go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Screw Type Injection Molding Machine in Arizona

warning
50 Results

15 Ton, 0.36 oz., Battenfeld #MicroPower-15/10, injection molding machine, 9.44" x 15.74" platens, Unilog B8 Control, 2021

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: MICROPOWER 15/10 UNILOG B8
Year: 2021
Used Battenfeld MicroPower 15/10 Unilog B8 (2021) Injection Molding Machine for Sale. This micro-molding press is rated at 15 Ton clamping capacity with a 0.36 oz shot size and a Unilog control. Platen size is 9.44″ x 15.74″, with 15.74″ max daylight, minimum/maximum mold height of ...more

25 Ton, 2.3 oz., Arburg #Allrounder-275V-250-100, Vertical Injection Molding Machine, 14.76" x 18.7" platens, 8.86" open stroke, 9.84" max. mold height, Selogica control, 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: ALLROUNDER 275V 250-100
Year: 2008
Used Arburg Allrounder 275V 250-100 (2008) Injection Molding Machine for Sale. This vertical press is rated at 25 ton clamp with a 2.3 oz shot size and a 30mm screw and barrel, running under Arburg’s Selogica control. Platen size is 14.76″ x 18.7″, with minimum and maximum mold height of 5.91″ ...more

28 Ton, 0.5 oz., Arburg #270S-250-60, Injection Molding Machine, 10.62" x 10.62" tie bars, 15.98" x 16.06" platen, 18.7" dl, 10.82" mold stroke, Selogica control, 230 V., 2000

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 270S-250-60
Year: 2000
Used Arburg 270S-250-60 (2000) Injection Molding Machine for Sale. This press is rated at 28 ton with a 0.5 oz shot size, tie bar spacing of 10.62″ x 10.62″ and platen size of 15.98″ x 16.06″. Max daylight is 18.7″, minimum mold height is 7.87″ and mold stroke is 10.82″. It ...more

44 Ton, 1.2 oz., Nissei #ES400, injection molding machine, 12.2" tie bars, 17.9" platen, toggle clamp, 21.3" daylight, NC9300T, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES400
Year: 2001
Used Nissei ES400 (2001) Injection Molding Machine for Sale. This pre-owned Nissei plastic injection molding machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Nissei Injection Molding Machine, please feel free to contact us. ...more

45 Ton, 1.6 oz., Haitian #Zhafir-VE400II, vertical injection molding machine, 12.6" x 11.02" tie bars, Keba Control, 2015

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Haitian
Model: ZHAFIR VE400II
Year: 2015
Used Haitian Zhafir VE400II (2015) Injection Molding Machine for Sale. This all-electric press is rated at 45 ton clamping capacity with a 1.6 oz shot size. Tie bar spacing measures 12.6″ x 11.02″ with a platen size of 18.11″ x 17.32″, and minimum/maximum mold height is 5.91″ to ...more

Get email updates for newly added Screw Type Injection Molding Machine

Screw Type Injection Molding Machines (also known as screw injection molding presses) are machines that use a rotating screw to inject molten plastic or rubber into molds for precise shaping. Commonly used in industries like automotive, electronics, and packaging, they are ideal for producing high-quality, complex plastic or rubber parts. These machines are essential for efficient, high-speed production and consistent molding of materials.

60 Ton, 0.6 oz., Nissei #DCE60-2E, two-shot injection molding machine, 19.5" rotary platen, Tact Control, 2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: DCE60-2E
Year: 2012
Used Nissei DCE60-2E (2012) Injection Molding Machine for Sale. This two-shot machine is rated at 60 Ton clamp capacity with shot sizes of 0.43 oz (main) and 0.60 oz (secondary). It carries a 19.5″ diameter rotary platen, 20.5″ x 20.5″ platens, and Tact Control. Power requirement is 230V, and the ...more

