1 - 50 of 51 listings
JUST ADDED!
Kennametal #212905R01, CAT 45 tool holder, 9.25" OAL, 6" GA, 2.63" BD, 1.25" AD
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: 212905R01
This is a Kennametal CAT 45 tool holder, model 212905R01, with an overall length (OAL) of 9.25 inches. Key dimensions include a gauge length of 6 inches, a body diameter of 2.63 inches, and an arbor diameter of 1.25 inches. This item is designed for machining tasks that demand precision and reliability.
JUST ADDED!
Kennametal #3365-9013, hex drive holder, straight shank, 3/4" shank diameter, 1-1/4" outside dimension, 5-1/2" OAL
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: 3365-9013
This Kennametal hex drive holder str shank, part number 3365-9013, s an Outside Diameter (OD) of 1-1/4" and an Overall Length (OAL) of 5-1/2”. The shank has a diameter of 3/4” and a length of 2-7/8”. The body length measures 2-5/8”. This item is identified as a hex drive holder tooling ...more
JUST ADDED!
Kennametal #336919R03 / Command #4521CD5, CAT 40 face mill holder
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: 336919R03
This Kennametal 336919R03 face mill, featuring part number 336919R03 / 4521CD5, is designed with a CAT 40 holder. The overall length (OAL) is 5.25 inches, with a projection of 2.5 inches. The mill diameter at the insert end measures 1.25 inches. The tool s 3 insert seats and has a body diameter of 1.50 inches.
JUST ADDED!
Kennametal #CB1074355, CAT 40 tool holder, tapered shank, 7.750" OAL, 5" projection
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CB1074355
This is a Kennametal tool holder, model CB1074355. It is designed with a CAT40 taper size and a tapered shank. The overall length of the holder is 7.750 inches, with a projection of 5 inches. It s a body diameter of 3.34 inches and a bore diameter of 2.125 inches.
Kennametal #CBH0001D 130720G5HO00, CAT 40 ANSI tool holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: CBH0001D
, Kennametal CAT40-ANSI tool holder, model CBH0001D. Condition: used. s: 7.25" OAL, 2" bore diameter, 2.60" body diameter, 4-3/8" projection. Ideal for tooling needs., Spec Sheet:, KENNAMETAL CAT40-ANSI - CBH0001D 130720/G5HO00 - TOOL HOLDER, USED, Brand: Kennametal, Part Number: CBH0001D, Holder Type: Cat 40, OAL: ...more
Get email updates for newly added Tool Holders
Tool Holders (also known as toolholding devices or machine tool holders) are components used to securely attach cutting tools to the spindle of machining equipment, such as CNC machines or lathes. Commonly used in industries like metalworking, manufacturing, and aerospace, tool holders ensure stability, precision, and proper alignment during machining operations. They are essential for achieving accurate cuts, consistent performance, and high-quality results in various applications.
JUST ADDED!
Kennametal #CBH0001D, CAT 40 ANSI tool holder, 7.25" OAL, 2.0" bore
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CBH0001D
This is a Kennametal tool holder, model CBH0001D, featuring a CAT 40 holder type. The Overall Length (OAL) measures 7.25 inches. Key dimensions include a 2.0-inch bore diameter and a 2.60-inch body diameter. The projection is 4-3/8 inches.
Kennametal #CV40BTT25M600, tool holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: CV40BTT25M600
, Kennametal CV40BTT25M600 tool holder for sale. s CAT 40 holder type, 8.75" OAL, 2.08" body diameter, and 1.00" bore diameter. Suitable for various tooling applications. Sold individually. Condition: used. Explore your machinist needs today., Spec Sheet:, KENNAMETAL CV40BTT25M600 - TOOL HOLDER, PRICED FOR EACH! ...more
JUST ADDED!
