2020
Full 5-Axis Capability| 3 spindle for simultaneous production| Low Hours, Used 2020 Porta Multicenter 3S 5-axis machining center featuring Fanuc Panel i control. Delivers high precision, flexibility, and efficiency for complex multi-axis machining applications., Number of Tables: 4, Max. Rotation Diameter: 18.9 ...more
Promac #Zephyr-VTR-1.5-5A, 5-Axis CNC vertical machining center, 71.6" X, 39.4" Y, 39.4" Z, 15000 RPM, 32 automatic tool changer, 2006
iGAM | Detroit, MI
Category: Vertical CNC Machining Centers
Seller: iGAM
Location: Detroit, MI
Mfr: Promac
Model: ZEPHYR-VTR-1.5-5A
Year: 2006
The 2006 Promac Zephyr VTR1.2 5-Axis Vertical Machining Center is a versatile, high-precision used CNC machine designed for complex part geometries and advanced contouring operations. a high-speed 15,000 RPM spindle and HSK-63 tool interface, this model excels in high-speed machining applications across aerospace ...more
Promac #Zephyr-VTT-30, 137" X, 106" Y, 106" Z, 20000 RPM, HSK 100, 40 HP, Heidenhain iTNC 530, 2009
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Promac
Model: ZEPHYR-VTT-30
Year: 2009
Used Promac Zephyr VTT 30. This pre-owned Bridge Type Mill is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Promac Bridge Type Mill we can review machine. To request a quote, inquire about rigging and trucking or to schedule an ...more
Quasar #MK-603, vertical machining center, 48 automatic tool changer, 40.1" X, 24" Y, 23.6" Z, 12000 RPM, #40, 30 HP, 3-Axis, Fanuc 0I-MD, 2012
Machinery Values Inc | Harrison, NJ
Category: Vertical CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Quasar
Model: MK-603
Year: 2012
QUASAR VERTICAL MACHINING CENTERMODEL: MK 603, S/N: 201U120544, NEW: 2012 TYPE OF CNC CONTROL FANUC 0I-MD# AXIS″TABLE SIZE. 41.3" X 21.6" (2 PALLETS)TABLE CAPACITY. 660 POUNDSX-AXIS TRAVEL. 40.1 INCHESY-AXIS TRAVEL. 24 INCHESZ-AXIS TRAVEL. 23.6 INCHESSPINDLE SPEED. 12,000SPINDLE TAPER. CAT 40 BIG ...more
Quaser #MF500U/15C, 5-Axis Vertical Machining Center, 120 automatic tool changer, 21.6" X, 24.8" Y, 24" Z, 16.14" table diameter, 19.7" Swing, 15000 RPM, FANUC 31i-B5, 2018
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Quaser
Model: MF500U/15C
Year: 2018
Make: Quaser, Model: MF500U/15C, Year: 2018, Machine Location: Upon Request, Table Diameter: 16.14″, Max Swing: 19.7″, X-Axis Travel: 21.65″, Y-Axis Travel: 24.8″, Z-Axis Travel: 24.0″, A-Axis Travel: +30° ~ -120°, C-Axis Travel: 360° Continuous, Table Load Capacity: 441 lbs ...more
JUST ADDED!