65 Ton, 2.4 oz., Arburg #370A-600-100, Injection Molding Machine, 14.5" x 14.5" tie bars, 20.1" x 20.1" platens, air blow, 460 V., 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 370A 600-100
Year: 2008
Used Arburg 370A 600-100 (2008) Injection Molding Machine for Sale. This all-electric style press is rated at 65 ton clamping capacity with a 2.4 oz shot size, platens measuring 20.1″ x 20.1″ and tie bar spacing of 14.5″ x 14.5″. Power requirement is 460V. The machine is air blow and shows less ...more

66 Ton, 2.3 oz., Nissei #ES600, injection molding machine, 16" x 13.6" tie bars, toggle clamp, 24" daylight, NC9300T control, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES600
Year: 2001
Used Nissei ES600 (2001) Injection Molding Machine for Sale. This toggle clamp machine offers 66 ton clamping capacity with a 2.3 oz shot size, making it suited to small part production. Tie bar spacing measures 16″ x 13.6″, with a clamp stroke of 10.2″, minimum daylight of 6.7″ and maximum ...more

72 Ton, 2.84 oz., Battenfeld #HM65-Servopower, injection molding machine, 14.57" x 12.6" tie bars, Unilog B6 Control, 2012 (2 available)

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: HM65 SERVOPOWER
Year: 2012
Used Battenfeld HM65 Servopower (2012) Injection Molding Machine for Sale. This 72 ton press has a shot size of 2.84 and tie bar spacing of 14.57″ x 12.60″, with a max daylight of 39.56″ and a minimum/maximum mold height of 8.89″. Machine control is Unilog B6. ejector, Wittmann W702 robot, core ...more

85 Ton, 5 oz., Van Dorn #85HT5, Injection Molding Machine, 28" dl, 12" clamp stroke, 16" x 13.6" tie bar spacing, 22.8" x 20.4" platen, Pathfinder 2500 control, 1996

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 85HT5
Year: 1996
Used Van Dorn 85HT5 (1996) Injection Molding Machine for Sale. This toggle clamp press is rated at 85 ton with a 5 oz shot size. Platen size measures 22.8″ x 20.4″ with tie bar spacing of 16″ x 13.6″. Clamp stroke is 12″, maximum daylight is 28″, and minimum/maximum mold height runs ...more

88 Ton, 1.72 oz., Arburg #1200T-800-150, rotary table injection molding machine, 47" x 47" platens, Selogica Control, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 1200T-800-150
Year: 2001
Used Arburg 1200T-800-150 (2001) Injection Molding Machine for Sale. This 88 ton press has a 1.72 oz shot size and a Selogica control, with 47″ x 47″ platens and an 11.8″ clamp stroke. Maximum daylight is 21.6″ and minimum mold height is 9.8″. The machine shows 51,042 auto hours. It is a ...more

110 Ton, 3.3 oz., Nissei #TD110E-9E, injection molding machine, 25.4" x 16.1" platens, NC9300T Control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: TD110E-9E
Year: 2003
Used Nissei TD110E-9E (2003) Injection Molding Machine for Sale. This 110 ton machine has a 3.3 oz shot size and a platen size of 25.4″ x 16.1″, with 17.72″ maximum daylight and a minimum/maximum mold height of 11.84″/27.56″. It runs an NC9300T control and requires 230 volt power. The ...more

110 Ton, 3.4 oz., Toyo #Si-110II, injection molding machine, 16.14" x 16.14" tie bars, PLCS-10 Control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Toyo
Model: SI-110II
Year: 2003
Used Toyo Si-110II (2003) Injection Molding Machine for Sale. This all-electric press is rated at 110 Ton clamp force with a 3.4 oz shot size, tie bar spacing of 16.14″ x 16.14″, and platen size of 22.83″ x 22.83″. Minimum and maximum mold height is 5.91″ and 20.08″, with a ...more