Kennametal #CV40BTT25M600, CAT 40 tool holder, 8.75" OAL (2 available)
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CV40BTT25M600
The Kennametal model 6323-1452CHGA is an indexable boring head designed for precision tooling tasks. Technical s include a 1/4” screw head, accommodation for an Allen wrench, a 1.5” diameter bore end, an overall diameter of 2.5”, and an overall length of 2”.
JUST ADDED!
Kennametal #CV40EM038250, CAT 40 end mill holder, LOT of 2, 3/8" (.3750" ), coolant thru
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CV40EM038250
The Kennametal model CV40EM038250 is a CAT 40 end mill holder with a size of.3750, equivalent to 3/8 fractional size. It s a gage length of 2.5000 inches and a maximum tool depth of 4.0100 inches. The body diameter measures 1.0000 inches. This holder is designed with coolant thru capability and can withstand a maximum ...more
JUST ADDED!
Kennametal #CV40EM050262, CAT 40 end mill holder
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CV40EM050262
The Kennametal model CV40EM050262 is a CAT 40 end mill holder. It s a CV40 system size on the machine side. The overall length is 134.798 mm (5.30 in). The adapter/shank/bore diameter is 44.450 mm (1.7500 in), and the diameter on the workpiece side is 12.700 mm (0.5000 in). The body diameter on the workpiece side is ...more
Kennametal #CV40KM4040, Cat 40 Modular Tool Holder, (2 available)
Jack Wilkerson Industrial Surplus | Gonzales, LA
Category: Tool Holders
Seller: Jack Wilkerson Industrial Surplus
Location: Gonzales, LA
Mfr: Kennametal
Model: CV40KM4040
For sale is one (1) used Kennametal Cat40 Modular Tool Holder. Part number: CV40KM4040.
Kennametal #CV40TA1137, tap chuck adapter, whistle notch style, Short TA
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: CV40TA1137
, Kennametal Tap Chuck Adapter, Whistle Notch Style, Short TA model CV40TA1137, designed for milling applications. New condition with in compliance with ISO standards. Ideal for maximizing tooling efficiency., Spec Sheet:, SWN IN-CV Form AD Tap Chuck Adapter Whistle Notch Style Short TA, Cat 40, SAP Material # ...more
JUST ADDED!
Kennametal #CV40TA1137, CAT 40 tap chuck adapter, whistle notch style, short TA
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: CV40TA1137
This is a Kennametal tap chuck adapter, model CV40TA1137, featuring the Whistle Notch™ style and a short TA model design. It is designated as a SWN IN-CV form AD tap chuck adapter with a CAT 40 taper. The item is identified by the ISO catalog # CV40TA1137 and is designed for milling applications.
Kennametal #CV40TG100300, tool holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: CV40TG100300
, KENNAMETAL CV40TG100300 Tool Holder, used, fits CAT 40 spindle. 2.750" projection length. Ideal for enhancing your tooling setup with reliable performance. Compact and efficient, perfect for various machining applications., Spec Sheet:, KENNAMETAL CV40TG100300 - TOOL HOLDER, USED, Brand: KENNAMETAL, Part Number: ...more
JUST ADDED!
Kennametal #CV50SM150240, CAT 50 Shell Mill Holder, 1-1/2" Arbor, 2.4" Gage Length, AT3
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Imlay City, MI
Mfr: Kennametal
Model: CV50SM150240
The Kennametal CV50SM150240 is a CAT 50 taper shank face mill holder designed for shell mill applications. It s a CV50 V-flange shank constructed to meet ANSI B and ISO AT3 standards, ensuring compatibility with standard CAT 50 spindles. The arbor size, or pilot diameter, is 1-1/2 inches, and the tool provides a gage ...more
Kennametal #CV50SM150240 Cat 50 facemill holder, 1-1/2" dia.arbor, #104457
R.A.B. Industries Inc | Washington, MI
Category: Tool Holders
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Kennametal
Model: CV50SM150240
USED-KENNAMETAL CV50SM150240 CAT 50 FACEMILL HOLDER (ARBOR SIZE 1-1/2" DIAMETER).