Quaser #MV184-C/12C, CNC vertical machining center, 30 side mount tool changer, 40.1" X, 24" Y, 24" Z, 12000 RPM, #40, 20 HP, Fanuc Oi-MF, rigid tap, thru spindle coolant, 2016
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Quaser
Model: MV184-C/12C
Year: 2016
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc Oi-MF Series CNC Control, Linear Ways ...more
Quaser #MV204E/12B, CNC vertical machining center, 60 automatic tool changer, 50" X, 27.5" Y, 24" Z, #40, 2019
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Quaser
Model: MV204E/12B
Year: 2019
Used Quaser MV204E/12B. This pre-owned Vertical Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Quaser Vertical Machining Center we can review machine. To request a quote, inquire about rigging and trucking or to ...more
Quaser #MV204E/12B, vertical machining center, 60 automatic tool changer, 50" X, 27.5" Y, 24" Z, #40, Fanuc 0iMF, Renishaw OMP-40 probe, 2019
Machine Tool Bids | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Quaser
Model: MV204E/12B
Year: 2019
Used Quaser MV204E/12B. This pre-owned Vertical Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Quaser Vertical Machining Center we can review machine. To request a quote, inquire about rigging and trucking or to ...more
Republic-Lagun #VGC-5028, 5" Axis CNC Vertical Grinding & Machining Center, 59" x 26" table, 32 automatic tool changer, Cat 50 Spindles, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Republic-Lagun
Model: VGC-5028
Year: 2015
Republic-Lagun VGC5028 5-Axis CNC Vertical Grinding & Machining Center, (subject to buyer verification):, Table Size 59” x 26”, ATC 32 Station Side Mount, Spindle Taper CAT50, (subject to buyer verification):, Fanuc 31i Model B5 CNC Control, Rotary Indexer Fixture, Chip Auger, Coolant System, Cat 50 ...more
Republic-Lagun #VGC-5028, 5" Axis CNC Vertical Grinding & Machining Center, 59" x 26" table, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Republic-Lagun
Model: VGC-5028
Year: 2015
Republic-Lagun VGC5028 5-Axis CNC Vertical Grinding & Machining Center, (subject to buyer verification):, Table Size 59” x 26”, ATC 32 Station Side Mount, Spindle Taper CAT50, (subject to buyer verification):, Fanuc 31i Model B5 CNC Control, Rotary Indexer Fixture, Chip Auger, Coolant System, Cat 50 ...more
HH Roberts #TW-30-MCO, CNC Machining Center, 30" X, 20" Y, 22.2" Z, 42" x 13" Table, 38" width Saddle, 10-15 HP, 80-6000 RPM, 20-Tool automatic tool changer
Norman Machine Tool Ltd | Baltimore, MD
Category: Vertical CNC Machining Centers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Roberts
Model: TW-30-MCO
HH Roberts 30″ x 20″ CNC Machining Center, TW-30-MCO, Inventory # 9639, Model: TW-30-MCO, S/N: 0061798648, Table Surface: 42″ x 13″, Travels:, X-Axis: 30″, Y-Axis: 20″, Z-Axis: 22.2″, Table Height Above Floor: 41″, Spindle to Column: 20 1/4″, Spindle Nose to Table: ...more
Roders #RFM-600, precision high speed vertical machining center, TEC RMS 6 Windows based CNC Control, 24" X, 20" Y, 12" Z, 42000 RPM, 18 automatic tool changer, HSK E40
Adams Machinery | Libertyville, IL
Category: Vertical CNC Machining Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Roders
Model: RFM-600
T-Slot Table Size 28" x 20" X Axis Travel 24" Y-Axis Travel 20" Z-Axis Travel 12" Max Spindle Speed 42000 RPM Spindle Taper HSK E40 Automatic Tool Changer 18 Tool Approximate Weight 11400 lbs, Roders TEC RMS 6 Windows Based CNC Control. Fischer 42000 RPM Spindle. 18 Position ATC. Blum Laser Tool Setter. Lahntechnik ...more
Roders Tec #RFM600, CNC vertical machining center, 18 automatic tool changer, 24" X, 20" Y, 12" Z, 42000 RPM, Roders RMS 6 CNC Control, 1997
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Roders
Model: RFM600
Year: 1997
Make: Retro Systems, Model: Aqua Hornet 6'x12', Year: 2011, Machine Location: Upon Request, Table Size: 6′ x 12′, KMT Streamline SL Pro 60:, Motor Rating: 60 HP, Max Operating Pressure: 90,000 PSI, Max Flow Rate: 0.73 gpm, Retro Systems Control, KMT Streamline SL Pro 60 Waterjet Intensifier, Ebbco ...more
Roders #RFM600/2, CNC vertical machining center, 18 automatic tool changer, 23.6" X, 17.7" Y, 11.8" Z, 42000 RPM, HSK-E40,2004
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Roders
Model: RFM600/2
Year: 2004
VERTICAL MACHINING CENTERS RFM 600/2 SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 2004 RODERS RFM 600/2 High Speed Vertical Machining Center: Machine was made in Soltau, Germany -DESIGN CONCEPT- In the Roeders line of machines, accuracy, extreme dynamics and ...more
Roders #RFM600/2, vertical machining center, 18 automatic tool changer, 23.6" X, 17.7" Y, 11.8" Z, 42000 RPM, HSK E40, 27.5"x21.6"tbl., 2007
Holland Equipment Hunters Inc | Hamilton, MI
Category: Vertical CNC Machining Centers
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Roders
Model: RFM600/2
Year: 2007
Type:Machining Centers, CNC, Vertical, MillManufacturer:RODERSModel:RFM 600Year:2007Stock #:802783Status:For SaleSerial #:12654-402.