110 Ton, 3.59 oz., Niigata #MDVP110X, vertical injection molding machine, 18.11" x 18.11" max mold, 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Niigata
Model: MDVP110X
Year: 2008
Used Niigata MDVP110X (2008) Injection Molding Machine for Sale. This all-electric press is rated at 110 Ton clamping capacity with a 3.59 oz shot size. Minimum and maximum mold height is 11.81″ to 15.74″, with 26.77″ maximum daylight and a maximum mold size of 18.11″ x 18.11″. The ...more

110 Ton, 4.8 oz., JSW #J100ADS-110U, Electric Injection Molding Machine, 35.8" dl, 21.65" max. mold height, 18.11" x 18.11" tie bar spacing, Syscom 5000 control, 342 hours, 2020

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Jsw
Model: J100ADS-110U
Year: 2020
Used JSW J100ADS-110U (2020) Injection Molding Machine for Sale. This all-electric press is rated at 110 ton clamping force with a 4.8 oz shot size. Platen size is 24.41″ x 24.41″ with tie bar spacing of 18.11″ x 18.11″. Maximum daylight is 35.83″, minimum and maximum mold height is ...more

120 Ton, 1.5 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 13.8" clamp stroke, Tact IV, 2014

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. Tie bar spacing is 16.5″ x 16.5″ with platens measuring 23.9″ x 23.9″, a maximum ...more

120 Ton, 2 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 29.9" daylight, Tact control, 2014

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamp force with a 2 oz shot size. Tie bar spacing measures 16.5″ x 16.5″, platen size is 23.9″ x 23.9″, and maximum daylight is 29.9″. The machine runs a Tact control and is ...more

120 Ton, 2.7 oz., Arburg #Allrounder-470S-1100-170, Injection Molding Machine, 18.5" x 18.5" tie bar, 25" x 25" platen, 33.4" dl, 19.6" max. mold height, Selogica control, 2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: ALLROUNDER 470S 1100-170
Year: 2012
Used Arburg Allrounder 470S 1100-170 (2012) Injection Molding Machine for Sale. This machine offers 120 ton clamping capacity with a 2.7 oz shot size and runs on a Selogica control at 460V. Platen size is 25″ x 25″ with 18.5″ x 18.5″ tie bar spacing, 33.4″ maximum daylight, and a ...more

120 Ton, 6.19 oz., Battenfeld #HM110/525, injection molding machine, 18.5" x 15.53" tie bars, Unilog B6 Control, 2013

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: HM110/525
Year: 2013
Used Battenfeld HM110/525 (2013) Injection Molding Machine for Sale. This machine has a 120 ton clamping capacity and a 6.19 shot size, with tie bar spacing of 18.50″ x 15.53″ and a maximum daylight of 30.51″. Minimum and maximum mold height is listed at 10.83″. Machine control is Unilog B6. ...more

2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: MTS-125
Year: 2012
Used Cincinnati Milacron MTS-125 (2012) Injection Molding Machine for Sale. This machine offers 125 ton clamp capacity with a 5.8 oz shot size, making it suited to small and mid-size tooling work. Platen size is 25.7″ x 25.7″ with tie bar spacing of 17.1″ x 17.1″, and maximum daylight measures ...more

155 Ton, 10.12 oz., Calypso #AX155, injection molding machine, 14.96" x 14.96" tie bars, Keba i2880 Touch Screen Control, 2023

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Calypso
Model: AX155
Year: 2023
Used Calypso AX155 (2023) Injection Molding Machine for Sale. This machine is rated at 155 Ton clamp force with a 10.12 oz shot size. Tie bar spacing measures 14.96″ x 14.96″, with 25″ x 25″ platens, a 14.96″ opening stroke and a 4.72″ ejection stroke. Control is a Keba i2880 touch ...more

163 Ton, 1.28 oz., LWB Steinl #VRRS-B-1600/SP100b-LIM, Liquid Silicone Injection Molding Machine, 19.68" x 21.65" platen, tie-barless, 15.55" clamp stroke, Flex control, 480 Volt, 2017