Kennametal / Erikson #CV50SM200240, CAT 50 shell mill holder, w/ 2" pilot & Mitsubishi Indexable Face Mill
Dominion Air & Machinery Co | Roanoke, VA
Category: Tool Holders
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Kennametal
Model: CV50SM200240
Kennametal #CV50TG150300, tool holder, CAT 50 shank, 23/64" min., 1-1/2" max., 3" projection
Dominion Air & Machinery Co | Roanoke, VA
Category: Tool Holders
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Kennametal
Model: CV50TG150300
JUST ADDED!
Kennametal #DCLNL-204D, left hand clamp holder, LOT of 2, 1-1/4" shank, 6.00" OAL, negative rake
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: DCLNL-204D
The Kennametal DCLNL-204D is a turning toolholder with a left-hand orientation. It utilizes a clamp method for insert holding and is compatible with CN.43. inserts. The toolholder s a shank width of 1-1/4 inches and a shank height of 1-1/4 inches. It has an overall length of 6.0000 inches and operates with a negative ...more
JUST ADDED!
Kennametal #DCLNL-205D, tool holder, 1.25" shank, 6" long, for CN..543 insert
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: DCLNL-205D
The Kennametal model DCLNL-205D is a toolholder with NSI catalog ID DCLNL-205. It s a shank height of 1.25 inches and a shank width of 1.25 inches. The total tool length is 6 inches, and the head length measures 1.38 inches. This toolholder is compatible with CN.543 gage inserts.
Kennametal #DSDNN-246, 1-1/2" x 1-1/2" indexable tool holders (5 available)
T R Wigglesworth Machinery | Bedford, OH
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kennametal
Model: DSDNN-246
*Photos in same order as in, *Photos in same order as in, Kennametal DSDNN-246, Overall length. 7", Shank. 1 1/2" x 1 1/2" x 5 1/2", Cutting width.Neutral, Insert size. 3/16", Weight. 4LBS 8OZ, Dor Lock Toolholder System, Square Insert, Side Cutting Edge Angle, 0 Degree Insert Clearance, Neutral Tool, Kennametal ...more
JUST ADDED!
Kennametal, tool holders, LOT of 6, mixed 3/4" and 5/8" shanks, #DTFNLS-123, #DCFNL-124B, etc.
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: DTFNLS-123
This offering comprises a set of six Kennametal toolholders. The collection includes five toolholders with 3/4" shanks and one toolholder with a 5/8" shank. Specific models present in this set are DTFNLS-123, DCFNL-124B, KTGL-123, 124B, KSBR 124, and NC2 SCGPL-83V. The individual components include ...more
JUST ADDED!
Kennametal #DTFNR-205D, tool holder, 1.25" square shank, 6" OAL, for TN-54 inserts
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: DTFNR-205D
This is a Kennametal DTFNR-205D toolholder, also labeled as DCFNL-205D. It s a 1.25-inch square shank and has an overall length (OAL) of 6 inches. The toolholder requires an insert clamp and is designed for an ins TN-54 insert type. The manufacturer/brand is Kennametal.
JUST ADDED!
Kennametal #DWG2047203R01, KM modular quick change tooling system adapters, LOT of 4
HGR24 | Euclid, OH
Category: Tool Holders
Seller: HGR24
Location: Euclid, OH
Mfr: Kennametal
Model: DWG2047203R01
JUST ADDED!
Kennametal #HSK63AWN20100M, HSK63A whistle notch adapters, LOT of 2
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: HSK63AWN20100M
This Kennametal HSK63AWN20100M whistle notch adapter s an ANSI catalog ID HSK63AWN20100M. The adapter/shank/bore diameter measures 0.787 in. The body diameter 1 workpiece side is 2.028 in. The gage length is 3.937 in. The clamping hole length is 1.65 in, and the adjustment range is 0.394 in. It is an 8 mm clamp screw ...more
Kennametal #HSK63AWN32110M, whistle notch adapter
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: HSK63AWN32110M
, KENNAMETAL HSK63AWN32110M Whistle Notch Adapter, 32 mm shank, 71.5 mm body diameter, gage length 110 mm. Used and in good condition. Ideal for precise tooling tasks, with a clamping length of 54 mm and adjustment range of 9 mm., Spec Sheet:, Kennametal HSK63AWN32110M - Whistle Notch Adapter, USED, Brand: Kennametal ...more
JUST ADDED!
Kennametal #HSK63AWN32110M, HSK63A whistle notch adapter
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: HSK63AWN32110M
The Kennametal HSK63AWN32110M is a whistle notch adapter with a 32 mm adapter, shank, or bore diameter and a 71.5 mm body diameter on the workpiece side. Its gage length is 110 mm, and it s a clamping length of 54 mm with an adjustment range of 9 mm. The adapter uses a 10 mm drive size for the clamp screw ID and a 6 ...more
JUST ADDED!
Kennametal #HSK63CHCT18080M, HSK63C hydraulic end mill holder, 18 mm
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: HSK63CHCT18080M
The Kennametal hydraulic endmill holder, model HSK63CHCT18080M, s a spindle type of HSK63C and is designed for an 18mm shank capacity. It has a projection length of 80mm and includes coolant-through capability. The holder is constructed from steel and has a weight of 4.00 lbs.
JUST ADDED!
Kennametal, tool holders, LOT of 2, .750" #KSBR12 (4.5" OAL) and 1" #NER-163C NI6 (5" OAL)
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: KSBR12
This lot includes two Kennametal tool holders. The first tool holder is a KSBR12 model with a 0.750" shank and an Overall Length (OAL) of 4.5". The shank size is 0.750" square. The second is a NER-163C NI6 tool holder with a 1" square size and an OAL of 5".
JUST ADDED!
Kennametal #MRGNR-206D, Kenloc tool holder, negative rake, 1.25" shank height/width
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: MRGNR-206D
The Kennametal MRGNR-206D toolholder s an ANSI catalog ID of MRGNR206D. Its dimensions include a shank height of 1.25 in and a shank width of 1.25 in. The total tool length is 6 in, with a head length of 1.31 in, and an F dimension of 1.5 in. This toolholder is designed with a negative rake. It is compatible with a ...more
JUST ADDED!
Kennametal #NEL-204D and #NER-204D, tool holders, LOT of 2, 1.25" shank, 6" tool length
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: NEL-204D
The Kennametal tooling set includes a lot of two tools, identified by catalog IDs NEL204D and NER204D. Both tools a shank height of 1.25 inches and a shank width of 1.25 inches. The F dimension for both tools is 1.5 inches, and the overall tool length is 6 inches. The set consists of one left-hand tool (NEL204D) and ...more
JUST ADDED!
Kennametal #NEL-243D, tool holder
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: NEL-243D
The Kennametal NEL-243D tool holder s a catalog ID of NEL243D. Its include a shank height of 1.5 inches, a shank width of 1.5 inches, and an overall tool length of 6 inches.
JUST ADDED!
Kennametal #QC40EM075231, tool holder, NMTB40 taper, w/3/4" end mill
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: QC40EM075231
The Kennametal QC40EM075231 is a tool holder featuring an NMTB40 Taper. Its technical include a projection of 2.23 inches and an overall length (OAL) of 6 inches. The body diameter measures 1.72 inches. This specific tool holder configuration includes a 3/4-inch end mill.
Kennametal #QC50EM050275, NMTB50 end mill holder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: QC50EM050275
Spec Sheet:, Kennametal QC50EM050275 NMTB50 End Mill Holder, USED, Brand: Kennametal, Part Number: QC50EM050275 / C-J-12, Holder Type: NMTB50, End Mill Size: 1/2, OAL: 9 w/ Button 7-3/4 without button.
JUST ADDED!