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Lwb Steinl
Model: VRRS-B 1600/SP100B LIM
Year: 2017
Used LWB Steinl VRRS – B 1600/SP100b LIM (2017) Injection Molding Machine for Sale. This liquid silicone injection molding machine is rated at 163 ton capacity with a 15.55″ clamp stroke and a 1.28 oz shot size. Platen size measures 19.68″ x 21.65″, and the machine uses a tie-barless clamp ...more

170 Ton, 10.9 oz., Van Dorn #170HT, injection molding machine, 20" x 20" tie bars, Pathfinder 3000 Control, 1999

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 170HT
Year: 1999
Used Van Dorn 170HT (1999) Injection Molding Machine for Sale. This 170 ton press has a 10.9 oz shot size, 20″ x 20″ tie bar spacing, and 29″ x 29″ platens, with 35″ maximum daylight and a 6″ to 18″ minimum/maximum mold height. Ejector stroke is 4″, and the machine runs ...more

180 Ton, 11.5 oz., Toshiba #EC180V21-8, Electric Injection Molding Machine, 20.1" x 20.1" tie bar, 29.1" x 29.1" platen, 37.4" dl, 19.7" max. mold height, 17.7" clamp stroke, 2002

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Toshiba
Model: EC180V21-8
Year: 2002
Used Toshiba EC180V21-8 (2002) Injection Molding Machine for Sale. This all-electric press is rated at 180 ton clamping capacity with an 11.5 oz shot size. Tie bar spacing measures 20.1″ x 20.1″ and platens are 29.1″ x 29.1″, with 37.4″ maximum daylight, a minimum mold height of ...more

198 Ton, 1.2 oz., Nissei #NEX180-III5E, Electric Injection Molding Machine, 20.9" x 20.9" tie bar spacing, 0.87" screw diameter, Tact control, 7,000 hours, 230 Volt, 2007

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX180-III5E
Year: 2007
Used Nissei NEX180-III5E (2007) Injection Molding Machine for Sale. This all-electric press is rated at 198 ton clamping capacity with a 1.2 oz shot size and a 22mm screw diameter. Tie bar spacing measures 20.9″ x 20.9″, and the machine runs on a Tact control with 230V power. Approximate dimensions are ...more

225 Ton, 15 oz., Cincinnati Milacron #MT225, injection molding machine, 22.4" x 22.4" tie bars, Mosaic Control, 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: MT225
Year: 2008
Used Cincinnati Milacron MT225 (2008) Injection Molding Machine for Sale. This pre-owned Cincinnati Milacron plastic injection molding machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Cincinnati Milacron Injection Molding Machine ...more

230 Ton, 25.4 oz., Van Dorn #230HT1220, Injection Molding Machine, 42" dl, 20" clamp stroke, 22" x 22" tie bar spacing, 32" x 32" platen, Pathfinder 5000 control, 460 V., 2000

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 230HT1220
Year: 2000
Used Van Dorn 230HT1220 (2000) Injection Molding Machine for Sale. This is a 230 ton press with a 25.4 oz shot size, 32″ x 32″ platens and 22″ x 22″ tie bar spacing. Clamp stroke is 20″, with 42″ maximum daylight and a 7″ minimum mold height. Ejector stroke measures ...more

237 Ton, 16.9 oz., Nissei #FNX220-50A, Injection Molding Machine, 24" x 24" tie bars, 34.3" x 34.3" platens, 41.3" daylight, 29.9" clamp stroke, Tact control, 2007

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: FNX220-50A
Year: 2007
Used Nissei FNX220-50A (2007) Injection Molding Machine for Sale. This Nissei is rated at 237 ton clamp capacity with a 16.9 oz shot size and a Tact control. Platen size is 34.3″ x 34.3″ with tie bar spacing of 24″ x 24″, maximum daylight of 41.3″, clamp stroke of 29.9″, and a ...more