Kennametal #QC50EM050275, NMTB50 end mill holder, 1/2" size, 9" OAL, 7-3/4" length w/o button
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: QC50EM050275
The Kennametal QC50EM050275 is an NMTB50 end mill holder designed for 1/2 inch end mill sizes. The unit s an overall length of 9 inches with the button and 7-3/4 inches without the button. Key technical identifiers include part numbers QC50EM050275 and C-J-12.
Kennametal #QC50SM200188, cyclone milling tool, 50 taper
T R Wigglesworth Machinery | Bedford, OH
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kennametal
Model: QC50SM200188
Total Length - 9(1/4)inch, Total Diameter - 7inch, Weight - 25LBS, This is a Kennametal Toolholder with a Cyclone Cutting head., Kennametal Holder - (158641CB5), Kennametal screw - (KLS20)(S4CE4), Cyclone cutter - (CNP30M)(0612)(R.H), Wedge# - 81009-1, (RB13), Serial No. 168., Overview, Type:Tooling and ...more
JUST ADDED!
Kennametal #SEF100120RHSK63AM, HSK63A metric drill combination holder
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: SEF100120RHSK63AM
This is a Kennametal HSK63A metric drill combination holder, model SEF100120RHSK63AM. Technical include a cutting diameter of.393701 inches, a body diameter of 1.496063 inches, and a usable length of 3.503937 inches. The holder s 2 cutting edges and 1 connection count on the machine side.
Kennametal #SS100RDL666, Collet Holder, 1" diameter x 4" L Shank, 0.975" I.D. Head, 6.5" overall length
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Model: SS100RDL666
, Discover the KENNAMETAL Collet Holder, model SS100RDL666. Ideal for your tooling needs, it s a 1" diameter shank, 4" shank length, and.975" inside diameter head. This used piece measures approx. 6.5" overall length. Secure it today!, Spec Sheet:, KENNAMETAL Collet Holder SS100RDL666, USED, Part #: SS100RDL666 ...more
JUST ADDED!
Kennametal #SS100TCK719, extension shafts, LOT of 4
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: SS100TCK719
The Kennametal SS100TCK719 extension shaft s a 27 mm lock nut diameter [D11] and an overall length [L] of 182.575 mm. The shank length [LS] measures 138.125 mm. Key dimensions include a slide tension [LTN] of 14.22 mm and a slide compression [LCM] of 4.83 mm. The distance across flats [WF] is 19.05 mm. The ...more
JUST ADDED!
Kennametal, tool holders, LOT of 3, (2) #TRAOL203D and (1) #SRGCR163, various specs
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Model: TRAOL203D
This lot includes three Kennametal tool holders. Two are TRAOL203D models, with a cutting height of 31.75 mm, shank width of 31.75 mm, F dimension of 32.258 mm, tool length of 152.4 mm, cutting depth of 19.05 mm, axial rake angle of 0, and a gage insert of RC.35. The third tool holder is an SRGCR163 model, featuring a ...more
JUST ADDED!
Kennametal, BT40 quick change tool holder, 1-5/8" diameter
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
Stock #: 78912 Category: DC Motors HP: 10 RPM: 1750 Frame: SC2113ATZ Enclosure: DPBB Make: Reliance Arm Volts: 500 Field Volts: 300 Field Amps:.86 Field Winding: Stab Shunt Condition: Electrically O.K. Location: Toledo, OH.
JUST ADDED!
Kennametal and Sumitomo, turning tools and tool holders, LOT of 7
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
This item is a lot of seven turning tools, including six Kennametal toolholders and one Sumitomo tool holder. The Kennametal tools include models DCLNL-246D, NER-205D, DDJNL-205D, NSL-205D, NSR166D, and NSR206D. The Sumitomo tool is model BNGGR160. Specifically, the Kennametal NER-205D NJ0 s a 1.25" square shank.
JUST ADDED!
Kennametal, DCLNR/DCRNR tool holders, LOT of 2, 1.25" and 1.5" shanks
Aucto | San Francisco, CA
Category: Tool Holders
Seller: Aucto
Location: Louisville, KY
Mfr: Kennametal
This lot includes two Kennametal toolholders: a DCLNR-205D and a DCRNR-245D, both utilizing CN-54 inserts. The Kennametal DCLNR-205D s a 1.25-inch shank height and width, a 1.5-inch F dimension, a 6-inch tool length, and a 1.38-inch head length. The Kennametal DCRNR-245D s a 1.5-inch square shank and a 6-inch overall ...more
Dorian Tool - Set of 3 Tool Holders w/ Kennametal Tool
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
Spec Sheet:, Dorian Tool Set of 3 Tool Holders w/ Kennametal Tool, Brand: Dorian Tool, Set of 3, Part Numbers Include:, D35CXA-1, Holder Number: 1 (Turning & Facing), Series: CXA (for 14" to 17" swing lathes), Tool Capacity: 3/4" to 1" square shank, Dimensions: 3.75" Length (C) x 2.5" Height (E) x 1.75" Width (D) ...more
Kennametal, Tool Holder, (2) 152.4 mm L Tool w/31.75 mm width Shank & (1) 152.4 mm L Tool w/25.4 mm width Shank, Lot of 3
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, KENNAMETAL Tool Holder Lot of 3. Includes 2 TRAOL203D with 31.75mm cutting height and 152.4mm length, and 1 SRGCR163 with 25.4mm shank height and 152.4mm length. Used condition. Ideal for tooling and accessories needs., Spec Sheet:, KENNAMETAL TOOL HOLDER Lot of 3, Kennametal TRAOL203D QTY of 2, 112871258K3CV ...more
Kennametal DCLNL-204D Turning Toolholder Set of 2
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, Kennametal DCLNL-204D turning toolholder set of 2, used condition. s left-hand orientation, clamp insert holding, 1-1/4" shank width and height, and 6" overall length. Compatible with CN.43. inserts. Ideal for precise tooling applications., Spec Sheet:, KENNAMETAL DCLNL-204D, Set of 2 USED, Hand of Holder Left Hand ...more
Kennametal DCLNL-205D Toolholder
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, Kennametal DCLNL-205D toolholder available, ideal for machining tasks. s a 1.25 in shank height and width, and 6 in tool length. Designed for precision with NSI ID DCLNL-205 and CN.543 gage insert compatibility. Used condition., Spec Sheet:, Kennametal DCLNL-205D Toolholder, USED, NSI Catalog ID DCLNL-205, Shank ...more
Kennametal HSK 63 C 18mm Hydraulic Endmill Holder HSK63CHCT18080M
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, Kennametal HSK 63 C Hydraulic Endmill Holder, model HSK63CHCT18080M, in used condition. s 18mm shank capacity, 80mm projection length, coolant through capability. Made from steel, weighs 4 lbs. Priced individually., Spec Sheet:, Kennametal HSK 63 C 18mm Hydraulic Endmill Holder HSK63CHCT18080M, PRICED FOR EACH! ...more
Kennametal HSK63A Metric Drill Combination Holder SEF100120RHSK63AM
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, Kennametal HSK63A Metric Drill Combination Holder, model SEF100120RHSK63AM, used condition. : Cutting Dia:.393701in, Body Dia: 1.496063in, Usable L: 3.503937in, 2 Cutting Edges. Ideal for industrial applications., Spec Sheet:, Kennametal HSK63A Metric Drill Combination Holder, model number: SEF100120RHSK63AM ...more
Kennametal Toolholders, Set of 6 - 3/4 & 5/8 Shanks
Machinery Central | Louisville, KY
Category: Tool Holders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Kennametal
, Set of 6 Kennametal toolholders, featuring five 3/4" and one 5/8" shanks. Includes models like DTFNLS-123 and SCGPL-83V. Ideal for professionals seeking reliable tooling solutions. Used condition, diverse applications., Spec Sheet:, Kennametal Toolholders, Set of 6 - 3/4 & 5/8 Shanks, 5, 3/4" Shanks, 1, 5/8" ...more