2006

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 570C 2000 800
Year: 2006
Used Arburg 570C 2000 800 (2006) Injection Molding Machine for Sale. This press is rated at 242 ton clamp force with a 15.3 oz shot size, platens measuring 31.3″ x 31.3″ and tie bar spacing of 22.44″ x 22.44″. Clamp stroke is 25.59″, max daylight is 37.4″, and minimum mold height is ...more

245 Ton, 20.8 oz., Toyo #TM-245H2, All-Electric Injection Molding Machine, 24.02" x 24.02" tie bars, 32.28" x 32.28" platens, 20.47" clamp stroke, PLCS-11 control, 2006

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Toyo
Model: TM-245H2
Year: 2006
Used Toyo TM-245H2 (2006) Injection Molding Machine for Sale. This all-electric press offers 245 ton clamping capacity with a 20.8 oz shot size. Tie bar spacing measures 24.02″ x 24.02″ with platens of 32.28″ x 32.28″ and a clamp stroke of 20.47″. The machine runs a Plcs-11 control and is ...more

275 Ton, 14.6 oz., Cincinnati Milacron #Roboshot-S2000I-275B, Injection Molding Machine, 27.9" x 25" tie bars, 23.6" clamp stroke, Fanuc control, 2015

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: ROBOSHOT S2000I-275B
Year: 2015
Used Cincinnati Milacron Roboshot S2000I-275B (2015) Injection Molding Machine for Sale. This all-electric press offers 275 ton clamping capacity with a 14.6 oz shot size and runs on a Fanuc control. Tie bar spacing measures 27.9″ x 25″, with platens at 40.5″ x 37.7″, a clamp stroke of ...more

300 Ton, 25.4 oz., Van Dorn #300HT-1220, injection molding machine, 25" tie bars, 37" platen, 49" daylight, Pathfinder 5000, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 300HT-1220
Year: 2001
Used Van Dorn 300HT-1220 (2001) Injection Molding Machine for Sale. This machine is rated at 300 Ton clamp capacity with a 25.4 oz shot size, making it suited to a broad range of mid-size molding work. Tie bar spacing is 25″ x 25″ with 37″ x 37″ platens, 49″ maximum daylight, an 8″ ...more

300 Ton, 63.6 oz., Engel #Insert-3550H/330US, insert injection molding machine, 59" x 29.5" platens, CC200 Control, 2009

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Engel
Model: INSERT 3550H/330US
Year: 2009
Used Engel Insert 3550H/330US (2009) Injection Molding Machine for Sale. This vertical insert press is rated at 300 Ton clamp capacity with a 63.6 oz shot size and runs on a CC200 control at 480V. Platen size is 59.05″ x 29.52″, with a minimum mold height of 11.81″, 19.68″ clamp stroke and ...more

315 Ton, 22.01 oz., Niigata #MD310W6000, Electric Injection Molding Machine, 28.74" x 28.74" tie bars, 51.97" dl, 28.25" max. mold height, 5.91" ejector stroke, 21,599 hours, 2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Niigata
Model: MD310W6000
Year: 2012
Used Niigata MD310W6000 (2012) Injection Molding Machine for Sale. This all-electric press is rated at 315 ton clamping force with a 22.01 oz shot size. Platens measure 36.61″ x 36.61″ with 28.74″ x 28.74″ tie bar spacing, minimum and maximum mold height of 12.6″ and 28.25″, maximum ...more

330 Ton, 14 oz., Cincinnati Milacron #S-2000i330B-416G, injection molding machine, 31.9" x 28" tie bars, Fanuc Control, robot included, 2011

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: S-2000I330B-416G
Year: 2011
Used Cincinnati Milacron S-2000i330B-416G (2011) Injection Molding Machine for Sale. This 330 ton press carries a 14 oz shot size, 31.9″ x 28″ tie bar spacing and 44.50″ x 40.60″ platens, with minimum and maximum mold heights of 11.8″ and 25.6″, 49.21″ maximum daylight and a ...more

337 Ton, 15.76 oz., Battenfeld #EP300/1300, injection molding machine, 28.35" x 30.31" tie bars, Unilog B6S Control, 2013

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: EP300/1300
Year: 2013
Used Battenfeld EP300/1300 (2013) Injection Molding Machine for Sale. This machine offers 337 ton clamping capacity with a 15.76 oz shot size, tie bar spacing of 28.35″ x 30.31″, and platen size of 44.5″ x 45.5″. Maximum daylight is 49.21″, with mold height from 9.8″ to 25.6″ ...more

337 Ton, 37.2 oz., Husky #Hyelectric-H300-RS80/65, Injection Molding Machine, 30.7" x 30.7" tie bars, 54.1" dl, 30.5" max. mold height, 5.9" ejector stroke, stack mold capable, 2014

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Husky
Model: HYELECTRIC H300 RS80/65
Year: 2014
Used Husky Hyelectric H300 RS80/65 (2014) Injection Molding Machine for Sale. This machine offers 337 ton clamp capacity with a 37.2 oz shot size, platen size of 42.5″ x 44.5″ and tie bar spacing of 30.7″ x 30.7″. Clamp stroke is 42.3″ with a max daylight of 54.1″, minimum and ...more

395 Ton, 42 oz., Netstal #S-3500-2150, injection molding machine, 28.34" x 28.35" tie bars, Netstal Control, 2010

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Netstal
Model: S 3500-2150
Year: 2010
Used Netstal S 3500-2150 (2010) Injection Molding Machine for Sale. This machine is rated at 395 Ton clamping capacity with a 42 oz shot size. Tie bar spacing is 28.34″ x 28.35″, with platens measuring 44.37″ x 41.73″. Maximum daylight is 27.55″, and minimum and maximum mold height are ...more

400 Ton, 40 oz., Van Dorn #400HT1920, Injection Molding Machine, 28" x 28" tie bars, 42" x 42" platen, 54" dl, 26" clamp stroke, Pathfinder 5000 control, 2005

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 400HT1920
Year: 2005
Used Van Dorn 400HT1920 (2005) Injection Molding Machine for Sale. This press is rated at 400 ton clamp capacity with a 40 oz shot size, 28″ x 28″ tie bar spacing and 42″ x 42″ platens. Clamp stroke is 26″, maximum daylight is 54″ and ejector stroke is 6″. Machine control is ...more

400 Ton, 42.5 oz., Van Dorn #400HT1920, Injection Molding Machine, 54" dl, 26" clamp stroke, 28" x 28" tie bar spacing, 42" x 42" platen, Pathfinder 5000 control, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 400HT1920
Year: 2001
Used Van Dorn 400HT1920 (2001) Injection Molding Machine for Sale. This 400 ton machine has a 42.5 oz shot size, tie bar spacing of 28″ x 28″, and platen size of 42″ x 42″. Clamp stroke is 26″ with 54″ maximum daylight and a 6″ ejector stroke. Control is a Pathfinder 5000, and ...more

495 Ton, 53.4 oz., JSW #J450ADS-1400H, Two-Shot Injection Molding Machine, 35.43" x 31.89" tie bars, 35.4" max. mold height, 66.93" dl, 31.5" clamp stroke, Syscom 5000i control, 2019, (2 available)

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Jsw
Model: J450ADS-1400H
Year: 2019
Used JSW J450ADS-1400H (2019) Injection Molding Machine for Sale. This two-shot press offers 495 ton clamping capacity, a 53.4 oz shot size with a 0.5 oz second shot, and tie bar spacing of 35.43″ x 31.89″. Platens measure 51.18″ x 47.64″, with max daylight of 66.93″, mold height from ...more

500 Ton, 37 oz., Toyo #Si-500-II, Injection Molding Machine, 36.02" x 36.02" tie bars, 48.03" x 48.03" platens, 35.4" max. mold height, 31.49" clamp stroke, PLCS-11 control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Toyo
Model: SI-500-II
Year: 2003
Used Toyo Si-500-II (2003) Injection Molding Machine for Sale. This 500 ton machine carries a 37 oz shot size and runs on a PLCS-11 control. Tie bar spacing is 36.02″ x 36.02″ with platens measuring 48.03″ x 48.03″, a clamp stroke of 31.49″, minimum and maximum mold heights of ...more

500 Ton, 48 oz., Van Dorn #Spectra-500SP1920, injection molding machine, 34.9" x 34.9" tie bars, Pathfinder 3000 Control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: SPECTRA 500SP1920
Year: 2003
Used Van Dorn Spectra 500SP1920 (2003) Injection Molding Machine for Sale. This 500 ton press has a 48 oz shot size, tie bar spacing of 34.9″ x 34.9″, and platen size of 49.6″ x 49.2″. Max daylight is 69″, clamp stroke is 43″, and minimum mold thickness is 14.2″. Machine ...more

500 Ton, 52 oz., Woojin #TH500S, injection molding machine, 34.25" x 32.28" tie bars, 49.6" platen, KEBA control, 25,000 hours, 2017

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Woojin
Model: TH500S
Year: 2017
Used Woojin TH500S (2017) Injection Molding Machine for Sale. This 500 ton machine offers a 52 oz shot size and runs on a KEBA control. Platen size is 49.6″ x 49.6″, with tie bar spacing of 34.25″ x 32.28″ and 60.23″ max daylight. Minimum and maximum mold height is 13.77″ and ...more

500 Ton, 60 oz., Van Dorn #500HT-2800, Injection Molding Machine, 32.5" x 32.5" tie bars, 47.8" x 47.8" platen, 61" dl, 30" clamp stroke, 3.74" screw diameter, Pathfinder 3000 control, 2000

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 500HT-2800
Year: 2000
Used Van Dorn 500HT-2800 (2000) Injection Molding Machine for Sale. This 500 ton press carries a 60 oz shot size with a 95 mm screw diameter and runs on a Pathfinder 3000 control. Tie bar spacing is 32.5″ x 32.5″ with platens measuring 47.8″ x 47.8″, 61″ maximum daylight, 30″ clamp ...more

650 Ton, 89.6 oz., Van Dorn #650HT-4300, injection molding machine, 36" tie bars, 53" platen, 69.5" daylight, Pathfinder 5000, 2006 (2 available)

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 650HT-4300
Year: 2006
Used Van Dorn 650HT-4300 (2006) Injection Molding Machine for Sale. This machine offers 650 ton clamping capacity with an 89.6 oz shot size, tie bar spacing of 36″ x 36″, and platen size of 53″ x 53″. Maximum daylight is 69.5″, with minimum and maximum mold heights of 12″ and ...more

850 Ton, 362 oz., Cincinnati Milacron #VL-850, injection molding machine, 45.3" x 37.4" tie bars, Mosaic Control, Cincinnati rebuilt 2016

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: VL-850
Used Cincinnati Milacron VL-850 Injection Molding Machine for Sale. This 850 ton press has a shot size of 362 oz, tie bar spacing of 45.3″ x 37.4″, and platen size of 66.1″ x 58.1″. Maximum daylight is 96.02″ with a minimum mold height of 44.06″, clamp stroke of 52″, and ...more

950 Ton, 200 oz., Nissei #FV9200-600L, Injection Molding Machine, 52.4" x 52.4" tie bar spacing, 70.8" x 70.8" platen, 42.3" max. mold thickness, 88.9" dl, 46.2" clamp stroke, 1999

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: FV9200-600L
Year: 1999
Used Nissei FV9200-600L (1999) Injection Molding Machine for Sale. This 950 ton press offers a 200 oz shot size, tie bar spacing of 52.4″ x 52.4″, and platen size of 70.8″ x 70.8″. Minimum and maximum mold thickness is 19.7″/42.3″, with 88.9″ max daylight, a 46.2″ clamp ...more